ULTRA-LOW SULPHUR Diesel EN590 Discount: Spot - 35$ 12-month contract - 45$ Origin: QATAR QUALITY: Established by the International Standards (SGS). Specification: Standard Form of Packing : As Per Buyers Request Minimum Order : Qty: 20.000 Metric Tonnes Production Capacity: 1000000 Delivery Time : 20 - 30 days. Shipping Terms FOB or CIF ASWP PORT : RAS LAFFAN/HAMAD/ROTTERDAM. FOB PRICE USD : $ Inspection: SGS or Equivalent CiF PRICE USD : $ COMMISSION CHARGED. NO ,TTM/FTF ULTRA-LOW SULPHUR DIESEL EN590 Diesel EN590 Since 2007, diesel that conforms to EN590 has been referred to as Ultra Low Sulphur Diesel (ULSD) in the European Union. The phrase �¢??Ultra Low Sulphur Diesel�¢?? is governed by different standards in other parts of the world. The EN 590 had been introduced along with the European emission standards. With each of its revisions the EN 590 had been adapted to lower the sulphur content of diesel fuel �¢?? since 2007 this is called ultra low sulphur diesel as the former function of sulphur as a lubricant is absent (and needs to be replaced by additives). Automobile diesel en 590 is intended for application in diesel engines. Diesel motor fuel quality meets the requirements of European Standard EN 590. For operation in the conditions of a temperate climate following marks of fuel diesel automobile EN590 are offered: �¢?�¢ Grade A �¢?? limiting filterability temperature +5; �¢?�¢ Grade B �¢?? limiting filterability temperature 0; �¢?�¢ Grade C �¢?? limiting filterability temperature �¢??5 �?�°C; �¢?�¢ Grade D �¢?? limiting filterability temperature �¢??10 �?�°C; �¢?�¢ Grade E �¢?? limiting filterability temperature �¢??15 �?�°C; �¢?�¢ Grade F �¢?? limiting filterability temperature �¢??20 �?�°C. The entire volume of produced diesel fuel quality meets the requirements for fuels for vehicles of Euro 4 and Euro 5. Low sulfur content reduces emissions of sulfur oxides into the atmosphere, which is especially important for inhabitants of big cities.
Cetane Number, min. Cetane Index, min. Density at 15�°C, kg/m' Polycyclic aromatic hydrocarbons, wt. %, max. Sulphur, wt. %, mg/kg, max, for fuel K5 Flash Point in closed cup, �°C, higher than CCR of 10 % residue, wt. %, max. Ash, wt. %, max. Water, wt. %, mg/kg, max. Total impurities, mg/kg, max. Copper corrosion test (3 hours at 50�°C), scale unit Oxidation stability: total residues, g/m', max Lubricating property: normalized wear scar diameter (wsd 1,4) at 60�°C, um, max. Kinematic viscosity at 40�°C, mm'/ Distillation: at 250�°C, vol.%, less than at 350�°C, vol.%, min. 95% (vol.) distilled at temperature, �°C, not higher than Cold filter plugging point, �°C, not higher than 51 8 10 55 460 360 Specified Value TU 38.101567-2014 11.4 61 minus 10 1.0 (Il type) 1.5 (III type) 0.025 traces 0.2 absence 0.01 0.02 890 20 Specified value GOST 32511-2013 (EH 590:2009) 51.0 46.0 820.0 - 845.0 8.0 10.0 55 0.3 0.01 200 24 Class 1 25 460 2.000 - 4.500 65 85 360 minus 5
