3w each epistar led Operating volt:10-30v dc Color temperature:6000k Beam:flood beam/spot beam/combina beam optional Operation temperature -40 Waterproof rate:ip67 Material:diecast aluminum housing Mounting bracket:alu firm bracket Lens:toughened glass Housing color:black Single box
1). LED Lamp: 2xCREE XM-L U2 LEDs 2). Luminous Flux: 2200 Lumens 3). LED Lifespan: 50,000 hours 4). 2 End Cap Switch With Voltage Indicator: *Green Switch: control 10%-40%-70%-100% modes *Orange Switch: control strobe mode only( it will turn to be strobe anytime when you press this button) 5). Modes: light 10%, 40%, 70%, 100%, strobe 6). 3 Colors (green, blue, red) changing on switch to indicate different battery power status 7). Battery: 6-cell battery pack, 6600mAh, 8.4V, waterproof with silicon rubber cover 9). The O-ring Mount: green luminous 10). Body Material: hard oxidation, 6061-T6 Aluminum alloy housing, anodized antiabrasive finish. 11). Weight Of Lamp: 0.1KG (0.85KG/set) 12). Used as bike light & headlamp or helmet light 13). CE, RoHS approved 14). Each set come with bike lamp, 6-cell battery pack, battery pouch, charger, 2 x O-ring mount,headband/ helmet band Each packed into the gift box, 18sets into one carton.
Specification: Brand name : hela lighting Led source : high power LED chip Material : car aluminum alloy +pc cover Input voltage : ac 85-265v Lamp holder : e14/e27/b22 Power : 3w/5w/7w/9w/12w Luminous efficiency : 100-110lm/w Frequency : 50-60hz Power factor(pf) : y0.90 Power efficiency : >90% Color rendering index : ra>70 Emitting color : warm white, white, cool white Color temperature : 2700-7500k Viewing angle : 120 Working temperature : -20~+50 Working humidity : 10%-90% Storage temperature : -20~+45 Lifespan : ¡y50, 000 hours Guarantee : 2 years 3w dimension : (d) 50mm * (h) 100mm net weight : 70g gross weight : 90g 5w dimension : (d) 60mm * (h) 110mm net weight : 125g gross weight :148g 7w dimension : (d) 60mm * (h) 135mm net weight : 157g gross weight :182g 9w dimension : (d) 70mm * (h) 153mm net weight : 265g gross weight :300g Packaging detail :white box or color box, 100 pcs/ctn Features: 1, wide range of available voltage and low consumption. 2, environment-friendly and no uv or ir addiation. 3, easy to install and maintain and normal base type e can be matched. 4, replacement of traditional bulbs and no subsidiary fixture, such as ballasts and starters. 5, long lifespan , low cost of maintenance. 6, energy saving and high luminous intensity, energy consumption can be 30% of traditional bulbs. 7, anti-shake, convenient for trnasportation. Application: 1). Living room, bedroom, kitchen, washroom; 2). School, university, hospital, hotel; 3). Conference, meeting room, show room, showcase; 4). Commercial complexes; 5). Factory, plant, warehouse, office; 6). Supermarket, department store. Trade terms: 1.Payment: 30% t/t advanced, 70% upon b/l scanning 2.Delivery time: 7-15days 3.Shipping port: ningbo or shenzhen, mainland china 4.Moq:100pcs Skype: helalighting
Remote control ir repeater/ ir extender with 1 receiver & 1 emitter ( for 1 av device ) & usb 5v adaptor u101-p To amplify the ir signal of remote control for 1 av player such as iptv. Cd/vcd/dvd/ blu-ray, home system, television, setup box, recorder, catv, karaoke system, etc. It is also recommended for players/ equipments which are concealed in console or cabinet. Packages : 1. Usb adaptor 5v 500ma
