0 0001G Analytical Density Scale Suppliers and Manufacturers

Virgin coconut oil is made from fresh coconut meat. The production embraces the removal of the bark, the elimination of the brown shell and washing. Then the white meat gets grounded (to obtain fine flakes) and dried. After drying the white meat goes true a screw press to extract the oil. The oil gets filtered afterwards to result in a clear oil. Ingredients Organic cold pressed coconut oil. COCONUT OIL, 100% natural, is a refined vegetable oil extracted from the dried coconut flesh of Cocos Nucifera (Coconut). COCONUT OIL is one of the vegetable oils that accumulate high levels of saturated fatty acids in the triacylglycerol fraction. COCONUT OIL contains approximately 50% of Lauric acid (saturated C12 chain). COCONUT OIL provides emollient properties and is great for moisturizing, that make it useful to be used in all cosmetic formulations. COCONUT OIL is specially indicated for lipstick, make up and soap makers. The saturated nature of COCONUT OIL provides resistance to rancidity and makes a very hard soap while at the same time producing a fluffy lather. Many cultures use coconut oil straight on their hair and skin for conditioning. PHYSICAL & CHEMICAL STANDARDS Colour 25mm cell on the lovibond colour Scale in Y+5R , not deeper than (0.9 Y+0.1R) Relative Density at 30 0C 0.920 Relative Index at 40 0C ND Moisture %( matter volatile at 105 0 C,max) 0.1 Insoluble Impurities % by mass,max < 0.02 Free fatty Acids,calculated as lauric acid % bymass,max 0.04 Iodine Value 6.4 Saponification Value >255 Unsaponifiable Matter % by mass,max

Gelatin is extracted from collagen and is a high molecular weight protein composed of *8 amino acids. Bovine hide , bones and fish scales are normally used for the production of the gelatin. Gelatin can absorb ***0 minutes of water and if heated, it enters a sol state. Upon cooling, it enters a gel state.It is widely used in many aspects. Food grade gelatin Food grade gelatin which contains *8 kinds of amino acids human need has many incomparable characteristics in foodstuff as food additive such as jelly, stabilizer, thickener, foamer, and swelling agent that is widely used in candy, ice cream, cake, and the production of all kinds of dairy and frozen food

Physical state and appearance: Colorless clear Liquid. (Oily liquid.) Practically Odorless. Taste: Practically Tasteless. Molecular Weight: 76.1g/mole Boiling Point: 188C (370.4F) Melting Point: -59C (-74.2F) Specific Gravity: 1.036 (Water = 1) Vapor Pressure:0 kPa (@ 20C) 0.08 mmHg at 20 C 0.129 mmHg at 25 C Vapor Density: 2.62 (Air = 1) Water/Oil Dist. Coeff.: The product is more soluble in water; log(oil/water) = -0.9 Dispersion Properties: See solubility in water, acetone Application: Its most important end use is in the production of unsaturated polyester resins that, in turn, go into items that effect our daily lives, like water tanks, or our leisure time, like sailing boats. It can also be used as plasticizer, surface active agent, emulsifying agent and demulsifying agent, mould inhibitor, antiseptic for fruit, ice inhibitor and moisture preserving agent.

Refined Sunflower Oil is one of the known oil product that helps in keeping the level of cholesterol low and even reduces the chances of heatstroke. This oil is very easy to use while cooking. Very less quantity of oil is needed to make food. With its non-sticky texture, it is light-weighted too. This oil is mainly used by the people who have heart related issues and care for their heart. We are concerned about the quality of products and thatâ??s why we make them available in a wide range of excellent quality cooking oil. Book your order now! Refined Sunflower Oil specification Actual Value Color Number, Mg Lodi 1-10 1-3 Acide� Value. Mg < 0.60 0.60 Peroxide Value,� 1â??2 0 Millimole/ Kg

Physical state and appearance: Colorless clear Liquid. (Oily liquid.) Practically Odorless. Taste: Practically Tasteless. Molecular Weight: 76.1g/mole Boiling Point: 188°C (370.4°F) Melting Point: -59°C (-74.2°F) Specific Gravity: 1.036 (Water = 1) Vapor Pressure:0 kPa (@ 20°C) 0.08 mmHg at 20 C 0.129 mmHg at 25 C Vapor Density: 2.62 (Air = 1) Water/Oil Dist. Coeff.: The product is more soluble in water; log(oil/water) = -0.9 Dispersion Properties: See solubility in water, acetone Application: Its most important end use is in the production of unsaturated polyester resins that, in turn, go into items that effect our daily lives, like water tanks, or our leisure time, like sailing boats. It can also be used as plasticizer, surface active agent, emulsifying agent and demulsifying agent, mould inhibitor, antiseptic for fruit, ice inhibitor and moisture preserving agent for tobacco. Packaging Details Mono Propylene Glycol MPG CAS: 57-55-6 Iron drums, 215kg/drum, 17.2 MT/20GP Flexitank: 22-23MT/ flexitank cost little

