WJWAX offers Livestock&Poultry Defeathering wax (Abbreviated as Duck wax), which is green, non-toxic, and completely devoid of rosin. Duck wax can be used for plucking and hair removal of poultry such as chickens, ducks, geese, rabbits, etc. This poultry wax has the advantages of no irritating odor, low melting point (58-62 â??), low loss rate, strong adhesion, high hair removal rate, and can be reused. "Duck wax" refers to a type of wax that is used in the process of plucking the plumelets (down feathers) of poultry, particularly ducks. It is a specialized wax that helps facilitate the removal of small feathers during the feather plucking process. When heated, the wax is applied to the bird's skin, and as it cools and solidifies, it adheres to the plumelets. This allows for easier and more efficient removal of the feathers, minimizing damage to the bird's skin. The wax acts as a temporary adhesive, providing a grip on the feathers, making them easier to pull out without causing excessive pain or discomfort to the bird. After plucking, the solidified wax and feathers are typically removed together, leaving the bird's skin clean and ready for further processing. Duck wax is specifically formulated for this purpose and is often made from a blend of waxes, including paraffin wax, microcrystalline wax, and other additives that provide the desired properties of adhesion, flexibility, and easy removal. What is the composition of poultry hair removal wax? Poultry wax is composed of paraffin wax, soft wax, microcrystalline wax, and various additives that meet hygiene standards such as viscosity enhancers, viscosity regulators, fluxes, antioxidants, etc. are added during the manufacturing process. It has the characteristics of no irritating odor, low melting point, low loss rate, strong adhesion, high hair removal rate, and can be reused. The application of Duck wax? Duck wax is a new product developed to assist in shedding small hairs during poultry slaughter. It replaces rosin hair removal and is suitable for removing hair from duck, goose, and pig scalp.
The HMLH678 feed pellet maker is one of the indispensable pieces of equipment in the feed mill plant. It can be used alone or in the feed pellet production line. The feed pellet maker machine can make various animal feeds: Poultry feed, such as chicken feed, duck feed, goose feed, and bird feed; livestock feed, such as horse feed, pig feed Feed, and rabbit feed; ruminant feed, such as cattle feed, sheep feed, camel feed, etc. Herm machinery big capacity good price HMLH678 feed pellet maker is high precision gear drive ring die feed pellet machine, this machine has stainless steel conditioner, with frequency speed control, use â??SKFâ?? high-quality bearing, ensure high-efficiency, stable and low noise drive, can work alone with its electric cabinet. It can be used in all kinds of large and middle farms to make feed pellets to feed animals, for raw materials, it can be grain, such as wheat, corn, maize, etc., and some grass, and straw also can be applied to this machine, has a very broad application.
Starting a poultry feed processing plant has always been a profitable business in many countries. Poultry feed plant specializes in producing duck feed, goose feed, chicken feed, bird feed, parrot feed, and other poultry feed, etc. How to make poultry feed? You need a poultry feed pellet production line first. Our fully automatic poultry feed mill plant with output ranging from 1ton/h-100ton/h. The complete poultry feed pellet production line includes raw material storage, a washing machine, a feed crusher, a feed mixer, a poultry feed pelleting machine, a cooler, a screening machine, a packaging system, transportation, and electronic control system. The poultry feeds pellet plant has good raw material versatility and can be used for the granulation of various raw materials such as corn, sorghum, wheat, beans, and oilseed meal. At the same time, the poultry feed production plant has the characteristics of low energy consumption, high production efficiency, and large profits. It is especially suitable for large feed mills, breeding farms, large farms, etc. At the same time, we provide free installation, training, factory design, and timely after-sales service.
Our 3-4 tons/hour feed pellet production line is suitable for processing various animal feeds, such as chicken feed, poultry feed, goose feed, livestock feed, sheep feed, pig feed, cattle feed, camel feed as well as horse feed, goat feed, fish feed, shrimp feed, crab feed, aquatic feed, etc. The main equipment of a complete 3-4tons per hour feed pellet mill includes a hammer mill, a feed pellet machine, a feed mixer, a countercurrent feed pellet cooling machine, a feed pelletizer, a pulse dust collector, a vibrating screen, a bagging machine, etc. This complete set of feed pellet equipment can complete raw material mixing, conveying, feeding, and pelletizing. After the raw materials become feed pellets, they are cooled and packed into bags by the following equipment. The raw materials of the feed pellet production line have good versatility and can be used for pelletizing various raw materials such as corn, sorghum, wheat, beans, and oil meal. At the same time, animal feed production plants have the characteristics of low energy consumption, high production efficiency, and large profits. Especially suitable for large feed mills, farms, large farms, etc. At the same time, free installation, training, plant design, and timely after-sales service are provided.
