Pump type MA is the standard heavy duty slurry pump which designed for the continuous pumping of highly abrasive, high density slurries with minmal maintenance requirements. It maintains high eï¬?ciencies over the wear life of its components. This type of pump typically used in process plant transfers, wet waste processes, recycling-washing plant, sand plant duties, heavy minerals processing, mineral recovery and chemical process plant. Pump range: Discharge Size: 1" to 18" Capacity: 4 to 5400 m³/h Heads: 5 to 75 m Typical application: - Mill discharge - Coarse sand - Tailings - Mineral concentration - Heavy media - Coal washing - FGD - Process chemical - Bottom / fly ash - Metal smelting Product features; - Elastomer or high chrome alloy liners provide corrosion & abrasion resistance, plus the interchangeability to reduce the maintenance cost and maximize wear life - Large diameter, high eï¬?ciency impellers designed to oï¬?er maximum wear life and low operating cost, wide options of impeller for speciï¬?c applications - Gland, expeller or mechanical seals are available to suite diï¬?erent working conditions - The bearing can be grease or oil lubricated which oï¬?er ease of maintenance and reduced downtime - The pump can be installed in multi-stage high pressure operation - Large internal passage designed to reduce internal velocities, maximize wear life and lower operating cost Contact us for more information: Amanda Chen +86 19921054564
Design Features: Horizontal, Centrifugal, Free Shaft Extension Pump fitted with single stage closed Impeller in Volute Casing having axial end suction and vertical centerline delivery. In-corporating Back-Pull-Out facility. Custom-built Design: Pumps with different operating speed / material of construction / temperature can be offered on request.
Tobee Slurry pumps are recommended for pumping liquids containing small or large suspended solids. They are designed for continuous pumping of highly abrasive and corrosive slurry. The 4x3C-AH pumps feature patented innovative designs that can significantly reduce the operational costs of slurry pumping, It is widely used in industry of mining, electrical power, metallurgy, coal, environmental protection, etc for transportation of abrasive solid slurry. Tobee�® 4-3C-AH Slurry Pump for Cleaning coal thickening cyclone, Cyclone underflow pump is a type of centrifugal pump, lobe pump or peristaltic hose pump in physics principle that increases the pressure of liquid and solid particle mixture (aka slurry), through centrifugal force (a rotating impeller) and converts electrical energy into slurry potential and kinetic energy. Tobee�® 4x3C AH Slurry Pump SPECIFICATIONS: Size: 4" x 3" Capacity: 86.4-198m3/h Head: 9-52m Speed: 1000-2200rpm NPSHr: 4-6m Eff.: 71% Power: Max.30kw Handling solids: 28mm Materials: A05, A07, A33, A49, A51, A61, R08, R26, R55, U01 U38 etc
Product Description: 12x10ST-AH Slurry Pump is robust state of the art slurry pumps that feature oil or grease lubrication bearing assemblies and complete interchangeable with other major brands. The 12x10 centrifugal slurry pump can be supplied in high chrome alloy materials specifically designed for heavy duty slurry applications.
Slurry pump can be widely used in mines, electric power, metallurgy, coal, environmental protection and other industries transport slurry containing abrasive solid particles.Such as metallurgical mill pulp conveying, hydraulic ash thermal power plants, coal washery coal slurry and heavy media delivery, dredging river, river dredging, etc.In the chemical industry, also can carry some corrosive slurry containing crystallization. This series pumps are contain cantilever and horizontal centrifugal pumps which apply to transport slurry with strong corrosion proof and high concentration.
Single & multistage chemical process pumps. Contact us for detailed description. as per pump requirements.
