Item: 0.1mm-0.7mm Brassed Coated Sawing Steel Wire for Solar Wafer Cutting Shape:wire Material: Imported C-steel Coating:Brass,combinations Number of wires:1 Diameter:65um-350um available Very thin and tensile wires of low keff loss Hence more wafters per cut and less fractures Make higher productivity Tight diameter and ovality tolerances A wide range of spool types An advanced winding technology
Hengxing 0.1mm 0.12mm Brass Coated Solar Wafer Cutting Wire Sawing wire , also called ultra fine wire,is cold drawing high strengh brass plated steel wire with high carbon. It can be used for cutting high hardness of single crystal line silicon,poly crystal line silicon,quartz material,etc. (1)Sawing wire is a high grade steel wire that can be used to cut a wide range of products.It serves as the abrasive carrier in a Multi Wire Saw. (2)The technique finds its origin in the world of solar cells. From the mid eighties, this technology was developed to decrease kerf loss and increase productivity. (3)In the early nineties the method was introduced for slicing silicon ingots to wafers for the electronics industry. Since then the technique has been more and more introduced for cutting other hard and brittle materials as well. (4)Saw wire is used to cut a wide variety of products, such as silicon, germanium, gallium aresenide, quartz, indium phosphide, to name only a few. ( 5 )Saw wire is mostly used in the production of solar cells. The use of photovoltaic energy is increasing, as humanity becomes more and more aware of the scarcity of the natural resources. Advantage of Hengxing 0.1mm 0.12mm Brass Coated Solar Wafer Cutting Wire -------- Very thin and tensile wires of low keff loss Hence more wafters per cut and less fractures Make higher productivity Tight diameter and ovality tolerances A wide range of spool types An advanced winding technology Hengxing 0.1mm 0.12mm Brass Coated Solar Wafer Cutting Wire 17 years of history in steel wire transforming and coating Listed on Shenzhen A stock market in 2007 An annual output of 10,000 tons of sawing wire ISO/TS 16949 And ISO9002 certificated
Hengxing 0.1mm 0.12mm Brass Coated Solar Wafer Cutting Wire Item: 0.1mm-0.7mm Brassed Coated Sawing Steel Wire for Solar Wafer Cutting Shape:wire Material: Imported C-steel Coating:Brass,combinations Number of wires:1 Diameter:65um-350um available Advantage of Hengxing 0.1mm 0.12mm Brass Coated Solar Wafer Cutting Wire -------- Very thin and tensile wires of low keff loss Hence more wafters per cut and less fractures Make higher productivity Tight diameter and ovality tolerances A wide range of spool types An advanced winding technology
Mechanic high hardness screen separate wire special steel cutting line for iPhone Samsung mobile phone screen repair, Mechanic carbon steel molybdenum wire, the gold alloy cutting line for separating cell phone LCD touch screen front glass, Special carbon steel screen separating wire for mobile phone repair accessories. Mechanic High Hardness Cutting Wire Carbon Steel Molybdenum Wire Gold Alloy Cutting Line For Separating Mobile Phone LCD Touch Screen. Features : Not easy to break; High tensile strength; High cutting accuracy; High surface finish; No damage to polarized light; Large crimp rate, consistent wire diameter, not easy to break, long life Adding carbon steel alloy composition, the material is harder, the tensile force is stronger; Product Specification : Product name: High hardness special steel wire Item name: Cutting Wire Brand: Mechanic Weight: 0.1kg Length: 200m Size: 51mm Wire diameter: 0.03/0.04/0.05/0.06/0.08/0.1 mm Application: Used for various LCD glass screen separation Package includes : 1pcs x High Hardness Cutting Wire
Carbon Steel & Stainless Steel Cut Wire shot are widely used for shot peening to give compressive residual stress in the surface layer of components for fatigue life enhancement and suppression of stress corrosion cracking as well as cleaning and polishing of the surface of metal parts, deburring of die cast parts, is of reusable and recyclable, the working life is 1000 times of glass bead, can produce very bright surface, but creat much less dust than glass beads, natural and artificial corundum abrasives. The hardness is 20-40HRC. Chemical Composition (% by weight) C Cr Ni Si Mn S P max max max Stainless steel cut wire shot (SUS202) 0.15 max 17.0-19.0 4.0-6.0 1.0 7.5-10.0 0.03 0.06 stainless steel cut wire shot (SUS304) 0.07max 17.0-19.0 8.0-10.0 1.0 2.0 max 0.035 Stainless steel cut wire shot (SUS316) 0.08 max 16.0-18.5 10.0-14.0 1.0 2.0 max 0.035 Stainless steel cut wire shot (SUS430) 0.12 max 16.0-18.0 0 0.75 1.25 max 0.035 Carbon steel cut wire shot 0.45-0.75 - - 0.1-0.3 0.3-1.2 0.05 0.05 Available Sizes Material stainless steel cut wire shot Conditioned stainless steel cut wire shot (SUS304) carbon steel cut wire shot (SUS430) (SUS304) Size(mm) 300-450 HV 400-500 HV 500 HV HRC45-50 0.30 v v v - 0.35 v v v 0.40 v v v - 0.50 v v v - 0.60 v v v - 0.70 v v v - 0.80 v v v v 0.90 v v v v 1.00 v v v v 1.20 v v v v 1.40 v v v 1.5 v v v v 2.0 v v v v 2.5 v v v v
