Atlas Copco 15 Hp Rotary Screw Air Compressor Suppliers and Manufacturers

V7 Borewell Submersible Pumpset Falcon Premium 175 mm (7) Borewell Submersible pumpsets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked in stainless steel stator shell. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - Cast iron casting bowl and SS-410 grade impeller in mix flow series - Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads. - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set - Dynamically balanced rotating parts ensures minimum vibration and longer life - Motor portion covered with corrosive resistance Stainless steel J4 shell - More durability and hygiene - High operating efficiency - Special designed thrust bearing to withstand high axial thrust load - Extremely hardwearing water lubricated bearing - Thread type motor construction ensures services feasibility - Designed for wide voltage operation - Best alternative for JET & Compressor pump set - Additional intermediate bearing in higher stage pumps Specification - Method of Starting : 3 ph -Direct Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 37.3 kW - Power Range : 11.2 kW to 37.3 kW (15 HP to 50 HP) - Version : Three Phase 350 to 415V, 50Hz AC Supply - Speed : 2880 RPM - Head Range : 18 Mtr. To 650 Mtr. - Discharge Range : 1860 LPM to 55 LPM - Outlet Size in Inch : 2.0 , 2.5 , 3.0 & 4.0 - Degree of Protection : IP 58 - Direction of Rotation : Electrically Reversible -3ph - Thrust Load : 11.2 kW -37.3 kW -8000 lbs - Minimum Cooling Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5

V3 Borewell Submersible Pumpset Falcon standard 73mm (3") Borewell Submersible pump is firmly coupled to a submersible electric motor which Operates by being submerged beneath the surface of the water. The optimal design of impeller and diffuser enables the best Possible hydraulic efficiency. Built-in check valve prevents back flow and reduces the risk of water hammering. All Vital components of these pumps are made up of corrosion resistance thermoplastic and the shaft is of SS 410. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - Motor portion covered with corrosive resistance Stainless steel (SS 204cu) shell - More durability and hygiene - High operating efficiency - Specially designed thrust bearing to withstand high axial thrust load - Extremely hardwearing water lubricated bearing - Thread type motor construction ensures service feasibility - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set - Designed for wide voltage operation - Best alternative for JET & Compressor pump set - Additional intermediate bearing in higher stage pumps. Specification - Power Range : 0.37 kW to 1.1 kW (0.50 HP to 1.5HP) - Version : Single Phase 160V to 230V, 50Hz, AC Supply - Speed : 2880 RPM - Head Range : 14 Mtr. to 96 Mtr. - Discharge Range : 70 LPM to 15 LPM - Outlet Size in Inch : 1.25" - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Minimum cooling 1pH - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m�²/sec (max.) - Ph Value : 6.5 to 8.5

V3 Borewell Submersible Pumpset Falcon standard 73mm (3") Borewell Submersible pump is firmly coupled to a submersible electric motor which Operates by being submerged beneath the surface of the water. The optimal design of impeller and diffuser enables the best Possible hydraulic efficiency. Built-in check valve prevents back flow and reduces the risk of water hammering. All Vital components of these pumps are made up of corrosion resistance thermoplastic and the shaft is of SS 410. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - Motor portion covered with corrosive resistance Stainless steel (SS 204cu) shell - More durability and hygiene - High operating efficiency - Specially designed thrust bearing to withstand high axial thrust load - Extremely hardwearing water lubricated bearing - Thread type motor construction ensures service feasibility - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set - Designed for wide voltage operation - Best alternative for JET & Compressor pump set - Additional intermediate bearing in higher stage pumps. Specification - Power Range : 0.37 kW to 1.1 kW (0.50 HP to 1.5HP) - Version : Single Phase 160V to 230V, 50Hz, AC Supply - Speed : 2880 RPM - Head Range : 14 Mtr. to 96 Mtr. - Discharge Range : 70 LPM to 15 LPM - Outlet Size in Inch : 1.25" - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Minimum cooling 1pH - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5

MRCOOL DIY 36K BTU Ductless Mini Split Heat Pump Complete System Energy Star 4th Gen DIY-36-HP-WM-230C25 Key Features: Up to 18 SEER efficiency Gold Fin condenser: Corrosion-resistant, ideal for coastal environments Variable-speed DC inverter compressor: Reduces operating costs R-410A refrigerant: Environmentally friendly Standard 7-year compressor/5-year parts warranty with optional registration for a limited lifetime compressor warranty The MRCOOL 4th Generation DIY 36K BTU, 18 SEER Ductless Heat Pump is one of the most powerful single-zone systems in the DIY Series, designed to heat and cool areas up to 1,500 sq. ft. This complete system includes a 36K condenser, 36K air handler, and a 25 ft. pre-charged line set filled with R-410A refrigerant. With its impressive 18 SEER efficiency rating, it delivers exceptional performance while remaining energy-efficient. What makes this system even more appealing is its easy DIY installation. Thanks to the patented MRCOOL Pre-Charged Quick-Connect Line Set, homeowners can install the system using just a few hand tools, making refrigerant piping connections as simple as turning a few wrenches. Beyond performance and ease of installation, this system boasts multiple operational features. Users can choose from six operating modes: AUTO, HEAT, COOL, FAN-ONLY, DRY (dehumidification), and SLEEP, ensuring customized comfort for every situation. The "Follow Me" function continuously adjusts the room temperature based on the reading from the handheld remotes location, maximizing comfort. Additionally, the system can be controlled remotely via the Smart HVAC app, compatible with both Apple and Android smartphones. MRCOOL backs this product with a limited lifetime compressor warranty, offering long-term peace of mind.

MRCOOL DIY 12K BTU Ductless Mini Split Heat Pump Complete System Energy Star 4th Gen DIY-12-HP-WM-115C25 Key Features: Up to 22 SEER efficiency Gold Fin condenser: Corrosion-resistant, ideal for coastal environments Variable-speed DC inverter compressor: Lowers operating costs R-410A refrigerant: Environmentally friendly Standard 7-year compressor/5-year parts warranty with optional registration for a limited lifetime compressor warranty Introducing the latest advancement in home comfort technology: the 4th Generation MRCOOL DIY 12K BTU, 22 SEER Ductless Heat Pump System. This powerful single-zone unit is designed to efficiently heat and cool areas up to 500 sq. ft. It comes complete with a 12K condenser, 12K air handler, and a 25 ft. pre-charged line set filled with R-410A refrigerant. Installation is made easy with quick connectors, requiring no special tools, equipment, or professional training. What sets the MRCOOL DIY system apart from its competitors is its exceptional 22 SEER efficiency rating, earning it Energy Star certification for energy savings and performance. With multiple operating modes HEAT, COOL, DRY (dehumidification), and SLEEP users can customize their comfort to suit their preferences. The system also features the "Follow Me" function, which automatically adjusts the room temperature based on the readings from the handheld remote. For added convenience, the system can be fully controlled via smartphone using the Smart HVAC app, giving users remote access to all modes and functions. MRCOOL is the only brand to offer a limited lifetime compressor warranty, showcasing their confidence in the system's durability. !!!!!!!!!!!PLEASE SEND YOUR INQUIRY FOR OUR BEST WHOLESALE PRICES!!!!!!!!!!