XJ series electrothermal digestion instrument adopts the surrounding heating method to digest samples under normal pressure. The method of wet digestion is used to achieve the effects of rapid, efficient, convenient and large processing capacity. The digestion instrument surface is treated with imported PFA Teflon coating for corrosion prevention and non sticking, and is resistant to strong corrosion and high temperature of 260 â??. Product features: 1. The imported PFA Teflon coating on the board surface can effectively prevent the corrosion of the instrument caused by acid liquor and acid gas generated in the digestion process; 2. Working temperature: room temperature to 260 â??, can work continuously for 48 hours, 5-30 minutes can rise to 200 â?? (depending on the hole depth), and the thermal efficiency is more than 5 times higher than that of flat electric heating plate, which is more low-carbon; 3. Surrounding three-dimensional heating, small temperature difference between holes, so that all parts of the sample are heated evenly, which prevents heat loss to the greatest extent, ensures the consistency of sample processing effect, faster digestion speed, convenient use, and long service life; 4. PID temperature control digital display is adopted to ensure the stability of instrument temperature, temperature control accuracy �± 1 â??, voltage: 220V/50Hz; 5. The panel and control box can be made into components, so that the acid mist during the experiment will not corrode the components in the control box, thus increasing the service life, and multiple samples can be processed at the same time without cross contamination.
The electrothermal digestion instrument adopts the encircling heating method to digest the sample under normal pressure. The wet digestion method is used to achieve the effects of rapid, efficient, convenient and large processing capacity. The digestion instrument surface is treated with imported PFA Teflon coating for corrosion prevention and non sticking, which is resistant to strong corrosion and high temperature of 260 . Product features: 1. The imported PFA Teflon coating on the board surface can effectively prevent the corrosion of the instrument caused by acid liquor and acid gas generated in the digestion process; 2. Working temperature: room temperature to 260, can work continuously for 48h, 5-30 minutes can rise to 200 (depending on the hole depth), and the thermal efficiency is more than 5 times higher than that of flat electric heating plate, which is more low-carbon; 3. Surrounding three-dimensional heating, small temperature difference between holes, so that all parts of the sample are heated evenly, which prevents heat loss to the greatest extent, ensures the consistency of sample processing effect, faster digestion speed, convenient use, and long service life; 4. PID temperature control digital display is adopted to ensure the stability of instrument temperature, temperature control accuracy ± 1, voltage: 220V/50Hz; 5. The panel and control box can be made into components, so that the acid mist during the experiment will not corrode the components in the control box, thus increasing the service life, and multiple samples can be processed at the same time without cross contamination.
XJ series electrothermal digestion instrument adopts the surrounding heating method to digest samples under normal pressure. The method of wet digestion is used to achieve the effects of rapid, efficient, convenient and large processing capacity. The digestion instrument surface is treated with imported PFA Teflon coating for corrosion prevention and non sticking, and is resistant to strong corrosion and high temperature of 260. Product features: 1. The imported PFA Teflon coating on the board surface can effectively prevent the corrosion of the instrument caused by acid liquor and acid gas generated in the digestion process; 2. Working temperature: room temperature to 260 , can work continuously for 48 hours, 5-30 minutes can rise to 200 (depending on the hole depth), and the thermal efficiency is more than 5 times higher than that of flat electric heating plate, which is more low-carbon; 3. Surrounding three-dimensional heating, small temperature difference between holes, so that all parts of the sample are heated evenly, which prevents heat loss to the greatest extent, ensures the consistency of sample processing effect, faster digestion speed, convenient use, and long service life; 4. PID temperature control digital display is adopted to ensure the stability of instrument temperature, temperature control accuracy �± 1 â??, voltage: 220V/50Hz; 5. The panel and control box can be made into components, so that the acid mist during the experiment will not corrode the components in the control box, thus increasing the service life, and multiple samples can be processed at the same time without cross contamination.
