Sr. No. Grade Name Specifications C S Si Mn P Ti 1 Basic Grade - BG06XA 3.5% - 4.6% 0.08% max 1.00% max 0.4% - 1.2% 0.10% max Nil 2 Basic Grade - BG06X 3.5% - 4.6% 0.05% max 1.25% max 0.4% - 1.2% 0.140% max Nil 3 Basic Grade - BG06X 3.5% - 4.6% 0.08% max 1.00% - 1.25% 0.4% - 1.2% 0.10% max 0.07% max 4 Basic Grade - BG05 3.5% - 4.6% 0.07% max 1.25% - 1.50% 0.4% - 1.2% 0.14% max Nil 5 Basic Grade - BG05A 3.5% - 4.6% 0.07% max 1.25% - 1.50% 0.4% - 1.05% 0.10% - 0.14% Nil 6 Basic Grade - SFG05X 3.5% - 4.6% 0.07% max 1.50% - 1.75% 0.9% Max 0.10% max 0.100% Max 7 Basic Grade - SFG05X 3.5% - 4.6% 0.07% max 1.50% - 2.00% 1.05% Max 0.10% max 0.100% Max 8 Foundry Grade - FG10 3.5% - 4.6% 0.07% max 1.75% - 2.00% 0.4% - 0.8% 0.140% max
GERMALL PLUS is a combination of Diazolidinyl Urea and IPBC pre-dissolved in Propylene Glycol for ease of use. This combination exhibits a synergistic preservative effect, which reduces the total active preservative level necessary; provides for complete, broad spectrum preservation against Gram-positive and Gram-negative bacteria, yeast, and mold. Compatible with most cosmetic raw materials. Can be used in a wide variety of leave-on and rinse-off personal care formulations for reliable preservation. Recommended use levels in a finished formulation is 0.1-0.5%. Add at 50�°C or below during the cool down stage of processing. Every cosmetic formulation requires a specific preservative system to meet its individual needs. Therefore, every newly developed or modified product should be challenge tested to assure preservative efficacy.
1.It is an efficient low temperature bleaching activator and widely used in laundry powder, color bleaching powder, dishwasher and other solid detergents and detergents. 2.Tetraacetylethylenediamine (TAED) can be biodegraded without any harm to the environment. In various detergent formulations, TAED does not affect the functions of detergents such as silicate, brightener and enzyme, and is mainly used as an additive of oxygen bleaching agent. Oxygen bleaching agent can give full play to the unique effects of whitening, brightening, disinfection and sterilization at low temperature. It has good compatibility with various enzymes and other surfactants and is non-toxic. It completely reacts and decomposes at the water temperature of 30-60 C and releases reactive oxygen species, thus achieving the effects of energy saving, efficient bleaching and safe washing.