Remote Control IR Repeater/ IR Extender with 1 Receiver & 8 Emitters ( for 8 AV Devices & 1 Display ) with DC12V power BD108 IR REMOTE CONTROL REPEATER / EXTENDER BD108 This model BD108 is used for extending IR signals of 8 Electronics Devices Remote Control IR Extender/ IR Repeater ( Transceiver ) is a product which amplifies the IR signal of your appliances. By connecting this repeater to your appliances, you may be able to conceal your appliances such as in your TV console or cabinet. There are 3 main parts in this repeater namely Emitter, Receiver & Transceiver. The emitter is to be pasted on the IR point of your appliances while the receiver is placed in a position of which it communicate signal with your remote control. The transceiver box process signal received from the Receiver and generate signals out to Emitters which in turn to your Players/ Appliances. FEATURES High Sensitivity - Real time transmission without any delay with its high sensitivity sensor. CFL Friendly - This unit can be installed in an area with compact fluorescent lighting and work in most lighting environments Remote Indication light on IR Receiver - Green being power connected while flashing red indicates the signal is being sent. Broad bandwidth - With this feature, it is compatible with almost all the electronics appliances in the market with its wide frequency range Size - Small & Solid design Low Power - 12V DC, 30mA max INSTALLATION IR RECEIVER ( Note: Plasma Displays emit IR frequencies during use and may cause interference. It is advised to distance the IR Receiver from any Plasma TV. Ability to control multiple appliances at various locations up to 10m. ) Connect IR Receiver to any of the 3.5mm IR ports on the IR Transceiver box. If 2 or more IR receivers are connected, the distance between 2 IR Receivers should not be less than 6 m to avoid interference. ( Only 1 IR Receiver for this model BD108 ) (Note : Maximum of 6 IR Receivers can be connected to the 3 Ports of 3.5mm Jack ( on Transceiver ) by using 3.5mm Splitter cable 1 Male to 2 Female. Three 3.5mm Splitter cables connect to transceiver to obtain 6 ports of 3.5mm ) Remote Control from the room is achievable if the AV cable from TVs ( Room ) is connected to the Player/ Appliance ( Hall ). ( I.e Sharing a Player/ Appliances to watch in different rooms ) See Picture. IR EMITTERS Insert Emitter cable to any of the Emitter Input Ports on Transceiver box. ( Optional : Maximum of 24 emitters can be connected to the 6 Transceiver Emitter Input Ports, using 4 Emitters head per cable type ) ( 8 Emitters head for this model BD108 ) Stick the emitter near to the IR Point of Player/ Appliances. Only one emitter head is applicable on each Player/ Appliance Operate the Remote Control faces the IR Receiver. Keep moving the IR Emitter on Player/ Appliance to achieve best signal transmission. Stick the Emitter to the point which produced the best signal. See Picture. POWER SUPPLY ( 2 Ways of power supply ) BD Series - Direct power using DC 12V/500m OD 5.5mm ID 2.1mm adaptor ( Included) BU Series - By connecting the IR Transceiver box to Player/ Appliance via USB cable. Using the power of Player/ Appliance to power up the Transceiver box OR connects the Transceiver to a USB DC 5V adaptor. ( Not included ) TECHNICAL SPECIFICATION Receiving Frequency Range : 34 KHZ to 60KHZ Emitting Frequency Range : 38 KHZ & 56KHZ Receiving Distance : 8 Meter Emitting Distance : 100-200mm Power Consumption : 12VDC, 30mA max. Dimension : IR Receiver 31 (L) × 17 (W) × 13 (H)mm IR Emitter 13 (L) × 8 (W) × 5.5 (H)mm IR Transceiver Box 90 (L) × 55 (W) × 26 (H) mm Cable Length : DC 12V Adaptor Cable 0.7m, IR Receiver 1.5m, IR Emitter 3m Weight : IR Receiver 30g IR Emitter ( Dual heads ) 25g x 4 IR Transceiver Box 140g 12VDC Adaptor 80g FREQUENTLY ASKED QUESTIONS & REMEDIES 1. HOW TO LOCATE THE IR POINT ON PLAYERS/ APPLIANCES ? Move the emitter around the surface of player until a signal is received from the remote control. Once a signal is received, paste the emitter on the particular point on the player. 