Block Making Machine, Interlocking Block Machine, Concrete Pole Machine FactoryVertical coal-fired boiler, A head, drum, top Furnace, Furnace, bending pipe and other components. 1. Overview of Coal-Fired Steam Boiler Vertical coal-fired boiler, A head, drum, top Furnace, Furnace, bending pipe and other components. Vertical bending the structural features of water-tube boilers are: Furnace that has the curved pipe, increasing the radiation heating surface. However, a larger Furnace water level, lower the oven temperature, therefore, generally suitable for burning high quality coal. Such as the increase in the furnace refractory bricks, to maintain a high temperature, can also use the low quality coal species. Better water circulation. Using double-grate combustion chamber, heating quickly, can burn once again, to achieve full combustion, eliminating smoke, dust removal effect. Reasonable layout of the boiler structure, good heat transfer. The boiler design is reasonable, simple structure, convenient operation, easy maintenance, small footprint, low investment and production of steam and heating can be used for enterprises and units. 2. Performance Characteristics of Coal-Fired Steam Boiler 2.1 the furnace compared with the old vertical boiler, heating area bigger, faster step-heating, less coal consumption, higher thermal efficiency, can save 25-30% of coal. 2.2 a multi-purpose boiler, the furnace production of steam can be used in canteens steaming rice, tableware disinfection, baths heating, steam production, room heating and so on. 2.3 the furnace uses natural ventilation, do not blowers and induced draft fan and no noise. 2.4 compact structure, easy installation, simple operation, easy maintenance, can whole removal, the unit for mobile use. 2.5 baths with steam heating, food, heating, steam rice, etc., work pressure can not exceed the design pressure,does not allow super-pressure operation.
Contact: Amber hyja(at)szrl(dot).net Product Description Description of Food Grade Molding Silicone Rubber : Our RTV-2 Molding materials are general called two-component room temperature vulcanization liquid silicone rubber with excellent fluidity and good operational performance. Add part B into part A, stir the mixture evenly, then pour or brush the liquid mixture to the mother mold, then after 2-6 hours, a flexible silicone rubber mold will be obtained with resistance to deformation, high-temperature, acid and alkali and expansion. Applications of Food Grade Molding Silicone Rubber : Liquid food grade molding silicone rubber actually is a platinum catalyst silicone rubber which is totally non toxic, specially used for food molding, such as making silicone molds for confection, chocolate, jelly, sugar, candy, cake, cupcake, biscuit, cracker, icelolly, ice cream, ice sculpture, butter, fondant, bread, bakery, baking etc. Generally, silicone rubber food tray will be more popular since food such as chocolate and sugar are too small size, so our customers generally make silicone rubber tray, such as chocolate tray, sugar tray etc. Meanwhile, Food grade molding silicone rubber is also perfect for molding building decorations, arts and crafts, sculptures, furniture, manual mold design, shoe molding, tire molding, rapid prototype molding, foundry casting, lost wax casting, artificial jewelries molding and so on.
Two-component polysulfide sealant, as known as a two-component, non-sag, premium polysulfide sealant, which is also called polysulfide sealant for building made up of liquid polysulfide rubber, and add tackifying resin, vulcanizing agent, accelerant and fortifier into it. It contains two components and it can vulcanize and crosslink by itself at room temperature. The two components have clear color difference, which makes the mixing more convenient. It can keep good air tightness and water resistance in continuous vibration and temperature changes. In addition, it has a good bonding effect for metal, concrete and other materials. Application The polysulfide sealant is suitable for outdoor or indoor and can be used to seal both static and dynamic joints: Used to caulk at concrete, building, and bridge. Used in anti-leakage caulking of various types of expansion joints, such as waterworks, swimming pools, reservoirs, power plants, dams, sewage treatment works and water supply and drainage systems and other projects. Used as the joints of precast concrete, and the seams of the glass and construction. Used in the seaming of metal siding, and the bonding of aluminum window frame. Using method Add component B and pigment into component A; Stir quickly up and down until it is well mixed; Wipe the mixed sealant in the site where is waiting for construction with a small shovel; Don´t soak and contact with water within 48 hours after construction. Note Component B should be fully added into component A, which will affect the curing time and plasticity; The available time of mixed sealant is 2 hours. So the sealant should be used up as soon as possible after preparation to avoid the paste curing; The surfaces waiting for construction must be clean, dry and frost-free, and must be free of oils, grease, paints, coatings, sealers, curing compound residues, and any other foreign matter that might prevent adhesion; Notice to avoid water and rain within 48 hours after construction.
