OR-KRV310 Household Intelligent Sweeping Robot is light in design and easy to operate. It can be controlled remotely by infrared remote controller or APP. Built-in high-precision gyroscope, like a compass, can navigate the sweeping route, to ensure that the sweeping robot in the sweeping process to reduce leakage. The three processors cooperate with each other to collect and process sensor information synchronously. By locating and calculating, the map is constructed in real time and the sweeping path with edge first and Z glyph is formed. It is suitable for wood floor, tile, marble and other home environments. Characteristics : Gyroscope navigation planning, bow shaped sweep path, smooth path planning, low repeat route. Ultra thin 5.6cm design, strong performance. The ultra thin body can clear the bottom of the bed, cabinet, sofa and so on. The dust box water tank is two in one, the dust box capacity is 350ml, the water tank capacity is 150ml, no space is wasted, dust removal and water exchange are done once. Wet and dry, one step in place. The mop is made of microfiber material for better water absorption and water retention. Upgrade mobile APP, smart control system more simple and smart, one key to start, control anytime anywhere. One key to start the automatic cleaning function, all-round automatic cleaning, when the power is less than 20%, the machine will automatically return to charge. About 1000PA strong suction, can suck hair, paper scraps, dust and so on. The machine is equipped with a down vision sensor around the head and four anti falling designs to protect the machine. Equipped with 10 sets of sensitive anti-collision sensors, slow down when encountering furniture. The off-road drive wheel has strong grip and can easily cross obstacles such as lines and carpets in the room. The working noise is low. Up to 2000mAh lithium battery, it can maintain super long cleaning time. Once charging, it can sweep the whole house easily.
HPHT mono crystal diamond plates are used for cutting tools for non- ferrous and non- metallic materials, diamond dresser, wear parts and wire drawing dies, etc Details: HPHT mono crystal diamond (MCD) is also called as synthetic single crystal diamons (SCD). It is synthetic diamonds produced by high pressure high -temperature synthesis under tightly controlled growth conditions. Advantages Of HPHT Single Crystal Diamond Plate: * The ideal ultra-precision cutting tool material * Large size,up to 7x 7 x 1 mm. (thickness 1.0-1.7mm) * High toughness, Scratch proof and wear resistance * High quality grade, pure color, better shape. High clarity under visible light and infrared light * Great Thermal Stability,the unrivalled thermal conductivity ( > 2000 W cm 2 K 1 ) HPHT Single Crystal Diamond Plates Are Divided Into Grade A, Grade B And Grade C Grade A:with precise laser cut edge ,no missing angle,Clean crystal ,without any inclusions under the microscope Grade B:a lack of angle,can see the minimal inclusions under the microscope Grade C:a lack of angle, can see the visible inclusions and scrap inside under the lights Application Of HPHT Single Crystal Diamond Plate: More Super Hard mainly produce industrial-grade single crystal synthetic diamond plate. It is used for cutting tools for non-ferrous and non-metallic materials, specialty tools (cutter, turning tools, carving tools, angle tools)
Car cooling fan universal electric 9" 24v 12v condenser car fan 1. 4 inch Dameter 5 pcs ABS fan 2.with two head fan,two speed control 3.fixed by two pcs of super glue cushion 4. with speed regulation switch 5. with oscillating controller 6. operated by 12v or 24v DC (optional) 7. color box size:27*11.5*13CM 7. use in a car, bus, truck, plane, RV, boat Note 1.After open the packing,please properly handle bags in order to avoid chinldren or pets suffocation. 2.Before use,pls place the fan smoothly. 3.Please do not place in much soot,dustplaces for using. 4.Do not use the fan pointed directly at the fire or gas for blowing,Do not put any metal or flammable items into the product,in order to avoid trouble and fires. 5.Do not use at places where near fire or has the high temperature,waste paper,scrap metal. 6.Do not dip part of fan or the whole machine into water for cleaning,when using in the outdoor if there is thunder,please stop immediately,in order to avoid electric shock and fire. 7.The baby under adult supervision for using ,please keep infants and young children far away from dry battery. 8.When cleaning,please do not directly spray the detergent to the fan,in order to avoid damaging the plastic parts.
