Pu foam
Expansion Joint Filler Foam is a cross linked, closed cell, polyethylene foam that is flexible, compressible, durable, tear-resistant, and moisture resistant. It has good recovery from compression, is resistant to common acids, alkalies, and chemicals, and is CFC free. This industrial foam product has a variety of applications in filling an expansion joint gap in road, bridge and building construction, and wherever low load joint fillers are required in concrete and construction work. industrial Filler foam can be used as a gap filler in any area where concrete expansion, ground or building movement would otherwise cause damage without the gap. This expansion joint filler foam will also act as a backup strip to support sealants in floor and wall joints and can be used as lagging to create space around pipes and vessels. All rolls are 25 metres long and 10mm thick, and are available in widths from 50mm to 300mm. All roll widths are available in plain, or with adhesive back for easy application to walls and slab edges. Each roll has a 10mm zip-strip that can be removed prior to the gap being filled with flexible sealant. Flexible Foam Expansion Joint Foam come in multi-packs as shown below. Prices are for multiple rolls (per pack). It usually comes in the following sizes 50mm wide = 20 rolls per pack (500m) 75mm wide = 15 rolls per pack (375m) 100mm wide = 12 rolls per pack (300m) 125mm wide = 9 rolls per pack (225m) 150mm wide = 8 rolls per pack (200m) 200mm wide = 6 rolls per pack (150m) 250mm wide = 5 rolls per pack (125m) 300mm wide = 4 rolls per pack (100m) Roll Dimensions: 25m long x 10mm thick x 50-300mm wide. For expansion joint foams in other thicknesses in sheet and roll form,and cut to profile, please contact our office directly. Hot sale various high quality PE foam roll, XPE foam, compounding foam, heat insulation filler foam from China leading manufacturer. Our products are efficient, cost effective and deliver more benefits. Welcome to choose us!
A dynamic product to match virtually all packaging requirements. It fulfils your requirements for packaging, transportation and marketing objectives that are functional and cost-effective. Expanded polyethylene foam (EPE / PE) is available in EPE foam sheets and EPE foam roll forms. Also known as high-density polyethylene foam (HDPE) and low density polyethylene foam (LDPE) Above all, (EPE / Hitlon) primary foam packaging material ensures total protection of your product. Technical Specification: SL NO PROPERITY UNIT SPECIFICATION 1 Density Kg/m 3 25 to 45 2 Tensile Strength at ambienttemp Kg/m 3 MD 2.5 to 5 TD 1.8 to 3.5 3 Elongation % MD80 to 100 TD 42 to 70 4 Compression Strength at 10% Kg/m 2 0.05 to 0.20 5 Water absorption after 96 hrs Volume 0.01 to 0.50 6 Water Vapour Transmission Gm/m 3 20 to 25 7 Buoyancy (Fresh Water) Kg/m 3 915 to 940 8 Thermal C conductivity k/ca/M.Hr.c 0.020 to 0.028 9 Service Temperature oc -50 to +70 Applications: Packaging of consumer durables and white goods like TV covers, Refrigerator packaging, LCD / LED packaging etc. Packaging of electronics & machinery. Fragile item packaging - packaging of glass sheets, glassware, mirrors, picture frames, ceramics, chinaware, pottery, handicrafts etc.
Normal Silicon 245 g 24psc inbox hight Silicon 280 g 24 psc inbox Large Silicon 320 g 24 psc inbox heater Silicon 320 g 24 psc inbox FOAM : 800 g - 600 g - 350 g container 40f take around 3280 box container 20f takes around 2200 box
Foam Roll
Foam glass / cellular glass prefabricated products Density 140-200 kg/m3 Thickness 30-160 mm Length and width X *X m Compressive strength 0.6 Mpa Heat conduct coefficient 0.037-0.066 W/m·K Permeability coefficient 0.007 Ng/pa*s*m Safe Temperatures -260 -- +500 Non-combustible A-grade
In 23 * 11 * 8 cm/piece of floral foam quality standards: 1. An open-celled phenol foam that readily absorbs water and is used as a base for flower arrangements. 2.Foliage green in color. 3.Density: 25KG/M³ 4.Water absorption time: ABT. 1 minute (60 secs) 5.Dry brick weight: 45g(+/- 3g) 6.Wet brick weight: 2000g (+/- 15g) 7.Water drainage / leakage: 0g 8.Cell Structure: Fine 9.Brown water: No 10.PH level: PH 5.8-6.5 11.Water retain period: 7 days & above (Depend on the local climate)
Our company also have one floral foam factory , the factory's name is Hebei Huiya Floral Foam special equipment Co.,Ltd. So we can give you the good price and we can guarantee the quality of our floral foam . Wet floral foam for flower We are a professional enterprise of highly efficient and energy-saving equipment and technology, integrating research and development, production, marketing and service. Our main business range includes: Ø The floral foam production Line Ø Floral foam Machines & Technology Ø Chemical materials for making floral foam Ø Various size of floral foam We are specializing in exporting wet floral foam, floral foam machine, technology and chemial materials.