2. REMOTE MUL-FUNCTION AFTER INSTALLATION ? Check the battery of the remote control； Red light blinks on IR Receiver indicates that signal is being sent from Remote Control to IR Receiver and IR Receiver is in working condition. Check the distance between the IR Receiver & Emitter. Check if the emitter is pasted on the right position ( IR point of the player ) 3. INSENSITIVITY OF IR RECEIVER ? Check if the emitter is pasted on the right position ( IR point of the player ) Change to USB 5V adaptor for power supply Move the IR Receiver away from the TV as there may be electrons interference from the TV. 4. WATER MARKS, POWER NOISE AND UNCLEAR PICTURE AFTER INSTALLATION ? Noise originated from the connections of TVs, Players. Try cleaning with a dry cloth or with less alcohol. Reinstate power thereafter. Network Cable – Please ensure that only quality full copper CAT5E is used so as to regulate better image quality even if the distance is far. Inferior quality of CAT5E will decrease the distance and AV of the display. Connection of the CAT5E head ( RJ45) also affects the quality of the image and current noise. Ensure that CAT5E is fully inserted to the Transmitter/ repeater. 5. AS LONG AS THE PLAYER/ APPLIANCE IS ON, ANY SUB-TV ( ROOMS ) CAN BE WATCH EVEN IF THE MAIN TV IS OFF . Ability to use the Remote Control in the room to control the Player/ Appliance in the hall. 6. WHICH REMOTE CONTROL TO USE? Use the Remote Control of the respective Players/ Appliances to manipulate the controls. PACKAGES 1. IR Transceiver Box ( 1 Piece ) 2. IR Receiver Cable ( 1 Piece with 1 Receiver on cable ) 3 IR Emitter Cable ( 4 Pieces with 2 Emitters on each cable ) 4. DC 12V Adaptor ( 1 Piece ) Type of Adaptor pin will be packed according to your requirement. 5. Instruction Manual Box, 600g
Dynamo 3 LED Dynamo Emergency Light Super Bright 3 LED Bulbs Dual functions never get caught in the dark again! 1 minute of winding equals half an hour of power. 3 Stage Switch - Press 1 time: LED turns on - Press 2nd time: LED turns off - Press 3rd time: All 3 LEDs turn on. RoHs Quality Lead Free Solder Made from All New Materials. Superbright 3 LED Hand Crank Flashlight Crank Always Ready No Batteries Needed Product size: 9*5.5*3.5cm Case material: ABS Unit weight: 95g
Remote Control IR Repeater/ IR Extender with 1 Receiver & 2 Emitters ( for 2 AV Devices ) and USB 5V adaptor U102-P This unit U102-P can be used to extend the IR signal up to 2 Devices. Remote Control IR Repeater/ IR Extender can be used with weak IR Remote control signal from players such as IPTV. CD/VCD/DVD/ Blu-ray, Home System, Television, Setup box, recorder, CATV, Karaoke system, etc. It is also recommended for Players/ Equipments which are concealed in console or cabinet. Operating at 34KHz ~ 60KHz, This IR Repeater is the smallest yet powerful IR repeater with high speed transmission without delay. Series available as follows : U Series powered by USB 5V and D series powered by DC12V U101, U101A, D101 --- 1 Receiver 1 Emitter ( for 1 AV Equipments ) U102, U102A, D102 ---1 Receiver 2 Emitters ( for 2 AV Equipments ) U104, U104A, D104 ---1 Receiver 4 Emitters ( for 4 AV Equipments ) U101-P. U101A-P, U102-P, U102A-P, U104-P, U104-AP etc. – USB 5V Adaptor Included U101, U101A, U102, U102A, U104, U104A etc. – USB Power Adaptor not included PACKAGES : 1. USB Adaptor 5V 500mA Our U series which is powered by USB adaptor ( Included ) can also be powered by connecting the USB cable to the USB port on your AV Equipment. 