Generates high pressure air, double the primary pressure without electric power. Contributes to energy savings of the plant by utilizing existing compressed air equipment to boost pressure in areas where it is needed. Long service life components reduce total cost of plant.
Elbow speed control valve with push-in fitting. Piping screw is coated with sealant.
Push-in fitting for pneumatic piping. Compact size for space saving. Work environment and device-friendly flame-resistant white body.
Fluoropolymer Increasingly more technical applications in aggressive environments, in terms of temperature, chemical agents and atmospheric conditions, made it possible for fluoropolymers to find more space on the market. These polymers offer extremely high performance, though at elevated costs regarding both raw materials and production. Depending on the bond between carbon and fluorine, and their arrangement in the molecular structure, one can have varying products with different characteristics. Concerning chemical resistance and use at low and high temperatures, the father of all fluoropolymers is PTFE, which demonstrates almost complete inertia towards most known chemical reagents and has work temperatures that range from -260 to +260 'C. After PTFE, these other fluoropolymers can be found, in order of importance: PFA, FEP, and PVDF.
Polyethylene, making up 40% of the total volume of plastic materials produced in the world, is one of the most diffused polymers in everyday life. Despite its simple chemical composition, there are numerous varieties of polyethylene with differing thermal and mechanical properties.
Polyurethane The term polyurethane encompasses a vast family of products with numerous varied characteristics in terms of mechanical, chemical and physical properties. Through the right choice and proportion of polyols and diisocyanates it is possible for products to range from soft and sponge-like, such as flexible foams with extremely low density (pillows, mattresses, etc.) to products with elevated resistance to compression and flexion stress (for applications in sporting goods, such as hiking boots, ski boots, etc.). In order to have a general guide regarding the characteristics of polyurethane, the primary distinctions to consider relate to its chemical nature, or rather, if it has an ester or ether base. In commerce there is also a third family of polyurethane, which derives from the synthesis of caprolactam, which exhibits intermediate characteristics between polyester and polyether.
Polyamide The success of polyamides is due to a combination of characteristics that make them ideal for many applications. Polyamides combine optimal mechanical properties with excellent chemical resistance; they can be used as metal substitutes or even as elastomers; they can be used in both protected and aggressive environments (UV rays, bad weather conditions, etc.); this is possible due to the numerous types of polyamides that manifest varied and specific characteristics.
1. Shape and Size As Requested 2. Ash Content Max 5.0% 3. Total Moisture Max 7.0% 4. Burning Time 3 - 7 hours 5. Fixed Carbon Min 79% 6. Caloric Value 7500 Kcal/Kg 7. Volatile Matter Max 13% 8. Hardness Max 75%
1. Shape and Size As Requested 2. Ash Content Max 7.0% 3. Total Moisture 6.0% 4. Burning Time Up to 10 hours 5. Fixed Carbon Max 80% 6. Caloric Value 7600 Kcal 7. Volatile Matter 15% 8. Ash Color Grey or White
1. Made from coconut shell 2. Burning time 3 times longer 3. Leaves less than 3% ashes 4. Easy To light 5. Odorless & Tasteless 6. Preserves genuine smells (Bakhour) 7. No Sulphur 8. Shape: Cube 9. Size 25x25x25 mm3 and 26x26x26 mm3
Name of product: Unrefined Sunflower Oil Specification of product (DSTU 4492:2017) The grade - First Transparency the presence of grid over the sediment Taste and smell - Inherent Colour number, mg of iodine - 15 Acid value, mg KOH/g 1,26 Mass part of unfatty admixtures, % - 0,01 Mass part of moisture and volatiles, % - 0,12 Peroxide value, ½ O mmol/kg 3,05 Phosphorus-containing substances in recalculation to stearo-oleo-lecithin, % - 0,555 Extraction oil flash point *C, not lower than - 225 Price per ton of product: 1270,00 EUR Quantity: Trail delivery min. 200,00 MT Loading Port: Poland Packing: Flexitank container Payment Currency: EUR Forms of Payment: CAD/TT or LC (another agreed with the client) Origin: Ukraine
NAME METHOD UNIT RESULT Acid value ISO 660:96 mg KOH/g 0.20 Moisture and volatile matter ISO 662 mass% 0.04 lmpurities (insol. in hexane) ISO 663-2007 mass% Less 0.01 Refractive index at 40 C ISO 6320 1.4673 Lovibond Colour (113.5 mm) Red ISO 27608 1.5 Lovibond Colour (113.5 mm) Yellow ISO 27608 11.0 Lovibond Colour (113.5 mm) Blue ISO 27608 0 Lovibond Colour (113.5 mm) Neutral ISO 27608 0.1 Peroxide Value ISO 3960 mmol/kg 3.57 Phosphorus ISO 10540-1 mg/kg 3 Gold Test AOCS Cc 11-53 Pass Flash point (PM) procedure A ASTM D 93 oc more 235.0