APPEARANCE Dark Gray to Black SIZE 7"x9"x9' or 7"x9"x8'6" (other sizes by special order) WEIGHT 250 to 270 lbs. SURFACE HARDNESS 7,000 lbs. DENSITY 72 Lbs. per cubic foot THERMAL EXPANSION 0.0075% per ºF MODULUS OF RUPTURE Greater than 2,700 PSI MODULUS OF ELASTICITY Greater than 250,000 PSI COMPRESSIVE MOE 39,000 PSI RAIL SEAT COMPRESSION 2,400 PSI FLAMMABILITY No combustion after 20 seconds of impinging flame; self extinguished after 120 seconds of impinging flame SPIKE INSERTION 7,000 lbs. SPIKE LATERAL RESISTANCE 2,600 lbs. SPIKE WITHDRAWAL 3,300 lbs. (cut spike)(avg) SCREW SPIKE WITHDRAWAL 8,000 lbs. RESISTIVITY 500+ Mega-ohms @ 500 volts BETTER SYSTEM ECONOMICS Significantly reduced maintenance, longer tie life, minimum disposal costs and reduced rail down time all contribute to the economic benefits. IMPROVED TRACK RELIABILITY composite ties have been shown to improve track performance over time. They are not susceptible to plate cutting or decay, and they hold spikes and screws very well, so they maintain gauge on both straight and curved track over millions of gross tons of load, increasing track reliability and safety. ENVIRONMENTAL BENEFITS composite ties are 85% recycled material. Each mile of track uses approximately 2 million plastic bottles, 9 million plastic bags and 10,000 scrapped vehicle tires instead of consuming over 750 trees.
Features: CW-F04 is a machine cutting multi-panel PCB according to the pre-edited path by use of high-speed motion of milling cutter. Getting rid of the cutting flaws of manual cutting, C-CUT or Push cut, it improves product quality and reduces scrap rates. The machine adopts human-machine interface vie Windows XP, which is simple and convenient, able to achieve automatic cutting path correction, edit and modification of high-pixel CCD program, block program and single-step program. The PCB with two interactive plates loading and unloading materials will effectively reduce machine idle time, thus achieve an ideal productivity. With a high-pixel CCD amplification lens, auxiliary demonstration program and editing function, the machine can work more accurately and get sharper graphics. Equipped with automatically mark positioning correction system, the motion path is displayed in real time and traced in an analog way; all in all realize a clear vision. Due to the automatic position correction function, PCB can c ut more accurately. Within the maximum 3mm, the machine can correct the deviated position automatically, therefore lowers the standard for operators to place the plate, in this way to improve work efficiency immensely. The copy function of the two plates, the block, arrays, multi-angle plate, the single tracing modification function and block editing function indeed simplify the process of programming and increase efficiency.
