Envirosafe Arctic air for R12 Auto AC Refrigerant This specialized Enviro Safe product combines two effective cooling agents to maximize A/C performance, especially in automotive systems. It is designed to reduce moisture and friction within the A/C system, preventing issues like corrosion and system freeze-ups while boosting cooling efficiency and extending the lifespan of components. Key Benefits: Moisture Removal: Helps prevent corrosion and freeze-ups in the A/C system. Enhanced Cooling: Provides colder air duct temperatures for increased comfort. Extended System Life: Reduces friction within the system, resulting in a longer-lasting A/C. A/C Booster: Increases overall cooling efficiency for improved performance. Compatibility: Safe for use with all automotive refrigerants, excluding ammonia and COâ?? systems. Installation & Usage: Propelled by Gas: Installs easily, similar to refrigerant. Note: Should not be added to a fully charged system. Pricing & Availability: !!! Please Contact us for pricing based on your quantity needs.!!!!!!!!!!!!
GERMALL PLUS is a combination of Diazolidinyl Urea and IPBC pre-dissolved in Propylene Glycol for ease of use. This combination exhibits a synergistic preservative effect, which reduces the total active preservative level necessary; provides for complete, broad spectrum preservation against Gram-positive and Gram-negative bacteria, yeast, and mold. Compatible with most cosmetic raw materials. Can be used in a wide variety of leave-on and rinse-off personal care formulations for reliable preservation. Recommended use levels in a finished formulation is 0.1-0.5%. Add at 50�°C or below during the cool down stage of processing. Every cosmetic formulation requires a specific preservative system to meet its individual needs. Therefore, every newly developed or modified product should be challenge tested to assure preservative efficacy.
1.It is an efficient low temperature bleaching activator and widely used in laundry powder, color bleaching powder, dishwasher and other solid detergents and detergents. 2.Tetraacetylethylenediamine (TAED) can be biodegraded without any harm to the environment. In various detergent formulations, TAED does not affect the functions of detergents such as silicate, brightener and enzyme, and is mainly used as an additive of oxygen bleaching agent. Oxygen bleaching agent can give full play to the unique effects of whitening, brightening, disinfection and sterilization at low temperature. It has good compatibility with various enzymes and other surfactants and is non-toxic. It completely reacts and decomposes at the water temperature of 30-60 C and releases reactive oxygen species, thus achieving the effects of energy saving, efficient bleaching and safe washing.
Clear Plastic Dome Lid with No Hole for 9 and 12 oz Cups 93mm 1000Case This lid creates a tight seal when used with the compatible cups keeping contents fresh This combined with its no hole design prevent spills and leaks It is also made of recycled PET material making it an environmentally friendly choice A musthave for any kiosk concession stand fast food restaurant or togo establishment this dome lid is the perfect addition to your venue Additional information Weight 1063 lbs Dimensions 1575 945 1929 in Quantity 1 0 0 0 c a s e Type lids Material PET Plastic Color clear Diameter 366 Inches 93mm Item No FHG001475
FEATURES Designed for high performance vehicles with extreme high power demands High cold cranking ability at sub zero temperature Exceeds original equipments (OE) requirements PRODUCT APPLICATION Generator Rickshaw Characteristics Instant Start & Excellent Dry Charge Performance Short pitch design for utmost performance during initial cranking of engine Special expander used for excellent starting at -15 �°C All car batteries are aluminum sealed Special separators are used to reduce the internal resistance Minimum water loss during usage of battery Repeated cranking performance without drop in capacity High Rate of Discharge characteristics compatible to the cranking current of the vehicle High Quality Polypropylene containers for long life of battery Specifications Nominal Voltage 12V Capacity @ 20 HR 20 AH Number of Plates 5 Dimension (mm) L 195 Dimension (mm) W 127 Dimension (mm) H 200 Dimension (mm) H with T 220 Battery Weight (KG) 5.08