Product description, including the following details - a. Name of product: Copper Cathode b. Price of product: TBD c. Product Origin: China d. Key Specifications/Special Features: DIMENSIONS: Per Pallet Weight 1 Metric Ton +/- 1% 1000mm x 1000mm x 12mm (appr.) (39â?? x 39â?? x 0.5) (We can customize according to the Buyer's request) Elements/Unit Value Elements/Unit Value Copper (Cu), % 99.92% - 99.99% Silica (Si), PPM 0.3 Cobalt (Co), PPM 0.2 Bismuth (Bi), PPM 0.1 Lead (Pb), PPM 0.2 Tellurium (Te), PPM 0.05 Iron (Fe), PPM 2 Silver (Ag), PPM 10 Aluminum (Al), PPM 0.5 Selenium (Se), PPM 0.3 Manganese (Mn), PPM 0.1 Sulphur (S), PPM 4.0 Nickel (Ni), PPM 0.2 Magnesium (Mg), PPM 0.4 Antimony (Sb), PPM 0.1 Zinc (Zn), PPM 0.4 Arsenic (As), PPM 0.1 Oxygen (O), PPM Nil e. Harmonization System (HS) Code: 7413111101 f. Minimum Order Size: One 40-Foot Container g. Packaging Details: Outer Packing by Pallet secured with Steel Straps/Tapes. (we can customize it according to the Buyer's request). MODE OF PAYMENT: 20% T/T in advance & 80% L/C of goods after SGS inspection results within 5-7 banking days. FOB or CIF
1. Product images: Below 2. Product description, including the following details - a. Name of product: Copper Wire b. Price of product: TBD c. Product Origin: China d. Key Specifications/Special Features: DIMENSIONS: Per Woven Bag Weight 1 Metric Ton +/- 1% (We can customize according to the Buyer's request) Elements/Unit Value Elements/Unit Value Copper (Cu), % 99.92% - 99.99% Silica (Si), PPM 0.3 Cobalt (Co), PPM 0.2 Bismuth (Bi), PPM 0.1 Lead (Pb), PPM 0.2 Tellurium (Te), PPM 0.05 Iron (Fe), PPM 2 Silver (Ag), PPM 10 Aluminum (Al), PPM 0.5 Selenium (Se), PPM 0.3 Manganese (Mn), PPM 0.1 Sulphur (S), PPM 4.0 Nickel (Ni), PPM 0.2 Magnesium (Mg), PPM 0.4 Antimony (Sb), PPM 0.1 Zinc (Zn), PPM 0.4 Arsenic (As), PPM 0.1 Oxygen (O), PPM Nil e. Harmonization System (HS) Code: 7404000010 f. Minimum Order Size: One 40-Foot Container g. Packaging Details: Inner Packing by Plastic Wrap, Outer Packing by Woven Bag secured with Steel Straps/Tapes. (we can customize it according to the Buyer's request). MODE OF PAYMENT: 20% T/T in advance & 80% L/C of goods after SGS inspection results within 5-7 banking days. FOB or CIF
Light Crude Oil (LCO) Eastern Siberian Pacific Icean (ESPO) Low Sulphur Oil (Class 1) Quality Specification : 1. Density @ Temperature 20oC (kg/m3) GOST 3900, GOST R51069 : 843, 850 2. Specific Gravity @ 60/60oF (kg/m3) ASTM D5002 : 8512 3. API Gravity (kg/m3) ASTM D1250 : 34 4. Mass fraction of water (%mass) according to GOST 2477 : 0.12 5. Mass fraction of sulfur (%mass) according to GOST1437, GOST R 51947 : 0.5 6. Mass concentration of chloride salts (mg/dm3) GOST 21534 : 24.9 7. Mass fraction of mechanical impurities (%mass) GOST 6370 : 0.007 8. Ash content (%mass) GOST 1461 : 0.01 9. Mass fraction of water (mg/kg) ISO 12937 : 55 10. Pour point (oC) ASTM D5853 : MEHEE - 36 11. Mass fraction of paraffin (%mass) GOST D11851 : 2.1 12. Fraction yield, up to temperature GOST T2177 200 degrees C (%) : 27 300 degrees C (%) : 47 13. Saturated vapor pressure kPa (mmHg) GOST 1756, GOST R 523401 : (66.7) 387 14. Kinematic viscosity @ 20oc (Cst) ASTM D445 : 6.949 15. Mass fraction of organic chlorides in the fraction up to 204oC (ppm) GOST R 52247 : 10 16. Mass fraction of hydrogen sulfur (ppm) GOST R 50802 : absent 17. Mass fraction of methyl and ethyl mercaptans in total (ppm) GOST R 50802 : absent HS Code of the EAEU : 2710 12 410 0 Min: 500,000 Barrel Max: 5,000,000 Barrel Quantity: 500,000 Barrel per Monthly x 12 months Payment : DLC MT700 / SBLC MT760 within 7 banking days and 2%PB Origin: Russian / Non-Russian CIF Price: $32.00 Gross / $30.00 Net FOB Price: $26.00 Gross / $24.00 Net Commission: $5.00 buyer side / Barrel Expire date: 31/12/2023