Ultrasonic Cake Slicing Machine Product Description Ultrasonic food cutting inline program is CHEERSONIC according to customer needs and developed a more humane ultrasonic food cutting program. After field visits and discussions, CHEERSONIC technical engineers will designate specific solutions to meet the existing production line, in the original raw material mixing unit, baking unit, cutting unit, the packaging unit of the complete production line to replace the traditional Cutting unit, the use of high-tech ultrasonic technology to achieve better cutting results for enterprises to save labor costs, material costs, time costs. VIEDO https://youtu.be/2t0UVrGCl48 Free Testing To facilitate customers to understand the performance of ultrasonic food cutting products and matching, CHEERSONIC ultrasound to provide free testing. The following steps, online message or telephone consultation, our sales engineers will be given within 24 hours of the corresponding preliminary advice, after consultation to determine the program submitted to the technical engineer review, for less than technical engineers and customers for further consultation and resolution, this The process will be carried out several times to achieve the optimal program, sample test, technical engineers will be based on the actual test results are given the final program. Trial Service If you want to test the efficiency of ultrasonic food cutting line equipment in your own business long-term, you can hire the existing standard equipment. If necessary, can be a message or telephone to my company, sales engineers will contact you within 24 hours of consultation with specific trial services. Product Features Inline Customized solutions fit perfectly with your existing production lines Integration operation, simple operation Advantage Inline operation without human intervention Low scrap rate, saving raw materials Easy to cut, to prevent sticking knife phenomenon Clean and easy to clean Cutting patterns are diverse, rectangular, square, triangular, rhombic, fan-shaped Wide range of cutting objects, frozen products, including cream products can adapt
This wrapping/packaging paper machine is designed for both single and double layers. It comes in a variety of models, including the 1092 type, 1575 type, 1760 type, 1880 type, 2100 type, 2400 type, 2880 type, 3200 type,3600 type,4200 type and 4800 type. The number represents the machine deckle. It can also be equipped with a relevant device, according to paper grammage, machine speed, output, and other parameters. The main equipment: 1. Pulp-flowing box: It adopts open-type pulp-flowing box, consisting of pyramid tube, staircase diffuser, distributing roller and box body. Staircase diffusion orifice plate pulp distributor is three-stage diffusion, which made of organic glass and upper and lower lip plates made of stainless steel. The upper lip plates can do full and local adjustment is three-stage diffusion. 2. Fourdrinier part: Wire table is 18000mm. Except draw-out seat made of alumina alloy, table rack is all welded by section steel with 1.5mm stainless steel cladding. Wire part is mainly composed of chest roller, forming board, wire-driving plate, water scrapping board, moisture absorbing box, and vacuum water-absorbing box, vacuum roller, wire-driving roller, electrical wire-tighter, pneumatic corrector, constant-tension wire-tighter, incision needle and margin raising device. 3. Press part: It adopts vacuum absorption injection paper, one streak of vacuum pressing and three streaks of pressing. 4. Drying part: It is set 28 pieces of f1500mm drying cylinders, including one f3000mm big cylinder of array type, 6+6+8+1+glueing machine+8 driven by enclosed gear box and lubricated by sparse oil. 5. Driving and control part: It adopts AC frequency conversion speed, drive step by step. Hard tooth surface gear box connected by universal coupling is used, and entire digital closed circle control system is used. 6. Press-polishing and paper reeling: It adopts super press polishing machine and level paper reeling machine.
This wrapping/packaging paper machine is designed for both single and double layers. It comes in a variety of models, including the 1092 type, 1575 type, 1760 type, 1880 type, 2100 type, 2400 type, 2880 type, 3200 type,3600 type,4200 type and 4800 type. The number represents the machine deckle. It can also be equipped with a relevant device, according to paper grammage, machine speed, output, and other parameters. The main equipment: 1. Pulp-flowing box: It adopts open-type pulp-flowing box, consisting of pyramid tube, staircase diffuser, distributing roller and box body. Staircase diffusion orifice plate pulp distributor is three-stage diffusion, which made of organic glass and upper and lower lip plates made of stainless steel. The upper lip plates can do full and local adjustment is three-stage diffusion. 2. Fourdrinier part: Wire table is 18000mm. Except draw-out seat made of alumina alloy, table rack is all welded by section steel with 1.5mm stainless steel cladding. Wire part is mainly composed of chest roller, forming board, wire-driving plate, water scrapping board, moisture absorbing box, and vacuum water-absorbing box, vacuum roller, wire-driving roller, electrical wire-tighter, pneumatic corrector, constant-tension wire-tighter, incision needle and margin raising device. 3. Press part: It adopts vacuum absorption injection paper, one streak of vacuum pressing and three streaks of pressing. 4. Drying part: It is set 28 pieces of f1500mm drying cylinders, including one f3000mm big cylinder of array type, 6+6+8+1+glueing machine+8 driven by enclosed gear box and lubricated by sparse oil. 5. Driving and control part: It adopts AC frequency conversion speed, drive step by step. Hard tooth surface gear box connected by universal coupling is used, and entire digital closed circle control system is used. 6. Press-polishing and paper reeling: It adopts super press polishing machine and level paper reeling machine.
