Product Category: Fashion Boots Suitable Age Groups: Adult Upper Material: Two layers of Cowhide Sole Material: Rubber Inner Material: Wool Boot Material: PU Boot Inner Material: PureWool Applicable Gender: Female Toe Shape: Round Head Tube Height: Tall Barrel Shoe Style: Side Zipper Heel Height: Middle heel (3-5cm) Color: Black wool lining Size: 35,36,37,38,39,40,41,42,43 Item Number: FBOT-05
wit 2.1 meter length,sterile
wit 2.1 meter length,sterile
Product Category: Martin Boots Suitable Age Groups: Adult Upper Material: Genuine Leather Inner Material: Wool Boot Material: PU Boot Inner Material: Pure Wool Applicable Gender: Female Toe Shape: Round Head Tube Height: Tall Barrel Shoe Style: Side Zipper Heel Height: Middle heel (3-5cm) Color: Black half-leather fleece lining, Black half-leather and full wool, Black full leather, and full wool Size: 35,36,37,38,39,40 Item Number: FBOT-04
Safety Huber Needle Features and Benefits Sterile pack, single use only. Needle-stick prevention, safety assured. Special needle tip design to prevent rubber fragment contamination. Luer connector, equipped with needleless connector, heparin cap, Y three-way. Chassis sponge design for a more comfortable application. High pressure resistant central line with 325 P.S.I Two holes connector optional. MDR 2017/745 USA FDA 510K Refer Standards ISO 10555-6:2015 Intravascular catheters - Sterile and single-use catheters Part 6: Subcutaneous implanted ports. ISO 8536-4: 2010 Infusion equipment medical use- Part 4: Infusion Sets for single use, gravity feed. ISO 23908:2011 Sharps injury protection Requirements and test methods - Sharps protection features for single-use hypodermic needles, introducers for catheters and needles used for blood Samplings. ISO 7864:2016 Sterile Hypodemic Needles for Single-use requirements and test methods. ISO 9626:2016 Stainless Steel Needle Tubing for the Manufacture of Medical Devices requirements and Test methods. ISO 80369-7: 2016 Small - bore connectors for liquids and gases in healthcare applications. Part 7: Connectors for intravascular or hypodermic applications. ISO 10993-7:2008 Biological Evaluation of Medical Device - Part 7: Ethylene Oxide Sterilization Residuals.
Dr. Odin Phelgum Tube for Suction Machines is suitable for convenient removal of secretion, blood and debris etc per operatively. This tube is used for suctioning oropharyngeal secretion or clears the operative site like fluid, blood, pus and/or gas from a wound or body cavity.
Product Code: MESM 05 ISI & CE Marked Accelerator High-Vacuum. Quality Approved From Bureau of Indian Standards, New Delhi. Anti corrosive Stainless Steel Chassis Noise level of suction apparatus from is 50 dB +/- 03 dB. Electrical Requirement â?? 220~230V, 50Hz, 1Phase. Ideal for MTP / medical / surgical procedures . Rotary Vane Type Vacuum Pump with -740 +/- 10 mm Hg. Free air displacement 40 ~ 60 ltrs/min. Heavy duty HN-65 PU Castors. 320 Watt, 1440 RPM, 0.50 H.P. Electric Motor. 100 mm Vacuum Gauge Non collapsible Silicon tubing 2 X 2.0/2.5 Ltrs. Polycarbonate/Glass jars with overflow safety. Bacterial filter fitted on top.