X8000 Series Load Modules Network Testing Equipment Network Test Modules X8000 series test modules are high-performance professional load modules running on TestStorm series and support all the features of TestStorm platform. X6000 Series deliver complete wire-speed traffic test and protocol emulation for network equipment and network systems to meet the testing requirements in each stage of R & D, experiment and qualit X8000 series test modules are high-performance professional load modules running on TestStorm series and support all the features of TestStorm platform. X6000 Series deliver complete wire-speed traffic test and protocol emulation for network equipment and network systems to meet the testing requirements in each stage of R & D, experiment and quality control. X8000 series test modules support up to 8 x 10G COMBO ports and support Cross-chassis synchronizing to provide large-scale protocol emulation, performance test and mass traffic stress test of Layer 2-7 network device. X8000 series modules support TeleExplorer, TeleAPP to meet different test needs. TeleExplorer is a standard test suite providing L2-7 test functions with powerful and flexible configuration. TeleAPP is a test suite to provide automated test of RFC2544 /2889/3918 with easy-to-use configuration and necessary test report output. X6000 also support TCL and API to meet customized testing requirements. SPECIFICATIONS Model X8004F X8002F Port Number 4 * 10G 2 * 10G Port Rate SFP+ 10G SFP+ 10G Physical Status Indicators: Tx/Rx Weight: 0.5kg Size: 271mm x 35.5mm x 180mm Peak power requirement: 100W Max Traffic Generation Traffic generating based on port and stream, per port have 256 different streams Each stream provide up to 4 saltus step domain with mode of increase, decrease and random Accurate data rate regulation based on port and stream, support dynamic data rate regulation based on port Each stream is capable of generating packets of Layer2, IPv4, IPv6, TCP, UDP, TCP-IPv6, UDP-IPv6, ICMPv4, ICMPv6, IGMPv2, ARP, Pause, Goose and custom Each stream support multiple levels of VLAN and MPLS Signature block is optional in each stream Each stream supports user-defined packets and packet length from 60B to 16KB Payload generation mode: Cycle, Incremented, Random Traffic Statistics Statistics results can be displayed in the form of data table and chart Each port can receive up to 1024 streams Traffic statistics based on streams: TX/RX frame count, TX/RX rate count, RX frame Sequence miss count, RX frame IP payload check errors count, Maximum, minimum and average SF latency count, Maximum, minimum and average CT latency Others Easy-to-use graphical user interface Support TCL API for customizing tests
This 8-12 t/h feed pellet line is suitable for processing various animal feeds, such as chicken feed, poultry feed, livestock feed, bird feed, duck feed, goose feed, cattle feed, sheep feed, camel feed, horse feed, pig feed, rabbit feed, fish feed, shrimp feed, crab feed, aquatic feed, etc. The main equipment of a complete 8-12T/H feed pellet production line includes a hammer mill machine, 8-12 t/h feed pellet making machine, single shaft screw mixer, counter-flow feed pellet cooler, pellet crumbler machine, box cylinder pulse dust remover, vibrating screen classifier, bucket elevator, automatic bagging system, etc. This complete feed pellet plant can accomplish raw material mixing, transmission, feeding, and pelletizing. After the raw materials become feed pellets, the following equipment can cool them down and pack them into bags. The animal feed pellet production line has good raw material versatility and can be used for the granulation of various raw materials such as corn, sorghum, wheat, beans, and oilseed meal. At the same time, the animal feed production plant has the characteristics of low energy consumption, high production efficiency, and large profits. It is especially suitable for large feed mills, breeding farms, large farms, etc. At the same time, we provide free installation, training, factory design, and timely after-sales service.