Clear Plastic Dome Lid with No Hole for 9 and 12 oz Cups 93mm 1000Case This lid creates a tight seal when used with the compatible cups keeping contents fresh This combined with its no hole design prevent spills and leaks It is also made of recycled PET material making it an environmentally friendly choice A musthave for any kiosk concession stand fast food restaurant or togo establishment this dome lid is the perfect addition to your venue Additional information Weight 1063 lbs Dimensions 1575 945 1929 in Quantity 1 0 0 0 c a s e Type lids Material PET Plastic Color clear Diameter 366 Inches 93mm Item No FHG001475
FEATURES Designed for high performance vehicles with extreme high power demands High cold cranking ability at sub zero temperature Exceeds original equipments (OE) requirements PRODUCT APPLICATION Generator Rickshaw Characteristics Instant Start & Excellent Dry Charge Performance Short pitch design for utmost performance during initial cranking of engine Special expander used for excellent starting at -15 �°C All car batteries are aluminum sealed Special separators are used to reduce the internal resistance Minimum water loss during usage of battery Repeated cranking performance without drop in capacity High Rate of Discharge characteristics compatible to the cranking current of the vehicle High Quality Polypropylene containers for long life of battery Specifications Nominal Voltage 12V Capacity @ 20 HR 20 AH Number of Plates 5 Dimension (mm) L 195 Dimension (mm) W 127 Dimension (mm) H 200 Dimension (mm) H with T 220 Battery Weight (KG) 5.08
FEATURES Designed for high performance vehicles with extreme high power demands High cold cranking ability at sub zero temperature Exceeds original equipments (OE) requirements PRODUCT APPLICATION 660cc - 1000cc vehicles Characteristics Instant Start & Excellent Dry Charge Performance Short pitch design for utmost performance during initial cranking of engine Special expander used for excellent starting at -15 C All car batteries are aluminum sealed Special separators are used to reduce the internal resistance Minimum water loss during usage of battery Repeated cranking performance without drop in capacity High Rate of Discharge characteristics compatible to the cranking current of the vehicle High Quality Polypropylene containers for long life of battery Specifications Nominal Voltage : 12V Capacity @ 20 HR : 34 AH Number of Plates : 9 Dimension (mm)L : 195 Dimension (mm)W : 127 Dimension (mm)H : 200 Dimension (mm)H with T : 220 Battery Weight IN KG : 7
FEATURES Designed for high performance vehicles with extreme high power demands High cold cranking ability at sub zero temperature Exceeds original equipments (OE) requirements PRODUCT APPLICATION 1000cc - 1300cc vehicles Characteristics Instant Start & Excellent Dry Charge Performance Short pitch design for utmost performance during initial cranking of engine Special expander used for excellent starting at -15 C All car batteries are aluminum sealed Special separators are used to reduce the internal resistance Minimum water loss during usage of battery Repeated cranking performance without drop in capacity High Rate of Discharge characteristics compatible to the cranking current of the vehicle High Quality Polypropylene containers for long life of battery Specifications Nominal Voltage : 12V Capacity @ 20 HR : 40 AH Number of Plates : 11 Dimension (mm) L : 195 Dimension (mm) W : 127 Dimension (mm) H : 200 Dimension (mm) H with T : 220 Battery Weight (KG) : 8.25
FEATURES Designed for high performance vehicles with extreme high power demands High cold cranking ability at sub zero temperature Exceeds original equipments (OE) requirements PRODUCT APPLICATION 1000cc - 1300cc vehicles 1300cc - 1800cc vehicles Characteristics Instant Start & Excellent Dry Charge Performance Short pitch design for utmost performance during initial cranking of engine Special expander used for excellent starting at -15 C All car batteries are aluminum sealed Special separators are used to reduce the internal resistance Minimum water loss during usage of battery Repeated cranking performance without drop in capacity High Rate of Discharge characteristics compatible to the cranking current of the vehicle High Quality Polypropylene containers for long life of battery Specifications Nominal Voltage : 12V Capacity @ 20 HR : 40 AH No Of Plates : 11 Dimension (mm)L : 232 Dimension (mm)W : 132 Dimension (mm)H : 202 Dimension (mm)H with T : 222 Battery Weight IN KG : 8.50
