Features: 1. The crushing cavit is deep and without dead zone, which can increase the feeding capacity and capacity; 2. It has a big crushing ratio and even grain shape. 3. The gasket type inlet size makes flexible adjustment posible, and it¡¯s reliable, conveinent, and with a big adjustment range, which can greatly enhance the flexibility of the equipments. 4. The lubrication system is safe and reliable, and it¡¯s quite convinient to change components and there will be less maintenance needed. 5. It has a simple structure, and is quite stable and low in operation cost. 6. The equipment is energy saving: 15%-30% energy can be saved for each single plate, more than twice energy will be saved for the whole system; 7. The size of outlect is quite adjustable, which can meet requirements of different customers. 8. Low noise, less dust; 9. Simple structure, convinient to repair; stable performance, low operation cost; big crushing ratio. Technical parameter of jaw crusher : Mm to inch conversion: 25.4millimeters=1 inch Model max. Feeding Size (mm) discharge Size (mm) capacity (t/h) motor Power (kw) overall Dimensions (mm) weight (t) Pe400¡Á600 350 40-100 15-60 30 1700¡Á1732¡Á1653 6.5 Pe500¡Á750 425 50-100 50-100 55 2035¡Á1921¡Á2000 10.3 Pe600¡Á900 480 65-160 60-130 75 2290¡Á2206¡Á2370 16.5 Pe750¡Á1060 630 80-140 80-180 110 2620¡Á2302¡Á3110 29 Pe900¡Á1200 750 95-165 140-260 110 3789¡Á2826¡Á3025 54.5 Pe1000¡Á1200 850 195-265 315-550 110 3335¡Á3182¡Á3025 57 Pe1200¡Á1500 1020 150-300 400-800 160-220 4200¡Á3750¡Á3820 100.9
Application of jaw crusher: Jaw crusher is a trusted and reliable brand for its high quality and good manufacturing. It specializes in producing jaw crusher which is widely applied to crush high hardness, mid hardness and soft rocks and ores such as slag, construction materials, marble, etc. The pressure resistance strength is under 200mpa, that is, suitable for primary crush. Each model has a large feed opening for its size and an ideal nip angle, giving smooth material flow, high reduction efficiency and high capacity. Their simple design conceals many advanced features that give easy operation, simple maintenance, long life and a low cost per ton. The structure of jaw crusher: The structure of jaw crusher includes main frame, main axle, roller bearings, eccentric shaft, jaw plates, side plates, toggle mechanism, fly wheels and springs. The features of jaw crusher: 1. Jaw crusher is of various types; 2. Jaw crusher is suitable for crushing maximum, medium and minimum stones; 3. The operating principle of jaw crusher is easy to be operated; 4. The structure of jaw crusher is simple and it is easy to maintain; Operating principle: Jaw crusher uses motor as its power. Through the motors wheels, the eccentric shaft is driven by the triangle belt and slot wheel to make the movable jaw plate move by a regulated track. Therefore, the materials in the crushing cavity composed of fixed jaw plate, movable jaw plate and side-lee board can be crushed and discharged through the discharging opening.
Jaw Crusher is mainly used to crush kinds of mining stones primarily and the largest compression resistance of the material to be crushed is 320Mpa. The jaw crusher is widely used in mining, metall-urgical industry, building material, highway, railway and chemical industry. Working Principle: The motor transmits power through belt, drives the moving jaw do periodic motion to the fixed jaw surround the eccentric shaft. The angle between toggle plate and moving jaw increases when moving jaw moves up. So the moving jaw closes to the fixed jaw. The stuff will be crushed in this process. The angle of Jaw Crusher between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw of Jaw Crusher moves away from fixed jaw by the pulling of rod and spring, the products after crushing will be discharged from the outlet of Jaw Crusher. Characteristics: High ratio of crushing, homogeneous final grain size, simple structure, reliable working condition, easy maintenance, low operating cost. Type Inlet size (mm) Max Feeding Size (mm) Discharge Size(mm) Power (KW) Capacity (T/H) PE150x250 150x250 125 10-40 5.5-7.5 1-5 PE200x350 200x350 125 15-40 7.5-11 5-16 PE250x400 250x400 210 20-60 15-18.5 5-20.
The jaw crusher is drived by motor through belt and belt wheels, which makes the movable jaw plate up and down through eccentric shaft.When the movable jaw comes down, the angle between the fixed jaw plate and the movable jaw plate gets smaller, then the materials can be crushed .When the movable jaw plate rises, the angle becomes lauger and the movable jaw plate leaves the fixed jaw plate with the function of tie bar and spring.At the same time the final products are discharged from the lower outlet of the crushing chamber. Specification This series of products have the advantages of big reduction ratio, even granularity, simple structure, liable operation, easy maintenance, economic operation cost, etc. It is widely used for materials with the max crushing compressive strength not more than 320 mpa in the field of mine, metallurgy, building materials, roads, railways, irrigation, chemical industry, etc.