Baby corn in jar Baby corn is produced from regular corn plants which are harvested early while the ears are very immature, resulting in small ears called baby corn�. Baby corn is high in folate, a B-vitamin, a good source of several nutrients as potassium, B-6, riboflavin, vitamin C and fiber. Baby corn: A flavorful, appealing addition to salads, pasta, soups and other favorite dishes Product characteristics: Sensory characteristic: + Appearance: Natural white-yellow + Smell: Typical smell of natural baby corn + Taste: Typical like baby corn, slightly sweet, not mealy + Consistency: Tender to slightly firm Physical characteristic: + Calibre: Length 7-10cm/piece, +150 pieces/kg + Discoloration: Max 1% + Damaged Max 5% + Foreign matter: None Microbiological values: virtually sterilized, preserved by heat Other characteristic: + Shelf life: 2 years from production date + Storage: At room temperature for unopened, in the refrigerator for opened. Packaging available: Glass jar 370ml; tin can 15oz, 20oz, 30oz, 108oz (A10) Logistics information: + Glass jar 370ml: 12 jars/cartons, 3300 cartons/container+ Tin 15oz: 24 cans/carton; 1600 cartons/container + Tin 20oz: 24 cans/carton, 1350 cartons/container + Tin 30oz: 24 cans/carton, 900 cartons/container + Tin 108oz: 6 cans/carton, 1080 cartons/container
CMIT/MIT-14 CAS NO.: CMIT/MIT 26172-55-4/2682-20-4 Specifications: Item Description Appearance Yellow or yellow-green transparent liquid Content of Active Substance (%) 14.0min Rate of Chlorine 2.5 to 3.5 pH value 2.0 to 4.0 Density (g/ml) 1.27 to 1.33 Application field: The compliant lotion, building materials, electric power metallurgy, oil field chemical engineering, leather, paint coating and spinning prints to dye, the day turn, the antisepsis of cosmetics, deckle, the water transaction etc. realm. Performance characteristics: 1. As a broad-spectrum, long-lasting bactericide to kill many bacteria, fungi and yeasts, the using amount is small. 2. Suitable for use in the medium of the pH value in the range of 2 to 9; free of divalent salt, cross-link no emulsion. 3. Miscible with water; can be added in any production step; easy to use. 4. It has a low toxicity and an appropriate concentration of using, which will lead to no harm completely Usage and Cautions: 1. In water treatment applications, dilute it into a 1.5% aqueous solution first. Add the solution at a quantity of 80 to 100 ppm for one or two times each week depending on the multiplication of microorganisms like bacteria and algae. 2. Avoid direct eyes contact with it for a long period. Once the contact happens, rinse eyes with water without delay. No long-term contact with the skin is allowed. 3. Any contact with reducible metals is forbidden during storage, for example, iron and aluminum, so as to avoid decomposition. 4. Not suitable for use in the alkaline medium of pH> 9.0 due to its poor stability. Any combination of this chemical with highly nucleophilic chemicals, like S2- and R-NH2, will lead to declined quality or even complete failure of the product. Packaging: 250 kg per IBC drum or 250 kg per drum Storage and Transportation: To be stored at room temperature in a dark place; with a shelf time of one year If you have any demand about my products.