FEATURES Designed for high performance vehicles with extreme high power demands. High cold cranking ability at sub zero temperature. Exceeds original equipments (OE) requirements. PRODUCT APPLICATION 1300cc - 1800cc vehicles Characteristics Instant Start & Excellent Dry Charge Performance. Short pitch design for utmost performance during initial cranking of engine. Special expander used for excellent starting at -15 C. All car batteries are aluminum sealed. Special separators are used to reduce the internal resistance. Minimum water loss during usage of battery. Repeated cranking performance without drop in capacity. High Rate of Discharge characteristics compatible to the cranking current of the vehicle. High Quality Polypropylene containers for long life of battery. Specifications Nominal Voltage : 12V Capacity @ 20 HR : 50 AH No Of Plates : 12 Dimension (mm)L : 232 Dimension (mm)W : 132 Dimension (mm)H : 202 Dimension (mm)H with T : 222 Battery Weight IN KG : 9.20
FEATURES Designed for high performance vehicles with extreme high power demands High cold cranking ability at sub zero temperature Exceeds original equipments (OE) requirements PRODUCT APPLICATION Generator Rickshaw Characteristics Instant Start & Excellent Dry Charge Performance Short pitch design for utmost performance during initial cranking of engine Special expander used for excellent starting at -15 �°C All car batteries are aluminum sealed Special separators are used to reduce the internal resistance Minimum water loss during usage of battery Repeated cranking performance without drop in capacity High Rate of Discharge characteristics compatible to the cranking current of the vehicle High Quality Polypropylene containers for long life of battery Specifications Nominal Voltage : 12V Capacity @ 20 HR : 25 AH Number of Plates : 7 Dimension (mm)L : 195 Dimension (mm)W : 127 Dimension (mm)H : 200 Dimension (mm)H with T : 220 Battery Weight In Kg : 6.22
Xaui electrical interface: 4 lanes @ 3.125gbit/s Hot z-pluggable Sc-duplex optical receptacle Mdio, dom support 850nm vcsel Pin photo-detector Operating case temperature: 0 to 70 üïc Compliant to ieee 802.3ae 10gbase-sr application Compliant to xenpak msa Individual or bulk packing
Xaui electrical interface: 4 lanes @ 3.125gbit/s Hot z-pluggable Sc-duplex optical receptacle Mdio, dom support 850nm vcsel Pin photo-detector Operating case temperature: 0 to 70 üïc Compliant to ieee 802.3ae 10gbase-sr application Compliant to xenpak msa Individual or bulk packing
- Material26MnB5, 34MnB5, EN 10305-2 (DIN 2393) - Technical: Seamless Or Welded; Process: Cold Drawn, Cold Rolled; - Delivery Condition: +C, +N, +SR,+NBK; - Diameter: 20 - 60 mm, Wall thickness: 1.5 - 7.5 mm; Length: Customizable; - Application: Stabiliser, Monobloc shaft, Gear shaft etc.; - Requirements: Excellent reshaping properties (drawing in, hammering), High torsional strength and durability, Excellent welding properties, High levels of geometrical accuracy (eccentricity, roundness), Excellent surface-finish condition.
- Material: 100Cr6, SKF3, GCr15, SKF3S; - Technical: Seamless , Process: Piercing, Cold Drawing, Spheroidizing Annealing, Annealing etc.; - Size Range: OD 10 ~ 160 mm, Wall thickness: 1~ 25 mm; Length: Customized; - Delivery Condition: (1) +C No heat treatment after the final cold drawing process, (2) +LC After the final heat treatment there is a suitable drawing pass,(3) +SR After the final cold drawing process there is a stress relieve heat treatment in a controlled atmosphere, (4) +A After the final cold drawing process the tubes are annealed in a controlled atmosphere, (5) +N After the final cold drawing operation the tubes are normalized in a controlled atmosphere; - Application: Widely Used in Bearing Industry and Automotive Parts, such as Hydraulic Cylinder Pipe, Steel ball, roller and collar of large machinery bearing, axis of rotation, blade, stator pump, profiling, sleeve, mandril, etc.; - Features: High and uniform hardness and wear resistance, and high elastic limit.
CISCO SFP-10G-SR Used, genuine , grade a condition Have 300+ in stock for sale Warranty 365days full tested .
