Glsun SFP28-25G-BX10U DFB 25.78Gbps SFP28 BiDi transceiver module is designed for use in 25Gb/s data rate over single-mode fiber for link length 10Km. The transceiver designs are optimized for high perform-ance and cost effective to supply customers the best solutions for 25Gb/s single lane optical links. Compatible Cisco Form Factor SFP28 Max Data Rate 25.78Gbps Wavelength TX1270nm/RX1330nm Max Cable Distance 10km Connector Simplex LC Transmitter Type DFB BiDi Extinction Ratio 3.5dB Media SMF Power Consumption
Glsun SFP28-25G-BX10D DFB 25.78Gbps SFP28 BiDi transceiver module is designed for use in 25Gb/s data rate over single-mode fiber for link length 10Km. The transceiver designs are optimized for high perform-ance and cost effective to supply customers the best solutions for 25Gb/s single lane optical links. Compatible Cisco Form Factor SFP28 Max Data Rate 25.78Gbps Wavelength TX1330nm/RX1270nm Max Cable Distance 10Km Connector Simplex LC Transmitter Type DFB BiDi Extinction Ratio 3.5dB Media SMF Power Consumption
GLsun SFP28-25G-LR single-mode transceiver is SFP28 transceiver module duplex optical data communications support up to 25.78Gb/s. It is with the SFP+ 20 pins connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. It has built-in clock data recovery (CDR). This module is designed for single-mode fiber and operates at a nominal wavelength of 1310nm. Compatible Cisco Form Factor SFP28 Max Data Rate 25.78Gbps Wavelength 1310nm Max Cable Distance 10km on 9/125um SMF Connector Duplex LC Transmitter Type DFB 1310nm Extinction Ratio 3.5dB Media SMF Power Consumption
GLsun SFP28-25G-SR 850 nm VCSEL 25.78Gbps SFP28 transceiver is designed for use in 25Gb/s data rate over multi-mode fiber for link length of 100m. These transceiver designs are optimized for high performance and cost-effective to supply customers with the best solutions for 25Gb/s single lane optical links. Compatible Cisco Form Factor SFP28 Max Data Rate 25.78Gbps Wavelength 850nm Max Cable Distance 70m on OM3 or 100m on OM4 Connector Duplex LC Transmitter Type 850nm VCSEL Extinction Ratio 2dB Media MMF Power Consumption
GLSUN's QSFP-40G-ER4-T02 is a Optical Transceiver designed for 40km optical communication applications. The design is compliant to 40GBASE-ER4 of the IEEE P802.3ba standard. The module converts 4 inputs channels (ch) of 10Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 CWDM channels signals, and converts them to 4 channel output electrical data. The central wavelengths of the 4 CWDM channels are 1271, 1291, 1311 and 1331 nm as members of the CWDM wavelength grid defined in ITU-T G694.2. It contains a duplex LC connector for the optical interface and a 148-pin connector for the electrical interface. To minimize the optical dispersion in the long-haul system, single-mode fiber (SMF) has to be applied in this module. The product is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP+ Multi-Source Agreement (MSA). It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. Compatible Cisco Form Factor QSFP+ Max Data Rate 44.6Gbps Wavelength 1310nm Max Cable Distance 40km Connector Duplex LC Transmitter Type DFB CWDM Extinction Ratio 5.5dB Media SMF Power Consumption