Automatic aluminum foil container production line Model: seac-63as Units: automatic feeder+automatic 63ton press+cavities mould+auto stacker+scrap sucker& presser. It fit for all common size aluminum foil container production requested. The big capacity could to cover big range of size products. Lower power requested than other old model machines. Specification: 1. Raw material: aluminum foil; thickness: 0.040mm~0.250mm; Alloy: 8011, 8006, 3003, 3005 etc.; 2. Japan inverter, plc and 10inch touch screen control system; 3. Max. Width of aluminum foil: 800mm; 4. Max. Diameter of aluminum foil: 700mm; 5. Core diameter of aluminum foil: 76/152mm; 6. Working speed: 40-65 times/min; 7. Total power: 12.5kw+2kw+2kw+1kw; 8. Compressed air needed: 0.5- 0.8 mpa, 0.2m3/min; 9. Install dimension: 5800*2600*3300mm; Technical data: Max. Container size: single cavity 550*450*120mm; Slide block stroke: 180-260mm; Slide block dimension: 380*145mm; Automatic mould adjust unit: 0.5kw; Work plate dimension: 1200*900mm; 2plate thickness 100/50mm; Mould handle hole dimension: 50*60mm(diameter*depth); Power: 4p, 380v or 220v, 50hz /60hz; Net weight: 10, 500kg.
Specially-designed spiral moulds for pe pipes, with inside oil controlling temperature system. Beautiful and practical stainless steel body for the vacuum calibration and spray cooling system, unique multi-section vacuum system ensures the stable sizing and cooling for pipes; special spray cooling system improves the cooling efficiency; special water position, water temperature system make the machine more intelligent. Hauling-off unit adopts particular pedrail structure, which is easy and convenient for operation; pedrail clamping uses mechanical and pneumatic combining system, which is more reliable. Cutting system adopts saw blades and planetary cutting means; sumping uses hydraulic system, which ensures the smooth cross section; equipped with dust-collecting unit, which ensures the clean working environment. Main technical data: Model emsg-65/30 emsg-90/30 emsg-120/30 emsg-150/30 emsg-120/33 emsg-150/33 Pipe size/mm d16-63 d75-160 d160-315 d200-450 d315-630 d400-800 Screw diameter/mm 65 90 120 150 150 150 L/d 30: 1 30: 1 30: 1 33: 1 33: 1 Capacity/kg/h 80-160 180-220 250-400 500-600 700-900 800-1000 Hauling speed/m/min 0-16 0-10 0-6 0-3 0-2 0-1.5 Cutting means saw blade or non-scrap cutting planetary cutting planetary cutting planetary cutting planetary cutting. Wooden case or other moistureproof packages
I am Beijing Nimble bitumen membrane equipment CO.LT.We are mainly specialized in research,development and manufacture of equipment for bitumen membrane.Our company was established in 1991.It acts as the leading supplier of equipment for bitumen membrane in China, and a newborn force in international equipment industry for bitumen membrane.Beijing Nimble waterproofing membrane Corporation had focused on offering quality goods and on-time service,We can according to customer requirement to produce different types equipment from the small equipment to ten million ©O . Until now, we had served hundreds of customer from more than 10 countries in the world. Our equipment has exported to India,Russia,UKrine,Saudi Arabia ,North Korea,and We have a branch company In India now. ART 1 General information Technical parameters 1Production capacity: annual production of modified bitumen membranes of 3 million Sqm (16 hours/day, 300days/year with two shifts) Reinforcement: Polyester, Glass fibre Modified materials : SBS, APP 4Materials for surface: sand, scraps of stone, PE membrane, aluminum foil, etc. 5Specification of products: Width: 1m, thickness: 2-5mm, length: 7.5 or 10m 6Production speed: 0-20m/min¡£ 7Main workshop: 60¡Á (12-15) ¡Á£¨6-8£©m Labor required 5-7 workers are needed for the whole production line Boiler room: 2workers Modified workshop: 1-2 workers Production workshop: 2-3 workers Utilities Electricity: Alternating current, 380V50Hz60Hz Water Consumption: 2-3 T/D
