Drinking Water Tanks When we say the drinking water tank, the primary thing we should think about is  is it food grade. The polyether TPU is used to produce the drinking water tanks, which meets the FDA, totally food grade. Why choose Flixtank Water Tank? 1.� It� 's� food grade. 2.� Flexibility, during shipment and no using, we can pack the tank in small carton to stock. 3.  Economic, over half less than steel tanks. 4.  Less shipping cost, as the package is much smaller than rigid tanks, the flexible drinking water tank can save more on shipment.
Fuel tanks Fuel tanks use for diesel, gasoline(gas), crude oil, Jetfuel(include JP-8), etc.  So there have a wide range of places can use the fuel tanks. Fuel industrial, fuel/oil temporary fuel storage/transportation. Aircraft fuel bladder, which perfectly fits to the air fuel tanks, shape customized. On Yacht, the room in Yacht is limited, then don  t let the auxiliary fuel tanks to waste the places, so flexible fuel tank is a good way, any place, any corner to place this custom fuel tank.  Contact Flixtank to custom the fuel tanks.
Center Enamel Co., Ltd is the industry leader and has been designing and manufacturing and installing Stainless Steel Bolted frac sand storage tanks for more than 30 years. We provide high quality Stainless Steel Bolted frac sand storage tanks. The ability to place the bolted tanks in shipping containers allows us to service the entire world. With more than 10, 000 storage tanks successfully installed in 65 countries and thousands of applications, no other Asian company can match Center Enamelâ??s bulk tank experience in the design, manufacture and installation of bulk storage tanks .We are one of the few manufacturing companies that fabricates our own Stainless Steel Bolted frac sand storage tanks ensuring product quality. The construction speed of the Stainless Steel Bolted storage tank can be increased by three times, saving the construction and life cycle cost for our customer. All tank panels are manufactured in the factory and shipped in full to the construction site in time. Experience, expertise and efficiency make Center Enamel the best choice for buying frac sand silos . Our frac sand storage tanks capacity ranges from 20m�³ to 20,000 m�³, Our Stainless Steel Bolted storage tanks can withstand abrasive wear and have the longest service life of any tank. After decades of field testing and application, Center Enamel bolted steel frac sand storage tank is the best choice for all dry bulk storage tanks on the market. Stainless Steel Bolted Frac Sand Storage Tanks Specifications Coating color dark blue, dark green, white, and customized A standard steel plate size effective size 2400mm x 1200 m Steel plates thickness 3mm - 12mm, depends on the diameter & height Coating thickness 0.25mm - 0.4mm, two coatings internal and external Acid and alkalinity proof standard coating suits for PH3 - PH11, special coating suits for PH1 - PH14 Adhesion 3,450N/cm Elastic same as steel sheet, around 500KN/mm Hardness 6.0 Mohs Service life >30 years Spark test >1500 V Permeability gas and liquid impermeable Easy yo clean smooth, glossy, inert, anti-adhesion Corrosion resistance excellent! Suitable for wastewater salt water, seawater, high sulfur crude oil, salt fox, organic and inorganic compounds
Introduction of 50000 Gallon Glass Fused To Steel Biogas Storage Tanks With Double Membrane Roof The glass fused to steel tanks is the technical and economical core element of many biogas plants all over the world. Our glass fused to steel tanks are perfectly suited for biogas storage tanks operation. Our glass-lined steel biogas storage tank is extremely resistant to corrosion and abrasion. As a perfect alternative to the red mud plastic tanks or stainless steel tanks, we always offer the best-suited material for the job - to choose glass fused to steel plate to make the tank. The Glass fused to steel plate have below features and advantages : We always dedicated to offering the best quality glass-lined steel biogas storage tanks for our clients : To assure the quality, a very strict quality control system has been executed with: 200 staffs in our quality control department and the QC control system is in accordance with the requirement of ISO9001. Moreover, 4 kinds of quality tests have been carried out from the beginning of production to delivery of the GFS tanks. Glass fused to steel biogas storage tanks application GFS tank has been widely used municipal and industrial effluent, sewage, wastewater, water treatment,biogas digester as various aerobic and anaerobic reactors of UASB, EGSB, SBR, BAF, USR, CSTR,and equalization tank, sludge holding tank, etc.