The jaw crusher is one of our product groups capable to crush easily even the hardest material and the hydraulic system enables the easily and rapidly adjustment of the jaw capacity in accordance withy the product volume, if you wish to lift a material from the machine.
Jaw crushers series made by henan zhengyi construction machinery co.;ltd has the top quality with competitive price. This series of jaw crusher is mainly used to break materials whose compression strength is less than 320mpa in secondary and coarse crushing. It has the features as follows: high crushing rate, high throughput, even discharged material size, simple structure, reliable performance, easy maintenance, low cost. It has been widely used in mining, metallurgy, building materials, highway, railway and irrigation works. Performance features of jaw crusher: This series of jaw crusher has the fatures of simple struture, reliable performance, easy maintenance. It is mainly used in ore dressing, building materials, road construction, silicate and chemical industry. The maximum compression strength this machine can sustain is 320mpa. Our crusher is mainly used to break all kinds of ore and big block materials in secondary crushing. It is widely used in mining, metallurgy, building materials, highway, railway, irrigation works and chemical industry. The maximum compression strength for the machine is 320mpa. Usage and scope of jaw crusher íí 1. This series of crusher is mainly used in metallurgy, mining, chemical, cement, construction, refractories and ceramics to crush ore and rock with a medium hardness in secondary and fine crushing.íííííííííííí 2. This series of crusher is suitable to crush soft minerals with a compression strength less than 300mpa, the maximum size of the materials should not be bigger than that in the technical data form.
Shibo jaw crushers are ideal for primary and secondary crushing. With the increase of production, our jaw crusher can greatly reduce the operating costs. And it is of reliability and flexibility. The large feed opening and force-feeding action from the inward and downward eccentric movement of the swing jaw mean that our jaw crusher can increase the capacity. The jaw has a smaller discharge setting, allowing for a higher degree of flexibility with relative equipment. Positive setting adjustment is easy. The jaw crusher has features of simplicity, easy access and low maintenance. Working principle of jaw crusher: The motor transmits power through belt, drives the moving jaw to do periodic motion towards the fixed jaw by the eccentric shaft. The angle between toggle plate and moving jaw plate increases when moving jaw moves . So the moving jaw moves towards the fixed jaw. The stuff will be crushed in this process. The angle between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw moves leaves fixed jaw by pulling rod and spring, the final crushed stuff will be discharged from the outlet. Characteristics of jaw crusher: -high ratio of crushing, -even final size, -simple structure, -reliable working condition, -easy maintenance, -low operating cost.
MODEL Max. Feed Size (mm) Discharge Size (mm) Capacity (t/h) Motor power (KW) PE-600X900 520mm 65-130 50-150 75
Jaw crusher of our our company has the features of large crushing ratio, uniform product granularity, simple construction, reliable operation, easy maintenance, low operating cost. Jaw crusher is widely used in mining, smelting, building materials, roads, railways, water conservancy, chemical industry and many other departments, and the largest compression resistance of the material is 320MPa .
PE/PEX Series Jaw Crusher has the features of high crushing and even product size ratio. It can be used to crush material, whose compression strength is not more than 320Mpa. PE Series is used in primary crushing, while PEX series is used in secondary crushing and fine crushing. Features and Benefits: Simple structure and reliable operation easy maintenance and low operating cost.
This series of jaw crusher can reach the crushing ratio of 4-6 and the shape of final product is even. They are widely applied to crush high hardness, mid hardness and soft rocks and ores such as slag, construction materials, marble, etc. The pressure resistance strength is under 200Mpa, that is, suitable for primary crush. Jaw crusher can be used in mining, metallurgical industry, construction, road and railway building, conversancy, chemistry, etc. Features: 1. Simple structure, easy maintenance; 2. Stable performance; 3. Even final particles and high crushing ratio. Jaw Crusher Operating principle: This jaw crusher uses motor as its power. Through the motor's wheels, the eccentric shaft is driven by the triangle belt and slot wheel to make the movable jaw plate move by a regulated track. Therefore, the materials in the crushing cavity composed of fixed jaw plate, movable jaw plate and side-lee board can be crushed and discharged through the discharging opening. the price of product..fee is not right, the fee according the contract/could negotiable. Standards.