Centrifugal Pumps
Horizontal Slurry Pumps, Metal Lined Slurry Pumps, Heavy Duty Slurry Pumps Model: SH/100D, SH/150E, SH/200F Series: Metal Lined Slurry Pumps General Introduction: Our horizontal slurry pumps are designed for heavy-duty applications such as mining, minerals processing, mill discharge, power plants, tailings, and other industrial applications, for maximum abrasion, erosion, and corrosion resistance. The pumps are in a wide range of sizes, available with both high chrome and ruber wearing parts. Components like impeller and volute come in a range of hard metal types and elastomer to suit the specific application. Different shaft seal types are available to suit every requirement, including gland packing seal, expeller seal and mechanical seal. Our metal lined slurry pumps are designed for heavy duty industrial applications, to handle the most arduous slurries. Wear resistant cast alloys are used for slurry pump liners and impellers where conditions are not suited to rubber, such as with coarse or sharp edged particles, or on duties having high impeller peripheral velocities or high operating temperatures. Applications: Heavy-duty slurry pumping applications, Mining and minerals processing, Mine refuse and tailings, Mill discharge, Cyclone feed, Sand and aggregates Driven Type: DC(z): The pump and the engine is directly connected by a coupling. Belt-driven Types: The pump and the engine is connected by pulleys and belts --- CV, CR(z), ZV(z).
4x3C-TH Slurry Pump is engineered with the latest hydraulic and wear technologies to cope with the most severe corrosive and abrasive slurry applications, The 4x3C-AH pumps feature patented innovative designs that can significantly reduce the operational costs of slurry pumping, It is widely used in industry of mining, electrical power, metallurgy, coal, environmental protection, etc for transportation of abrasive solid slurry. Design Features: â?? The 4x3 C TH slurry pump frame plates have replaceable wear-resistant metal liners, impellers & volute liners are made of wear-resistant metal(such as A05, A49,and other high chrome metal). â?? The 4x3 C TH slurry pump bearing assembly use cylindrical structure, adjusting the space between impeller& front liner easily, being removed completely when being repaired. Grease lubrication. â?? The 4x3 C TH slurry pump shaft seal could use the packing seal, expeller seal and mechanical seal. One pump also can be use packing seal with expeller seal together. â?? The discharge outlet can be positioned at intervals of 45 degrees by request and oriented to any 8 positions to suit installations and applications. â?? The 4x3 C TH slurry pump can be installed in multistage series to meet the delivery for long distance. â?? The 4x3 C TH slurry pump drive types, such as direct coupling drive (DC), V belt drive (CR, CV, ZV) etc.
Pump Size :- 25 to 150mm Capacity :- up to 660 m3hr. Head :- up to 160 m Discharge press :- up to 16 bar Temperature :- 30 to 1400C Speed :- up to 2900 rpm
Overview Type NDX pump is applicable for pumping clean water and liquids whose physical and chemical properties are similar to water and without solid particles. This series of products can be used in factories,mines,urban water supply and drainage,HAVC,industrial softened water and farmland irrigation and drainage,etc.It can also be used in pressure stabilization and water supply systems of urban fire control. Pump with the same specification can change the performance parameters by cutting the outer diameter of the impeller;the normal speed of the pump is 1450RPM and 2900RPM, if it is required to operate at the maximum speed of 3550RPM(60Hz power supply or with gasoline and diesel engine),our company can provide technical instruction on the change of the outer diameter of the impeller The type NDX pump features simple structure,reliable performance,small volume,light weight,high efficiency,good ati-cavitation performance, low power consumption and convenient use and maintenance The pump is suitable for pumping medium at temperature of -10~85 and working pressure of 1.0MPa,if there is a need to increase to 1.6MPa or higher,please specify when selecting and ordering Performance  Capacity: 5-1650m3/h  Head: 5-135 m Product Features Energy efficient: Applying the most advanced NRCE design software and CFD fluid simulation software to develop and design the high efficiency hydraulic model,through the analysis of pump flow field,temperature field and strength,thermal deformation,fracture,rotor dynamics,etc,to achieve high efficiency ,reliability and wide efficiency zone,we have made the pump satisfy the efficiency and reliability requirements of centrifugal pump operating under design conditions and non-design conditions, reaching the international advanced level. Rear opening type structure:The maintenance is convenient,It is not necessary to disassemble the suction and discharge pipes during maintenance to pull out the rotor parts for maintenance Quality assurance:Before casting,the imported chemical analysis of the materials was carried out by the direct reading spectrum analyzer introduced from Britain to ensure that the material composition meets the requirement.The pump impeller and rotor components are tested by precise dynamic balance test,so the pump can run more smoothly, have less vibration and noise and longer service life. Product orientation:Improve the technical level of the domestic equipment industry, effectively serve equipment and processes to meet the needs of safety,reliability,energy conservation and environmental Protection.
