35Kv Continuous Busbar Heat Shrinkable Tube Suppliers and Manufacturers

Operating Temperature -30 to 125 Features 2:1 shrink ratio Very good chemical and solvent resistance Very flexible Excellent physical, electrical and flame-retardant performance

Green stripe heat shrinkable tube

Yellow & green heat shrinkable tube Colors : yellow/green

Item value Shrinking temperature start at 80oc Operating temperature -55ocf¼125oc Elongation strength fª200% Tensile strength fª10.4mpa Volume resistance ·+1014¬+/cm Dielectric trength fª15 kv/mm

All our Avocados are grown at 1,000-3,000m above sea level with maximum day temperatures of 28C & night temperatures of 12-15C. This is very different to product grown in Spain, Mexico, South America, New Zealand & Australia which grow mainly at Sea Level, and in very dry areas with a lot of heat. Our Avocados do not get stressed as they grow at high altitude. During the day the trees and the fruit grow, and at night they rest. As a result of this the fruit takes an extra one -two months to mature. This results in a superb Avocado with a strong colour, rich flavourand nice texture. Due to the rains we get twice a year around the Equator the trees grow naturally. There is need for additional irrigation during the dry season but not much water is used. This means our water footprint is also very low. At high altitude there are very few pests and diseases & the trees continue to grow and with minimal pest pressure so there is little to no chemicals sprayed. Our Frozen Avocados are harvested at optimal maturity, and then natural ripened. After this each avocado is handled, one by one, by our team of ladies who are skilled food handlers & have been trained on post-harvest Avocado processing, to prepare the halves, chunks and slices. Each piece of the Avocado is handled with a lot of care, and individually frozen at -35C to capture the essence of the fruit and not allow any damage.We can pack for consumers in 300gms / 500gms 1kg, 2kg or 5kg ziplockbags.

Heat-shrinkable identification marker sleeves are designed to meet the requirements of high- performance identification of wire and cable, tools, hoses and equipment. Made from reliable flame-retardant polyolefin with outstanding properties, sleeves can also be used as electrical insulation. Marks are permanent after printing. Features Flexible, highly flame-retardant. Sleeves meet the print performance requirements of SAE-AS81531. Markers can also provide insulation and strain relief. Marks are permanent after printing; mark performance improves after shrinking. Free of PCBs, PCPs, polybrominated biphenyls (PBBs), polybrominated biphenyl oxides and ethers (PBBOs, PBBEs and PBDEs) and toxic heavy metal compounds, which are classified as environmentally hazardous substances. Conform to European RoHS environmental directive.

We are a professional manufacturer of heat shrink tubing and have been doing business in this field for more than 10 years, with a good reputation and many regular customers all over the world. We can also accept any kind of customized heat shrink tubing type, as well as customized outer or inner packaging. This product is widely used for wire linking, insulation protection of solder joints, end treatment of wires, insulation protection of resistors and capacitors, marking and ending of wires, rust and corrosion prevention of metal tubes and rods, and antenna protection. Cut resistance, solvent resistance, oil resistance and chemical resistance, in line with the European ROHS environmental directive, UL, and military standards. We guarantee reasonable prices and satisfactory quality, making it a good fit for your own brand. We can offer: - Competitive prices - High quality products - Sample orders accepted - Secure payment and delivery worldwide - Free shipping for bulk orders For custom production and any questions, please feel free to contact! Looking forward to be your supplier in China and have a long term cooperation. Contact us:Mors

We are a professional manufacturer of heat shrink tubing and have been doing business in this field for more than 10 years, with a good reputation and many regular customers all over the world. We can also accept any kind of customized heat shrink tubing type, as well as customized outer or inner packaging. The outer layer is made of high-quality, soft cross-linked polyolefin material, and the inner layer is processed by hot-melt adhesive compound. The outer material has the advantages of insulation and anti-corrosion, wear resistance, etc., while the inner layer has the advantages of low melting point, waterproof, sealing and high adhesion. e variety of heat shrinkable dual-wall tubeï¼?such as Environment Friendly Flame Retardant Dual Wall Tube With Glue and High Temperature Flame Retardant Dual Wall Tube for Automotive Wiring and so on. Features. 1.3:1 shrinkage ratio, adaptable to irregular shape insulation and sealing. 2.Medium wall thickness, which improves mechanical protection strength while maintaining flexibility. 3.The adhesive layer can bond plastic, rubber and metal. 4.Starting shrinkage temperature of 70, complete shrinkage temperature of 125. 5. melting temperature of inner glue layer: 70-100 6.Working temperature range:-40-125 7.Standard color: Black (there are ten standard colors to customize) We guarantee reasonable prices and satisfactory quality, making it a good fit for your own brand. We can offer: - Competitive prices - High quality products - Sample orders accepted - Secure payment and delivery worldwide - Free shipping for bulk orders For custom production and any questions, please feel free to contact! Looking forward to be your supplier in China and have a long term cooperation. Contact us:Mors

