HK-CA200/200V is one kind of ASME air receiver tank with 200Gallon capacity and 200PSI Max operate work pressure. This air receiver tank is designed in accordance with ASME VIII SEC I. At the same time,all the documents and fabricating process are governed by SGS which is the authorized inspector by ASME organization and print U-stamp on the nameplate after finishing the farication. The mainly material of HK-CA200/200V is SA-414-G such as the 2:1 Elliptical Head and Shell. The NPT nozzles are made of SA-105M.The tank sets up pressure gauge,drain valve,relief valve aslo as the neccessary connect nozzle. The air receiver tank acts an important component in the air compressed systerm.Not only to make the air more cleaner,reduce the air temperature but also can buffer and surge the pressure impulse from the air compressor to protect other tools and equipment. So you can see how important to choose a reliable and safty air receiver tanks for your systerm. The more safty,the better. HK-CA200/200V is also available for CRN,DOSH,PED,MOM certificates if customers require.
Investment casting is one of the oldest manufacturing processes.Investment casting process was used mainly to reproduce metal parts and to reduce the time and labor needed for producing parts in quantity by metal smiths. Since then modern technology has made the metal smith basically extinct. The mould is made by making a pattern using wax or some other material that can be melted away. This wax pattern is dipped in refractory slurry and covered with stucco, which coats the wax pattern and forms a skin. This is dried and the process of dipping in the slurry, stuccoing and drying is repeated until a robust thickness is achieved.After this, the entire mould is placed in an oven and the wax is melted away. This leads to a mould cavity that can be filled with the molten metal. Check investment casting vs sand casting to learn more about investment casting... Due to the advantages of investment casting, it can be used to make parts that cannot be produced by normal manufacturing techniques, such as turbine compressor blades that have complex shapes, or airplane parts that have to withstand high temperatures.
Specifications ceiling mounted dehumidifier Optional refrigerant. one year warranty OEM and ODM available 20L/D ceiling mounted dehumidifier with CE and Rohs certificate with wooden box packing Features: 1. Adopt imported famous brand compressor, high efficiency and stable. 2. Adopt quality inner grooved copper tube and high efficient hydrophilic Aluminum film. 3. Real time humidity display, free setting and control. 4. Controlled by timer or humidity. 5. Failure alarming and self-protection. 6. The machine can connect with air hose or new air hose of central air conditioning directly. Parameter: Model:HK-20G Humidity Removal:20L/D Power Source:220V/50HZ Rated Power Input:400W Rated Power Current:2.5A Circulating Air:450m3/h Water tank:10L Work Temperature:5-38oC Product dimension:545*375*200mm Packing dimension:600*440*295mm Refrigerant:R134a Net Weight:18Kg Gross Weight:20Kg Applying Space:10~25m2 Service: 1. one year warranty. 2.24 hours service line. 3.cheap spare parts after one year. 4.OEM & ODM available.
Quick Details Type: Refrigerative Dehumidifier Dehumidifying Technology: Compressor Function: Adjustable Humidistat, Auto Restart, Automatic Defrost, Automatic Humidistat Control, External Drain Connect, LED Display, Washable Air Filter Certification: CB, CE, RoHS, SASO Capacity (pints / 24h): 21.12 Coverage Area (sq. ft.): 322 Dimensions (L x W x H (Inches): 11*6.7*19 Fan Speed: 2 Power (W): 230 Voltage (V): 220 Water Tank Capacity (l): 1.5 Working Temperature Range: 5-38 ° C Place of Origin: Zhejiang, China (Mainland) Brand Name: CONLOON Model Number: DH-512C color: white or optional Product name: home dehumidfier Material: ABS Plastic Voltage: 220V/50Hz 110V/60Hz Certificate: CCC,CE, Rohs Net Weight: 10kg Gross Weight: 11.5kg Applied Area: 15-30M2 Refrigerant: R134a Handle: pull up handle Packaging & Delivery Packaging Details:standard export package, foam inside and carton outside. also you can choose wooden boxes package or pallet. Delivery Detail:10 days
The Vanta analyzer is our most advanced handheld X-ray fluorescence (XRF) device and provides rapid, accurate element analysis and alloy identification to customers who demand laboratory-quality results in the field. Vanta handheld XRF analyzers are built to be tough. Their rugged and durable design makes them resistant to damage for greater uptime and a lower cost of ownership. The Vanta Element XRF analyzer series has the performance and portability you need for fast scrap sorting or metal ID. Both the Vanta Element and Vanta Element-S models offer fast grade identification with clear on-screen grade comparisons for easy operation when testing metals. The new Vanta Element-S handheld X-ray fluorescence (XRF) analyzer delivers fast light element detection at an affordable price, joining a family of cost-effective, entry-level Vanta Element XRF instruments. The S model is equipped with a silicon drift detector (SDD) to analyze light elements like magnesium (Mg), aluminum (Al), silicon (Si), sulfur (S) and phosphorus (P) in alloys. Ideal for scrap recycling, basic PMI, metal manufacturing and precious metals, the Vanta Element-S effectively measures ferrous metals, aluminum, copper, stainless steel, nickel and gold karats. The analyzer offers clear on-screen grade ID and comparison for the light elements Mg, Al and Si in seconds. Its SDD detector can distinguish similar alloy grades like 303 stainless steel from 304, and aluminum 6061 or 6063 from 1100. Vanta Element-S analyzers come with the essential features the Vanta series is known for: speed, reliability, ruggedness, connectivity and smartphone-like ease of use. Weighing a slim 2.9 lb. (1.32 kg), the analyzer is up to the challenge of all-day testing for alloy and metal analysis. Powered by Olympus proven Axon Technology, the S model brings the same high-count rate and stability as the rest of the Vanta series for fast results and ROI.