2. IR Emitter Cable ( 2 IR Emitter heads ) to DC3.5mm Male 1m IR Emitter Cable is one which to be stuck the Emitters on the IR Point of your respective AV equipments and DC3.5mm is to connect with Item 3. 3. USB to IR Receiver Length 2m. IR Receiver to DC3.5mm 2m USB is to be connected to USB adaptor or your AV device for power. INSTALLATION : 1. Clean the surface of your AV equipments. Stick the IR Emitter on each the IR point of your AV Equipments. Connect the ends of two DC3.5mm cable. 2. Place the IR Receiver such a way that it is facing your remote control. 3. Connect the USB to USB Adaptor/ USB port of AV Equipment for power 4. Power up & all is ready to go. TECHNICAL SPECIFICATION : Receiving Frequency ( Broadband ) : 34KHz ~ 60KHz Emitting Frequency ( Broadband ) : 38 KHz & 56KHz Receiving Distance : 8 meter Emitting Distance 10-20 cm Power Consumption < 30mA Dimension for Receiver & Emitter : 31 (L) ×17 (W) ×13 (H) mm, 13 (L) ×8 (W) ×5. 5 (H) mm Input AC 100-240V/ Output DC 5V : USB 5V 500mA FREQUENTLY ASKED QUESTIONS : 1. How to locate the IR Point of the AV Equipment? A. Set up as per the installation procedures without step one. With the help of an assistant controlling the AV equipment Remote Control, move the IR Emitter around on the window of AV equipment until signal sent is received. 2. Remote Control doesn't work after installation ? A. Check the power status of your AV equipment B. Check the connection of USB to AV Equipment/ Power adaptor C. Ensure that remote control is facing the IR receiver ( Flashes red when a signal is sent ) D. Check the position of IR Emitter. E. Place IR Receiver away from Plasma or CCFL screen as it may affect the remote control signal. F. Contact your dealer if the situation does not improve after the above alteration. Box, 310g
LED Bulb Light E27 1.Saving energy 60% 2.Unique and customized heat sink 3.AC:100~240V 4.Long lifetime and no UV.
4-layer PCB Minimum line width/space: 5mils Surface finish: immersion gold Board thickness: 15.75mils Minimum drilled hole diameter: 10mils Copper thickness:1oz 1
Product Feature: 1)The lamp shade is one-step injection of high quality PC,clean and smooth. Joint line could not recognized by eyes and no sprue on it. 2)High light transmittance(90%) and illuminant concealment, strong light diffusivity without shadow and glare turn point light source to spherical lighting. 3)Frame retardancy.Its grade cam be from V2-V0. 4)Outstanding physical properties,making it resistance to impact and fracture.
Material: FR4, High TG FR4 Rogers 4003,4350,Al Aluminum metal base,Taconic,Halogen Free material, CEM-3,Fr2,CEM-1,CEM-2,94VO, Rogers HF material, Polymide,Flexible PCB FPC etc. Layer counts: 1-40 layers, (Normaly is double side and Multilayer PCB) Finished Copper Thickness: 0.5-5 OZ Finished Board Thickness: 0.2-6.0mm Min. Line/Track Width: 4mil Min. Line/Track Space: 4mil Min. Contour Tolerance: +/-0.1mm Min. Finished Diameter of PTH Hole: 0.1mm Max. Board Thickness/Hole Ratio: 12:1 Min. Solder Mask Bridge: 4mil (Min. SMT Pad Space 8mil) Min. Legend(Silkscreen) Track Width: 5mil Min. Legend(Silkscreen) Height: 30mil Min. drilling slot size: 0.6mm Solder mask color: green, black, blue, white, yellow, purple, and matt, etc. Solder mask hardness: 6H Legend/Silkscreen Color: white, yellow, black, etc. Surface Treatment: HAL, Lead Free HAL, Immersion gold, OSP, Immersion tin, Immersion silver, etc. Other