In 23 * 11 * 8 cm/piece of floral foam quality standards: 1. An open-celled phenol foam that readily absorbs water and is used as a base for flower arrangements. 2.Foliage green in color. 3.Density: 25KG/M³ 4.Water absorption time: ABT. 1 minute (60 secs) 5.Dry brick weight: 45g(+/- 3g) 6.Wet brick weight: 2000g (+/- 15g) 7.Water drainage / leakage: 0g 8.Cell Structure: Fine 9.Brown water: No 10.PH level: PH 5.8-6.5 11.Water retain period: 7 days & above (Depend on the local climate)
Color: Gray, White, Black and etc. Size: 2200*1100*20/30/40/50/60mm Hardness: 45/60
Density: 2.2pcf Size: 2750*610*50mm Color: White
Polyurethane foam; 750ml can/bottle; factory price
specifications: PE FOAM KP+PE WOVEN CLOTH+PE FORM Paper Type:Specialty Paper Use: Industrial Packaging Feature:protecting Pulp Material: 100 % virgin wood pulp Size:As customer requirement ,Roll or Sheet Place of Origin:South Korea Packing: Export standard packaging
EPE Foam
Greenmax foam crusher can smash the waste plastic material into granules and beads. Greenmax have two kinds of machine contains foam crusher and eps beads crusher. As you can see, an efficient heavy crusher driven by two powerful motors is able to break foams of all size and density. And the sharp cutter can shreds all kinds of foam, especially pe foam, eps, into 20-50 mm size small pieces.
For mattress, cushion, carpet underlay, ironing table rebonded foam. Good tension. All kinds of density is available.
Nickel Foam is widely used in the field of nickel-metal hydride, nickel cadmium, fuel cell and other batteries. Nickel Foam typed positive and negative electrodes, can doublely improve battery performance. Nickel Foam-carbon composite electrode material is also an ideal material for lithium batteries. This kind of rechargeable battery is widely used in mobile phones, computers, electric scooters, electric bicycles, hybrid cars, electric toy cars, cordless power tools, and electronic digital products. Nickel Foam is also an important battery electrode material, used as current collectors in nickel-metal hydride batteries and various batteries. Continuous nickel foam is mainly used as the skeletal material for batteries. Owing to their born physical and chemical unique structures,nickel foam has been widely used in a variety of industrial field,such as battery,filtration,environmental protection and so on. Their profound performance has won great praise among customers all over the world. Purity:99% Porosity:95% Pore size:75-130PPI Thickness: (0.5-2.5)±0.05mm Density:(280-2000)±30g/m2 Tensile Strength: Longitudinal:1.25N/mm2 Transversal 1.00N/mm2 Elongation: Vertical:5% Lateral 12% Max Width: 930mm
Copper Foam has the good performance of thermal conductivity,it has been widely used in electronic / electrical and electronic components of the heat field Due to copper Foams' excellent conductivity, it has been paid great industrial concerns in the field of electrode material,nickel-zinc batteries and electric double layer capacitors field. Because of copper foams' unique structure and harmless performance,it is an excellent miedia for medicial field and water purification application. Features 1. Excellent mechanical property and processability; 2. Extraordinary electricity and heat conductivity; 3. Massive intricate, lattice-like inner structure 4. Excellent ability of corrosion resistance, superior tensile strength, favorable ductility; 5. Magnificent electromagnetic shielding ability. Related parameters Pore size: 75~130PPI Density: 280~2000g/m2 Thickness:0.5mm~3mm
Conductive foam is based on the raw material of Polyurethane foam sponge. After the PVD conductive treatment, electro-plating treatment of Nickel, Copper and other metal, the raw material will be conductive in all directions. Hunan Ted New Material Conductive foams have the following excellent performance of good conductivity, strong bonding strength, High shielding effect, Nice resilience ability, stable and reliable performance and so on. Conductive foams are the most widely used EMI/ESD materials. Conductive foams are mainly used in the Smart Phones, plasma display panel TV, liquid crystal display, medical instruments and so on.
Place of Origin: Guangdong, China (Mainland) Brand Name: Tengda Quality: Grade A Color: Mix Light Color Density: 25-30kg/cbm Weight: 230-250 KGS/ bale Packing: Compressed in bale Function: Make rebonded foam Foam skin: 0-100 % can be choosed Clean and dry: 100% Rebonded foam:0% Bare skins:0% Ester type foam:0% Laminated fabric or PVC:0% Visco memory foam:0% Factory sweepings:0% Old used foam:0% Packing:compressed in bale Loading quantity: 40 HQ can load about 20 tons Packing & shipping Packing: Compressed in bales and each bale is about 250kg which is the best for loading. One 40HQ can load about 20 to 21 tons. Stable supply:300 to 400 tons per month new stock come in. Delivery time: Maximum 10 days once the order is confirmed.