Pipe marking line is extruded by smaller single screw extruder through the composited extrusion die. Vacuum calibration water tank: it is equipped with two-stage vacuum system(for large diameter)advanced water recycle & high pressure cooling system, vacuum degree adjustment device and accurate water level & water temperature automatical control system. The accurate stannum bronze calibratation sleeve ensures fast cooling speed and molding of pipe. Its material is stainless steel. Spray cooling water tank: Long cooling unit ensures high efficiency cooling, Unique pipeline design shorten cooling length, its material is stainless steel. Haul-off unit: special integral transmission unit avoids asynchrony of individual transmission, Various control method ensures more flexible & accurate orientation, Accurate pressure regulating system makes hauling power adjustable. It has unique structure & flexible operation, its speed can be adjusted by motor inverter. Cutting unit: Full-hydraulic design of cutting unit ensures flexible pressure in state of cutting pipes, Flexible adjust for saw position & cutting depth, Unique power input system ensures high reliability of planetary unit, With ultra silent & enforced sucking system, Unique non-scrap cutting unit enusre clean cutting section for 16mm to 315mm pipe. Control system: Adopts the one of the most advanced plastic extrusion machinery control systems----PLC. It can ensure much higher quality extrusion, PLC system ensures high speed and convenient internet function that much more accurate and flexible control, intelligentized control order make the operation more simple. Packing in film or according to your needs.
The Belt-oil stripper is the most reliable and economical machine to separate oil from surface of fluid which is low-power consumption and without any materials, It can separate any oil slick such as engine oil, kerosene, lubricant, seed fat which is light than water from mixture of water and oil no matter how thick the oil slick is. The oil which separate by the machine can reuse. This machine is very fit for sewage disposal system of oil field , refinery, steel works, electroplate factory, packinghouse, catering industry, sewage treatment works, garage, parking lot, washing-line of metal parts, covered reservoir, scrap wildcat, and so on. 1.Available for sucking oil of 2 um thick. (The visible colorific skimming oil) 2.Consumption is only 40W,it doesn't need any other power consumption. 3.Time control device for 24 hours. 4.The length of steel belt is designer according to the depth of customer's pool. 5.Warranty for 3 years. 6.No wheel in the water,minimize malfunction. SPECIFICATION: Steel belt width: 200mmx0.3mm thick Suction capacity: 150 l/hr Power consumption: 43W Material of steel belt: Stainless steel Infinite speed-adjustment SPECIFICATION: Steel belt width: 100mm0.3mm thick Suction capacity: 75 l/hr Power consumption: 43W Material of steel belt: Stainless steel Infinite speed-adjustment SPECIFICATION: Steel belt width: 50mmx0.2mm thick Suction capacity:40 l/hr Power consumption: 28W Material of steel belt: Stainless steel Infinite speed-adjustment.
It is suitable for thermoplastic moulding process of various molding process, good workability. Colour: White, Grey, Red, Blue HDPE Repro Pellet, Grade: Blow Extrusion Grade Colour: HD White, Blue, Grey, Black MFI: Less than 1 Application: Suitable for making bottles, Jerry can, Drum or other general Extrusion Item. Source: From post Industrial, Commercial bottle scraps. Material is clean and Free for medical, chemical or heavy metal contamination. Quantity: 150mt/month. Other Repro material & colour available: HDPE Injection grade, red, blue, green, MFI: 4 to 10 HDPE Blow grade, white, grey, black PP Injection grade, Red, Blue, Green, Yellow, Black LDPE Film grade, natural, mix-colour, black PP copolymer, black HDPE Pipe Grade black pellet 1. ) Reprocessed PP Injection grade granules, colour red, blue, green, yellow, Clear, white, milky white 2. ) Reprocessed HDPE Injection grade granules, colour, red, blue, green, yellow 3. ) Reprocessed HDPE Blow grade granules, black, natural, white 4. ) Reprocessed HDPE Pipe Grade granules, Black 5. ) Reprocessed PVC pipe grade granules. 6. ) PVC pipe grade regrind, colour Grey, White 7. ) Refined Palm Cooking. 25kg/bag or 50kg/bag.
