Find Verified Aerosol Propellant Gases %28Apg%29 Suppliers, Manufacturers and Wholesalers

LPG stands for Liquefied Petroleum Gas. It is a fuel made mainly from propane and butane gases that are compressed into a liquid form for easy storage and transportation. LPG is also known as " cooking gas" or " auto gas"

LPG is a mix of light hydrocarbon gases, mainly propane C3H8 + butane C4H10. It comes from Crude oil refining and Natural gas processing.

Key properties:
Composition: Propane C3H8 + Butane C4H10 Light hydrocarbons.
State: Gas at room temp, liquid under pressure Liquefies at 20x atmospheric pressure.
Smell: Odorless naturally, but ethanethiol/ethyl mercaptan is added so leaks smell like rotten eggs.
Density: Heavier than air. Leaks sink to ground, can run along floors/drains.
Boiling point: Propane -42C, Butane -0.5C Vaporizes instantly if spilled.
Energy: ~94 MJ/m³, higher than natural gas 38 MJ/m³.
Storage: Steel cylinders/tanks. 1L liquid - ~250L gas when vaporized.
Sulfur: Almost zero sulfur = clean burning.

Key facts:
1. Source: Comes from 2 places: 1) Natural gas processing wet gas, 2) Crude oil refining as top distillate
2. Pressure storage: Unlike LNG -162C, LPG stores as liquid at room temp with just 8-10 bar pressure. Much simpler
3. Clean fuel: Zero sulfur, burns with blue flame, no soot. 50% used for cooking/heating
4. Heavier than air: LPG vapor sinks and flows along ground. Leak = explosion risk in drains/basements
5. Autogas: LPG for cars. Cheaper than petrol, but needs LPG tank + converter kit.

Grades/blends:
1. Propane: HD-5 grade, used as auto gas/vehicle fuel
2. Butane: More common for cooking in warm climates like Port Harcourt

Common uses of LPG
Cooking (gas stoves and ovens)
Heating homes and water
Fuel for vehicles (often called autogas)
Industrial applications such as metal cutting and manufacturing
camping stoves, refrigerant, aerosol propellant.

Advantages
Burns cleaner than coal or wood
Produces high heat efficiently
Easy to store in cylinders or tanks
Portable and widely available

Safety
Because LPG is highly flammable:
Store cylinders upright.
Keep them away from heat sources.
Check regularly for leaks.
Ensure good ventilation when using LPG appliances.
LPG can not be put in a clear jar like diesel, it had just boil off instantly at atmospheric pressure. It needs a pressurized steel cylinder or cryogenic vessel to stay liquid.

Butane Gas is a high-quality liquefied petroleum gas widely used for industrial, commercial, and domestic applications. Known for its clean-burning properties and high calorific value, butane provides efficient energy for heating, cooking, aerosol propellants, lighters, and various industrial processes.

Our butane gas is carefully refined and supplied in compliance with international safety and quality standards, ensuring consistent performance and reliability for bulk and export markets.

Key Features:
High Calorific Value
Clean & Efficient Combustion
Low Sulfur Content
Reliable Performance
Suitable for Industrial & Commercial Use

Specifications:
Purity: As per buyer requirement (Commercial / High Purity)
Composition: n-Butane / Iso-Butane (as specified)
Sulfur Content: As per export standard
Packaging: Cylinders / ISO Tanks / Bulk Supply
Compliance: Meets International Safety Standards

Available in bulk shipment, cylinders, or ISO tanks as per buyer requirement. We ensure competitive pricing, secure packaging, and timely global delivery under agreed trade terms.

Brake parts cleaner is composed of aerosol can, aerosol valve, material liquid and propellant, which can effectively clean the dust and oil of brake parts, maintain the braking performance, and eliminate the noise generated during braking.

Features:

adhesive remover is composed of aerosol can, aerosol valve, paint liquid and propellant.
With a mild degumming formula, it can effectively dissolve the glue on the surface of the object to be removed, without corroding the surface of the object, and it can be easily removed by spraying and wiping.

Theaoson sticker remover is composed of aerosol can, aerosol valve, paint solution and propellant. This product uses mild remove formula, can effectively dissolve the surface colloid of the removed object, do not corrode the surface of the object, spray and wipe just once, easy to remove.

