Oleoresin like turmeric oleoresin.Produce
USES of GUM ROSIN: Paints Paper, Polish, Phenyl, Explosives, Soap, Cracker, Rubber, Ink, soldering fluxes, Intermediate material for synthetic organic chemicals etc H.S.CODE:3806.10.00 , CAS number : 8005-09-07 PACKING : 240/50 kgs net in New zinc Drum / 25 kgs in pp bag with inner liner Must be kept away from heat and flame Our Rosin is a brittle, transparent, glassy solid , a natural organic compound, mainly composed of resins, possesses chemical activity when dissolved in many organic solvents. NAME OF INDEX type X Tipe WW Color by Lovibond Comparitor SLIGHTLY YELLOW YELLOW Appearance Transparent Solid Transparent Solid Softening point ( Ring & Ball Method) Min 78o c Min 77.5 o C. Impurity /Solubility in Toluen Max 0.05 % Max 0.05 % Acid Value 160-190 160-190 Saponification Value 170-220 170-220 Iodine value 5-25 5-25 Ash Content
Gum Resin Bombay With Excellent quality Clean Very low dust Packaging in double sack We produce Bombay, Calcutta and Powder We can produce 4-6 container per month Payment: Open LC Full
The use of resin to extract and separate rare earth elements is one of the commonly used methods. This method has the characteristics of fast adsorption rate, high adsorption rate, convenient desorption, and is not easy to be fouled by organic matter in the solution. It is suitable for the extraction of rare earth elements with complex properties, and can effectively improve the production capacity. The scandium extraction resin produced by Jiangsu Kingshan New Material Co., Ltd. has the characteristics of high adsorption rate, strong selectivity, easy analysis and regeneration, good mechanical and chemical properties, wear resistance, and is not easy to be polluted by organic matter, and is widely used.
SPSi-100 is a high performance matrix resin product used for tin-free self-polishing paint, it is only suitable for copper-containing formulations and can be blended with various amounts of CDP (Rosin) to satisfy different application requirements. The tin-free self-polishing antifouling coatings prepared by SPSi-100 could possess 4-5 years performance (the actual antifouling performance determined by paint formulation, ships speed & activity and sailing sea area environment), low VOC and excellent polishing rate. Use: for anti fouling marine paints Packing:190kg drum Storage: in a shady, dry and ventilated place, avoid high temperature and fire contact.details pls refer to MSDS. Supplier: WUXI HONOR SHINE CHEMICAL CO .LTD
SPZn-100 is an economical matrix resin product used for tin-free self-polishing paint, it is only suitable for copper-containing formulations and must be blended with CDP (Rosin). The tin-free self-polishing antifouling coatings prepared by SPZn-100 could possess 3 years performance (the actual antifouling performance determined by paint formulation, ships speed & activity and sailing sea area environment), low VOC and steady polishing rate.
Ion exchange resin for water treatment Gel type strong acid cation exchange resin is used in water demineralization SCG08 is a premium grade Gel type strong acid cation exchange resin, with crosslinking 8% DVB , which is produced by sulfonated styrene-DVB copolymer. The particle size is in standard gaussian distribution with 0.315-1.25mm >95%. SCG08 shows a better oxidative stability and a better regeneration efficiency than SCG07, so SCG08 in hydrogen form is intended for demineralization use in mixed beds. Equal to Amberlite IR120h, Purolite C100 Basic feature Application:Mixed bed system for water demineralization Matrix:ST-DVB Type: Gel Functional group:sulphonic acid Ionic form: hydrogen & sodium form Appearance:amber Spherical beads Physical and Chemical Characteristics 1 Total exchange capacity (eq/L) Na+ form â?¥1.9 2 Moisture retention (%) Na+ form 47-56 3 Particle size range (%) 0.315-1.25 mm â?¥95 4 Whole beads count (%) â?¥95 5 Shipping weight (g/ml) Na+ form 0.75-0.85 6 Specific gravity (g/ml) Na+ form 1.15-1.24 7 Uniformity coefficient
Overview Quick Details CAS No.: 0 Other Names: Light curing resin MF: 0 EINECS No.: KS-3854 Place of Origin: Guangdong, China Type: Synthetic Resin And Plastics Brand Name: KS Model Number: KS-3854 Purity: 0 Color: Transparent Weight: 1000g Material: UV resin Liquid Density: 85D Viscosity (25�°C) (cps): 300 Wavelength: 395-405 Curing time: 3-5s Shrinkage: 100 Est. Time(days) 5 To be negotiated Video Description 00:00 02:21 Product Description Brand Name/Model No. KS-3854 Color Transparent Weight 1000g Material UV resin Hardness Shore D 85D Viscosity (25�°C) (cps) 300 Liquid Density 1.08-1.2 Elongation at Break % 25% Wavelength (nm) 395-405 Curing time (s) 3-5s Shrinkage %