Center Enamel has established itself in bolted steel commercial water tanks and industrial water tanks for more than 30 years and promises to supply quality bolted steel commercial water tanks and industrial water tanks. Our stainless steel bolted tanks and Glass-Fused-to-Steel are ideal for industrial liquid storage. Our bolted steel commercial water tanks and industrial water tanks are made of Glass-Fused-to-Steel. Glass-fused-to-steel is the premium technology in the tank market. The enamel glass coated to the tanks forms a hard, inert barrier for both the interior and exterior tank surfaces to guard against weather and corrosion. Glass-fused-to-steel is impermeable to liquids and gas, offers excellent impact and abrasion resistance. Moreover, the color won't fade even after a lot years. Center Enamel's glass fused to steel commercial water tanks and industrial water tanks engineering design meet or exceed AWWA D103-09 and EN/ISO28765:2011, and our glass fused to steel commercial water tanks and industrial water tanks engineers make tank engineering calculation on each specific tank structure according to project local environmental conditions, such as snow load, wind speed, seismic zone etc., to make sure the tank structure's adequate security in long-term service life. Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61, API and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 45 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
Center Enamel has established itself in bolted steel commercial water tanks and industrial water tanks for more than 30 years and promises to supply quality bolted steel commercial water tanks and industrial water tanks. Our stainless steel bolted tanks and Glass-Fused-to-Steel are ideal for industrial liquid storage. Our bolted steel commercial water tanks and industrial water tanks are made of Glass-Fused-to-Steel. Glass-fused-to-steel is the premium technology in the tank market. The enamel glass coated to the tanks forms a hard, inert barrier for both the interior and exterior tank surfaces to guard against weather and corrosion. Glass-fused-to-steel is impermeable to liquids and gas, offers excellent impact and abrasion resistance. Moreover, the color won't fade even after a lot years. Center Enamel's glass fused to steel commercial water tanks and industrial water tanks engineering design meet or exceed AWWA D103-09 and EN/ISO28765:2011, and our glass fused to steel commercial water tanks and industrial water tanks engineers make tank engineering calculation on each specific tank structure according to project local environmental conditions, such as snow load, wind speed, seismic zone etc., to make sure the tank structure's adequate security in long-term service life. Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61, API and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 45 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
Introduction of 50000 Gallon Glass Fused To Steel Biogas Storage Tanks With Double Membrane Roof The glass fused to steel tanks is the technical and economical core element of many biogas plants all over the world. Our glass fused to steel tanks are perfectly suited for biogas storage tanks operation. Our glass-lined steel biogas storage tank is extremely resistant to corrosion and abrasion. As a perfect alternative to the red mud plastic tanks or stainless steel tanks, we always offer the best-suited material for the job - to choose glass fused to steel plate to make the tank. The Glass fused to steel plate have below features and advantages : We always dedicated to offering the best quality glass-lined steel biogas storage tanks for our clients : To assure the quality, a very strict quality control system has been executed with: 200 staffs in our quality control department and the QC control system is in accordance with the requirement of ISO9001. Moreover, 4 kinds of quality tests have been carried out from the beginning of production to delivery of the GFS tanks. Glass fused to steel biogas storage tanks application GFS tank has been widely used municipal and industrial effluent, sewage, wastewater, water treatment,biogas digester as various aerobic and anaerobic reactors of UASB, EGSB, SBR, BAF, USR, CSTR,and equalization tank, sludge holding tank, etc.