FEATURES Designed for high performance vehicles with extreme high power demands High cold cranking ability at sub zero temperature Exceeds original equipments (OE) requirements PRODUCT APPLICATION 660cc - 1000cc vehicles Characteristics Instant Start & Excellent Dry Charge Performance Short pitch design for utmost performance during initial cranking of engine Special expander used for excellent starting at -15 C All car batteries are aluminum sealed Special separators are used to reduce the internal resistance Minimum water loss during usage of battery Repeated cranking performance without drop in capacity High Rate of Discharge characteristics compatible to the cranking current of the vehicle High Quality Polypropylene containers for long life of battery Specifications Nominal Voltage : 12V Capacity @ 20 HR : 34 AH Number of Plates : 9 Dimension (mm)L : 195 Dimension (mm)W : 127 Dimension (mm)H : 200 Dimension (mm)H with T : 220 Battery Weight IN KG : 7
FEATURES Designed for high performance vehicles with extreme high power demands High cold cranking ability at sub zero temperature Exceeds original equipments (OE) requirements PRODUCT APPLICATION 1000cc - 1300cc vehicles Characteristics Instant Start & Excellent Dry Charge Performance Short pitch design for utmost performance during initial cranking of engine Special expander used for excellent starting at -15 C All car batteries are aluminum sealed Special separators are used to reduce the internal resistance Minimum water loss during usage of battery Repeated cranking performance without drop in capacity High Rate of Discharge characteristics compatible to the cranking current of the vehicle High Quality Polypropylene containers for long life of battery Specifications Nominal Voltage : 12V Capacity @ 20 HR : 40 AH Number of Plates : 11 Dimension (mm) L : 195 Dimension (mm) W : 127 Dimension (mm) H : 200 Dimension (mm) H with T : 220 Battery Weight (KG) : 8.25
FEATURES Designed for high performance vehicles with extreme high power demands High cold cranking ability at sub zero temperature Exceeds original equipments (OE) requirements PRODUCT APPLICATION 1000cc - 1300cc vehicles 1300cc - 1800cc vehicles Characteristics Instant Start & Excellent Dry Charge Performance Short pitch design for utmost performance during initial cranking of engine Special expander used for excellent starting at -15 C All car batteries are aluminum sealed Special separators are used to reduce the internal resistance Minimum water loss during usage of battery Repeated cranking performance without drop in capacity High Rate of Discharge characteristics compatible to the cranking current of the vehicle High Quality Polypropylene containers for long life of battery Specifications Nominal Voltage : 12V Capacity @ 20 HR : 40 AH No Of Plates : 11 Dimension (mm)L : 232 Dimension (mm)W : 132 Dimension (mm)H : 202 Dimension (mm)H with T : 222 Battery Weight IN KG : 8.50
FEATURES Designed for high performance vehicles with extreme high power demands. High cold cranking ability at sub zero temperature. Exceeds original equipments (OE) requirements. PRODUCT APPLICATION 1300cc - 1800cc vehicles Characteristics Instant Start & Excellent Dry Charge Performance. Short pitch design for utmost performance during initial cranking of engine. Special expander used for excellent starting at -15 C. All car batteries are aluminum sealed. Special separators are used to reduce the internal resistance. Minimum water loss during usage of battery. Repeated cranking performance without drop in capacity. High Rate of Discharge characteristics compatible to the cranking current of the vehicle. High Quality Polypropylene containers for long life of battery. Specifications Nominal Voltage : 12V Capacity @ 20 HR : 50 AH No Of Plates : 12 Dimension (mm)L : 232 Dimension (mm)W : 132 Dimension (mm)H : 202 Dimension (mm)H with T : 222 Battery Weight IN KG : 9.20