Brake parts cleaner is composed of aerosol can, aerosol valve, material liquid and propellant, which can effectively clean the dust and oil of brake parts, maintain the braking performance, and eliminate the noise generated during braking.

Features
Fast evaporation, no residue l Quick cleaning
No corrosion to base material l safety and eco-friendly

Application
Mainly used for cleaning brake parts of automobiles, motorcycles and bicycles.

Theaoson zinc coating spray is composed of aerosol can, aerosol valve, paint liquid and propellant. This product uses bright silver powder imported from Germany. The color of the paint film produced after use has the same high-gloss galvanized color as the galvanized parts, it has the same color as the galvanized color that fades with the exposure time, so that there is no color difference in the repaired part coated on the galvanized part.

Theaoson anti-rust agent is composed of aerosol can, aerosol valve, feed liquid and propellant. It contains special molecules to form a protective film on the surface of the material to effectively prevent the contact of moisture and other corrosive substances with the surface of the material, thereby avoiding metal. Oxidation causes corrosion, good penetration and penetration, infiltration of rust, dissolution of sticky materials, anti-rust, lubrication, loose embroidery and other functions.

Theaoson spray paint is composed of aerosol cans, aerosol valves, paints, and propellants. It is used in a wide range of applications: repair of paint enamels, molds, industrial machinery, buildings, steel structures, advertising, logos , graffiti and so on.

Features
High-gloss bright zinc

Color consistent with galvanized parts

Good atomization, easy to use

Application
It is suitable for color changing and anti-corrosion treatment of stainless steel, carbon steel, galvanized parts and other metal parts.

FEATURES
Carburetor cleaner is composed of aerosol can, aerosol valve, liquid material and propellant, which can effectively remove the deposits such as colloid, oil sludge, paint film, etc., restore the good state of the carburetor and enhance the combustion efficiency. Solve the problem of unstable engine idling and difficult starting.



APPLICATION
It is mainly used for cleaning carburetor, fuel injection nozzle, spark plug, throttle valve and other parts of automobiles and motorcycles. It can also be used for cleaning metal parts such as engine appearance and chain.

Features:

adhesive remover is composed of aerosol can, aerosol valve, paint liquid and propellant.
With a mild degumming formula, it can effectively dissolve the glue on the surface of the object to be removed, without corroding the surface of the object, and it can be easily removed by spraying and wiping.

Advantages:
Easy to remove glue, car and home dual-use, does not hurt objects, environmentally friendly formula
Product suitability
It is widely used in the removal of self-adhesives such as decoration templates, aluminum-plastic panels, metals, ceramics, glass, automotive paint and transparent adhesives in some rubbers.

Theaoson paint remover is composed of aerosol can, aerosol valve, paint liquid and propellant. It is a stripping paint remover with high-efficiency technology formula. It removes paint quickly and thoroughly, has strong removal ability, and is easy to use. It has a good effect on a variety of difficult-to-remove paint films. It is easy to clean after removing paint and does not affect repainting. It is especially suitable for the removal of self-drying alkyd paint, amino baking paint, partial epoxy, partial light curing and high temperature curing two-component paint film.

a. EN149-2001+A1-2009
b. Filtration Efficiency FFP2 >94%
c. scope of usageï¼?Absorbing the harmful aerosol, including dust, smoke, fog droplets, toxic gases and toxic vapors through filter materials, so as to obstruct bacteria and particles from being inhaled.

Theaoson spray paint is composed of aerosol cans, aerosol valves, paints, and propellants. It is used in a wide range of applications: repair of paint enamels, molds, industrial machinery, buildings, steel structures, advertising, logos , graffiti and so on.

Features
Fast drying Colorful and easy to use Full paint film and high gloss

Application
Suitable for metal, wood, clay bricks, glass, asbestos tiles, plastics, ceramics and other materials. Due to the diversity of materials during the specific construction, a small-scale test spray must be performed first, and no large-scale construction can be conducted after no adverse reactions.