Why Do Magic Sponges Work So Well When I first used the magic sponge for cleaning, it attracted me. Sincerely, I put one in the kitchen, another in the bathroom, one on my shoe rack, and one in the drawing room for the cleaning table. It drags me out of the mud of housework. Its work is ideal, just as its whiteness is flawless. So clean, thanks magic melamine eraser cleaner. Now I search for it, I found a new amazing work it can do. For cleaning the wall, I really can t imagine that the magic eraser does so excellent cleaning this. I've been having a headache about the crayon on the wall my kid did. I was so excited when I saw the magic melamine sponge that can do this. Then I can't wait to try. The small magic sponge cleaning pad didn't let me down. I recommended it to my friends and neighbors instantly. They also really like the sponge very much. It helped me a lot. Magic Then I became very interested in this small block and try to find where the power comes from. How does the small cleaning sponge that is clean with a little water added to it work so well What and where is the magic that goes into a magic eraser First, we need to know that the material of the magic sponge is melamine foam. Getting through the processing of advanced technology, make the sponge a special open pores structure. Then the sponge becomes soft and flexible, we can use them for cleaning. The open cells inside seem like countless straws. When wiping, the adsorption capacity will bring the stains into the sponges. Second, can only the magic sponge do the whole cleaning work Not really, you also need water. But magic nano sponges dont need much. Just a little, water will activate the cleaning power. If you used it before, you will know, that when dry, it is easy to be broken; under wet, it is more flexible and not easy to break. Third, do you notice that the magic eraser will crumble when you wipe it When the sponge moves stains, at the same time, the stains will break the open cell structures inch by inch. So we can see, that the magic sponges wear off. In face of stubborn stains, the magic sponge will be used faster. Want to freshen up your house Try to use these miracle eraser sponges. If still have a certain consideration about the magical cleaning product, look at this Clean Website. It is a professional supplier in , supplying all kinds of magic cleaning tools. They did many tests for the sponge and have professional technical parameters. You can leave messages to them to get the information you want to know. Now we found the secret behind the magic eraser which makes cleaning more easy and fast. You never be plagued by boring scrubbing. Buy magic sponges to stock up some into your cabinet now.
What Do Magic Erasers Work So Well When I first used the magic eraser, it attracted me. Genuinely, I put one in the kitchen, another in the bathroom, one on my shoe rack, and one in the drawing room for the cleaning table. It drags me out of the mud of housework. Its work is well done, just as its whiteness is flawless. So clean, thanks Topeco Clean sponge melamine foam eraser. Newly I google it, I found a new amazing work it can do. For cleaning the wall, I really can t imagine that the magic eraser does so excellent cleaning this. I've been having a worry about the crayon on the wall my kid did. When I saw the magic eraser block can do this, I am so excited. Then I can't wait to try. The small magic block sponge didn't let me down. I recommended it to my friends and neighbors promptly. They also really like the sponge very much. It helped me a lot. Magic Then I became very interested in this small block and try to expect where the power comes from. How does the small white block that is clean with a little water added to it work so well What and where is the magic that goes into a magic eraser First, we need to know that material of the magic sponge is melamine foam. Getting through the processing of advanced technology, make the sponge special opening cell structure. Then the sponge becomes soft and flexible, we can use them for cleaning. The open cells inside seem like countless straws. When wiping, the adsorption capacity will bring the stains into the sponges. Second, can only a sponge complete the cleaning work Not really, you also need water. But magic sponge cleaners don t need much. Just a little, water will activate the cleaning power. If you used it before, you will know, that when dry, it is easy to be broken; under wet, it is more flexible and not easy to break. Third, do you notice that the magic eraser will wear away when you wipe it When the sponge cleans stains, at the same time, the stains will break the open cell structures inch by inch. So we can see, that the magic sponges wear off. In face of stubborn stains, the magic sponge will be used faster. Want to freshen up your house Try to use these miracle eraser sponges. If still have a certain skepticism about the magical product, look at this Clean . It is a professional , supplying all kinds of magic sponges. They did many tests for the sponge and have professional technical parameters. You can leave messages to them to get the information you want to know. Now we found the secret behind the magic eraser which makes cleaning work more easy and fast. You never be plagued by boring scrubbing. Buy magic sponges to stock up some into your cabinet now.