FEATURES Designed for high performance vehicles with extreme high power demands High cold cranking ability at sub zero temperature Exceeds original equipments (OE) requirements PRODUCT APPLICATION Generator Rickshaw Characteristics Instant Start & Excellent Dry Charge Performance Short pitch design for utmost performance during initial cranking of engine Special expander used for excellent starting at -15 �°C All car batteries are aluminum sealed Special separators are used to reduce the internal resistance Minimum water loss during usage of battery Repeated cranking performance without drop in capacity High Rate of Discharge characteristics compatible to the cranking current of the vehicle High Quality Polypropylene containers for long life of battery Specifications Nominal Voltage : 12V Capacity @ 20 HR : 25 AH Number of Plates : 7 Dimension (mm)L : 195 Dimension (mm)W : 127 Dimension (mm)H : 200 Dimension (mm)H with T : 220 Battery Weight In Kg : 6.22
10g xenpak transceiver Description: Poflink's xenpak is a standardized form factor for 10 gb/s fiber optic transponders that is used for data transfer rates from 10.3 gb/s to 10.5 gb/s. It is protocol-specific: either 10g ethernet or 10g fibre channel versions are available. Xenpak transponders are used in datacom optical links only (not telecom). Its electrical interface to the host board is also standardized and is called xaui (4 x 3.125 gb/s). Poflink offers the whole series of 10g xenpak, including: Xenpak 10gbase-sr 300m (mmf om3); Xenpak 10gbase-lr smf 10-20km; Xenpak 10gbase-er smf 40km; Xenpak 10gbase-zr smf 80km Features: Hot pluggable x2 msa form factor Low total power consumption Rohs-6 compliant (lead-free) Temperature range 0¡ãc to 70¡ãc Transmission distance 300m, 10km, 40km, 80 km Cooled 1550nm eml or uncooled directly modulated distributed feedback (dfb) Sc connector, single mode fiber Full duplex transmission mode Digital optics monitoring (dom) Power supply: +5.0 v, +3.3 v Xaui electrical interface 4 x 3.125 gb/s ethernet(ftlx1841e2) Management and control via mdio 2-wire bus De-latch Xenpak 10gbase-zr smf 80km 1pcs/plastic box, 0.2kg/pcs
C-Arm Provision Hydraulic Product Code: MEF6068 Description Compatible with C-arm Image Intensifier used for orthopedics surgery. Can also be used for general surgeries like Cardiac, Gynae, Urology, and Endoscopy. The table top is made of radio-translucent material. Head and leg sections are Interchangeable.
CISCO SFP-10G-SR Used, genuine , grade a condition Have 300+ in stock for sale Warranty 365days full tested .
TYPICAL PROPERTIES Sr. Property Units Specs. Test Methods 1 Kinematic Viscosity @ 100 C cSt 2.47 ASTM D-445 2 Kinematic Viscosity @ 40 C cSt 7.16 ASTM D-445 3 Density @ 15 C Kg/m3 0.8394 ASTM D-7042 4 Flash Point, ,COC, Min. C 122 ASTM D-92 5 Color- Max - 0.5 ASTM D-1500 6 Appearance - C & B Visual 7 Viscosity Index - 203 ASTM D-2270 8 Pour Point C -6 ASTM D-97
TYPICAL PROPERTIES Sr. Property Units Specs. Test Methods 1 Kinematic Viscosity @ 100 C cSt 2.69 ASTM D-445 2 Kinematic Viscosity @ 40 C cSt 8.72 ASTM D-445 3 Density @ 15 C Kg/m3 0.8396 ASTM D-7042 4 Flash Point, ,COC, Min. C 144 ASTM D-92 5 Color- Max - 1.0 ASTM D-1500 6 Appearance - C & B Visual 7 Viscosity Index - 161 ASTM D-2270 8 Pour Point C -6 ASTM D-97 Base oil SN70, the base stocks has become the most widely used base oil in Middle East and Asia. It is the workhouse ingredient for formulators and blenders of lubricants for passengers and commercial vehicles, as well as industrials applications. Applications :superior quality component for automotive and industrial applications. Safety & Handling: It is stable in ambient conditions, non-corrosive and it can be stored in mild steel containers. The product is practically non-irritating to skin and eyes. Packing: Bulk, IBC Tank, Flexi Tank, New and Re-Conditioned Drums. Features and benefits: Consistency in formulation Market general packages with a range of additives Superior supply chain / delivery logistics