Poptan BFR Physical Appearance: A fine creamish white powder based on special compounds having 96% active contents. Applications: Poptan BFR is an alkaline powder with very fine particle size. It is uniformly but sparingly soluble in acid solutions. So it is an extraordinarily excellent self basifying agent for chrome tannages as its addition to chrome tan bath increases the pH very gradually which can be controlled by the amount added. So it offers a completely safe method for controlling the basicity of chrome tannage thus totally avoiding regular and close supervision required in case of other common alkalis used for basification. It is added soon after the penetration of chrome. An addition of 0.3-0.5% Poptan BFR on pelt weight is sufficient for normal pickle-chrome tan process although minor adjustments in pickle acid and amount of Poptan BFR for correct balance may be required. However, once this is obtained the process can be allowed to proceed safely with very little control for 6 hours to get the required pH level and boil test. Advantages : Poptan BFR regulates a gradual increase in pH without initial rapid increase normally observed with sodium carbonate or sodium bicarbonate etc., leading to perfect and levelled chrome distribution throughout the cross section of collagen and a smooth and light coloured grain. Its fine particle size totally eliminates the risk of abrasion to the pelt and ensures best results. Poptan BFR reacts with sulphuric acid to give only soluble salts. Alkalis based on calcium when used lead to formation of insoluble calcium sulphate in the pelt, which has a detrimental effect on the dyeing and can result in white stains on dyed leather. Storage: Can be stored under normal conditions and has an indefinite shelf life. Some cake formation may occur if it is stored in warm and humid conditions, but this does not affect its chemical activity.
Crude Oil Specifications: Basic Analysis -- Density (kg/m^3) Most Recent Sample 922.6 6 Month Average 925.7 1 Year Average 927.3 5 Year Average 924.9 Gravity (oAPI) Most Recent Sample 21.7 6 Month Average 21.2 1 Year Average 21.0 5 Year Average 21.4 Sulphur (wt%) Most Recent Sample 3.52 6 Month Average 3.60 1 Year Average 3.63 5 Year Average 3.81 MCR (wt%) Most Recent Sample 10.00 6 Month Average 9.60 1 Year Average 9.74 5 Year Average 9.91 Sediment (ppmw) Most Recent Sample 174 6 Month Average 186 1 Year Average 184 5 Year Average 186 TAN (mgKOH/g) Most Recent Sample 1.88 6 Month Average 2.22 1 Year Average 2.24 5 Year Average 2.40 Salt (ptb) Most Recent Sample 3.5 6 Month Average 6.4 1 Year Average 5.8 5 Year Average 6.0 Nickel (mg/kg) Most Recent Sample 62.0 6 Month Average 58.7 1 Year Average 58.8 5 Year Average 59.8 Vanadium(mg/kg) Most Recent Sample 155.0 6 Month Average 148.3 1 Year Average 150.0 5 Year Average 158.0 *All Specifications of North American Origin