Product description: The belt-oil stripper is the most reliable and economical machine to separate oil from surface of fluid which is low-power consumption and without any materials, it can separate any oil slick such as engine oil, kerosene, lubricant, seed fat which is light than water from mixture of water and oil no matter how thick the oil slick is. The oil which separate by the machine can reuse. This machine is very fit for sewage disposal system of oil field , refinery, steel works, electroplate factory, packinghouse, catering industry, sewage treatment works, garage, parking lot, washing-line of metal parts, covered reservoir, scrap wildcat, and so on. Characteristics of jf belt style skimmer For floating-oil: 1f=material of steel belt: stainless steel. 2f=the recovery oil that pare off contains less water, easy to use. 3f=adjustable scraper, obtain the best effect. 4f=be able to used under the strong acid and strong alkali environment, surroundings bearable temperature could go beyond 120fª. 5f=the length of steel belt is designer according to the depth of customer's pool. 6f=enable to choose the skimmer type(simple type, stainless type, flameproof type) according to the demand. 7f=time control device for 24 hours. 8f=speed-adjustment motor, magnetic pulley steel belt, adjust the running speed according to oil amount in water.
DN series PET strap auto-production line is a new production line which German deluxe engineer Dr. Peter,Shandong Mechanical Research Center and many technical engineers of my company. My company have five national patents.It has characteristics as follow: 1.The PET strap production line with 4 straps coming out 2. Technologies about Equipments and crafts are new. DN series PET strap auto-production line is a new production line what introduce into Germany technology and equipments, combine crafts and equipments engineers of our company, the practice over a long period of time what tally up and optimize. Weí»ve owned the patent and the intellectual property right. 3. High auto-matization (full-automatic). 4. Recycle plastic. Use green PET bottle scraps to melt in and press out direct, become high intensity,environmental PET straps. Ití»s a popular rotative economy project all over the world. 5. Many specifications only need one machine, saving electricity too (can saving 50%). Elements: use twin-screws press out. Easy operation;2 operators per product line only! 6. Top-quality. We deal our products too, so we make sure our PET straps have an excellent quality,a bright color and a high intensity. 7. Strong technical force. The after-sales service has guarantees absolutely. 8. Sale helping. (We have many foreign customers, We can direct also on china market.) In fine, use DN series PET strap auto-production line can make investment repay more, can shorten the term for invest. negotiations
Pink himalayan rock salt and sea salt, irri 6 rice and fridge ac compressors scrap.
With over 20 years of international experience, AH Machinery supplies a wide range of top-quality machinery made in Taiwan, including Precision Draw Benders, Rotary Draw Bender, Pipe Bending Machines, Draw Bending Machines, Tube Bending Machines. Customized specifications are available to meet your unique needs. /SPECIFICATION/ - Sheet Metal Thickness [mm/inch]= 3/0.12, 4/0.16, 20/0.79, 30/1.18, 50/19.7, 60/2.36 - Sheet Metal O.D. [mm/inch]= 10/0.39, 25/0.98, 30/1.18, 35/1.38, 40/1.57, 50/1.97, 50.8/2 - Sheet Metal Height [mm/inch]= 3/0.12, 6/0.24 - Series= ATB-301 Series - Shape= 1 - 18 Type - For= Light Duty /FEATURES/ #Customized_specifications_are_available. #High_caliber_and_Accurate. /APPLICABLE METERIALS/ Conduit Tubes, Fumiture Iron Pipe, Gas Tubes, Hard Copper & Aluminum, Hydraulic Steel ST35, Mepla, Geberit & Similar Tubes, Mild Steel [EN:S275JO], Soft Brass, Soft Copper, Stainless Steel AISI304-316, Stainless Steel AISI308, Standard Steel Tubes. /FINAL PRODUCTS/ Tubular Frames, Frames for Furniture, Frames for Bicycles, Architectural Components, Handrails, Staircases, Automotive Parts, Exhaust Pipes, Automotive Chassis, Automotive Frames, Industrial Components, Bent Pipes for Conveying Fluids, Bent Pipes for Gases, Custom Fabrications, Structural Elements, Supports, Brace. Welcome to contact us! Contact us today for high-caliber and accurate machinery solutions.