GLsun 40Gb/s QSFP+ PSM 10km Optical Transceiver is a four-channel, pluggable, parallel, fiber-optic QSFP+ transceiver for InfiniBand QDR/DDR/SDR, 10G/8G/4G/2G fiber channel. and SAS Applications. The QSFP full-duplex optical module offers 4 independent transmit and receive channels, each capable of 10.3Gbps operation for an aggregate data rate of 40Gbps 10km using single-mode fiber. These modules are designed to operate over single-mode fiber systems using 1310 nm DFB laser array. An optical fiber ribbon cable with an MPO/MTPTM connector can be plugged into the QSFP module receptacle. QSFP+ PSM LR4 is one kind of parallel transceiver that provides increased port density and total system cost savings. Compatible Cisco Form Factor QSFP+ Max Data Rate 11.2Gbps Wavelength 1310nm Max Cable Distance 10km at Single Mode Fiber Connector Single MPO Transmitter Type DFB Laser Array Extinction Ratio 3.5dB Media SMF Power Consumption
Cisco QSFP-40G-LR4 Optical Transceiver are designed for use in 40 Gigabit Ethernet links over single mode fiber. They are compliant with the QSFP+ MSA, and IEEE 802.3ba 40GBASE- LR4. Digital diagnostics functions are available via an I2C interface, as specified by the QSFP+ MSA. Compatible Cisco Form Factor QSFP+ Max Data Rate 11.3Gbps data rate per wavelength Wavelength 1310nm Max Cable Distance 10km link length Connector Duplex LC Transmitter Type DFB CWDM Extinction Ratio 3.5dB Media SMF Power Consumption
Product Features 4 WDM lanes MUX/DEMUX design 4 WDM channels are 1296, 1300, 1305 and 1309 nm Hot-pluggable CFP2 footprint RoHS compliant and Lead Free Up to 10Km link length Power dissipation
Features: Xaui electrical interface: 4 lanes @ 3.125gbit/s Hot z-pluggable Sc-duplex optical receptacle Mdio, dom support Cooled dwdm eml Apd photo-detector Operating case temperature: 0 to 70°c Compliant to ieee 802.3ae 10gbase-zr application Compliant to xenpak msa 3.0 Mechanical footprint: 4.76 x 1.42 x 0.46" Reference: Ieee 802.3ae as 10gbase-zr, xenpak msa release 3.0
Description sfp+ 6g optical transceiver brand new and 100%genuine advantage price 100% real shooting 1 year warranty rohs compliant Features data-rate of 6.144 gbps compliant with sfp msa and sff-8472 with duplex lc receptacle digital diagnostic monitoring: internal calibration or external calibration compatible with rohs +3.3v single power supply Applications cpri and obsai bbu to rru interface other optical transmission systems Part no. Package Wavelength Data rate Reach Output power(dbm) Sens(dbm) Connector Voltage Hpp316g-02d Sfp+ 1310nm 6.144g 2km -8¡¨¹pout¡¨¹-1 ¡¨¹-14 Lc 3.3v Hpp316g-l2d Sfp+ 1310nm 6.144g 20km -4¡¨¹pout¡¨¹1 ¡¨¹-14 Lc 3.3v Lead time For some parts, we have the stock and ship immediately.For the parts which need to produce, it will take 1-2 weeks to get the shippment ready. And if need to make by the required specification, it will take longer.This will be decided by the kind of the products. Box package
10/100/1000BASE-T Copper SFP Fiber Optic Transceiver We supply brand-new fiber optic transceivers 100% compatible with most switches like Cisco, 3COM, HP, Foundry, Nortel, D-Link, Extreme, Juniper, Finisar, etc, and have got the ISO9001-2000, UL, TUV, CE, FDA, FCC, RoHS and REACH certificates to ensure the quality of products. Please contact us to get detail data sheet. Features 1. Compact RJ-45 connector assembly, up to 1.25G bi-directional data links 2. Hot-pluggable SFP MSA footprint, RoHS, IEEE802.3, Bellcore TA-NWT-000983 compliant 3. Support intelligent auto-negotiation 1000 BASE-T operation in host systems with SERDES interface 4. 