Center Enamel supplies a wide range of dry bulk storage tanks to meet your grain storage needs, whether indoors or outdoors, with or without a hopper base. Our granaries are food grade. The capacity of dry bulk warehouses ranges from 50m3 to 20,000 m3. No matter the size, we can meet your needs. Your demand is our greatest motivation. Our dry bulk storage silo is designed to meet or exceed the American Waterworks Association (AWWA D103-09 and EN / ISO28765:2011, and our tank engineers make tank engineering calculations for each specific tank structure according to the project local Environmental conditions, such as snow loads, wind speeds, seismic belts, etc., to ensure a sufficiently safe long-term service life of the tank structure. Our dry bulk storage silos are field proven in FDA and other food applications. Our bolt steel dry bulk bins allow quick and easy installation on your site, regardless of weather conditions and no heavy crane equipment. About Center Enamel Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61, API and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 60 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
Center Enamel Co., Ltd is dedicated to providing quality bolted steel water storage tanks. Center Enamel Co., Ltd is not only the first bolted steel water storage tank manufacturer and supplier in China, but also the most experienced bolted steel water storage tank manufacturer in all of Asia. Center Enamel bolted steel water storage tank engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA, etc. international standards. We will strive to implement a long term and repeat relationship with our clientele, based on quality, safety, timely service and anticipation for their needs. Vitreous enamel technology advantages Center Enamel Co., Ltd has been engaged in enamel industry for more than 30 years, the most professional enamel enterprise, process more than 200 patents of enamel frit formulas Company own a professional R&D Dep. with more than 50 people,set up special laboratory, and possess independent enamel formula research ability. We will provide a professional approach to constructing exceptional quality projects which meet budget and schedule goals. With more than 30 years of development, Center Enamel bolted steel water storage tanks have been exported to more than 60 countries including the USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India, and South Africa, etc. The superior product quality and prompt service gain us worldwide recognition. Advantages of bolted steel water storage tanks Big volumes, storage capacity solutions ranging from 20CBM 8000CBM More cost-effective compared to concrete tanks: concrete tanks take a long time in construction and need bio professional installation equipment More corrosion resistant as compared to welded reservoirs Easy to transport , low freight cost: Standard green and color can be customized Installation by a trained crew of professionals. Short-term production and installation Beautiful appearance: color can be customized, it is harmonious with the surrounding landscape: concrete tanks are blank out-look appearance, can not change color according to surroundings High Performance and Hardwearing: the service life of glass fused to steel tank is more than 30 years Flexibility to Re-Model, Extend, Dismantle and Re-Site: Bolted tanks are easily transported in sizes that absolutely preclude moving other types of tanks. They can be quickly knocked down and erected at a new location without the extra costs of complete cleaning, cutting down, and rewelding.
Bolted Steel Leachate Storage Tanks Introduction Bolted Steel Leachate Storage Tanks are designed to store leachate, which is the water is being extracted from the site. Leachate is highly corrosive depending on the variability of the composition, and need tanks and containers with excellent corrosion resistance to store it. When the composition and toxicity of leachate vary from one landfill to another landfill, one can not be too careful when storing such a volatile substance. If not properly supervised or contained, leachate can seep through the water table and into the groundwater. There are only a few tanks that have abilities to store landfill leachate, which with the variability in composition. When a project comes with leachate storage tanks, the landfill operators first option is Center Enamels glass fused to steel leachate storage tanks. Center Enamel Co., Ltd is a manufacturer dedicated to enameled products since 1989. We have more than 30 years of experience in Glass-Fused-to-Steel leachate storage tanks design, manufacture, and installation. We are the largest and the most professional glass-fused - to -steel bolted tank supplier in China. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 60 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India, and South Africa, etc. The superior product quality and prompt service gain us worldwide recognition. Our company has the most advanced production line and already passed the ISO9001 - 2008 quality system certificate. Center Enamel Tanks are produced and designed confirming to AWWA D103 - 09, OSHA and can meet European standards. The center Enamel is a unique enterprise that can produce an AA grade enamel sheet now. The company owns a professional R&D department with more than 30 person laboratory, and possess independent enamel formula research ability. According to customers' different operating requirements, we can customize various products.