1. Product description Compared with the general gear reducer, the TDY type oil cooled conveyor pulley has the advantages of compact structure, small size, light weight, good sealing, convenient installation and simplicity. It can be used in dusty, humid, muddy, open-air and other harsh environments. The ambient temperature is --15â??--+40â??. It is generally not used for conveying high-temperature materials and explosive sites. The altitude should not exceed 1000 meters, and it should be installed horizontally. Techinical Parameterï¼? Powerï¼?0.25 kw-160kw Transmission Velocity:  0.035-5m/s 2. Characteristics 1. It can replace the external drive device of motor-reducer type which is widely used at present. It can be used to construct belt conveyor. It can convey bulk materials such as coal, ore, sand, cement, flour, etc. and also can convey parts such as sacks and equipment. 2. The structure is simple and compact, and occupies a small space area. 3. It is well sealed and suitable for workplaces with high dust concentration and wet mud. 4. Easy to use and maintain, safe and reliable operation, long service life. 5. Low energy consumption and easy to achieve centralized control. 6. It can satisfy all kinds of backstop, brake, glue wrapping and other require 3. Application area It is widely used in mining, metallurgy, chemical industry, coal, building materials, electric power, light industry, grain, wharf, warehouse, logistics and other departments. 4. Working conditions: 1. The ambient temperature is -15â??~+40â??. 2. No more than 1000 meters above sea level. 3. The temperature of conveying materials should not exceed 60â??. 4. Voltage 380V, frequency 50Hz. 5. Terms of Payment 30% by T/T in advance. 6. Packaging & Delivery Packing details: To be packed in wooden cases. Loading Port: Shanghai,China Delivery time: Within 25-35 working days after we have received the full payment. 7. Our service 1.Delivery on time 2.Safe, reliable, economical and durable 3.The Warranty period is 12 months 4.Professional engineers for your design, drawing, ensure the quality of production if non-standard products. 5.The photos and films of production process will be reported to you.
animal salt mineral licking block press machine technical characteristics 1, using advanced PLC hydraulic transmission technology, high technology, low failure rate, high degree of automation, high efficiency. 2, the host structure is compact, small footprint, easy to move and transport. 3, four-oriented structure, molding pressure, high density of pressed products, not broken. 4, hydraulic pump station structure design is reasonable, highly concentrated hydraulic control valve block and a unique design of the hydraulic system to make the hydraulic system perfect, and effectively achieve the continuity of normal production. 5, replace the mold can live Participation in various specifications of the salt block, weighing up to 2kg ~ 25kg, to achieve the product diversification needs and reduce investment costs. 6, the electrical control program to achieve a human-computer interaction, simple operation, convenient and quick. 7, low failure rate, heat a small, high efficiency, energy saving and durable. high efficiency animal salt mineral licking block press machine for livestock high efficiency animal salt mineral licking block press machine for livestock high efficiency animal salt mineral licking block press machine for livestock features 1, the host rack with cast steel structure, good rigidity, high strength, will not be deformed, extending the service life of salt block press machine for livestock. 2, in the middle of the mold according to the needs of users removable , with different molds can produce different size specifications of the product, to achieve the product diversification requirements. 3, hydraulic pump station structure design is reasonable, the hydraulic valve centralized device and the optimal design of the hydraulic system makes the hydraulic system perfect, improve the performance of the equipment. 4, the perfect hydraulic system to ensure that the equipment can withstand greater load, long-term trouble-free production, improve work efficiency. 5, the configuration of the cooler to ensure that the salt mineral licking block press machine will not affect the hydraulic system due to overheating oil production failure. 6, electrical control cabinet technology to improve the use of advanced display text controller to facilitate user control, and low failure rate. Packaging & Shipping Packaging Details Internal plastic moisture-proof anti-rust packaging, External wooden packaging, Exclusive container transport. Delivery Time 10-40days after order