EN149-2001 + A1- 2009

Key Index : Under Gas - Flow Rate 95L/min
Filteraation Efficiency FFP1_>80 %
FFP2>94%

Scope Of Application :
Absorbing the harmful aerosol, including dust, smoke, fog droplets, toxic gases and toxic vapors through filter materials, so as to obstrucy and particles from being inhaled

a. EN149-2001+A1-2009
b. Key Index ï¼?
- Gas-flow Rate under 95L/minï¼?Filtration Efficiency FFP2â?¥94%
- Inspiratory Resistance â?¤2.4mbar
c. Scope of Application ï¼?
Absorbing the harmful aerosol, including dust, smoke, fog droplets, toxic gases and toxic vapors through filter materials, so as to obstruct bacteria and particles from being inhaled.

46% zinc cold galvanizing is composed of aerosol cans, aerosol valves, paint liquids and propellants. It is widely used in the following fields: anti-corrosion and repair of metal parts such as outdoor, indoor, manufacturing, and transportation industries. , refurbished. Metal products such as iron, tin and other metals whose chemical reducibility is lower than that of zinc.

Features
1.Fast drying
2.Colorful and easy to use
3.Full paint film and high gloss
4.Strong adhesion

Application
It is suitable for metal, wood, clay bricks, glass, asbestos tiles, plastics, ceramics and other materials. Due to the diversity of materials during the specific construction, a small-scale test spray must be performed first, and no large-scale construction can be conducted after no adverse reactions

96% zinc cold galvanizing is composed of aerosol cans, aerosol valves, paint liquids and propellants. It is widely used in the following fields: anti-corrosion and repair of metal parts such as outdoor, indoor, manufacturing, and transportation industries. , refurbished. Metal products such as iron, tin and other metals whose chemical reducibility is lower than that of zinc.

Features
1.Fast drying
2.Colorful and easy to use
3.Full paint film and high gloss
4.Strong adhesion

Application
It is suitable for metal, wood, clay bricks, glass, asbestos tiles, plastics, ceramics and other materials. Due to the diversity of materials during the specific construction, a small-scale test spray must be performed first, and no large-scale construction can be conducted after no adverse reactions

Brothers Gas has recently put up a state of the art plant to supply high quality aerosol propellants. BAPG (Brothers Gas Aerosol Propellant) is a proven alternative for Chlorofluorocarbons (CFCs) which are proven hazards to the environment by depleting the earth's protective ozone layer. The LPG based Aerosol propellants are safe and environment friendly, apart from being economically. viable.

The Brothers Gas Aerosol Propellant Plant was commissioned recently. The Design is based on the latest international standards, thus the products obtained from it are free from Odor and also free from the corrosive Sulphur impurities. The plant is capable of removing any impurity detrimental to the Propellant Gas specifications. Brothers Gas has dedicated tanks, pipelines, tankers to ensure absolute purity of the product.

Some of the sectors served by APG

Perfumes
Pesticides
Food grade packaging material
Cosmetics
Paints
Air-fresheners
Polishes

Characteristics of Brothers Gas APG

Purity â?? Less than 1 ppm Sulphur.
Non-toxic / Non-corrosive.
Free from heavies and moisture, thus it leaves no marks of oily residue on evaporation.
Odor free the basic requirement for perfume & air-freshener manufacturers.
Available in custom made grades with different vapor pressures to suit the needs of different customers.

Theaoson spray paint is composed of aerosol cans, aerosol valves, paints, and propellants. It is used in a wide range of applications: repair of paint enamels, molds, industrial machinery, buildings, steel structures, advertising, logos , graffiti and so on.

Features
High-gloss bright zinc

Color consistent with galvanized parts

Good atomization, easy to use

Application
It is suitable for color changing and anti-corrosion treatment of stainless steel, carbon steel, galvanized parts and other metal parts.

Instructions:
Before use, you must shake up, down, left, and right, and continue to shake the can for about 1 minute after hearing the sound of glass to ensure that the paint liquid is fully mixed and even.

15 ~ 30cm away from the surface of the object to be sprayed, press the nozzle with the index finger to spray uniformly back and forth.

When a small amount of remaining liquid cannot be sprayed, please rotate the nozzle 180 �° and spray again.

If spraying is not finished one time, put the can upside down before storage, press the nozzle for about three seconds, and clean the nozzle to prevent plugging.