Technology Brief Based on the principle of VPSA technology, the VPSA-O2 units adopt the special adsorbent (model: PU-8) to enrich the oxygen in the air and supply it to the user. Production Capacity 1000Nm3/h~40000 Nm3/h, Converted to liquid oxygen: 34 TPD~1360 TPD Typical Applications > Steel: Blast furnace oxygen-rich coal injection, electric furnace steelmaking > Non-ferrous metallurgy: combustion-supporting for non-ferrous metals metallurgy including copper, lead, nickel, zinc, tin and gold. > Chemical: gasification furnace oxygen-rich gas making, carbon black production, sulphur trioxide production etc. > Kiln energy-saving: combustion supporting for glass kilns, cement kilns and oxygen-rich combustion supporting for waste incinerators > Papermaking: pulp bleaching process > Sewage treatment: OEAA technology, oxygen source for ozonizer Technical Advantages 1. Experienced engineering PKU PIONEER has built the most VPSA-O2 plants in China, including the world's largest VPSA-O2 plant. 2. Excellent energy consumption Energy consumption of PKU PIONEER's VPSA-O2 plant is 0.29-0.32kWh/m3 O2, which is among the lowest, around the world. 3. Internationally-leading process design PKU PIONEER has built up the first set of radial bed in China. Independently-developed five-bed, air intake and other original process designs have proved obvious advantages. 4. The independently-developed lithium-based adsorbent PKU PIONEER's independently-developed and produced lithium-based VPSA-O2 adsorbent PU-8 is featured by high selectivity and high working capacity of nitrogen, which is among the best around the world. 5. Mature and reliable system running The long-term engineering practice has proved that PKU PIONEER's VPSA-O2 plants are stable and the supplementary devices are mature and reliable, thus ensuring the continuous production for users.
Copper Cathode we can provide inside bonded warehouse in Zambia at 7% discount on LME. No instrument required. Inspection from Alex Stuart and pay. PHYSICAL DIMENSION: Dimension: 914mm x 914mm x 12mm (LME standards). Weight of each sheet 125kg (+-1%) Net Weight of each pallet: 2MT ((+-1%) Minimum weight in each container: 22.6MT approx. Gross Weight of each container 22.6 MT approx. Size of each sheet: 36 x36 x 0.5 CHEMICAL SPECIFICATIONS: Copper (Cu): 99.97% - 99.99%: Cobalt (Co): 0.2 ppm maxi; Lead (Pb): 0.2 ppm max; Iron (Fe): 2ppm max; Aluminum( Al):0.5ppm max; Manganese(Mn)0.2ppm max; Nickel(Ni): 0.2 ppm max; Antimony (Sb):0.1 ppm max; Arsenic (As):0.1 ppm max; Silica (Si)0.3ppm max; Bismuth (Bi): 0.1 ppm max; Tellurium (Te): 0.05 ppm max; Selenium (Se): 0.1 ppm max; Sulphur(S): 4ppm max; Magnesium (Mg): 0.4 ppm max. Offer: 20,000mT CIF to most destinations, 18% minus LME (Inc commission for brokers) 2% PB given on LC. 10,000mT CIF to most destinations, 17% minus LME (Inc Commission for brokers) 2% PB given on LC. 5,000mT CIF to most destinations, 13% minus LME (Inc Commission for brokers) 2% PB given on LC. 5,000mT CIF to most destinations, 15% minus LME (Inc Commission for brokers) No PB given on LC. Need LC from AAA rated bank. We are able to accept release of funds from LC after delivery and inspection at destination port. LOI, SPA, LC, PB to activate LC. Shipment, Close.