Metallic Wall Hanging Musician Handicraft For Home Decor Wedding Party Use Essential details Place of Origin: Rajasthan, India Brand Name: QOPTUMCRAFTS Model Number: QOPHM001 Material: Other, Iron Occasion: Christmas, Diwali, Father's Day, Easter, Thanksgiving, Chinese New Year, Wedding, New Year, Valentine's Day, April Fool's Day, Halloween, Mother's Day, Earth Day Product Name: Handcraft Hanging Musician Usage: Decor Color: Multi color Type: Antique Style: Traditional MOQ: 50 Unit Technique: Painted Use: Home Decoration OEM/ODM: Acceptable Supply Ability: 1000 Piece/Pieces per Month Packaging Details Export standard packaging and as per buyers requirement & as per as export description. Port Jaipur Port, Delhi Port and Mumbai Port We primarily manufacture and export all Meenakari items, wooden items, glass with metal items, Handmade products, photo frame including Oxidized & Copper Items such as Boxes, Glass with Metal Items, Handmade Paper Items, Marble Painting, Marble Picture, Meenakari Items, Metal Items, Oxidized & Copper Items, Tablas Items, Wooden Items, Wooden Jharokhas, Wooden Pillar and handicrafts, antiques and decorative gift items. We have a well-established global clientele. The most elite and antique works can also be found at our place. Our collection of old colonial style antiques is endless. Features:- >Size- 36 X 12 inches >Decorative Metal >Made in India. >It can be used Indoor Product Type: Eco-Friendly, Made Of Cane, Nature Material Material: Iron Color Multicolored Technics: Handmade Feature: Gifted items for family/friends and others Utility Long lasting Suitable: Indoor like living rooms, balcony, restaurants, resorts, marriage gardens, hotels and office area for attractive and traditional looks. MOQ 50 Size 36 X 12 inches Tag Customized OEM Accepted Payment Terms PayPal, L/C, T/T, Western Union, Credit Card Packaging Details Customized Production Capacity 1000 Pisces / Month
Essential details Place of Origin: Rajasthan, India Brand Name: QOPTUMCRAFTS Model Number: QOPHM005 Material: Other Occasion: Christmas, Father's Day, Easter, Thanksgiving, Chinese New Year, Wedding, New Year, Valentine's Day, April Fool's Day, Halloween, Mother's Day, Earth Day Handmade: Yes Product Name: Handcraft Hanging Musician Usage: Decor Color: Multi color Type: Antique Style: Traditional Indian MOQ: 50 Unit Shape: Rectangle Technique: Casting Use: Home Decoration OEM/ODM: Acceptable We primarily manufacture and export all Meenakari items, wooden items, glass with metal items, Handmade products, photo frame including Oxidized & Copper Items such as Boxes, Glass with Metal Items, Handmade Paper Items, Marble Painting, Marble Picture, Meenakari Items, Metal Items, Oxidized & Copper Items, Tablas Items, Wooden Items, Wooden Jharokhas, Wooden Pillar and handicrafts, antiques and decorative gift items. We have a well-established global clientele. The most elite and antique works can also be found at our place. Our collection of old colonial style antiques is endless. Features:- >Size- 36 X 12 inches >Decorative Metal >Made in India. >It can be used Indoor Product Type: Eco-Friendly, Made Of Cane, Nature Material Material: Iron Color Multicolored Technics: Handmade Feature: Gifted items for family/friends and others Utility Long lasting Suitable Indoor like living rooms, balcony, restaurants, resorts, marriage gardens, hotels and office area for attractive and traditional looks. MOQ 50 Size 36 X 12 inches Tag Customized OEM Accepted Payment Terms PayPal, L/C, T/T, Western Union, Credit Card Packaging Details Customized Production Capacity 1000 Pieces / Month