The acid and alkali resistance bolted steel industrial water tanks also called glass fused to steel tank, which combines the strength and flexibility of steel and the corrosion resistance of glass.Bolted steel industrial water tanks are assembled by Enamel sheet,Special sealant and Self-locking bolts. The enamel steel plate is coated with two layer of enamel on both sides, and then burned with 900 high temperature, makes the enamel and steel plate bond together strongly. The strong bonding enamel coating not only can prevent the corrosion of industrial water tank, but also resistance to strong acid and strong alkali. Center Enamel's industrial water tanks engineering design meet or exceed AWWA D103-09 and EN/ISO28765:2011,and our industrial water tanks engineers make tank engineering calculation on each specific tank structure according to project local environmental conditions, such as snow load, wind speed, seismic zone etc., to make sure the tank structure's adequate security in long-term service life. Bolted Steel Industrial Water Tanks Specification Coating Color Standard dark green and blue or customized Coating thickness 0.25-0.45mm Acid and alkalinity proof Standard PH: 3~11, Special PH:1~14 Adhesion 3.450N/cm Hardness 6.0 (Mohs) Service life â?¥30 Years Holiday test >1500V Permeability Gas liquid impermeable Easy to clean Smooth, glossy, inert, anti-adhesion Corrosion resistance Excellent, suitable for wastewater, salt water, sea water, high sulfur crude oil, salt fog organic and inorganic compounds About Center Enamel Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China, but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 60 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
The glass fused to steel wastewater treatment tanks distinguish with its good performance good corrosion resistance , with the corrosion-resistant silica glass coating on the steel panels .This is the only wastewater treatment tank finish where two materials are fused together to achieve the best of both : the strength and flexibility of the steel combined with the corrosion resistance of the glass . The high temperature fusion of glass to steel fired at 850 degree results in an inert, durable finish . Center Enamel's Glass-Fused-to-Steel wastewater treatment tank has been proved internationally with service life over 30 years. Glass Fused to Steel Wastewater Treatment Tanks Specification Coating Color Standard dark green and blue or customized Coating thickness 0.25-0.45mm Acid and alkalinity proof Standard PH: 3~11, Special PH:1~14 Adhesion 3.450N/cm Hardness 6.0 (Mohs) Service life â?¥30 Years Holiday test >1500V Permeability Gas liquid impermeable Easy to clean Smooth, glossy, inert, anti-adhesion Corrosion resistance Excellent, suitable for wastewater, salt water, sea water, high sulfur crude oil, salt fog organic and inorganic compounds Glass Fused to Steel Wastewater Treatment Tanks Advantages 1. Advanced technology and innovative edge protection ensure Center Enamel Glass-Fused-to-Steel Tanks are the exceptional solution in most harshest storage environment. 2. Center Enamel Glass-Fused-to-Steel tanks with superior corrosion resistance can be utilized in both the liquid and gaseous zone, and maximizing the service life of tank structure. 3. Customized colors make the tank harmonized with the surrounding environment. 4. Long service life glass coating requiring minimal maintenance, reducing the risk & loss of project shutdown during operation. 5. Modular bolted constructure give shorter installation period with simple installation tools. 6. Tank can be dismantled and rebuilt, gives continuous asset value to the product.
As the most popular solution for chemical wastewater Treatment, Glass Fused to Steel (GFS) Tanks are widely used as industrial water storage tank,potable water storage, fire-fighting water treatment ,irrigation water storage etc. With enamel coating technology, GFS tanks has excellent corrosion resistance, no need to do any anticorrosive treatment, and also of superior aid and alkali resistance. Advantage of GFS Industrial Water Storage Tanks 1. Short installation period : compare to more than 40days installation time for other type tanks, usually GLS tanks only needs even less than 15days. 2. Superior corrosion resistance : GLS tanks can resist pH rage 1-14. 3. Beautiful appearance : Standard color is dark green, and color can be customized according to customers request. 4. Climate adaptability : GLS tanks can be used in almost all kinds of weather conditions, that is very important for some special areas. 5. Long service life : more than 30 years service life. 6. Easy construction : No requirement for big installation equipment, and can be easily expand, dismantle and move. About Center Enamel Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China, but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 60 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