10/100/1000Mbps compliant in host systems with SGMII interface 5. Access to physical layer IC via 2-wire serial bus, +3.3/5V single power supply, lead Free 6. Low power dissipation (1.05 W typical), metal enclosure for lower EMI 7. Commercial operating temperature range: 0 8. Warranty: 3 years; 100% tested, samples available 9. OEM/ ODM available, products and labels customized Applications 1. Gigabit Ethernet, Fiber Channel, GPON, EPON, Point-to-Point, SONET/SDH Network 2. Switches/ Bridges/ Routers/ Servers, OADM, FTTD (Fiber-to-the-desktop) 3. Telecommunication and fiber optic data transmission networks 4. Wide Area Networks (WAN), Local Area Network (LAN), CCTV, CATV Network Custom Products CFP-40G, CFP-100G, QSFP+ 40G, QSFP+ 100G 10Gbps SFP+, DWDM SFP+, CWDM SFP+, BiDi WDM SFP+, SFP+ loopback 10Gbps XFP, DWDM XFP, CWDM XFP, BiDi WDM XFP, XFP loopback CSFP, CSFF, CSFP loopback SFP, BiDi SFP, Multirate DWDM SFP CWDM SFP, CWDM SFF, CWDM 1x9, CWDM GBIC Multirate SFP, Multi-rate WDM SFP 10G PON GPON SFP, ONU SFF, ONU SFP, ONU SFP GEPON SFP, ONU SFF, ONU SFP, ONU SFP 3G/HD SDI video SFP, SD SDI video SFP GBIC, WDM GBIC 1x9, SFF 2x5, SFF 2x10 modules TOSA, ROSA, BOSA RJ transceivers Transceivers with any level of customization Export Carton Packing
10g x2 transceiver Description: Poflink's x2 is a standardized factor for 10 gb/s fiber optic transponders that is used for data transfer rates 10.3 gb/s to 10.5 gb/s. It is protocol-specific: either 10g ethernet or 10g fibre channel versions are available. X2 transponders are used in datacom optical links only (not telecom), and they are smaller than old generation xenpak transponders. Its electrical interface to the host board is also standardized and is called xaui (4 x 3.125 gb/s). Poflink manufactures x2-10g-sr 300m, x2-10g-lr 10km, x2-10g-er 40km, x2-10g-zr 80km optical modules. All modules support digital optical monitoring (dom) function . Features: Hot pluggable x2 msa form factor Low total power consumption: Transmission distance 300m, 10km, 40km, 80 km Cooled 1550nm eml or uncooled directly modulated distributed feedback (dfb) Full duplex transmission mode Digital optics monitoring (dom) 10pcs/plastic box 0.1kg/pcs
10g xenpak transceiver Description: Poflink's xenpak is a standardized form factor for 10 gb/s fiber optic transponders that is used for data transfer rates from 10.3 gb/s to 10.5 gb/s. It is protocol-specific: either 10g ethernet or 10g fibre channel versions are available. Xenpak transponders are used in datacom optical links only (not telecom). Its electrical interface to the host board is also standardized and is called xaui (4 x 3.125 gb/s). Poflink offers the whole series of 10g xenpak, including: Xenpak 10gbase-sr 300m (mmf om3); Xenpak 10gbase-lr smf 10-20km; Xenpak 10gbase-er smf 40km; Xenpak 10gbase-zr smf 80km Features: Hot pluggable x2 msa form factor Low total power consumption Rohs-6 compliant (lead-free) Temperature range 0¡ãc to 70¡ãc Transmission distance 300m, 10km, 40km, 80 km Cooled 1550nm eml or uncooled directly modulated distributed feedback (dfb) Sc connector, single mode fiber Full duplex transmission mode Digital optics monitoring (dom) Power supply: +5.0 v, +3.3 v Xaui electrical interface 4 x 3.125 gb/s ethernet(ftlx1841e2) Management and control via mdio 2-wire bus De-latch Xenpak 10gbase-zr smf 80km 1pcs/plastic box, 0.2kg/pcs
1) Package: SFP; 2) Data Rate:1.25Gbps; 3) Distance: 550m; 4) Wavelength: 850nm; 5) Connector: Duplex LC; 6) Fiber Type: Multi-mode fiber(MMF); 7) Power Supply: 3.3 single power supply; 8) Operating temperature: -40 to 85 9) Certification: CE,FCC,ROHS; 10) Others: Compliant SFP MSA specification and SFF-8472,IEEE802.3Z. 11) Application:1000BASE-SR/SW,1.25G Ethernet.