Yellow green heat shrinkable tube is widely used for identification of ground wire in wire harness or cable, identification of special cable, generatrix or pipe, etc., as warning and identification - Heat shrinkable ratio: 2:1, 3:1 - Initial shrinkage temperature: â?¥70â?? - Complete shrinkage temperature: 125 - Operating temperature: -55 ~ 125 - Low smoke, soft and flame retardant - Environmental protection standard: RoHS - Standard color: yellow and green

Flame retardant heat shrinkable tubes are made of radiation crosslinked polyolefin materials with excellent physical, chemical and electrical properties. Their main functions are electrical insulation of connectors, anti rust and anti-corrosion of solder joints, mechanical protection and wiring harness. They are widely used in electronics, communication, automobile, ship, aircraft manufacturing and other fields Product features Heat shrinkable ratio: 2:1 High flame retardant and environmental protection shrinkage temperature 84   Final shrinkage temperature: 120 Service temperature: - 55 125 Standard colors: black, white, red, green, blue and other ten international standard colors

A German charity company, specializing in the production of $1 glasses, brings beautiful experiences to 150 million people in developing countries every year. The protective layer of the outer layer of the eyeglass frame is the use of SUNBOW bright PE heat shrinkable tube, so this German charity company praises our technological innovation and breakthroughs. There are various manufacturers of PE heat-shrinkable tubes on the market, but most manufacturers are flame-retardant PE heat-shrinkable tubes, because more than 90% of customers only purchase flame-retardant PE heat-shrinkable tubes. SUNBOW considers customers in all aspects. As long as there is customer demand in the market, SUNBOW will develop and produce. This kind of non-flame-retardant heat-shrinkable tube is generally bright in appearance. Because there are fewer contacts, many manufacturers are actually not very familiar with this type of product. When this charity company in Germany found our company for the first time, customers actually knew quite a lot about these products. I remember clearly that the inquiry sent by the customer directly said that it should be 100% pure PE material, not flame retardant, no glue, and the shrink ratio is 3:1, even the inner diameter, wall thickness tolerance and shrink size are all The list is very clear. At that time, I was also the first to contact this kind of product, because the non-flame-retardant heat-shrinkable tube usually only has a 2:1 shrink ratio, so I recommend the customer to the flame-retardant 3:1 heat shrink without glue tube. After the first sample was sent, the customer was not satisfied after the test, saying that the surface of the tube was not bright and it was flame retardant. So I sent the customer's request to the engineer and told me it was applied to the glasses frame. After in-depth research and development of the product, a 3:1 bright surface heat shrinkable tube was sampled. After receiving the samples and testing, the customers were very satisfied with the results. They had their first order, and many color tubes were added, and the number of orders was increasing. SUNBOW produces heat-shrinkable tubes of various materials, adheres to the four principles of "quality, cost, delivery and service", so that customers are satisfied with our products and services. In the same way, every technical requirement of the customer strives to surpass, so that the customer has unexpected surprises. Every time you get a satisfied product that is better than once, the customer will never give you up easily. During the seventeen years since SUNBOW opened the factory, it has accumulated a large number of loyal customers with satisfied products.

2:1 Halogen free flame-retardant heat shrinkable tube is made of eco-friendly cross-linking polyolefin material under irradiation.It has flexible,flame retardant,electrical insulation,welding point anticorrosion,also has passed UL,RoHS,Reach certifications for 300V and 600V.It is mainly used in electronics,telecommunication,automobiles,shipping and other manufacturing industries.Its working temperature is -55~125,shrink temperature is 84~120.

Operation temperature: -50 to +125 Celsuis. Security: used to protect switch systems up to 1kV and can reduce the distance to ground. Convenience for application: the continous length as supplied make the application more conveniently and economically. ZRG series products were recognized as jiangsu province high and new technical product in 2000, its product number:000500G0030N. Specification: 1.Tensile Strength: í¦12 Mpa 2.Ultimate Elongation: í¦400% 3.Tensile Strength After Aging(After 7 Days Air Oven at 158Celsuis): í¦10 Mpa 4.Elongation After Aging(After 7 Days Air Oven at 158Celsuis):í¦300% 5.Deformation Test(131Celsuis\1): í_25% 6.Heat Shock 250Celsuis: No Cracking 7.Conductor Corrosion(After 7 Days Air Oven at 158Celsuis): No Corrosion 8.Volume Resistivity: í¦1014 ª+.cm 9.Dielectric Strength: í¦25 Kv/mm 10.Dielectric Withstand After Aging(After 7 Days Air Oven at 158Celsuis): 2.5Kv\60sec. 11.Breakdown Voltage After Aging(After 7 Days Air Oven at 158Celsuis): í¦12 Kv 12.Cold Bend(-30Celsuis\1hr): No Cracking 13.Longitudinal Change(200Celsuis\3minute): +10% to -10% 14.Eccentricity: í_30% 15.Flammability: VW-1

General-purpose, flexible polyolefin heat shrink tubing suited for commercial applications where cost is a consideration. Insulation, wire bundling, and mechanical protection are all common applications. Buy Heat shrinkable tubes (Shrink Ratio 2:1) MINI Reels order online in that is used to insulate wires. Order best Heat Shrink Tubing