Acoustic Slat Wood Wall Panels Deco Sound's acoustic slat wood wall panels offer luxury quality, state-of-the-art noise reduction wood paneling solutions. Each panel is handcrafted to not only visually transform a project, but also to create a quieter, more comfortable environment. They fit with any design theme, from natural and earthy to sleek and contemporary. This means it not only looks and feels like solid wood but also offers you a popular rustic look. Acoustic Slat Wood Wall Panels Dimensions Each panel measures 2400mm x600mm and is formed from 12mm deep and 27mm wide lamellas, with a distance of 13mm in between each. These slats are then mounted on a base of 9mm thick acoustic felt, The panel is 22mm thick in total, including the slats and the felt. Acoustic Slat Wood Wall Panels Application Deco Sound's acoustic wooden slats panels for walls and ceilings can quickly transform any modern space. These slatted wood wall panels are made of veneered thin slats placed on an acoustic felt backing for durability. Easy to install on your own, slat wall panels can instantly transform your bedroom, living room or office into a sophisticated, modern space. Features of acoustic slat wood wall panels The perfect decorative panel for all interior environments. Acoustic slat wood is the ideal choice for all interior applications. Provides an eye-catching, easy-to-install, one-piece panel solution. Modern, clean, contemporary and elegant design. Slat wood wall panels are carefully designed to seamlessly transform any space, visually and acoustically enhancing the surroundings. They help create an environment that is not only quiet but also modern, soothing and relaxing. Backing felt made from recycled materials. Our wood is sourced and produced from certified sustainable sources, acoustic felts are made from recycled plastic bottles, and all wood is sourced from sustainable forestry, making the panels not only attractive but also environmentally friendly. Outstanding noise reduction performance. acoustic slat wood wall panels are the perfect solution for efficient sound absorption as well as reducing the reverberation time of noise in your space, which means they are perfect for both domestic and commercial use. Meticulously designed hand paneling solutions. Enhance your space with our acoustic slat wood wall panels for wall and ceiling acoustic slat paneling. The panels are made of veneer sheets with a specially developed acoustic felt base made from recycled materials. The hand-made panels are not only designed to fit the latest trends but are also easy to install on your walls or ceilings. Designed for a quick and straightforward installation process. Simply screw the panel directly into the wall through the felt acoustic backing, or if you want Class A sound absorption, you can install the panel using a baton.
Description A tempered glass fridge shelf is a type of shelf that is commonly found in modern refrigerators. It is made of tempered glass, which is a type of safety glass that is designed to shatter into small, rounded pieces rather than sharp shards when broken. This makes it safer to use in areas where breakage is possible, such as a refrigerator. Tempered glass refrigerator shelves are popular because they are easy to clean and maintain, and they are less likely to break or crack compared to other types of shelves. They are also more resistant to temperature changes and can withstand the weight of heavy food items and containers. Material: 3mm-5mm tempered glass refrigerator shelves Technics: Physically tempered. Thickness: 3mm, 3.2mm, 4mm, 5mm, 6mm. Shape: Square, Rectangle Size: Customized size. Edge craft: Flat edge, Pencil edge. Angle craft: Right angle, Safety angle, Round angle, Cut angle Silk print: Transparent tempered glass refrigerator shelves, Low-temperature silk-printed tempered glass, High-temperature silk-printed tempered glass. Brand: Huide(OEM available) Origin: China Impact Test: Falling steel ball test. Package: Export standard wooden sea packing MOQ: 1* 20ft container Payment: 30% deposit, left 70% paid before shipment. Delivery capacity: 300,0000ã?¡/Year Delivery period: 15-30 days after deposit, it depends on your quantity. Manufacturing Process: Cutting-Edge grinding-physically tempering-silk printing-Packing-Shipment.
plastic injection auto parts Plastic Injection Auto Molded Parts For Auto Components Product Name oem plastic injection auto parts Molds making (double injection/overmolding/insert molding/multi-cavity/hot runner) Colors You provide us PANTON# and we will match the colors Mold Base LKM & HASCO & DME Mold Material NAK80,S136,H13 ,718H,P20,and so on Mould Cavity Singe or multi as your requirement Sprue Gate YUDO runner ,Hot runner, Cold runner ,Pin -point gate, Submarine gate, etc Design Software UG,PROE,CAD etc Plastic Material PP, PC, PS, POM, PE, PU, PVC, ABS, PMMA, etc Mold Life 300,000-1,000,000 shots Delivery Time 15-35 working days Packaging Wooden Cases or as per requirement Transportation By sea or by air as your requirement Specification As your requirement OEM /ODM Order YES rapid prototyping Elue Advantages: 1.We can meet your small or big production needs for both cnc machining&plastic molding. 2.Prompt response within 12hours,great technical support over 10 engineers. 3.Rich experience cooperating with big companies like BMW,huawei,etc, Quality is the Culture. 4.Complete inspection equipment,and all parts 100% inspected like sizes,flatness,roughness, etc. 5.ONE-stop service from engineering-protoyping-production-post processing-assembly-packing. Hot sale various high quality CNC machining, rapid prototyping, molds making, plastic injection from China leading manufacturer. Our products are efficient, cost effective and deliver more benefits. Welcome to choose us!