10g x2 transceiver Description: Poflink's x2 is a standardized factor for 10 gb/s fiber optic transponders that is used for data transfer rates 10.3 gb/s to 10.5 gb/s. It is protocol-specific: either 10g ethernet or 10g fibre channel versions are available. X2 transponders are used in datacom optical links only (not telecom), and they are smaller than old generation xenpak transponders. Its electrical interface to the host board is also standardized and is called xaui (4 x 3.125 gb/s). Poflink manufactures x2-10g-sr 300m, x2-10g-lr 10km, x2-10g-er 40km, x2-10g-zr 80km optical modules. All modules support digital optical monitoring (dom) function . Features: Hot pluggable x2 msa form factor Low total power consumption: Transmission distance 300m, 10km, 40km, 80 km Cooled 1550nm eml or uncooled directly modulated distributed feedback (dfb) Full duplex transmission mode Digital optics monitoring (dom) 10pcs/plastic box 0.1kg/pcs
TYPICAL PROPERTIES Sr. Property Units Specs. Test Methods 1 Kinematic Viscosity @ 100 C cSt 2.47 ASTM D-445 2 Kinematic Viscosity @ 40 C cSt 7.16 ASTM D-445 3 Density @ 15 C Kg/m3 0.8394 ASTM D-7042 4 Flash Point, ,COC, Min. C 122 ASTM D-92 5 Color- Max - 0.5 ASTM D-1500 6 Appearance - C & B Visual 7 Viscosity Index - 203 ASTM D-2270 8 Pour Point C -6 ASTM D-97
1) Package:SFP+; 2) Data Rate:10Gbps; 3) Distance:300m; 4) Wavelength:850nm; 5) Connector:Duplex LC; 6) Fiber Type:Multi-mode fiber(MMF); 7) Power Supply:3.3 single power supply; 8) Operating temperature:0 to 70; 9) DDM: With Digital Diagnostic Monitor; 10) Others:Compliant with 10GBASE-SR standards,SFP+ MSA specification and IEEE 802.3AE. 11) Application:10GBASE-SR/SW,10G Ethernet.
TYPICAL PROPERTIES Sr. Property Units Specs. Test Methods 1 Kinematic Viscosity @ 100 C cSt 2.69 ASTM D-445 2 Kinematic Viscosity @ 40 C cSt 8.72 ASTM D-445 3 Density @ 15 C Kg/m3 0.8396 ASTM D-7042 4 Flash Point, ,COC, Min. C 144 ASTM D-92 5 Color- Max - 1.0 ASTM D-1500 6 Appearance - C & B Visual 7 Viscosity Index - 161 ASTM D-2270 8 Pour Point C -6 ASTM D-97 Base oil SN70, the base stocks has become the most widely used base oil in Middle East and Asia. It is the workhouse ingredient for formulators and blenders of lubricants for passengers and commercial vehicles, as well as industrials applications. Applications :superior quality component for automotive and industrial applications. Safety & Handling: It is stable in ambient conditions, non-corrosive and it can be stored in mild steel containers. The product is practically non-irritating to skin and eyes. Packing: Bulk, IBC Tank, Flexi Tank, New and Re-Conditioned Drums. Features and benefits: Consistency in formulation Market general packages with a range of additives Superior supply chain / delivery logistics
TYPICAL PROPERTIES Sr. Property Units Specs. Test Methods 1 Kinematic Viscosity @ 100 C cSt 0.88 ASTM D-445 2 Kinematic Viscosity @ 40 C cSt 1.93 ASTM D-445 3 Density @ 15 C Gram/cm3 0.8247 ASTM D-4052 4 Flash Point C 78 ASTM D-92 5 Color N.A. L0.5 ASTM D-1500 6 Appearance N.A. Bright & Clear Visual 7 Viscosity Index N.A. 91 ASTM D-2270 8 Pour Point C -36 ASTM D-97 Applications: superior quality component for automotive and industrial applications. Safety & Handling: It is stable in ambient conditions, non-corrosive and it can be stored in mild steel containers. The product is practically non-irritating to skin and eyes. Packing: Bulk, IBC Tank, Flexi Tank, New and Re-Conditioned Drums. Features and benefits: Consistency in formulation Market general packages with a range of additives Superior supply chain / delivery logistics