Technology: Gold finger, peelable mask, Non-across blind/buried vias, characteristic impedance control, Rigid-flex board etc. Reliability Test: flying probe test/fixture test, impedance test, solderability test, thermal shock test, hole resistance test, and micor metallographic section analysis, etc. Wrap and twist: ¡¡¡¨¬10.7% Flammability: 94V-0 High Density PCB, Impedance control PCB, Buried & Blind Via, Gold Finger PCB, Gold Plating PCB,Immersion Golde surface, HASL surface.Heavy Copper PCB, Rogers PCB,Rigid Flex PCB, Teflon PCB, Halogen Free PCB, High TG PCB(High Temperature PCB), HF PCB(High Frequency PCB); Aluminum PCB(Metal Base PCB) with UL certification STRONGTIMES Electronics offers PCB manufacture service, including: Single Side PCB, Double Side PCB, Multilayer PCB, Rigid Flexible PCB, Flexible PCB, Impedance PCB, HDI PCB, MCPCB, Aluminum PCB. fabricate boards with 2-12 layers and more. PCB assembly, and Products are applied to a wide range of High-tech industries such as: LED, telecommunication, android tv box, MID, tablet PC, computer application, lighting, game machine, industrial control, power, automobile and high-end consumer electronics. main market: North America, Oceania, Southeast Asia,Eastern Europe,Africa,Hong Kong/ Macao/ Taiwan; Latin America,Japan & Korea,Mainland China,Western Europe,Northern Europe,South Asia,Middle East etc.pcbmaking.com Quality Policies Quality First All work shall be done Properly from the start Continuous Improvement
Brand Name: strongtimes Number of Layers: 4 Base Material: FR-4 Copper Thickness: 3mil Board Thickness: 1.6mm Min. Hole Size: 4mil Min. Line Width: 3mil Min. Line Spacing: 3mil Surface Finishing: lead free hal STRONGTIMES Electronics offers PCB manufacture service, including: Single Side PCB, Double Side PCB, Multilayer PCB, Rigid Flexible PCB, Flexible PCB, Impedance PCB, HDI PCB, MCPCB, Aluminum PCB. fabricate boards with 2-12 layers and more. PCB assembly, and Products are applied to a wide range of High-tech industries such as: LED, telecommunication, android tv box, MID, tablet PC, computer application, lighting, game machine, industrial control, power, automobile and high-end consumer electronics. main market: North America, Oceania, Southeast Asia,Eastern Europe,Africa,Hong Kong/ Macao/ Taiwan; Latin America,Japan & Korea,Mainland China,Western Europe,Northern Europe,South Asia,Middle East etc. pcbmaking.com
Brand Name: strongtimes Number of Layers: 4 Base Material: FR-4 Copper Thickness: 3mil Board Thickness: 1.6mm Min. Hole Size: 4mil Min. Line Width: 3mil Min. Line Spacing: 3mil Surface Finishing: lead free hal Printed Circuit board, Single Side PCB, Double Side PCB, Multilayer PCB, Rigid Flexible PCB, Rigid PCB, Flexible PCB, Impedance PCB, HDI PCB, MCPCB, FPC, Aluminum PCB, PCB, PCBA StrongTimes Electronics Co., Ltd is a high and new technological company which specializing in manufacturing single-sided, double-sided and multilayer PCB of high precision, high density and high reliability.
Brand Name: strongtimes Number of Layers: 4 Base Material: FR-4 Copper Thickness: 3mil Board Thickness: 1.6mm Min. Hole Size: 4mil Min. Line Width: 3mil Min. Line Spacing: 3mil Surface Finishing: lead free hal Printed Circuit board, Single Side PCB, Double Side PCB, Multilayer PCB, Rigid Flexible PCB, Rigid PCB, Flexible PCB, Impedance PCB, HDI PCB, MCPCB, FPC, Aluminum PCB, PCB, PCBA StrongTimes Electronics Co., Ltd is a high and new technological company which specializing in manufacturing single-sided, double-sided and multilayer PCB of high precision, high density and high reliability.