We are a used Tires and used Tires Scrap wholesaler in Germany. We are capable of producing 40000 tons of used car Tyre per year. We are ready to supply these Tyre in Bales which is to be shipped in one 40 FT HC container that can hold about 26 to 27 Tons. origin German Our experience as exporter of used tires in Germany goes back to 2012. All our secondhand car tires are well examined by sight and are in perfect condition. All tires are directly examined according to our high-quality standard at our suppliers in Germany. All part worn tires we sell are well inspected. We pick up old tires, arrange and mark all tires accordingly to the qualities we offer and sell only those tires and casings which are good for further use. Our quality standard is described in our price list. All used tires and casings are graded according to the needs of the buyers in the different tire markets worldwide. Our warehouse is located near Frankfurt am Main/Germany Please visit us in our warehouse after you have sent us a tire export inquiry AND we both agreed to start a profitable mutual business together. That means: We would like to invite costumers for secondhand tires to visit our warehouse in Germany which are able to buy one of the tire mixtures/compositions/ contingents we offer. We are very sorry, though, at present, it is impossible for us to invite everybody. Payment / Shipment Terms -30% in advance rest at Arrival Port Used Car tire 4mm to 8mm mixture from 10 Dollar to 16 Dollar Per Piece car used tires scrap Selling price $ 40/Ton all prices are Ex-works Warehouse Germany
Double shaft shredder have been designed for a wide array of applications and industries, suitable for shredding solid material such as E-waste, metal, wood, plastic, scrap tires, packaging barrel. Pallets, etc. And particularly well suited to the size reduction of bulky or voluminous materials which could include contamination such as metals or stones. Depending on input material and the following process the shredded material can be used directly or go into the next step of size reduction. Double shaft shredder have been designed for a wide array of applications and industries, suitable for shredding solid material such as E-waste, metal, wood, plastic, scrap tires, packaging barrel. Pallets, etc. And particularly well suited to the size reduction of bulky or voluminous materials which could include contamination such as metals or stones. Depending on input material and the following process the shredded material can be used directly or go into the next step of size reduction. It can efficient to increase the bulk density and decrease the transportation cost. It is widely used in industry waste recycling, medical recycling, electronic recycling, pallet recycling, municipal solid waste recycling, plastic recycling, tire recycling, paper making industry, etc. Double Shaft Shredder has two rotors built into the machine that rotate at low speeds, high torque and low noise. With the function of Siemens microcomputer control system, it is possible to control automatically start, stop. Automatic reverse sensors to protect the machine against over loading and jamming. Our service: (1) Your inquiry related to our products or prices will be replied in 24hours. (2) Our engineer will make machine placement chart according to clients workshop chart. (3) We provide 12 months guarantee since the date of bill of loading. All products are passed strict test. We specialize in this crusher and environment-protection field many year. with best quality, best service and competitive price,
Double shaft shredder have been designed for a wide array of applications and industries, suitable for shredding solid material such as E-waste, metal, wood, plastic, scrap tires, packaging barrel. Pallets, etc. And particularly well suited to the size reduction of bulky or voluminous materials which could include contamination such as metals or stones. Depending on input material and the following process the shredded material can be used directly or go into the next step of size reduction. Double shaft shredder have been designed for a wide array of applications and industries, suitable for shredding solid material such as E-waste, metal, wood, plastic, scrap tires, packaging barrel. Pallets, etc. And particularly well suited to the size reduction of bulky or voluminous materials which could include contamination such as metals or stones. Depending on input material and the following process the shredded material can be used directly or go