Product description: PS-80 paper straw machine is designed for making paper drinking straw. Meeting Food grade production standard. Making spirally tube from Glue feedingã??winding, final cutting inline. 1ã?? Body structure, Heavy-duty steel welded after NC cutting. Stable ,Strong and small vibration. 2ã?? Paper stand , integral high speed design, constant paper tension control.. 3ã?? Glue stand, glue temperature control, feeding amount control. 4ã?? Simple appearance, all motors put inside, make it easy for cleaning.. 5ã?? Safety as the core design element, transformation part protected , covered with 1.2mm thick stainless steel. 6ã?? Stable, simple transformation principle, maintaining-free design, reduce maintaining frequency during operation. 7ã?? High speed, 80M/Min paper feeding, up to 70M/Min tube production speed. Splicing part & Glue system with lubrication Tube forming part 7 knives cutting part Delivery part Technical parameter: Model PS-80 Paper Layer 3 layers Inner Diameter 4.5-12mm Cutting system 7 knives Cutting length 120-1100mm Capacity Max 80m/min. Glue system with lubrication Fully-automatic Splicing Semi-automatic Working air compressor 0.6Mpa Power 5.5 KW Weight 2000 KG Working space 7000x5000mm Our service 1.One year guarantee time. 2.Present a set of wearing parts in wooden case before delivering the machine for free. 3.If parts (except wearing parts) are broken within guarantee time (it is not caused by human factor), they will be changed for free. The client should pay for the cost following: 1.Visa fee 2.Air ticket 3.Diet 4.Accommodation 5.Labor fee:Three days for free 100 USD/day for extra NOTE:ALL OF THE COST SHOULD SEND TO US BEFORE SENDING OUT ENGINEER/PARTS.
HP-250A Full automatic self-self pocket envelope making machine is suitable for producing self-seal small pocket envelope (open-end envelope). This two-in-one machine includes folding pocket envelope and gumming open-end envelope with self-seal glue on the flap inline. 1. Reliable sheet separation 2. No-stop feeder 3. Easy regulation and paper positioning, accurate paper positioning 4. Ensuring under high speeds. 5. High quality electronic parts. 6. High Production efficiency. 7. Operator Friendly. Technical parameter: Model HP-250A Paper weight 60 - 200 g/m² Output per hour 5000 - 18000 pieces Size ranges envelopes mm 40x70 - 120x250 inch 1.57x2.75 - 4.72x9.84 Connected load 7.75kw Weight 1300kg Dimensions 5100x850x1100mm Process sketch map: Our advantage: 1. The TOP professional manufacturer in china. 2. 24 hours service hotline, solve customers problem. 3. High cost-effective 4. After-sale service: timely and considerate Sample show: Picture in stock: Our service 1.One year guarantee time. 2.Present a set of wearing parts in wooden case before delivering the machine for free. 3.If parts (except wearing parts) are broken within guarantee time (it is not caused by human factor), they will be changed for free. The client should pay for the cost following: 1.Visa fee 2.Air ticket 3.Diet 4.Accommodation 5.Labor fee:50 USD/day (within guarantee time) 100 USD/day (without guarantee time) NOTE:ALL OF THE COST SHOULD SEND TO US BEFORE SENDING OUT ENGINEER/PARTS.