Product Description : Crude Pure Rapeseed Oil Price of product ( USD price or FOB price) : need to be discussed Product origin : South American origin Key Specifications/Special Features : Ffa: Basis 2.0 %, Max 3.0 % Iodone Value-wijs Metode 110-125 Saponification Value 185-195 Unsaponifiable Matters 0.5 % Max Acidity Max 2% Moisture Max 1.2 % Insoluble Matter 0,1% Viscosity At 50 C Mm 30-35 Specific Gravity At 50 C G/cm2 0,90-0,91 Specific Gravity At 20 C G/cm2 0,91-0,91 Solidification Point C 10-15 Lecithine Expr. As Phosphorus Ppm 30 Phosphorous 4 Ppm Max Sulphure Mg 20 Palmatic Acid C 16/0 2,5-6,0 Lioleic Ac Id C 18/0 0,9-2,1 Lioleic Acid C 18/1 50-66 Lioleic Acid C 18/2 18-30 Lioleic Acid C 18/3 6,0-14,0 Behanic Acid C 22/1 0-0,5 Euric Acid C 22/1 0-2,0 Physiological Nutritional V.kj/100g Ca .33,660 Flasch Point C 121 REMARK: If for some buyer above specifications are unacceptable, we might be able to adjust them according to their especial requirement depending on crop and origin Minimum Order Size and Packaging details : Packing : Flexibags or bulk, Minimum order Quantity 800MT or other packing need to be discussed
DESCRIPTION * TARGET EP GEAR OIL GL-5 oils are designed for use in industrial and automotive gearboxes and general lubricating systems. These are multi-purpose extreme pressure sulphur based oils with EP additives, blended with special inhibitors to increase aging stability and anti-corrosion properties. TARGET EP GEAR OIL GL-5 gear oils have a high persistence to break down under mechanical loads and help minimize wear under heavy and shock load conditions. APPLICATIONS Suitable for manual transmissions, transaxles in automotive gears, particularly hypoid gears in passenger cars. Suitable for all equipment operated under high speed/low torque and low speed/high toque conditions. Ideal for gear sets on tractors and agricultural equipment, track rollers of crawler tractors and a variety of industrial applications. PERFORMANCE STANDARDS API GL-5 SAE 85W140, 80W90 US MIL L-2105D BENEFITS TARGET EP GEAR OIL GL-5 oils exhibit excellent resistance to aging and oxidation, thus prolonging service intervals. They provide excellent protection against corrosion of steel as well as non-ferrous metals and possess superb anti-wear properties. They also offer excellent shear stability as well as provide rapid air release. These gear oils have good demulsifying properties and offer increased lubricant life. Minimum Order Size : order size must be one container Packaging details - flexi bag, bottles
TARGET EP GEAR OIL GL-5 oils are designed for use in industrial and automotive gearboxes and general lubricating systems. These are multi-purpose extreme pressure sulphur based oils with EP additives, blended with special inhibitors to increase aging stability and anti-corrosion properties. TARGET EP GEAR OIL GL-5 gear oils have a high persistence to break down under mechanical loads and help minimize wear under heavy and shock load conditions. APPLICATIONS Suitable for manual transmissions, transaxles in automotive gears, particularly hypoid gears in passenger cars. Suitable for all equipment operated under high speed/low torque and low speed/high toque conditions. Ideal for gear sets on tractors and agricultural equipment, track rollers of crawler tractors and a variety of industrial applications. PERFORMANCE STANDARDS API GL-5 SAE 85W140, 80W90 US MIL L-2105D BENEFITS TARGET EP GEAR OIL GL-5 oils exhibit excellent resistance to aging and oxidation, thus prolonging service intervals. They provide excellent protection against corrosion of steel as well as non-ferrous metals and possess superb anti-wear properties. They also offer excellent shear stability as well as provide rapid air release. These gear oils have good demulsifying properties and offer increased lubricant life Minimum Order Size : order size must be one container Packaging details - flexi bag, bottles