Ryles Tube with Luer Mount Product Code MED 183 Specifications Sterile individually packed in peelable pouch pack SizeStrength 6 20 FG Total length 105 cm Description Ryles tube is used for nutritional feeding purposes or aspiration of intestinal secretions Manufactured from nontoxic medical grade PVC compound Distal end is coned with steel balls sealed into the tube to facilitate easy insertion Four lateral eyes for efficient drainage The tube is marked at 50 60 and 70 cm from the distal end for accurate placement into the abdomen Radio opaque line provided throughout the tube for X ray visualization Proximal end is provided with Universal Funnel Connecter for easy extension
Raw material: OD of steel strip Ф1250-2000ã?? The ID of steel strip Ф610-762ã?? Width of steel strip 680-2000ã?? The thickness of steel strip 5.0-16.0ã?? Steel coil weight 45T(max) finish pipe: diameter : Φ219.1~ 610 pipe lenght: 8000~12500mm
DESCRIPTIOn: Titanx100 RADIOGRAPHY RATING: 25-100mA, stations 45kVp to 100 kVp in 15 steps OUTPUT: 8KW RECTIFICATION: Full Wave Rectified TIMER: 0.06 to 5 sec DIGITAL DISPLAY : Digital Display of mAs, kV & mA X-RAY TUBE: XD-3/Imported POWER SUPPLY: 230 Voltage AC, 15 Amps LINE REGULATION: 10% 0.6max PROTECTION: Electronic overload Protection TUBE STAND counter Balance Mobile
DESCRIPTION: Titanx RADIOGRAPHY RATING: 25-100mA, stations 45kVp to 100 kVp in 15 steps OUTPUT : 8KW RECTIFICATION: Full Wave Rectified TIMER: 0.06 to 5 sec DIGITAL DISPLAY: Digital Display of mAs, kV & mA X-RAY TUBE: XD-3/Imported POWER SUPPLY: 230 Voltage AC, 15 Amps LINE REGULATION: 10% 0.6max PROTECTION: Electronic overload Protection TUBE STAND: Floor to Ceiling Column Stand
DESCRIPTION: Titanx100 RADIOGRAPHY RATING: 25-100mA, stations 45kVp to 100 kVp in 15 steps OUTPUT : 8KW RECTIFICATION: Full Wave Rectified TIMER: 0.06 to 5 sec DIGITAL DISPLAY: Digital Display of mAs, kV & mA X-RAY TUBE: XD-3/Imported POWER SUPPLY: 230 Voltage AC, 15 Amps LINE REGULATION: 10% 0.6max PROTECTION: Electronic overload Protection TUBE STAND: Counter Balance Mobile
DESCRIPTION- TITANX 100 RADIOGRAPHY RATING- 25-100mA, stations 45kVp to 100 kVp in 15 steps OUTPUT 8KW RECTIFICATION- Full Wave Rectified TIMER- 0.06 to 5 sec DIGITAL DISPLAY- Digital Display of mAs, kV & mA X-RAY TUBE- XD-3/Imported POWER SUPPLY- 230 Voltage AC, 15 Amps LINE REGULATION- 10% 0.6max PROTECTION- Electronic overload Protection TUBE STAND- Spring Balance
Endotracheal Tube Plain
Endotracheal Tube Plain
Endotracheal Tube An endotracheal tube is placed when a patient is unable to breathe on her own; when it is necessary to sedate and "rest" someone who is very ill; or to protect the airway. The tube maintains the airway so that air can pass into and out of the lungs. Endotracheal Tube Brief Introduction-Endotracheal Tube 1. This item is made from non-toxic PVC, consists of tube, spring, cuff, inflation line, valve, pilot balloon, and connector. 2. The reinforced endotracheal tube is used in general anaesthesia, intensive care and emergency medicine for airway management and mechanical ventilation. 3. The tube is inserted into a patient's trachea through the patient's nose or mouth in order to ensure that the airway is not closed off and that air is able to reach the lungs. 4. The endotracheal tube is regarded as the most reliable available method for protecting a patient's airway. Latex free endotracheal tube with cuff without cuff 1.with cuff or without cuff is possible 2.size from 2.0-10.0 3.standard, nasal, Oral preformed 4.clear, soft and smooth Feature: 1.Tube made from Non-toxic PVC, latex free 2. PVC tube contains DEHP, DEHP FREE tube is available 3. Cuff: its great length reduces mucosal irritation by pressure distribution against a wider area of tracheal tissue and provides improved protection against micro aspiration of fluid along the cuff 4. Cuff:it vertically provides elasticity against the tube shaft in order to buffer short-term intratracheal pressure(e.g. coughing), keeping the tube in correct position 5. transparent tube allows indentification for condensation 6. radio opaque line through the tube length for X-ray visualisation 7. gently rounded, drawn in tracheal tube tip for atraumatic and smooth intubation 8. softly rounded Murphy eyes in tube tip is less invasive 9. in blister packing, single use, EO sterilization 10. certified with ,CE, ISO Used An endotracheal tube is placed when a patient is unable to breathe on her own; when it is necessary to sedate and "rest" someone who is very ill; or to protect the airway. The tube maintains the airway so that air can pass into and out of the lungs.
Solest 68 is a formulated ISO VG68 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years service in the field. Designed to maximize lubrication in HFC systems, Solest 68 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminium surfaces for increased system life and improved efficiency. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Soles lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Rotary, Centrifugal, Scroll Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced down-time Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 68, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Solest 68 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
Solest 220 is a formulated ISO VG220 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years service in the field. Designed to maximize lubrication in HFC systems, Solest 220 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminium surfaces for increased system life and improved efficiency. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced down-time Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 220, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Solest 220 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
Solest 220 is a formulated ISO VG220 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years service in the field. Designed to maximize lubrication in HFC systems, Solest 220 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminium surfaces for increased system life and improved efficiency. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced down-time Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 220, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Soles 220 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
Solest 180 is a formulated VG180 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years service in the field. Designed to maximize lubrication in HFC systems, Solest 180 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminium surfaces for increased system life and improved efficiency. This grade offers excellent resistance to dilution in HFC refrigerants. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPIs laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced down-time Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 180, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Soles 180 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