HP-250A Full automatic self-self pocket envelope making machine is suitable for producing self-seal small pocket envelope (open-end envelope). This two-in-one machine includes folding pocket envelope and gumming open-end envelope with self-seal glue on the flap inline. 1. Reliable sheet separation 2. No-stop feeder 3. Easy regulation and paper positioning, accurate paper positioning 4. Ensuring under high speeds. 5. High quality electronic parts. 6. High Production efficiency. 7. Operator Friendly. Technical parameter: Model HP-250A Paper weight 60 - 200 g/m² Output per hour 5000 - 18000 pieces Size ranges envelopes mm 40x70 - 120x250 inch 1.57x2.75 - 4.72x9.84 Connected load 7.75kw Weight 1300kg Dimensions 5100x850x1100mm Process sketch map: Our advantage: 1. The TOP professional manufacturer in china. 2. 24 hours service hotline, solve customers problem. 3. High cost-effective 4. After-sale service: timely and considerate Sample show: Picture in stock: Our service 1.One year guarantee time. 2.Present a set of wearing parts in wooden case before delivering the machine for free. 3.If parts (except wearing parts) are broken within guarantee time (it is not caused by human factor), they will be changed for free. The client should pay for the cost following: 1.Visa fee 2.Air ticket 3.Diet 4.Accommodation 5.Labor fee:50 USD/day (within guarantee time) 100 USD/day (without guarantee time) NOTE:ALL OF THE COST SHOULD SEND TO US BEFORE SENDING OUT ENGINEER/PARTS.
PS-80 paper straw machine is designed for making paper drinking straw. Meeting Food grade production standard. Making spirally tube from Glue feedingã??winding, final cutting inline. 1ã?? Body structure, Heavy-duty steel welded after NC cutting. Stable ,Strong and small vibration. 2ã?? Paper stand , integral high speed design, constant paper tension control.. 3ã?? Glue stand, glue temperature control, feeding amount control. 4ã?? Simple appearance, all motors put inside, make it easy for cleaning.. 5ã?? Safety as the core design element, transformation part protected , covered with 1.2mm thick stainless steel. 6ã?? Stable, simple transformation principle, maintaining-free design, reduce maintaining frequency during operation. 7ã?? High speed, 80M/Min paper feeding, up to 70M/Min tube production speed. Splicing part & Glue system with lubrication Tube forming part 7 knives cutting part Delivery part Technical parameter: Model PS-80 Paper Layer 3 layers Inner Diameter 4.5-12mm Cutting system 7 knives Cutting length 120-1100mm Capacity Max 80m/min. Glue system with lubrication Fully-automatic Splicing Semi-automatic Working air compressor 0.6Mpa Power 5.5 KW Weight 2000 KG Working space 7000x5000mm Our service 1.One year guarantee time. 2.Present a set of wearing parts in wooden case before delivering the machine for free. 3.If parts (except wearing parts) are broken within guarantee time (it is not caused by human factor), they will be changed for free. The client should pay for the cost following: 1.Visa fee 2.Air ticket 3.Diet 4.Accommodation 5.Labor fee:Three days for free 100 USD/day for extra NOTE:ALL OF THE COST SHOULD SEND TO US BEFORE SENDING OUT ENGINEER/PARTS.
HP-250A Full automatic self-self pocket envelope making machine is suitable for producing self-seal small pocket envelope (open-end envelope). This two-in-one machine includes folding pocket envelope and gumming open-end envelope with self-seal glue on the flap inline. 1. Reliable sheet separation 2. No-stop feeder 3. Easy regulation and paper positioning, accurate paper positioning 4. Ensuring under high speeds. 5. High quality electronic parts. 6. High Production efficiency. 7. Operator Friendly. Technical parameter: Model HP-250A Paper weight 60 - 200 g/m² Output per hour 5000 - 18000 pieces Size ranges envelopes mm 40x70 - 120x250 inch 1.57x2.75 - 4.72x9.84 Connected load 7.75kw Weight 1300kg Dimensions 5100x850x1100mm Process sketch map: Our advantage: 1. The TOP professional manufacturer in china. 2. 24 hours service hotline, solve customers problem. 3. High cost-effective 4. After-sale service: timely and considerate Sample show: Picture in stock: Our service 1.One year guarantee time. 2.Present a set of wearing parts in wooden case before delivering the machine for free. 3.If parts (except wearing parts) are broken within guarantee time (it is not caused by human factor), they will be changed for free. The client should pay for the cost following: 1.Visa fee 2.Air ticket 3.Diet 4.Accommodation 5.Labor fee:50 USD/day (within guarantee time) 100 USD/day (without guarantee time) NOTE:ALL OF THE COST SHOULD SEND TO US BEFORE SENDING OUT ENGINEER/PARTS.