2kgs coils,10kgs coils,20kgs coils,50kgs coils,100kgs coils
Wire Cut EDM machines which are widely used in the fields of moulds, automobile parts, aeronautics and astronautics, electronic instrument, military, light industry, and household appliance. Specification Wire Cut EDM, also known as (wire electrical discharge machining or wire EDM) is a high-precision method for cutting nearly any electrically conductive material. A thin, electrically-charged EDM wire held between upper and lower mechanical guides forms one electrode, while the material being cut forms the second electrode. Electrical discharge between the wire and the workpiece creates sparks that rapidly cut away materials. Application of Wire Cut EDM: The wire cut EDM is suit to cut the metal stamping mould, plastin mould, super abrasive materials, precious metals and cutting sheets, gear cutter hob, mechanical parts processing ,etc EDM machines which are widely used in the fields of moulds, automobile parts, aeronautics and astronautics, electronic instrument, military, light industry, and household appliance Advantages of Wire Cut EDM: * The process is burr-free, distortion-free and can be used to machine exotic materials which are work-hardened, ductile or brittle. * High Precision. It is capable of making cuts that match your designs within �± 0.0001â??. * Less set up time. EDM manufacturing reduces the need for tooling, which in turn lessens the amount of time that it takes to set up. * Tapers. EDM machining is useful for cutting long tapers that other machining methods cannot produce. * Accurate internal cuts. Square-edged internal cuts are difficult to produce with other machining methods, but Wire EDM makes it possible. * Fine hole drilling. EDM drilling is capable of producing tiny holes that are difficult to produce with other methods.
Wire Cut EDM machines which are widely used in the fields of moulds, automobile parts, aeronautics and astronautics, electronic instrument, military, light industry, and household appliance. Specification Wire Cut EDM, also known as (wire electrical discharge machining or wire EDM) is a high-precision method for cutting nearly any electrically conductive material. A thin, electrically-charged EDM wire held between upper and lower mechanical guides forms one electrode, while the material being cut forms the second electrode. Electrical discharge between the wire and the workpiece creates sparks that rapidly cut away materials. Application of Wire Cut EDM: The wire cut EDM is suit to cut the metal stamping mould, plastin mould, super abrasive materials, precious metals and cutting sheets, gear cutter hob, mechanical parts processing ,etc EDM machines which are widely used in the fields of moulds, automobile parts, aeronautics and astronautics, electronic instrument, military, light industry, and household appliance Advantages of Wire Cut EDM: * The process is burr-free, distortion-free and can be used to machine exotic materials which are work-hardened, ductile or brittle. * High Precision. It is capable of making cuts that match your designs within �± 0.0001â??. * Less set up time. EDM manufacturing reduces the need for tooling, which in turn lessens the amount of time that it takes to set up. * Tapers. EDM machining is useful for cutting long tapers that other machining methods cannot produce. * Accurate internal cuts. Square-edged internal cuts are difficult to produce with other machining methods, but Wire EDM makes it possible. * Fine hole drilling. EDM drilling is capable of producing tiny holes that are difficult to produce with other methods.
Wire cut and straighten machine Model cn-xs-1220a Panel length: 3000mm Panel width: 1220mm Mesh wire diameter: 1.8-2.8mm Wire material: low carbon steel wire, galvanized, no processed but wire surface is clear. Polystyrene thickness: 50mm-100mm Total panel thickness: max.130mm Truss wire: 2-3mm Capability: 5 mins per 1 pc 3d panel. (3000mmx1220mm), about 430 sqm/8hrs Mesh size: 50x50, 52x52mm Configuration: 3m2/min 0.6mpa Power: 380v 50hz 75kw Power consumption: 1.9-3.5kw per hour Dimension: 13.5x1.8x1.7m Worker need: 4 workers Weight: 4000kg
Steel cut wire shot Size: 1.0mm, 1.5mm Chemistry composition: C: 0.45-0.75% Mn: 0.40-1.20% Si: 0.10-0.30% S: 0.04%max P: 0.04%max Average degree of hardness: 1.0mm: 51-53hrc (525-561hv) 1.5mm: 41-45hrc (388-436hv) Degree of hardness deviation the anti-pulls strength: 1.0mm: 1750-2150mpa 1.5mm: 1250-1450mpa Minimum density: 7.8g/cm3 25kgs/bag, 40kgs/ton/pallet
1. Production specification: cw1.0, cw1.5, cw2.0 2. Chemical Composition of the products: C 0.45-0.75%, Mn 0.40-1.20%, Si 0.10-0.30%, S¡Ü0.04%, P ¡Ü0.04% 3. Hardness: cw1.0: 51-53HRC cw1.5: 41-45HRC cw2.0: 51-53HRC Density: 7.8g/cucm 4. Steel cut wire shot is used for industrial foundry, forging plant, heat treatment shop, steel construction plant, container manufacturer, ship builder, auto and locomotive manufacturer and stone mill. 5. Microstructure: Tempered Marten site High strength, durable Ervin life: Steel cut wire shot: 3000 cycles. 25kg/bag, 1 ton/big bag, 2 tons/pallet.