PE500-750 jaw crusher Technical Data: Model PE500-750 Size of Feeder Opening (mm) 500 x 750 Max. Feeding Size (mm) 425 Capacity (t/h) 50-100 Motor Power (KW) 55 Overall Dimensions (mm) 2035 x1921x 2000 Weight (t) 10.3 In bulk
It features in: 1 firm structure, stable performance, large capacity, even producing granularity 2 with the increase of production, our jaw crusher can greatly reduce the operating costs. 3 convenient maintenance and economical running expense. 4 the large feed opening and force-feeding action from the inward and downward eccentric movement of the swing jaw mean that our jaw crusher can increase the capacity. The jaw has a smaller discharge setting, allowing for a higher degree of flexibility with relative equipment. Positive setting adjustment is convenient. Standard
Model Max. feeding granularity(mm) Adjusting range of discharge opening(mm) Capacity (m3/h) Power of motor(kW) Weight (excluding electric motor) (t) PE1600x2100 1250 175-300 870-1500 355 169 PE-1500x1800 1200 220-350 281-625 280 122 PE-1200x1500 1000 150-300 250-500 220 82.3 PE-1100x800 650 50-125 38-156 132 19.86 PE-1000x1200 850 195-265 197-214 110 50.6 PE-900x1200 750 95-165 87-164 110 50 PE-900x1060 685 230-290 100-250 110 31 PE-870x1060 660 200-260 181-210 110 30.5 PE-800x1060 640 100-200 85-143 110 30 PE-750x1060 630 80-140 72-130 110 29.3 PE-720x900 520 195-245 66-83 55-75 14.8 PE-670x900 520 195-245 66-83 55-75 14.8 PE-620x900 500 95-145 31-70 55 14.3 PE-600x900 500 65-160 30-75 55 15.5 PE-600x750 500 150-200 50-100 55 12 PE-550x900 450 50-120 47-75 55 7.8 PE-500x750 425 50-100 28.5-62.5 55 10.3 PE-475x1050 400 90-140 37.5-81 55 11.7 PE-430x600 400 90-140 35-60 37 6.5 PE-400x600 340 40-100 10-40 30 6.5 PE-250x500 210 20-80 5.7-31 18.5 3.37 PE-250x400 210 20-80 3-13.1 15 2.8 PE-150x250 125 10-40 0.6-3 5.5 0.81 PE-60x100 45 3-10 0.2-0.6 1.1 0.116 íí PJ-900x1200 750 100-180 94-170 110 55.4 PEV-750x1060 630 80-140 72-140 110 24.2 PEV-600x900 500 70-130 53-106 75 13 PEV-500x900 425 50-100 31.25-68.75 55 10 PEV-430x650 360 40-100 25-75 37 5.1 íí PEX-300x1300 250 20-90 10-65 75 11.6 PEX-250x1200 210 25-60 13-38 37 7.7 PEX-250x1000 210 25-60 10-32 30 6.5 PEX-250x750 210 25-60 8-22 22 5.1 PEX-200x1000 160 20-55 6.9-23.8 22 6.5 PEX-150x750 120 18-48 5-16 15 3.5 PEX-100x600 80 7-21 2-8 7.5 0.9
Jaw crusher Nude package
Jaw crusher
Jaw crusher
Application Break-day specializes in producing jaw crusher which is widely used in mining, quarry, material handling. Our company has been a manufacturer and exporter of crushers for decades. We have various models of jaw crusher. The structure of jaw crusher includes mainframe, main axle, roller bearings, eccentric shaft, jaw plates, side plates, toggle mechanism, fly wheels and springs. The jaw crusher is ideally suitable for primary and secondary crushing with low power consumption and easy maintenance. Every feature of this machine has been carefully designed to provide superior quality and performance. It is widely used for crushing various materials like stone, granite, trap rock, coke, coal, manganese ore, iron ore, emery, fused aluminum, oxide, fused calcium carbide, lime stone, quartzite, alloys, etc. It is recommended by leading consultants in this field and is used by hundreds of customers all over the world. Features: It is of various types. It is suitable for crushing maximum, medium and minimum stones. The operating principle is easy to be operated. Its structure is simple and it is easy to maintain.
Jaw crusher Feed opening: 150 x 250 mm Max. Feed size: 125 mm Capacity: 0.6-3 t/h Power consumption: 5.5kw Discharge opening: 10-40 mm Overall dimension (l x w x h): 758íß528íß140mm Weight: 0.81 t
Jaw crusher Feed opening: 150 x 250 mm Max. Feed size: 125 mm Capacity: 0.6-3 t/h Power consumption: 5.5kw Discharge opening: 10-40 mm Overall dimension (l x w x h): 758528140mm Weight: 0.81 t