TYPICAL PROPERTIES Sr. Property Units Specs. Test Methods 1 Kinematic Viscosity @ 100 C cSt 2.5 - 2.8 ASTM D-445 2 Kinematic Viscosity @ 40 C cSt 6.0 -9.0 ASTM D-445 3 Density @ 15 C Kg/m3 830-840 ASTM D-7042 4 Flash Point, ,COC, Min. C 140 ASTM D-92 5 Sulphur Content, Max. ppm wt.% 15 ASTM D-4294 6 Color- Max - 1.0 ASTM D-1500 7 Appearance - C & B Visual 8 Distillation Range, IBP, Min. C 250 ASTM D-86 9 Distillation Range, FBP, Min. C 380 ASTM D-86 Base oil SN50, the base stocks has become the most widely used base oil in Middle East and Asia. It is the workhouse ingredient for formulators and blenders of lubricants for passengers and commercial vehicles, as well as industrials applications. Applications : superior quality component for automotive and industrial applications. Safety & Handling: It is stable in ambient conditions, non-corrosive and it can be stored in mild steel containers. The product is practically non-irritating to skin and eyes. Packing: Bulk, IBC Tank, Flexi Tank, New and Re-Conditioned Drums. Features and benefits: * Consistency in formulation * Market general packages with a range of additives * Superior supply chain / delivery logistics
low price best quality ICUMSA Sugar, Competitive price Icumsa Sugar 45 icumsa 45 is a highly refined sugar, and it is easily recognizable by its distinctive sparkling white color and pure sucrose taste. it is suitable for human consumption and use in a wide range of food applications. it is perpetually in high demand as it is the safest form of sugar, due to the fact that the refining process by which it is created removes the bacteria and contaminants often present in raw sugars. icumsa 45 is the world's leading consumer sugar. white sugar, refined white sugar, crystal white sugar 1. high quality with best price 2. factory supply 3. prompt shipment white sugar, refined white crystal sugar with best price product name: white sugar purity: 99.80%min type: refined white crystal sugar shelf life: 2 years white sugar icumsa 45 product description : - polarization : 99.80 degrees min - ash content : 0.08 max. - icumsa :45 rbu max. ( s.g.s.scale ). - solubility : 100% dry and free flowing - colour : sparkling white.maximum 45 icumsa attenuation index units (icumsa method no:4-1978). - radiation : within internationally accepted limits - granulation : fine crystal - moisture : 0.8% max. - magnetic particles : 4 mg/k - so2 : 70 mg/k - ash by electrical conductivity : 0.04% max.(on dry weight basis) - sulphur dioxide : 20 mg/kg min. - sediments : none. - free of any smell. - reducing sugar : 0.05% max by weight. - hpn staph aureus : nil. - max as : 1 p.p.m .
Product Name Native Potato starch Grade Food grade, Country of Origin INDIA Final Description Potato starch is produced in mechanical process of separating starch from whole potatoes and drying process. It is intended for application purpose in food and pharma. Organoleptic Requirement Apperance Texture Free flowing fine powder Colour Pure White, Approx 94% whiteness Aroma Typical, no foreign aroma Flavour Typical, no foreign flavour Viscosity Minimum 1280BU Physical Chemical requirement Moisture content not more than 20%(M/M) Ph Content 5 to 8 ph Ash content no more than 0.25% Particle size 100% below 150 �¼m Sulphur Di oxide content No more than 10mg/Kg Metal Content Arsenic No more than .10mg/kg Cadnium No more than .10mg/kg Lead No more than .10mg/kg mercury No more than .05mg/kg Microbiological Requirement Total Plate Count No more than 1000 in 1g Total Yeast count No more than 100 in 1 g Total Mould count No more than 500 in 1g Escherichia Coli Absent in 1g Salmonella Bacteria Absence in 25 g Other Requirement List of Ingredient ONLY Potato Starch Packaging Type 25 kg HDPE with food grade Liner of 250 micron Storage Condition Keep in dry place, DRY FRESH & AIRY ROOM, FREE from foreign Scents Best by Date Potato starch is stored in original packaging in conditions complaint with specifications retain its qualities for the period of 2 years. Batch Number Identified by the date and shift designation must be labelled on bags. Transport Requirement Use clean and dry mode of transport that will protect the packaging against damage and getting wet. The product is not classified as hazardous and does not required high safety mode of transport.