Strictly according to American motorcar engineer association "J441 SAE standards," the People's Republic of China machinery industry "JB/T 8354-1996 steel wire cut shots standard" material requirements to production, but since using recycled steel wire its length and standard a slightly different. Steel cut wire shot plastic woven sack packaging, packaging bags which steel grit, steel cut wire shot wood pallet packaging, paper bag steel cut wire shot t packaging, bucket type steel bolus packaging.
Blast cleaning of steel cut wire:used for blast cleaning of casting, die-casting, forging, sand removal of casting, steel plate, h type steel, steel structure. 25kgs/bag, 40 bags/pallect.
Stainless steel cut wire shot is widely used in shot blasting machine, shot blasting equipment, shot peening machine, shot peening equipment, grit peening machine, steel plate preparation production line, steel structure preparation line. Stainless steel cut wire shot cleaning:shot blasting cleaning, shot peening cleaning, coloured aluminum alloy, copper alloy, zinc alloy die-casting parts, stainless steel casting parts cleaning, stainless steel forging parts cleaning, shot peening of forged parts, stainless steel plate cleaning, stainless steel cleaning, coloured parts, etc. Deburring and lighting of surface, can enhance the anti-fatigue performance, anticorrosion, concealing surface defects of work pieces to enable it to be bright and white. 25kga/bag, 40bags/pallect.
Product Standards: Our products have met international standard of SAE and have established the quality controlling system of ISO9000. Application:Aluminum shot is used for removing oxidation skin, burr, eliminating surface defect, removing stress, and etching, unknot, strengthen, prevention rust before painting of metal die-casting, precision casting, hardware tool, machinery manufacturing, automobile spare parts, apparatus, and pump valve industry. Specificationú¦ 0.6~2.5mm Chemical Composition Al >= 99% Microhardness 45 to 50HV Tensile Intensity 80-240Mpa Durability:6500times Microstructure: Deformed Density: 2.7g/ cm3 Bulk Density:1.5g/ cm3 Packing Types: Braided bag packing: 25kg/bag,40 bags/pallet, flexible container packing:1000kg/bag, stock packing, paper bag packing:25kg/bag,40bags/pallet,with paper bag barrel packing:900kg/barrel.
Product Standards: Our products have met international standard of SAE and have established the quality controlling system of ISO9000. Application: Copper shot is used for removing oxidation skin, burr, eliminating surface defect, removing stress, and etching, unknot, strengthen, prevention rust before painting of metal die-casting, precision casting, hardware tool, machinery manufacturing, automobile spare parts, apparatus, and pump valve industry. Specification: 0.6~2.5mm Chemical Composition Cu:58-99% other is Zn Microhardness 110 to 300HV Tensile Intensity :200-500Mpa Durability:5000times Density: 8.9g/ cm3 Bulk Density:5.1g/ cm3 Packing Types: Braided bag packing: 25kg/bag,40 bags/pallet, flexible container packing:1000kg/bag, stock packing, paper bag packing:25kg/bag,40bags/pallet,with paper bag barrel packing:900kg/barrel.
Product Standards: Our products have met international standard of SAE and have established the quality controlling system of ISO9000. Application: Zinc shot is used for removing oxidation skin, burr, eliminating surface defect, removing stress, and etching, unknot, strengthen, prevention rust before painting of metal die-casting, precision casting, hardware tool, machinery manufacturing, automobile spare parts, apparatus, and pump valve industry. Specificationú¦ 0.6~2.5mm Chemical Composition Zn more than 99% Microhardness 45 to 50HV Tensile Intensity :90-120Mpa Durability:6000times Density: 7.1g/ cm3 Bulk Density:4.1g/ cm3 Packing Types: Braided bag packing: 25kg/bag,40 bags/pallet, flexible container packing:1000kg/bag, stock packing, paper bag packing:25kg/bag,40bags/pallet,with paper bag barrel packing:900kg/barrel.
Ams2431/8 Ams2431/4 Sae j441 Vdfi8001 25kg/bag , 1000kg per bag or required
Cut wire shots use is in cleaning and pining the job. Shots size is equal to the diameter of the wire. Size are avalable in 0.3mm to 2.5mm in sapring steel, aluminum, copper, zinc. 25kg bag.
Main specification:1.0mm,1.5mm,2.0mm,2.5mm. The quality of products has met SAE & ISO international standards and the company has passed international standard ISO9001. The products have been exported to more than 20 countries and regions and have got a high reputation from home and abroad.