Brief introduction of Glass Fused to Steel Waste Water Storage Tanks Glass Fused to Steel Waste Water Storage Tank has enjoyed increasing popularity over the past years . Glass Fused to Steel Waste Water Storage Tank is widely used in the water and wastewater treatment industry with excellent corrosion resistance for both internal and external coated with corrosion-resistant silica glass. In the wastewater treatment sector , Glass Fused to Steel Waste Water Storage Tanks can be used as aeration tanks, aerobic reactor, water purifying tanks, leachate storage, trickling filters. The tanks are constructed in full accordance with the applicable AWWA D103 Six good reasons to choose Glass Fused to Steel Waste Water Storage Tanks - Minimal maintenance costs - Colors can be customized and will not fade away with time - Tanks are bolted, it is easy to ship and dismantle - Size is expandable - Simple installation, do not need big equipment for erection, cost-effective - Over 30 years service life Our advantages . The largest and most professional manufactory in China . Tanks are up to NSF- 61 and AWWA D-103 standards . More than twenty years' experience . Already successfully built more than 2000 tanks worldwide . Excellent after -service and professional team . Time-saving and cost-effective Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 60 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
Water storage tanks can be installed in any number of commercial or industrial application processes. We design our water storage tanks based on your needs, with the latest technological resources and using the best quality materials pursuant to international standards. Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China, but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61, API and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 45 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition. Glass-Fused-to-Steel tank Applications
As the first biogas storage tanks manufacturer in China, Center Enamel has more than 30 years experiences in biogas tanks design, manufacture and installation. All the biogas tanks are made of high corrosion resistance Glass-Fused-to-Steel, actually, we also call it Glass-Fused-to-Steel tank. We can also customize these biogas tanks in a variety of colors to meet local planning recommendations and restrictions. As we all know, almost any organic waste can be digested, including food processing waste, domestic waste, restaurant waste, municipal sludge effluent and farm waste. Anaerobic digestion systems can convert organic waste to clean, renewable energy. In every biogas project, we can use Glass-Fused-to-Steel tank to biogas storage tank and anaerobic digestion tank. With the high corrosion resistance, these biogas storage tanks and anaerobic digestion tanks will have long term security, reducing operation and maintenance costs. Modular bolted construction gives rapid and cost-effective site installation and the ability to remodel or relocate the structure gives asset value to the biogas storage tank and anaerobic digestion tank. Our biogas tanks are assembled quickly without specialized labor or heavy equipment. This fact alone often makes our Glass-Fused-to-Steel tank the most economical tank choice. Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system is in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61, API, and NFPA, etc. international standards.
As the first bolted steel tanks manufacturer in China, Center Enamel has designed, manufactured and installed bolted steel potable water tanks for more than 30 years. we can supply you with a new bolted steel tank suitable for corrosive and non-corrosive liquids and chemicals, ranging in capacity from 500 Gallons to 4,000,000 Gallons. All our bolted steel potable water tanks are ready for sale. When constructing bolted steel potable water tanks, the selection of the best material is an important quality factor. Bolted Glass Fused to Steel potable water tank is the only tank finish where two materials are fused together to achieve the best of both: the strength and flexibility of the steel combined with corrosion resistance of the glass, which are ideal if you need to store municipal/industrial waste water and sludge or certain processing, intermediate and end products from the chemical, pharmaceutical and food processing industries. Bolted tanks are made from individual sections that are manufactured and finished offsite, greatly reducing the time and labor involved in the field. Once delivered, each section is erected, sealed with gaskets and bolted to adjacent sections. This results in an installation process that is quick and easy, far faster than installation of concrete or welded tanks.The installation time for bolted tanks depends on the sizes of the tanks installed, and the complexity of the installation process. Normally, the installation is very quick, often requiring less than a third of the time it typically takes to complete a welded or a concrete tank. Center Enamel is the leader in bolted steel potable water tank in China, Glass Fused to Steel tanks and Bolted steel tanks. We offer the most complete array of tanks for storing potable water for Commercial, Industrial, and Residential applications. Whether you're looking to potable water storage tank , our bolted steel tank is the perfect choice for your potable water storage project. Center Enamel can make even the most complicated tank projects go smoothly. Send your requirement, our bolted steel potable water tank engineers make tank engineering calculation on each specific tank structure according to project local environmental conditions, such as snow load, wind speed, seismic zone etc., to make sure the tank structure's adequate security in long-term service life. When it comes to potable water Storage, make it Center Enamel. rted. More info in http://www.cectank.com/potable-water-tanks/