into the next step of size reduction. It can efficient to increase the bulk density and decrease the transportation cost. It is widely used in industry waste recycling, medical recycling, electronic recycling, pallet recycling, municipal solid waste recycling, plastic recycling, tire recycling, paper making industry, etc. Double Shaft Shredder has two rotors built into the machine that rotate at low speeds, high torque and low noise. With the function of Siemens microcomputer control system, it is possible to control automatically start, stop. Automatic reverse sensors to protect the machine against over loading and jamming. Our service: (1) Your inquiry related to our products or prices will be replied in 24hours. (2) Our engineer will make machine placement chart according to clients workshop chart. (3) We provide 12 months guarantee since the date of bill of loading. All products are passed strict test. We specialize in this crusher and environment-protection field many year. with best quality, best service and competitive price,
The main characteristics is a superior wear resistance: Severe wear on the surface has a work-hardening effect on the austenitic structure of this steel. This, when combined with the level of carbon in accordance with the international standards, leads to an increase in hardness from 200BHN (in as delivered plates) up to an in-service hardness of at least 600BHN. Typical Applications: · Quarries and Constructions: Earth moving crusher jaw, grizzly, screen, stone chutes, chain guide and shredder plates, shovel buckets. · Mines: Bucket blade of loader, chain conveyor parts, sprocket wheel, various armouring elements. · Iron Industry, Foundry: Guiding and shifting plates, scraps container, liner of shot blasting unit, pedestal liner, flanged bolster cup, wear liner. · Concrete and Brickworks: Core and dividing wall of parpen mould, grinding mill scraper, mixer paddle. · Scraps â?? Recoveries: Wheel disk, striker and hammer mill. · Automotive Industries: Shot blasting equipment. It is also used for its low coefficient of friction in metal-to-metal applications, its non-magnetic properties in electrical transformer assemblies and for industrial lifting magnets. A high manganese, fully austenitic, quench annealed, non magnetic, work-hardening steel with an exceptionally high level of wear resistance when subjected to work-hardening by shock or high impact pressure in service. The main characteristics is a superior wear resistance: Severe wear on the surface has a work-hardening effect on the austenitic structure of this steel. This, when combined with the level of carbon in accordance with the international standards, leads to an increase in hardness from 200BHN (in as delivered plate) up to an in-service hardness of at least 600BHN. This work-hardening capability renews itself through out in-service life.The underlayers not work-hardened maintain an excellent resistance to shock and a very high ductility.
There are tin foils in many places in life, such as chewing gum, chocolates, and over-the-counter packaging. They all have a certain aluminum content, and recycling of these wastes will result in a lot of metal aluminum resources. Since aluminum and aluminum alloys have good ductility, their use in life is very broad. So how can these aluminum-plastic composites be completely separated into aluminum and plastic? Dongying Group gave a perfect answer - Aluminium-plastic separation equipment refers to equipment that completely separates aluminum-plastic composites into aluminum and plastic. The equipment is suitable for handling scrap and waste of various pharmaceutical factories, aluminum-plastic board factories, food and beverage factories and other aluminum foil packaging industries. For example, used bags, capsules, toothpaste, wow bottles. Aluminum plastic bags, candy bags, tea packaging, and decorative aluminum-plastic plates. The aluminum scraps can be smelted by the recycled aluminum foil in the equipment, which is the finest raw material for the silver powder factory, the fireworks factory, and the aluminum factory (trained into aluminum ingots); the PVC plastic can be pressed into pieces, and the tube can be used for packaging and conveying pipelines. Great potential. The main advantages of Dongying Group's aluminum-plastic separators are as follows: 1. Complete dry physical separation will not cause secondary environmental pollution. 2. The separation rate of aluminum plastic is as high as 99%, with good social and economic benefits.