Specification 1. 300W(144*3W) LED Grow Light with Metal Shell, 144pcs 3w LED, constant current power supply, high performance, low consumption 2. Input voltage 85-265V. It is convenient and safe, suitable for any country. 3. LED lifespan: 50000 hours 4. 6 PCS fans built in to cool down the temperature, which keeps the item running well. 5. Application for all phase grow,flower,friut. 6. Different ration optional, Red is good for flowering, budding and blue is good for vegetative. Different plant need different ratio 7. Environment-friendly, Don't contain the harmful substance Parameter Model TLG-06A Product 300W LED Grow Light Size 492*320*82mm Power 300W (144*3W) Input voltage AC85~265V Lumens 14400 Lm Input current 1.63~5.08A Lifespan 50,000 Hours Work frequency 50/60 Hz Color Red/Blue/white/orange/yellow Working environment -20~40 Lighting Area 42M2/3m Inner box 555*383*160mm /PCS GW 10kg/pcs Carton box 560*405*340mm /2PCS GW 19kg/2pcs Feature 1) 300W (144*3W) can replace 600W-800W HPS Grow Lights, Save 80% on electricity. 2) 3W high power LED as a lighting source. 3) Lifetime over 50,000 hours. 4) We usually provide the ratio is 8:1, 7:2 and 7:1:1 Red &Blue & Orange& White, Mixture to plants. 5) We have 620-630nm and 660nm of red, 450-460nm and 460-470nm of blue wavelength provide. Red is good for flowering, budding and blue is good for vegetative, you can choose the wavelength and color ratio which is most suitable for your plant growth. 6) Built-in cooling system to solve the heat dissipation excellently 7) Built-in power supply, CE approved, No setup required, just simpler and safer plugs directly into AC120V/220V, no reflector & ballast needed. 8) Ideal for all phases of plant growth, and works well with any indoor garden, whether hydroponics or soil based. 9) The lighting area and height above the plant can be changed according to different plants and environment,and also technical parameters are changed. 10) Optional: 50W, 90W, 120W, 150W, 200W, 300W, 600W, 600(288*3W) Notice 1. It work under the standard environment . 2. Don't touch the surface when it working. 3. Indoor use only. 4. The sample test is for R:B 8:1,for reference only. Standard industry package: inner box:555*383*160mm/PCS Carton box:560*405*340mm/2PCS
Specification 1. 300W(144*3W) LED Grow Light with Metal Shell, 144pcs 3w LED, constant current power supply, high performance, low consumption 2. Input voltage 85-265V. It is convenient and safe, suitable for any country. 3. LED lifespan: 50000 hours 4. 6 PCS fans built in to cool down the temperature, which keeps the item running well. 5. Application for all phase grow,flower,friut. 6. Different ration optional, Red is good for flowering, budding and blue is good for vegetative. Different plant need different ratio 7. Environment-friendly, Don't contain the harmful substance Parameter Carton box 560*405*340mm /2PCS GW 19kg/2pcs Feature 1) 300W (144*3W) can replace 600W-800W HPS Grow Lights, Save 80% on electricity. 2) 3W high power LED as a lighting source. 3) Lifetime over 50,000 hours. 4) We usually provide the ratio is 8:1, 7:2 and 7:1:1 Red &Blue & Orange& White, Mixture to plants. 5) We have 620-630nm and 660nm of red, 450-460nm and 460-470nm of blue wavelength provide. Red is good for flowering, budding and blue is good for vegetative, you can choose the wavelength and color ratio which is most suitable for your plant growth. 6) Built-in cooling system to solve the heat dissipation excellently 7) Built-in power supply, CE approved, No setup required, just simpler and safer plugs directly into AC120V/220V, no reflector & ballast needed. 8) Ideal for all phases of plant growth, and works well with any indoor garden, whether hydroponics or soil based. 9) The lighting area and height above the plant can be changed according to different plants and environment,and also technical parameters are changed. 10) Optional: 50W, 90W, 120W, 150W, 200W, 300W, 600W, 600(288*3W) Notice 1. It work under the standard environment . 2. Don't touch the surface when it working. 3. Indoor use only. 4. The sample test is for R:B 8:1,for reference only. Standard industry package: inner box:555*383*160mm/PCS Carton box:560*405*340mm/2PCS