Fsp series pentaerythritol ester is made by rosin or modified rosin through esterification, esters, stabilized and made of light color, low odor, strong stability of a series of tackifying resin. Itemfsp95fsp95afsp100fsp100afsp105fsp110fsp115fsp120 Color (gardner color 50% toluene solution)2-42-42-42-40-12-40-1.52-5 Softening point ?95-10095-10098-10399-106100-106100-106108-116108-116 Acid value (mgkoh/g)¤30¤30¤3030-40¤30¤30¤30¤30 Melt viscosity (150?) centipoise 600-1800600-18001000-25001000-25001500-30002000-50002500-60004000-16000 Ash content %¤0.10.10.10.10.10.10.10.1 Relative density (20?)0.031.061.061.061.061.061.061.061.06 Flash poin240240240240250250260260 Application: used in hot melt adhesive, pressure sensitive adhesive, film adhesive, plastic, such as adhesive glue stick, colloidal particles, such as sanitary napkin glue, adhesive, adhesive tape, glue, wood glue, etc.; can also be used for coating products. Product feature: light color, low odor, good heat tolerance, can improve adhesion of hot melt pressure sensitive adhesive, and can mix with a variety of polymers such as eva, eaa, nr, sbs, sis , soluble in toluene, xylene, ethyl acetate, acetone, petroleum ether, vegetable oils, and other organic solvents. Package: 25kg net in pe bag or paper bag Safety attention: waterproof, fireproof, away from flammable item and peroxides. Remarks: can produce according to customer?s specific requirement or method.
Fsr series resin is specially design for road painting. Itemfsr95fsr100fsr100afsr100bfsr105fsr110fsr125 Softening point ?95-10097-10397-10397-103102-108107-113123-128 Color ( gardner color 50% toluene solution)¤4¤4¤4¤4¤4¤4¤6 Acid value (mgkoh/g)¤20202020202030-40 Relative density (20?0.031.061.061.061.061.061.061.06 Ash content %¤0.20.20.20.20.20.20.20 Flash point ?230230230230240240260 Application: mainly use for hot-melt road-marking paint. Product feature: using this series of road marking paint resin has resistance pressure, wear, anti-pollution and moderate leveling property, strong coating adhesion, fast dry speed, excellent anti-yellow variable, resistance aging performance and tg performance, the advantage of tra products is fast dry, and not stick dirty, good gloss degrees and color ; dissolved in variety organic solvent , such as toluene, xylene, oil ether, ethyl acetate, acetone, and vegetable oil. Package: 25kg net in pe bag or paper bag. Safety attention: waterproof, fireproof, away from flammable item and peroxides. Remarks: can produce according to customer?s specific requirement or method.
Tc100/ copolymerized hydrocarbon resin is produced with and fraction, which has and strengths.It can replace the expensive c5 hydrocarbon resin in hot melt adhesive and rubber tire fields. In rubber tires, tc100 hydrocarbon resin not only can increase the adhesive force between colloidal particles, but also can enhance the adhesion between the particle and the cord thread.Tc100 hydrocarbon resin is suitable for producing high quality rubber products. In adhesive, tc100 hydrocarbon resin have better initial adhesion and it also can adjust the adhesive, s durability and bonding strength. Product specification: Itemtest methodunitspecification range Softening pointastm-e28-58 , 95-105 Colorastm-d-1544gc4max Insolubleetm-e-99vol%0.05max Acid valueastm-d-974vol%0.2max Specific gravityastm-d-71-72ag/0.99-1.03 Features of tc100 c5/c9 copolymerized hydrocarbon resin: Wide optional range.It will be more stabilized by the addition of antioxidant.Good compatibility with eva, sis and sbs etc. Applications:hot melt adhesive, synthetic rubber Package: 25kg kraft paper bag Storage: All resins with low softening point present a risk of solidifying or lump. For softening point less or equal to 110, , we suggest you keep resin in a cool (25, max) ventilated place and avoid direct sunshine.
Epoxy Resin is an organic compound containing two or more epoxy groups in a molecule. The cured epoxy resin has good physical and chemical properties, which has excellent bonding strength on the surface of the metal and nonmetal material. Besides, due to its good dielectric properties, good stability, high hardness, good flexibility, stable solubility in alkali, it is widely used as pouring, impregnation, laminated materials, adhesives, coatings and other purposes in national defense, national economy departments.
