Ball Valves are used in a wide variety of high pressure applications. Two factors make them popular. First, a full unrestricted flow that allows no product restrictions through the valve. Second, the three piece design and the removal of a minimal number of bolts allow service to be performed without removing the complete valve from the line. We offers a range of high pressure valves that are also great for use as blowdown valves. Our product range also includes ball valve components and a variety of valve parts that ensure quick assembly, repair and use of your fittings. Two way ball valves manufactured by us will be various Sizes, End connections and Pressure Ratings as per customer requirements. Manual and Pneumatically actuated valves are also manufactured by us.
The ASME B16.34 Swing Check, and Y Type Swing Check Valves feature a pressure seal bonnet design for high-pressure services. These valves are extensively used in high pressure and high-temperature steam, oil, gas, chemical, and water applications in thermal power plants, fertilizer plants, petrochemical plants, and refineries. These valves are available in butt weld ends in pressure ratings of Classes 900, 1500 and 2500, and come in carbon steel and alloy steel construction.
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing �¢?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size �¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing �¢?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size �¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