Specification 1. 300W(144*3W) LED Grow Light with Metal Shell, 144pcs 3w LED, constant current power supply, high performance, low consumption 2. Input voltage 85-265V. It is convenient and safe, suitable for any country. 3. LED lifespan: 50000 hours 4. 6 PCS fans built in to cool down the temperature, which keeps the item running well. 5. Application for all phase grow,flower,friut. 6. Different ration optional, Red is good for flowering, budding and blue is good for vegetative. Different plant need different ratio 7. Environment-friendly, Don't contain the harmful substance Parameter 4) We usually provide the ratio is 8:1, 7:2 and 7:1:1 Red &Blue & Orange& White, Mixture to plants. 5) We have 620-630nm and 660nm of red, 450-460nm and 460-470nm of blue wavelength provide. Red is good for flowering, budding and blue is good for vegetative, you can choose the wavelength and color ratio which is most suitable for your plant growth. 6) Built-in cooling system to solve the heat dissipation excellently 7) Built-in power supply, CE approved, No setup required, just simpler and safer plugs directly into AC120V/220V, no reflector & ballast needed. 8) Ideal for all phases of plant growth, and works well with any indoor garden, whether hydroponics or soil based. 9) The lighting area and height above the plant can be changed according to different plants and environment,and also technical parameters are changed. 10) Optional: 50W, 90W, 120W, 150W, 200W, 300W, 600W, 600(288*3W) Notice 1. It work under the standard environment . 2. Don't touch the surface when it working. 3. Indoor use only. 4. The sample test is for R:B 8:1,for reference only. Standard industry package: inner box:555*383*160mm/PCS Carton box:560*405*340mm/2PCS
Specification 1. 300W(144*3W) LED Grow Light with Metal Shell, 144pcs 3w LED, constant current power supply, high performance, low consumption 2. Input voltage 85-265V. It is convenient and safe, suitable for any country. 3. LED lifespan: 50000 hours 4. 6 PCS fans built in to cool down the temperature, which keeps the item running well. 5. Application for all phase grow,flower,friut. 6. Different ration optional, Red is good for flowering, budding and blue is good for vegetative. Different plant need different ratio 7. Environment-friendly, Don't contain the harmful substance Carton box,560*405*340mm /2PCS,GW,19kg/2pcs Feature 1) 300W (144*3W) can replace 600W-800W HPS Grow Lights, Save 80% on electricity. 2) 3W high power LED as a lighting source. 3) Lifetime over 50,000 hours. 4) We usually provide the ratio is 8:1, 7:2 and 7:1:1 Red &Blue & Orange& White, Mixture to plants. 5) We have 620-630nm and 660nm of red, 450-460nm and 460-470nm of blue wavelength provide. Red is good for flowering, budding and blue is good for vegetative, you can choose the wavelength and color ratio which is most suitable for your plant growth. 6) Built-in cooling system to solve the heat dissipation excellently 7) Built-in power supply, CE approved, No setup required, just simpler and safer plugs directly into AC120V/220V, no reflector & ballast needed. 8) Ideal for all phases of plant growth, and works well with any indoor garden, whether hydroponics or soil based. 9) The lighting area and height above the plant can be changed according to different plants and environment,and also technical parameters are changed. 10) Optional: 50W, 90W, 120W, 150W, 200W, 300W, 600W, 600(288*3W) Standard industry package: inner box:555*383*160mm/PCS Carton box:560*405*340mm/2PCS
1.Power consumption: 18w 2.Input voltage:ac 100v~240v 3. Work frequency:50-60hz 4. Led efficiency:90~100lm/w 5. Led: cob 6.Color temperature:2700-3500k(warm white) 5700-6500k(pure white) 7.Surface color: Sliver/brass/shinning white/matt white 8.Viewing angle:30/45/60 degrees 9.Color rendering index: 10.Power factor: 11. Working temperature:-30 ~ 50 12. Lifespan 13. Warranty:2 years 14.Material:aluminum 15. Lamp head can be adjusted: 16. Certificate:ce& rohs approval
1.Power:3x1w 5x1w 7x1w Color temp:3000k 4100k 6500k Material;aluminium Installment :recessed Size:d=90 h=50 install hloe:d=75mm color:white/silver/gold/black 1pc/box 50pc/carton