1) Package:SFP+; 2) Data Rate:10Gbps; 3) Distance:300m; 4) Wavelength:850nm; 5) Connector:Duplex LC; 6) Fiber Type:Multi-mode fiber(MMF); 7) Power Supply:3.3 single power supply; 8) Operating temperature:0 to 70; 9) DDM: With Digital Diagnostic Monitor; 10) Others:Compliant with 10GBASE-SR standards,SFP+ MSA specification and IEEE 802.3AE. 11) Application:10GBASE-SR/SW,10G Ethernet.
Product Function Hot pluggable QSFP28 MSA form factor Up to 80km reach for G.652 SMF with transport white box Single +3.3V power supply Temperature Range 0 to 70�°C Transmitter: Cooled EML 2*27.5Gbaud/s DWDM TOSA Receiver: 2*27.5Gbaud/s Pin-PD ROSA 4*25G CAUI4 electrical interface Integrated SFEC with high coding gain PAM4 modulation format on 100GHz ITU DWDM wavelength grid compatible Dual CS adaptor Compatible with RoHS6
Optical transceiver.
Inner Communication System Optical Transceiver Introduction CA-D inner communication system can construct an optical transmission system by connecting with the equipment with some distance fiber; it can realize the function to transmit multi-channels audio and data signal in two-way via one fiber, extend the transmission distance of ClearCom and Drake brand inner communication system Features: 1. Support Clear-Com and Drake Brand Inner Communication System 2. Transmitting 8 channels audio and 8 channels control data in two-way via single fiber 3. 24bit digital codec 4. Single level transmission distance can be up to 100Km (standard configuration is 40Km) 5. Large audio dynamic scaleMax. input/output audio can be up to +18dBm 6. There are LED indicators on front for input/output audio signal, optical signal, status in the equipment, and power supply
Introduction Cybervision CGE series 3G-SDI+ Data Optical Transceiver consists of optical transmitter CGET and optical receiver CEGR, which can realize mixture transmission for profession video and standard data interface for one channel 3GSDI, dual channels 10/100m Ethernet signal and multi-channels RS485/RS422, the SDI supports the HD signal with bit rate 3Gb/s, 1.5Gb/s, and compatible with SD-SDI or ASI video signal. With multiple bit-rates cable equalizer at electric input of CGET, and built in distribution amplifier at CGER, it can output dual channels HD-SDI (main and standby). With incomparable accuracy, and the electro circuit which can reduce the signal jitter, the equipment can deal with distorted signal well, it can provide 100m automatic balance for 1485 Mbps, 250m for 270 Mbps. Features: 1. Meets all video standard of SMPTE 424M, support the 3G SDI video format with bit rate of 2.97 Gb/s or 2.97/1.001 Gb/s 2. Meets all video standard of SMPE 292M, support the HDSDI video format with bit rate of 1.485 Gb/s or 1.485/1.001 Gb/s 3. Meets all video standard of SMPTE 259M, support the SD-SDI video format with bit rate of 270 Mb/s 4. Meets the interface standard of DVB-ASI (270 Mb/s) and SMPTE 305M (SDTi) 5. Passed the test of SDI pathology 6. With automatically identifying SD/HD/3G bit rate, the identifying scale: 270Mb/s ~ 2.97Gb/s 7. With automatic equalizer at SDI input port, the input of 270 Mb/s can be up to 400m, 1.485Gb/s can be up to 140m, 2.97 Gb/s can be up to 120m (the testing cable is Belden 1694A) 8. Support two channels 10/100m Ethernet interface, the two ports have switching function 9. Support 4 channels RS485 or 2 channels RS422, every channel is independent. 10. The optic signal is 3 wavelength CWDM signal, the wavelength can be customized, the transmission distance can be up to 100KM.
Patch cord, used for linking equipment and components in fiber optic network Features: Single, multiple mode, simplex and duplex fiber patch cords are available Used for linking equipment and components in fiber optic network Fan-out cable