Specific Density (at 20 C) kg/m3 0.9 0.90- 0.923 Retractive Index (at 40 C) 1.48 1.475-1.476 Acidity mg KOH (%) gin oil max 0.03 0.03-0.06 Peroxide value MEQ/kg oil max 0.6 1 (max) Color value iodine, mg max 10 15 (max) Iodine value (WIJS) 127g/100g 112 The saponification value, mg 186 185-194 Unsaponifiable (%) 1.3 1.3-1.5 Moisture (%) 0.01 0.01-0.025 Non- fatty impurities, % max 0.1 0.1-0.2 Coloring 0.9 Red/ 10Yellow 0.9 Red / 15 Yellow Artificial flavours NIL NIL Preservative agent NIL NIL Anti-foaming agent NIL NIL Anti-crystalization agent NIL NIL Acidity, free fatty acid 0.038 0.03- 0.07 FEA. 0.0006 0.001 Refractive index 1.47 1.474- 1.475 Taste Neutral Neutral
Refined and Unrefined sunflower oil in flexi tanks and/or in bottles of 1, 3, 5, 10 liters Origin: Ukraine FCAor FOB Odessa The Quality Of The Product: Color value is not more than 10 mg of iodine; Acid value not more than 0.4 mg Koh/g; Peroxide value not more than 5, ½ O2 ml/kg; Mass fraction of not fat admixtures missing. Mass fraction of moisture and volatile matter not more than 0.1 %; Mass fraction of phosphor containing substances in calculation on stearooleocytin missing. Temperature of flash of extraction oil no less than 234 °C; Other quality indicators of the Goods meet the standards of refined sunflower oil, DSTU 4492-2005 and be confirmed by the certificate of quality issued by the independent international expert company "SGS" (SOCIETE OENERALE DE SURVEILLAN)
Adampolsoya produces non-gmo crude degummed soybean oil the quality characteristics of which fully meet the requirements of the food products industry. Soya bean oil crude degummed (non-gmo) Quality parameters Insoluble impurities Max. 0.1% Water and volatile substances Max. 0.3% Phosphorus Max. 200 ppm Acid value Max. 2.0 mg koh/g Peroxide value Max. 4.0 â½ o mmol/kg Color (aocs ry scale) Yellow â?? max. 50 Color Max. 60 mg iodine Flash point (extraction oil) Not lower than 225â°c Gmo content Eu standards Gmp + fsa Assured Shelf life 6 months from the Date of production
type : sunflower oil brand name - color yellow, clear yellow purity 100% grade 1st grade, grade a certification iso, haccp specifications: parameter chemical specifications specific gravity at 20c 0.916-0.923 refractive index at 20c 1472-1474 lodine value 120-143 . unsaponification 2.5 max free fatty acid 0.1% max. peroxide value 1 max. (meg/kg) color max. 2 red (on 5 lovibond cell) moisture 0.1% max appearance clear and bright odor and flavor odorless and bland our products obtain haccp and iso certificate, and approved by international customers. labeling customized is acceptable, we can print labels on the bottles to be provided by buyers. packaging & delivery 100% pure refined vegetable oil and sunflower oil
PARAMETER CHEMICAL SPECIFICATIONS Free Oil Acidity (Expressed OS Oleic Acid) 0.30% Max Refractive Index at 40C 1.466-1.470 Peroxide Value (Meg. Gr/Kg) 1.0 Max Saponification Value 189-195 Iodine Value 120-143 Density at 20C 0.909-0.925 Unsaponifiable Matters 1.5% Max Appearance Clear Soap Test 0.005% Max Insoluble Impurity in Ether 0.05 Max Volatile Matter at 105C Test Negative Mineral Oil Test Negative Sesame Seed Oil Test Negative Cold Test after 24 Hours Negative FF (Iron) 1.5 Max CU (Copper) 0.1 Max PB (Lead) 0.1Max Our products obtain HACCP and ISO certificate, and approved by international customers. Labeling customized is acceptable, we can print labels on the bottles to be provided by buyers
- extra virgin olive oil from our family-owned olive farm in Split region of Croatia - all of the hand-picked "Oblica" variety olives we use in our oils are cold-pressed within 24 hours of harvest - our olive oils have an acidity score of 0.24% and are certified extra virgin, ultra premium, the highest grade of olive oil - low peroxide number measured 2,6 mmol O2/kg guarantees that olive oil will not lose its flavor and nutrition value quickly - our extra virgin olive oil isn`t mixed, diluted, or filtered to ensure the clearest, freshest flavor possible and all of the nutritious health benefits of fresh fruit - our olive oil has a rich, complex, balanced flavor with herbaceous, and floral notes
We take pleasure in being the one stop solution for our customers by offering Tallow (Animal Fat Oil). The quality control team on staff keeps a close eye on strict concurrence with industrial quality standards. It is impurity free and hygienically packed as it is made of first-rate raw material. Owing to our enriched industrial experiences, we are committed to providing excellent quality of Tallow (Animal Fat Oil). Features: Hygienically processed. Safe packing Free from adulteration Specification of our product areas: Moister - 1.0% Max. Impurities - 8% Max. Free fatty acids as oleic acid - 3.0% Max. Unsaponifiable matter - 0.5% Max. Lodine value - 44. Titre value - 38-42. Saponification value - 192 - 202. Peroxide value - 5% Max.
Litharge yellow lead oxide PbO, CAS 1317-36-8 Packaging Details: 25kgs/woven bag, 50Kg/woven bag, 50Kg/iron drum, 1000Kg/big bag, all packing PE bag inside. Delivery Detail: Shipped in 15 days after payment Item Standard Lead Oxide % â?¥ 99.5 Free lead % â?¤ 0.1 Lead Peroxide % â?¤ 0.05 Nitric acid in soluble % â?¤ 0.1 Moisture % â?¤ 0.2 Ferric Oxide% â?¤ 0.002 Copper Oxide% â?¤ 0.001 Residue (325Mesh) % â?¤ 0.2 Qingdao Dechen Chemical Co.,ltd. Add.: No.11, Wuyang Road, Shibei Dist, Qingdao, China Tel.: 0086-532-89938196 0086-532-89938199 Fax: 0086-532-80687199 0086-532-89938197 Mobile: 0086 13905325487 Whatsapp: 0086 13905325487 Email: bruce(at)dechenchem.com Website: www.dechenchem.com