TYPICAL PROPERTIES Sr. Property Units Specs. Test Methods 1 Kinematic Viscosity @ 100 C cSt 0.88 ASTM D-445 2 Kinematic Viscosity @ 40 C cSt 1.93 ASTM D-445 3 Density @ 15 C Gram/cm3 0.8247 ASTM D-4052 4 Flash Point C 78 ASTM D-92 5 Color N.A. L0.5 ASTM D-1500 6 Appearance N.A. Bright & Clear Visual 7 Viscosity Index N.A. 91 ASTM D-2270 8 Pour Point C -36 ASTM D-97 Applications: superior quality component for automotive and industrial applications. Safety & Handling: It is stable in ambient conditions, non-corrosive and it can be stored in mild steel containers. The product is practically non-irritating to skin and eyes. Packing: Bulk, IBC Tank, Flexi Tank, New and Re-Conditioned Drums. Features and benefits: Consistency in formulation Market general packages with a range of additives Superior supply chain / delivery logistics
TYPICAL PROPERTIES Sr. Property Units Specs. Test Methods 1 Kinematic Viscosity @ 100 C cSt 2.5 - 2.8 ASTM D-445 2 Kinematic Viscosity @ 40 C cSt 6.0 -9.0 ASTM D-445 3 Density @ 15 C Kg/m3 830-840 ASTM D-7042 4 Flash Point, ,COC, Min. C 140 ASTM D-92 5 Sulphur Content, Max. ppm wt.% 15 ASTM D-4294 6 Color- Max - 1.0 ASTM D-1500 7 Appearance - C & B Visual 8 Distillation Range, IBP, Min. C 250 ASTM D-86 9 Distillation Range, FBP, Min.C 380 ASTM D-86 Base oil SN50, the base stocks has become the most widely used base oil in Middle East and Asia. It is the workhouse ingredient for formulators and blenders of lubricants for assengers and commercial vehicles, as well as industrials applications. Applications: superior quality component for automotive and industrial applications. Safety & Handling: It is stable in ambient conditions, non-corrosive and it can be stored in mild steel containers. The product is practically non-irritating to skin and eyes. Packing: Bulk, IBC Tank, Flexi Tank, New and Re-Conditioned Drums. Features and benefits: Consistency in formulation Market general packages with a range of additives Superior supply chain / delivery logistics
1) Package:SFP+; 2) Data Rate:10Gbps; 3) Distance:300m; 4) Wavelength:850nm; 5) Connector:Duplex LC; 6) Fiber Type:Multi-mode fiber(MMF); 7) Power Supply:3.3 single power supply; 8) Operating temperature:0 to 70; 9) DDM: With Digital Diagnostic Monitor; 10) Others:Compliant with 10GBASE-SR standards,SFP+ MSA specification and IEEE 802.3AE. 11) Application:10GBASE-SR/SW,10G Ethernet.
a. Name of product - M+D Nitrile Powder Free Gloves b. Price of product - Ranging from 6.70 EURO - 6.35 EURO depending on the amount of product ordered c. Product origin - Thailand d. Key Specifications/Special Features Protects against a wide range of chemicals. Superior strength with better puncture resistance. Biologically Compatible. Softness and shape provide excellent comfort. Beaded cuff enhances donning and prevents rollback. High tensile strength and elongation. Ambidextrous and straight fingers. Free from dirt marks, oil stains, embedded foreign particles, coagulum, etc. Completely free of talc. Non-Allergic. Polymer Coated for easy donning. Fully textured grip for great performance in all conditions. e. Harmonization System (HS) Code - N/A f. Minimum Order Size - 1 container = 33,000 boxes g. Packaging details - 100 pcs per Box - 10Boxes per Carton
Cable Standard Generally conforms to EN-50525-2-21, DIN VDE 0282 part 810,IEC 245 Cable Features - Special heat resistant insulation - High current carrying capacity - Less heat energy radiation - Longer life - High compatibility of cores - Excellent resistant to moisture, abrasion, grace, oil - Excellent mechanical & electrical properties - Insulation is highly thermal stable - Harmonized acc. to European standards Technical Data Working Temp : -25�?�°C to 70�?�°C Operating Temp : -20�?�°C to max. +90�?�°C Nominal Voltage : 450/750 V Test Voltage : 2500V Min. Bending Radius : 6 x cable Diameter Flame propagation : Flame retardant test as per IEC 60332-1-2 Standard Packing Coils 100, 200,500 and 1000m Conductor Flexible bare Class 5 copper conductor according to DIN VDE 0295,IEC 60228 Insulation Rubber Type El-4 to VDE 0282 Part-1 Sheath Neoprene Jacket Rubber Type EM-2 Color White, Black, Blue or as per customer order Core Identification 1 Core - Black 2 Core - Blue & Brown 3 Core - Yellow/green, Blue, Brown 4 Core - Yellow/green, Blue, Brown, Black or Yellow/Green, Brown, Black, Grey 5 Core - Yellow/Green, Blue, Brown, Black and Grey Application H07RN-F rubber insulated and sheathed cables are intended for flexible connection to electrical equipment. They are suitable for both indoor and outdoor use in industrial and agricultural plant and on construction sites