CHEMICAL CHARACTERISTICS: Free Fatty Acid: 0.1 - 0.15% max Peroxide Value: 1.0 - 2.0 meq/kg max Color (Lovibond): 12.0 - 15.0 Yellow / 1.5 - 2.0 Red Iodine Value (Wijs): 100 - 122 Moisture: 0.05 %max AOM: 20 hrs min Cold Test: 5.5 - 12 hrs min Refractive Index @ 40oC: 1.460 - 1.467 Specific Gravity @ 25oC: 0.914 - 0.920 Saponification Value: 182 - 193 Smoke Point: 460 - 530oF Flash Point: 610 - 640oF Fire Point: 670 - 690oF FATTY ACID PROPERTIES: C16:0 Palmitic 3.0 - 5.0% C16:1 Palmitoleic 0.2 - 0.3% C18:0 Stearic 1.0 - 3.0% C18:1 Oleic 56.0 - 76.0% C18:2 Linoleic 10.0 - 24.0% C18:3 Linolenic 4.0 - 13.0% C22:1 Erucic 0.2 - 1.8% FATTY ACID DISTRIBUTION: Saturated 4.3 - 7.4% Monosaturated 54.4 - 65.0% Polyunsaturated 27.2 - 37.0% CRUDE CANOLA/RAPESEED OIL SPECIFICATIONS: Free Fatty Acids (As OLEIC) Molecular Weight 282-Basis: BASE 1.00% MAX. 1.25% Moisture and Volatile Matter: 0.20% MAX. Density (Specific Weight) at 25 C and 4 C Min. 0.9180 Max. 0.9225 Flash Point: MORE THAN 121 (250 F) Saponification value Min. 188 Max. 198 Impurities (Insoluble in Petrol Ether): 0.10% MAX. Unsaponifiables Matter (test as per N.O.P.A.): Max. 1.50 pct. Sediment (Gardner Break Test): 0.10% MAX. Lecithin (expressed as Phosphorous): 0.02% MAX. Color Index (MG Iodine) (Lovibond Cell 1 inch): 50-60 Yellow and 5-6 Red. Refractive index at 20 degrees C: 1.505 to 1.512 Halphen reaction Negative Density (at 15�° C): 900-930kg/m3 Flash Point: 220�°C ( closed up, Pensky-Martens method) Calorific value: 35.000 kJ/kg Kinematic viscosity: 38 mm2/3 (40�°C) Coke deposit: 0.4 mass-% (Conradson procedure) Iodine value: 100-120g/100g Sulphur content: 20mg/kg Neutralizations number: 2,0mg KOH/g Phosphorus content: 15mg/kg Water content: 75mg/kg Ash: 0.01 mass%

EMSCULPT EMSCULPT is the only procedure that can help both women and men burn fat and build muscle. Dr. Busso was part of the BTL Aesthetics EMSCULPT development team and was the first physician in Thailand to offer this exciting new technology to patients. Particularly effective on the buttocks and abdomen, EMSCULPT uses High-Intensity Focused Electro-Magnetic (HIFEM) field technology to induce short bursts of powerful muscle contractions that lead to increased muscle density, decreased volume, better definition, and improved tone. Product Specifications : Max. Power : 200 Watts Output Frequency : 27.12 MHz Treatment Duration : 1 to 30 min Mode : Continuous Output Power : 0 W - 200 W Dimensions of Device : 22 in W x 39 in H x 22 in D Weight of Device : 84 lbs Graphic Color Touch Screen : 8.4", 640x480 pixels Dimensions of Applicator without Cable : 27 in W x 7.6 in H x 4.1 in Weight of Applicator : 3.9 lbs KEY FEATURES : Builds muscle Burns fat Together! Non-invasive buttock lifting procedure No surgery No anaesthesia Suitable for everyone only a 30 minute walk in walk out procedure Only 4 session needed 2-3 days apart Feels like an intensive workout No downtime Instant results but gets better after two to four weeks 16% average increase in muscle mass 19% on average fat reduction Full Package : -Machine -Applicators -Intruction For Use -Emsculpt accessories -Training Materials -Patient Video Loop