Wastewater storage tanks is a kind of common wastewater treatment equipment in the field of wastewater treatment. There are many kinds of complicated corrosion forms in wastewater, such as acid-base corrosion, atmospheric corrosion, abrasion, penetration type expansion crack and microbial corrosion of bacteria and algae, which seriously affect the service life of the wastewater treatment tank. Therefore, the wastewater treatment needs to use an excellent performance Glass-Fused-To-Steel tank to meet or exceed environmental standards. Center Enamel provides a reliable, durable and high-quality wastewater storage solution. Center Enamel Glass-Fused-To-Steel tank is the best option for wastewater storage. Center Enamel's Glass-Fused-to-Steel Tanks engineering design meet or exceed AWWA D103-09 and EN/ISO28765:2011, and our GFS tank engineers make the tank engineering calculation on each specific tank structure according to project local environmental conditions, such as snow load, wind speed, seismic zone etc., Center Enamel storage solution to agricultural industry offers the following benefits: 1. Advanced technology and innovative edge protection ensure Center Enamel Glass-Fused-to-Steel Tanks are an exceptional solution in the harshest storage environment. 2. Center Enamel Glass-Fused-to-Steel tanks with superior corrosion resistance can be utilized in both the liquid and gaseous zone, and maximizing the service life of tank structure. 3. Customized colors make the tank harmonized with the surrounding environment. 4. Long service life glass coating requiring minimal maintenance, reducing the risk & loss of project shut down during operation. 5. Modular bolted constructure give shorter installation period with simple installation tools. 6. The tank can be dismantled and rebuilt, gives continuous asset value to the product.
To feed the growing world population, increasing agriculture production is required. under such circumstance, premium containment solution is required for crops & forage storage, manure, sludge, irrigation during agriculture production. Agriculture waste such as livestock and poultry manure and energy crops are an important part of the global growth of green renewable energy solutions. Center Enamel Glass-Fused-to-Steel Tanks are made of special steel plate, special sealant, self-locking bolt, and the service life for more than 30 years. After pretreatment, the special steel plate is coated with two or three layers of enamel coating on both sides. After the heat polymerization, a strong binding force is formed between the coating and the steel plate. The protective layer formed by the coating can not only prevent corrosion of the tank body, but also has the function of strong acid and alkali resistance and strong abrasion resistance. Center Enamel Glass-Fused-To-Steel Water Tanks for irrigation in agriculture. In order to ensure the normal growth of crops and obtain high and stable yield, it is necessary to supply crops with sufficient water. Under natural conditions, crop water requirements are often not met due to insufficient precipitation or uneven distribution. Therefore, artificial irrigation is necessary to make up for the lack of natural rainfall. Also, we can use Glass-Fused-To-Steel Tanks to Collect and store rainwater that falls onto buildings and using it for agricultural purposes, which can cut the bill of irrigation water. That is why we choose Glass-Fused-To-Steel Tanks as for irrigation in agriculture, also can be widely used in vegetables, flowers, orchards, medicinal plants planting places.
Glass-Fused-to-Steel Tanks are made of special steel plate, special sealant, self-locking bolt, and the service life are more than 30 years. After pretreatment, the special steel plate is coated with two or three layers of enamel coating on both sides. After the heat polymerization, a strong binding force is formed between the coating and the steel plate. The protective layer formed by the coating can not only prevent corrosion of the tank body, but also has the function of strong acid and alkali resistance and strong abrasion resistance. We use the titanium alloy special steel plate as an enamel steel plate, which is twice as strong as ordinary steel plate, the commonly used steel plate thickness from 3mm to 12mm. The inner and outer sides of the steel plate are sprayed with ground glaze and surface glaze. after heat treatment at 850-940â??, the steel plate surface will form a 0.3mm thick enamel coating, which will not only prevent the corrosion of the steel plate, but also has the function of a strong acid, strong alkali resistance. And the self-locking bolt installation is very easy to install, no need for big installation equipment and/or very skilled labors. Center Enamel Glass-Fused-to-Steel tanks are an excellent option for wastewater treatment. They are widely used as drinking water tanks, industrial wastewater storage tank, anaerobic digester, leachate storage tank, agricultural water Storage tank, fire water tank, dry bulk storage tank, municipal sewage. And till now Center Enamel Glass-Fused-to-Steel tanks are already exported to more than 45 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc., and products enjoy worldwide recognition due to superior quality and prompt service.