Petroleum refining is characterized by the largest amount of systems exposed to corrosion compared to any other sector of the oil industry. Corrosion problems occur everywhere, from the points of raw materials delivery up to removal and transportation of the refined products. Corrosion control measures shall be taken at crude oil distillation plants and units for alkali treatment of oil, gas plants, reformer and cracking units, straight run deisobutanizers, units for adsorption of hydrogen sulphide from aqueous solutions, furfural treatment units etc. Liquid composition may vary depending on a particular stage of the oil refining cycle – from sulphurous, acid oil-water mixtures fed to refineries to final products (e.g., gasoline) with negligible water content. It is hardly possible to use any “universal” corrosion inhibitor due to the variety of process mechanisms that may cause intense corrosion of equipment used in the oil sector. The need to ensure property package determining processability and compatibility of the inhibitor with corrosion medium components necessitates development of an inhibitor that would be functional in different corrosive conditions. Oilfield water containing large amounts of chloride ions, oxygen, carbon dioxide and hydrogen causes and promotes further development of local electrochemical processes, which represent the most dangerous type of corrosion and failure of metal. Oilfield practice shows that the most dangerous local corrosion damages also occur in the presence of microorganisms. In order to protect oil equipment against chemical and bacterial corrosion, Karvan-L company designed efficient and cost-effective water-soluble and oil-soluble corrosion inhibitors. Corrosion inhibitors are nitrogen-containing surfactants, produced based on natural acids with addition of film-forming admixtures and biocides.
Coal, Coke And Anthracite COAL Coal is a hard, black coloured rock-like substance. It is made up of carbon, hydrogen, nitrogen, and varying amount of sulphur. Coal was form as decomposition took place in the absence of oxygen and much of the hydrogen content of the matter was eroded away, leaving a material rich in carbon. The material was compressed over the years by sand and dirt, leaving the form of a carbon known as coal.In others words we can say that Coal is an underground natural resource of energy and one of the most important primary fossil fuels, which is finding worldwide. Voltcon Resources expertise in sourcing thermal coal internationally for supply to Industries , Exporter , Importer and traders in Worldwide markets. Our goal is to be a key business partner for our suppliers and customers through delivering high quality shipments on-time and at the right quality & price, and demonstrating high reliability, strong business values and agility. Having established ourselves as one of India's leading private coal importers in the last few years, our aim is to grow into one of the largest coal Importing & trading companies in the World . Our short term goal is to grow our traded volume of thermal coal to 4 million tons per annum in the coming years with focus on India and worldwide. VOLTCON PRODUCT RANGE IS AS FOLLOWS Thermal coal South Africa & Indonesian Coal: Also known as steam coal, is used for power and heat generation. We supply Thermal Coal ranging from 3500 GAR to 7000 GAR. Anthracite Coal: A hard, compact variety of coal that has a sub metallic lustre. It bears the highest carbon content and least impurities among all major types of coal. Petroleum coke: The solid non-volatile carbon residue left after the refinement of petroleum. It is used as a source of energy, or as a source of carbon for industrial usage. Metallurgical Coal: Used in the process of creating coke necessary for iron and steel-making. We supply Metallurgical Coal to vast industries across geographies.