This 13-18t/h feed pellet production line is suitable for processing various animal feeds, such as chicken feed, poultry feed, livestock feed, bird feed, duck feed, goose feed, cattle feed, sheep feed, camel feed, horse feed, pig feed, rabbit feed, fish feed, shrimp feed, crab feed, aquatic feed, etc. The main equipment of a complete 13-18t/h animal feed pellet production line includes a hammer mill machine, 13-18t/h feed pellet making machine, single shaft screw mixer, counter-flow feed pellet cooler, pellet crumbler machine, box cylinder pulse dust remover, vibrating screen classifier, bucket elevator, automatic bagging system, etc. This complete feed pellet plant can accomplish raw material mixing, transmission, feeding, and pelletizing. After the raw materials become feed pellets, the following equipment can cool them down and pack them into bags. The animal-feed pellet plant has good raw material versatility and can be used for the granulation of various raw materials such as corn, sorghum, wheat, beans, and oilseed meal. At the same time, the animal feed production plant has the characteristics of low energy consumption, high production efficiency, and large profits. It is especially suitable for large feed mills, breeding farms, large farms, etc. At the same time, we provide free installation, training, factory design, and timely after-sales service.
Large scale high performance 20-30 t/h feed pellet plant is suitable for processing various animal feeds, such as chicken feed, poultry feed, livestock feed, bird feed, duck feed, goose feed, cattle feed, sheep feed, camel feed, horse feed, pig feed, rabbit feed, fish feed, shrimp feed, crab feed, aquatic feed, etc. The main equipment of a complete 20-30T/H animal feed pellet mill machine includes an animal feed grinder and feed mixer, feed pellet machine, counter-flow feed pellet cooler, pellet crumbler machine, box cylinder pulse dust remover, vibrating screen classifier, bucket elevator, automatic bagging system, electric control cabinet, etc. This complete feed pellet plant can accomplish raw material mixing, transmission, feeding, and pelletizing. After the raw materials become feed pellets, the following equipment can cool them down and pack them into bags. The animal-feed pellet plant has good raw material versatility and can be used for the granulation of various raw materials such as corn, sorghum, wheat, beans, and oilseed meal. At the same time, the animal feed production plant has the characteristics of low energy consumption, high production efficiency, and large profits. It is especially suitable for large feed mills, breeding farms, large farms, etc. At the same time, we provide free installation, training, factory design, and timely after-sales service.
Large scale high quality 30-35t/h feed pellet plant is suitable for processing various animal feeds, such as chicken feed, poultry feed, livestock feed, bird feed, duck feed, goose feed, cattle feed, sheep feed, camel feed, horse feed, pig feed, rabbit feed, fish feed, shrimp feed, crab feed, aquatic feed, etc. The main equipment of a complete 30-35T/H animal feed pellet mill machine includes an animal feed grinder and feed mixer, feed pellet machine, counter-flow feed pellet cooler, pellet crumbler machine, box cylinder pulse dust remover, vibrating screen classifier, bucket elevator, automatic bagging system, electric control cabinet, etc. This complete feed pellet plant can accomplish raw material mixing, transmission, feeding, and pelletizing. After the raw materials become feed pellets, the following equipment can cool them down and pack them into bags. The animal-feed pellet plant has good raw material versatility and can be used for the granulation of various raw materials such as corn, sorghum, wheat, beans, and oilseed meal. At the same time, the animal feed production plant has the characteristics of low energy consumption, high production efficiency, and large profits. It is especially suitable for large feed mills, breeding farms, large farms, etc. At the same time, we provide free installation, training, factory design, and timely after-sales service.
Large-scale long-life guarantee 35-40t/h feed mill production plant is suitable for processing various animal feeds, such as chicken feed, poultry feed, livestock feed, bird feed, duck feed, goose feed, cattle feed, sheep feed, camel feed, horse feed, pig feed, rabbit feed, fish feed, shrimp feed, crab feed, aquatic feed, etc. The main processing flow of the 35-40t/h animal feed production line is raw material receiving and cleaning system, raw material crushing, batching & mixing, pelletizing, cooling, screening, and packaging. This is just the general 35-40ton per hour feed process, according to different feed types, different output configurations can be customized. If you want to make powder feed, the manufacturing process only needs cleaning, crushing, mixing, and packing sections. The animal-feed pellet plant has good raw material versatility and can be used for the granulation of various raw materials such as corn, sorghum, wheat, beans, and oilseed meal. At the same time, the animal feed production plant has the characteristics of low energy consumption, high production efficiency, and large profits. It is especially suitable for large feed mills, breeding farms, large farms, etc. At the same time, we provide free installation, training, factory design, and timely after-sales service.