Zidong horizontal slurry pump, centrifugal, double casing structure, international quality, warman replacement pump. It is specially designed to convey solid-liquid mixtures containing high concentration, corrosive and abrasive, hard solid particles, such as: ore slurry, ash, slurry, gravel, etc. It is widely used in mining, metallurgy, power plant, chemical industry, etc.
Design Features: Horizontal, Centrifugal, Close-Coupled type pump fitted with single stage closed Impeller in Volute Casing having axial end suction and Vertical centerline delivery. In-corporating Back-Pull-Out facility. Custom-built Design: Pumps with different operating speed / material of construction / temperature can be offered on request.
Design Features: Vertical, Centrifugal, Monoblock (unibuilt) type pump fitted with single stage closed Impeller in Volute Casing having In-Line suction & delivery. Can be made available in Close-Coupled design also. Custom-built Design: Pumps with variable supply voltage / frequency and different material of construction can be offered on request.
1.5 1B-TH Slurry Pump is end-suction, split-case, centrifugal slurry pumps have set the world standard for heavy duty abrasive pumping applications. With large shaft diameters, heavy duty bearing assemblies and robust slurry pumping capacity, Application customization comes standard with this line by applying a wide variety of metallic and elastomeric parts options, an assortment of seal arrangements, and a standard impeller adjustment mechanism incorporated into every base assembly. Slurry Pump Design Features Slurry Pump wet parts are made of wear-resistant high chromium alloy. Slurry Pump bearing assembly use cylindrical structure, adjusting the space between impeller and front liner easily. They can be removed completely when being repaired. Bearing assembly use grease lubrication. International famous bearing The shaft seal could use the packing seal, expeller seal and mechanical seal for all slurry pump. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications at its working site. There are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices. Wide performance, good NPSH and high efficiency. The slurry pump can be installed in multistage series to meet the delivery for long distance.
PTFE Lined Centrifugal Pump, with mechanical seal and FLP motor of 380 V, 60 HZ. Stable for highly acidic / alkaline material.
We have Kirloskar Make Centrifugal END Suction , Split CAshing, Monoblock, Submersible,
Product Name - TULLU TOP 50 (Mini Super) AC/DC Product Description - Monoblock Universal Centrifugal Pump Price of product ( USD price or FOB price) -prices will be quoted directly to the clients upon enquiry. Product origin - Varanasi, Uttar Pradesh, India Key Specifications/Special Features - 1. Copper Winding. 2. Lifts Water upto 50 feet. 3. Can work either on AC or DC supply at 120 Volts. 4. Cast Iron Pump Unit with Sheet Metal Body for Sturdiness and Longer Life. Minimum Order Size and Packaging details - 20 feet container
Product Name - TULLU TOP 80 AC/DC Product Description - Monoblock Universal Centrifugal Pump Price of product ( USD price or FOB price) -prices will be quoted directly to the clients upon enquiry. Product origin - Varanasi, Uttar Pradesh, India Key Specifications/Special Features - 1. Copper Winding. 2. Lifts Water upto 80 feet. 3. Can work either on AC or DC supply at 120 Volts. 4. Cast Iron Pump Unit with Sheet Metal Body for Sturdiness and Longer Life. Minimum Order Size and Packaging details - 20 feet container
Product Name - TULLU TOP 60 (Super) AC/DC Product Description - Monoblock Universal Centrifugal Pump Price of product ( USD price or FOB price) -prices will be quoted directly to the clients upon enquiry. Product origin - Varanasi, Uttar Pradesh, India Key Specifications/Special Features - 1. Copper Winding. 2. Lifts Water upto 60 feet. 3. Can work either on AC or DC supply at 120 Volts. 4. Cast Iron Pump Unit with Sheet Metal Body for Sturdiness and Longer Life. Minimum Order Size and Packaging details - 20 feet container