Bare flat aluminium wire is wire made by oil-free electrician round aluminum rod, electrician flat aluminium wire by continuous extrusionhas advantages of fine surface, burr-free,low resistivity. It can be used as finished product and intermediate product. It is widely used in motor, transformer, electric welder and other similar equipment.
Long alkyd 160x is a high viscosity resin. Gives good color, radiant gloss, excellent brush-ability, and rapid set and through drying. Long alkyd 160x, is soya bean oil, yellowing resistance, high brush ability, excellent pigment wetting, high gloss retention, good adhesive and mechanical properties. Suggested in decorative enamel paints for internal and external applications. Solids% (+1-1)60 - solventwhite spirit, oil typesoya bean oil, oil length55 Color gardener - hellige3 max. 50% in white spirit , viscosity (gardener hotdt a 2)z3-z5, acid value (on solids)
Maleic acid resin series also named as glyceride maleic anhydride resin, after the reaction with maleic anhydride esterification and made of transparent resin. Itemfsm100fsm110fsm125fsm130fsm130l Softening point 97-103107-113122-128127-133127-133 Color (gardner color 50% toluene solution)2-43-54-64-73-4 Acid value (mgkoh/g)3030303030 Relative density (200.031.061.061.061.061.06 Ash content 0.20.20.20.20.2 Flash point 260260260260260 Application: this product can be applied to the ester gum, phenolic paint. The polyester, nitrocellulose and polyurethane paints can improve the film hardness, brightness, fullness, also used for hot-melt adhesives and inks. Product feature: soluble in coal fuel, ester, vegetable oil, turpentine and other solvents, insoluble in alcohol, with a light color, yellowing resistance, aging resistance and strong adhesion characteristics. Package : 25kg net in pe bag or paper bag. Safety attention : waterproof, fireproof, away from flammable item and peroxides. Remarks: can produce according to customers specific requirement or method.
1- liquid resin with polyurethane and acrylic 2- colorness and clear, one component, do not match any catalyst before fill 3- curing under sunshine or uv lamps 4- certificates: en 356 p3a p7b, en 12543-4, en 12600, en 1063 br6, sgs and msds 5- application: flat laminated glass, curved laminated glass, decorate glass, digital smart glass. 6- self-life: 18 month 7- sample: 2kg/pail 8- standard: 25kg/pail, 200kg/drum 9- payment: tt, lc, dp, western union, swift -
1- liquid resin with polyurethane and acrylic 2- colorness and clear, one component, do not match any catalyst before fill 3- curing under sunshine or uv lamps 4- certificates: en 356 p3a p7b, en 12543-4, en 12600, en 1063 br6, sgs and msds 5- application: flat laminated glass, curved laminated glass, decorate glass, digital smart glass. 6- self-life: 18 month 7- sample: 2kg/pail 8- standard: 25kg/pail, 200kg/drum 9- payment: tt, lc, dp, western union, swift -
1- UV curable resin for laminated safety glass 2- Liquid transparency with polyurethane and acrylic 3- Curable under sunshine or UV lamps 4- Certificates EN 1063 BR6, EN 356 P3A P7B, EN 12543-4, EN 12600, SGS, MSDS 5- Packages: 2kg, 25kg, 200kg 6- Delivery: 5 business days
Resins characters: Â?¢light colored and transparent granule Â?¢applied in tyre rubber compounding, which have an excellent compatibility with a wide variety of elastomers including natural rubber (nr), synthetic rubber, polyethylene, polypropylene, styrene-isoprene-styrene (sis), styrene-ethylene-butadiene-styrene (sebs) and ethylene vinyl acetate (eva), and also have a good compatibility with the natural sticky resins (such as terpene, rosin and thereof derivatives). Additionally, the product can be used in rubber compounding as tackifier agent, reinforcement agent, softening agent as well as the filling agent, etc. Â?¢excellent stickiness property. Â?¢has a good softening and reinforcement properties in rubber mixing process, can enhance the ductility and peel resistance of rubber compounding. Â?¢can improve the stickiness of raw rubber, without effecting the curing time and cured property of rubber compounding. Â?¢.Avoiding the sticky problem to rubber processing machines. Â?¢contributes to a uniform dispersion of filler material in rubber compounding. Application: Rubber industry, tyre industry
The presintered resin is suitable for continuously extruding of all type, pushing and pressing ptfe rod, tube and other shape products..