Product Name - Pozzoforce Product Description Metakaolin a pozzolon -a silicate based material that consume calcium hydroxide to produce additional calcium silicate hydrat , the material also responsible for holding the concrete together . By consuming lime increases the reinforce property and density of concrete ,decreases the efflorescence virtually eliminates alkali -silicon reactivity .Pozzoforce is optimised and engineered product intended for use in Portland cement based formulations: to endure strength development and durability property Product Specification Physical appearance :Off white or Pinkish White SiO2+AL203 +Fe2O3 (%) : 97 Bulk Density Gm/cc :0.45 Specific Gravity :2.5 Average Particle Size (D50) : 2 um Pozzolan reactivity : 1020 Loss on Ignition (%) : 2.00 Application Areas Concrete Products Cement Refractory Industry Ceramics Rubber Industry Pellet Binder Anti Caking Industry Paint Industry Product Features Improves the strength, durability, and workability of Portland Cement Concrete Reduces permeability, efflorescence and cracking tendency Reduce shrinkage Reduces porosity of Hardened concrete Contain no undesirable impurities such as carbon or sulphur which could affects the curing rate Readily disperse in cement-based systems hence safe and easy to handle Packing - 25KG HDPE bag / In 1 Mt Jumbo Bags Weighing approx. 900 Kg Container details - 18 MT in one container Pricing - 0.40 US$ / KG FOB Mundra port- Gujrat India / FOB Navasheva- Mumbai, India Minimum Quantity - 18 MT Origin - India
About Black Salt Kala namak is a rock salt that has a strong, sulphurous smell. It is also known as Himalayan black salt, Sulemani namak, bit lobon, kala noon, or pada loon and manufactured from the salts mined in the regions surrounding the Himalayas. The condiment is composed largely of sodium chloride with several other components lending the salt its colour and smell. The smell is mainly due to its sulfur content. Because of the presence of Greigite in the mineral, it forms brownish pink to dark violet translucent crystals when whole. When ground into a powder, its color ranges from purple to pink. Production he raw material for producing kala namak was originally obtained from natural halite from mines in India, Nepal, Pakistan and Bangladesh in certain locations of the Himalayas salt ranges,[3][4] or from salt harvested from the North Indian salt lakes of Sambhar Salt Lake or Didwana and the Mustang District of Nepal.[5] Traditionally, the salt was transformed from its relatively colourless raw natural forms into the dark coloured commercially sold kala namak through a reductive chemical process that transforms some of the naturally occurring sodium sulfate of the raw salt into pungent hydrogen sulfide and sodium sulfide.[6] This involves firing the raw salts in a kiln or furnace for 24 hours while sealed in a ceramic jar with charcoal along with small quantities of harad seeds, amla, bahera, babul bark, or natron.[5][6] The fired salt melts, the chemical reaction occurs, and the salt is then cooled, stored, and aged prior to sale.[7][3] Kala namak is prepared in this manner in northern India with production concentrated in Hisar district, Haryana.[6] The salt crystals appear black and are usually ground to a fine powder that is pink.
Organic Moringa Tea Cut Leaves We offer superior quality organic moringa leaves which are 100% organic. The leaves are derived from the plants cultivated in organic method and possess high nutritional values. The leaves are used for making leaf powder that in turn increases the natural defense of body. Also these dried leaves are mainly used for making tea. Specialties Green, natural with aroma No additives and NON GMO Rich in vitamins, phyto nutrients, antioxidants, amino acids Germ free technology Sterile packing Benefits Lowers Blood Pressure Acts as a Sleep Aid - For a good night?s rest. Boost Energy - A single serving of moringa has almost all nutrition. High in Fiber - Moringa is high in fiber, Also a key component in maintaining a healthy cardiovascular system. Controls Diabetes - It is extremely beneficial for diabetic patients. Moringa Oliefera capsules or a drink made from moringa powder can be consumed for keeping the level of sugar normal. Anti-Oxidant - Moringa powder is rich in catechin polyphenols, particularly epigallocatechin gallate (EGCG) that is a powerful antioxidant. Detoxifies - It is often used to purify water due to its detoxifying effects. Being a coagulant agent, it can attach itself to hazardous bacteria and other agents. Improves Immunity Delays Ageing Process - It is an excellent source of antioxidants with high contents of vitamin A, vitamin C, vitamin E and bioflavonoids. Active oxygen radicals cause skin diseases by stealing electrons from normal healthy biological molecules. These nutrients help to block the oxidation of healthy tissue by active oxygen, thus delaying the aging process and lowering the appearance of fine lines and wrinkles. Aids In Keratin Formation - Certain vitamins, minerals and amino acids contained in moringa powder support the metabolic pathways involved in the formation of keratin protein, which is vital for healthy hair. It also contains the amino acid Methionine that supplies sulphur to your hair, thus preventing hair loss. Stimulates Hair Growth - Moringa leaf powder also contains zinc, which stimulates hair growth by enhancing the immune system. Zinc deficiency can result in atrophy of hair follicles due to impairment of DNA and protein synthesis.