Brief Introductions: Type: Sol Gel Grinding wheel Abrasive Material: ceramic aluminum oxide Application: cast iron, carbon steels, alloy steels, and tool steels, roller bearings, cylinders, compressor parts, gear parts, hydraulic and pneumatic cylinders etc. Specification: Customized Trade Terms: FOB Packages: Hard carton Delivery Time: 15 workdays by express Sol Gel Grinding Wheel Ceramic abrasives prepared by sol-gel method is a kind of sintered abrasive, grain size is tiny, only 100- 500nm. SG abrasive is high purity, ceramic aluminum oxide abrasive with a submicron crystalline structure deprived from a seeded gel sintering process. The parameters of Ceramic abrasives: Main chemical composition (Typical value) Physical properties (Grain size 60) The offer able grain size code Al2O3 (99.22%) Na2O (0.08%) Density : 3.90(g/cm Bulk density : 1.82(g/cm Crystal size : 0.15 ( 24-180 s Applications of Moresuperhard s Sol Gel Grinding Wheel Precision grinding for unhardened and hardened steels, such as cast iron, carbon steels, alloy steels, and tool steels, etc. Internal grinding roller bearings, cylinders, compressor parts, gear parts, hydraulic and pneumatic cylinders etc. Grinding the crankshaft and camshaft of the engine and transmission of the car; worm gear grinding. Detailed Specifications can be customized! Provide after-sales service Answering questions about usage Return and exchange of products for non-human reasons Advantages of Moresuperhards Sol Gel Grinding Wheel Grinding wheel made of ceramic abrasive with has a higher durability and longer life, which is 5-10 times than the grinding wheel made of common corundum. Sharp grains, good cutting ability, and high grinding efficiency. Good self- sharp ability, microcrystalline structure Benefits. Very good cutting capability, sharp grains. High removal rate extended wheel life a professional manufacturer of grinding, cutting, polishing and dressing tools. Thanks to abundant experience in surface treatment, we design and offer a complete grinding and dressing solution to our customers in various industries. With innovative and creative development conception, tirelessly striving to provide excellent design, superior quality and perfect service to world-wide customers. More than 1000+ customers benefit from our professional technical services.
This machine build with UniSmartcut technology of laser cutting and smart digital control system. With this laser cutting machines, the depth of cut can be accurately controlled, making them ideal for creating die cutting boards, usually MDF board for this purpose can be laser cut into any shape to show any design, the max. cutting deepth is 200mm. Features 1. UL-D series equipped with high quality CO2 laser tube, special design optical path processing & transmission system and moving parts driven by DSP digital control system to get high quality processing solution, which will not damage processing material. 2. Due to the stable optical path design, the cutting power will not be effected by optical route distance, this technologies could ensure the same cutting aperture within processing area. 3. Professional laser cutting software, powerful function built-in, friendly human-computer interface, easy operating, it is also suitable for CAD/CAM auto-programming and optimize typeset collocation. 4. Standard industrial computer configuration, high speed analog input and output & digital input and output module. 5. To make sure die board laser cutting machine reliable operation, this machine apply non-oil air compressor, refrigerated air dryer, high precision filter, exhaust fan. Applicable Materials Wood & Plywood & M DF. Above includes materials commonly processed by laser, for questions on other materials please contact an applications specialist. Technical Specification Product Model UL-D Series Laser type CO2 laser, Safety Class 4 Laser Power 300-400W Cutting Area(mm) 1200*1200 Max. working clamp area(mm) 2440X1200 Laser power adjustable 0-100% by manual or automatic (it can be setup in software and hardware) Max. cutting speed 0.8m/min (upon different materials) Cooling Water-cooling Positioning accuracy 0.03mm Data format AI, BMP, PLT, DXF Working voltage AC110/220V±10% Software Unikonex professional software Option Non-oil air compressor, refrigerated air dryer, high precision filter, exhaust fan and etc.
Chicken Moq- 540 Mt /month in 12-month contract
Egyptian mango Fresh new shelves 2023 Per ton 1230 $ We are in fair import export Guarantee for the quality and sorting
Origin: Brazil or Worldwide Payment terms: L/C or SBLC, payment release at Loading port Moq: 12500 Mt/month in a 12-month contract Price: CIF Conditions required by us: Verbally agreed on all the buying terms before the intended buyer submits the Letter of Intent to our company. Below is the normal procedure required from the intended buyer to avoid unnecessary paperwork or window-shopping buyer or agent.
Origin: BRF Payment terms: L/C or SBLC, payment release at Loading port MOQ: 540 Mt/month or 20 Ctns /month in a 12-month contract Price: CIF
Origin: Europe Payment terms: L/C or SBLC, payment release at Loading port MOQ: 5000 mt/per order/month in a 12-month contract Price: CIF Conditions required by us: Verbally agreed on all the buying terms before the intended buyer submits the Letter of Intent to our company
Origin: Europe Payment terms: L/C or SBLC, payment release at Loading port MOQ: 5000 mt/per order/month in a 12-month contract Price: CIF Conditions required by us: Verbally agreed on all the buying terms before the intended buyer submits the Letter of Intent to our company. Below is the normal procedure required from the intended buyer to avoid unnecessary paperwork or window-shopping buyer or agent
Potatoes: Grade A , Size 40+ , Spunta Kara Diamond ORIGIN: EGYPT PAYMENT TERMS: L/C AT SIGHT, TT PRICE: us290 ex work price Moq: 25 Mt
Grade A Sizes 50+ Packing 25 kilo mesh bag Price 485$ MT Ex Work