Explore the robust and versatile HDPE (high-density polyethylene) Plastic Scrap offerings. Our collection includes a diverse array of HDPE options tailored to meet your specific requirements. Each HDPE variant undergoes meticulous sourcing and rigorous quality assurance processes to ensure reliability and performance. Trust Gremlog Trading DMCC to deliver premium-grade HDPE Plasticscrap, facilitating sustainable solutions and contributing to a circular economy. We offer the following products: HDPE Injection Mix/ 1-10ltr Black Gallons/ HDPE Milk Bottle/ 20ltr Mix Jerry Can/ 1-10ltr/ 20ltr Blue&White. Our plastic is in the range of 0-19mm and it is not washed or chemically treated.

In its mineral form Bauxite, Aluminium is the most abundant metal in the earth's crust. Bauxite contains one of a variety of hydrated aluminium oxides (gibbsite, boehmite or diaspore), which are often expressed as Al2O3xH2O but are more commonly regarded as impure Al2O3. Bauxite is claylike and earthy, and ranges in colour from white to deep brown or red according to the nature and quantity of its components. The major impurities in Bauxite are iron oxides (goethite & hematite), silicon dioxide, the clay mineral kaolinite as well as small amounts of anatase (TiO2). Consequently, its composition varies considerably with alumina constituting from about 50% to about 70%. Aluminium content can be accurately and precisely determined over a broad analytical range simultaneously along with Si, Fe, Mn, Ti, Zr and up to 20+ other elements. Item Specification Color: Brown, yellow / light red Granularity: 0-1/1-3/3-5/5-8 mm, 200/325 mesh Application: Aluminium/Precision Casting/Refractory Density: 4.3 g/cm3 Hardness: 1-3 Fe2O3 Content: 3.0% Max CaO Content: 0.2 Max Package: 25 kg/bag Payment terms: T/T L/C

Product Name Propylene Carbonate Type Chemicals Origin China CAS No 108327 Packing 1200kg IBC drum 250kg drum Items Standard Appearance colourless or light yellow liquid Main content 997 Moisture 01 Relative density 120005 gcm3 ColourHazen scale 20 Bromide content 01

Product Name Propylene Carbonate Type Chemicals Origin China CAS No 108327 Packing 1200kg IBC drum 250kg drum Items Standard Appearance colourless or light yellow liquid Main content 997 Moisture 01 Relative density 120005 gcm3 ColourHazen scale 20 Bromide content 01

Product Name: 1,2-Pentanediol Type: Cosmetic raw materials Origin: China CAS No.: 5343-92-0 AUCO No.: 451 Packing: 200kg drum Items Standard Appearance Colorless transparent liquid Purity, % 99 Moisture, % 0.2 Density(G/ML) 0.971

Product Name: Magnesium L-Threonate Type: Food Additives Origin: China CAS No.: 778571-57-6 AUCO No.: 424 Packing: 25kg/drum Items Standard Appearance The product is white fine granular powder, odorless and tasteless. Identification Add ammonia-ammonium chloride buffer to the aqueoussolution, add chromium black T Reagent, generate thewine red; then add EDTA,generate the pure blue. Clarity Take 0.lg of this product, dissolve in water to 10ml, shake and observe whether the solution is clear. Assay (on thedried basis) 98.0%~102.0% Mg2 7.2%~8.3% Water 1.0% NH 6.0~8.0 Density (Tap density) 0.6g/mL Density (Bulk density)0.4g/mL Heavy metal (As) 0.06ppm Heavy metal (Pb) 0.02ppm Heavy metal (Hg) 0.25ppm Micro-Organism (Total Bacteria Count) 1000CFU/g Micro-Organism (E.Coli) 40MPN/100g Micro-Organism (Yeast&Mold) 25CFU/g Micro-Organism (Pathogenic bacteria) Negative

Product Name: Diammonium Phosphate (DAP) "Type: Food Additives Origin: China CAS No.: 7783-28-0 AUCO No.: 300 Packing: 25kg bag" Items Standard Main content (NH4) 2HPO4 99% P2O5 Phosphorus Pentoxide 53% Nitrogen, as N 20.8% Moisture 0.1% Heavy metals, as Pb 0.001% SO4 0.5% Arsenic, as As 0.0003% Fluoride 10 ppm Water insoluble 0.10% PH (1% water solution) 7.8-8.2 Na2O 0.001% K2O 0.01% Density 20--40 mesh Insoluble matter NIL Any foreign particle NIL