If you need it, please contact me immediately! Don't hesitate ====== The ABB IIMCL01 Multi Bus Communication Link Terminal is a communication module designed to interface various communication buses within ABB's automation and control systems. This module is used to facilitate communication between different communication networks or buses, enabling data exchange and integration across various parts of an industrial control system. Typical Applications: Industrial Automation: Used to integrate various communication networks within an automation system, facilitating the exchange of information between different parts of the control system. Process Control: Enables communication between different process control systems or devices that use different communication protocols. System Integration: Ideal for environments where multiple communication standards or networks need to be bridged or integrated. Configuration and Use: Installation: Follow the installation instructions provided in the moduleâ??s technical documentation to ensure proper integration into the existing system. Wiring and Connections: Properly connect the module to the different communication networks it will interface with. Wiring diagrams and connection instructions are provided in the moduleâ??s documentation. Configuration: Configure the module using the appropriate system software to set up communication parameters and protocols. Maintenance and Troubleshooting: Documentation: Consult ABBâ??s manuals and technical documentation for detailed installation, configuration, and maintenance procedures. Diagnostics: Use the moduleâ??s diagnostic features to monitor communication status and troubleshoot any issues that may arise. Replacement: If the module fails, it can be replaced with an identical or compatible unit. Ensure proper integration and configuration of the replacement module.
The TS-M1021 is a diminutive Bluetooth module, measuring merely 8 by 12 millimeters, designed for applications requiring minimal size and low power consumption, without compromising on cost-effectiveness. This module is renowned for its remarkable stability and wide-ranging compatibility. It comes with a default setting that facilitates Bluetooth serial port transparent transmission, allowing users to modify serial port baud rates, device names, and additional parameters using the supplied AT commands. This feature enables adaptable operation and straightforward implementation, making the module an ideal choice for a diverse array of customer development projects. Model No.: TS-M1021 Features Bluetooth Version: BLE 5.1 Frequency Band: 2.402GHz-2.480GHz ISM band TX Power: -20dBm~+10dBm Receive Sensitivity: -97dBm Air Rate: 250Kbps/1Mbps/2Mbps Antenna: Ceramic Antenna Advise Range: 100m Memory: 512KB FLASH+56KB RAM Size: 12*8*1.5mm Pin/GPIO: 12/7 Power Supply: 2.0~3.6V Operating Temperature: -40~+85 Peripheral Interface: UART/I2C/ADC Serial Transparent Transmission Rate: BLE 20KB/s Applications Smart home Location tracking Intelligent educational equipment Measurement and monitoring system Industrial sensors and controls Medical equipment monitoring and wireless control
TS-M1020D is an 8*12mm ultra-small size Bluetooth low power ultra-low cost Bluetooth module, the module is a Bluetooth 5.2 chip, integrated BLE+SPP dual Bluetooth protocol, with excellent stability and compatibility. Module default Bluetooth serial port transparent transmission, the user can change the serial port baud rate, device name and other parameters according to the provided AT instructions, flexible operation and simple use. Suitable for various development projects of customers. Model No.: TS-M1020D Features Bluetooth Version: BLE 4.2+SPP 3.0 Frequency Band: 2.402GHz-2.480GHz ISM band TX Power: -20dBm~+4dBm Receive Sensitivity: -95dBm Air Rate: 250Kbps/1Mbps/2Mbps Antenna: Ceramic Antenna Advise Range: 80m Memory: 256KB FLASH+128KB RAM Size: 12*8*1.5mm Pin/GPIO: 12/7 Power Supply: 3.1~4.35V Operating Temperature: -20 ~+85 Peripheral Interface: UART/SPI/I2C/ADC Serial Transparent Transmission Rate: BLE 4KB/s, SPP 16KB/s Applications Smart home Location tracking Intelligent educational equipment Measurement and monitoring system Industrial sensors and controls Medical equipment monitoring and wireless control
SICK connects - complete connectivity from a single source. SICK provides connection devices that easily connect to other devices in your machine, regardless of the selected automatic identification technology. These devices enable easy integration of field bus gateways into the modular connection boxes, making it possible to incorporate the scanner, camera or RFID systems into different field bus technologies. A field bus proxy, external parameter memory, display, and power modules provide a high degree of application flexibility. At A Glance: Connection module for one ID pro sensor Clearly visible, easily accessible screw- and spring-loaded terminals Connection diagram on the inside of the lid Configuration with switches IP 65 connection for one ID pro sensor using standard connection cable Basis for CMC600 parameter cloning module Service plug for direct access to the AUX interface Your benefits: Compact design fits into small spaces Two mounting holes for fast, precise installation saves on installation costs Clearly labeled, easily accessible screw- and spring-loaded terminals save time when connecting to peripherals Quick, easy configuration with switches reduces installation time Industrial-standard connection guarantees a reliable application solution CMC600 parameter cloning module allows rapid exchange and replacement of connected sensors Product Family: In this type of sensors CDM, CDF, CDB series are available. Protection Class Protection class can be up to IP69K.
Feature: 1ã??Made of high quality ABS plastic diagnostic connector cable, very durable in using 2ã??Used to connect compatible diagnostic tools with 16 pin interface to a 5 pin socket for Honda 3ã??Connector: for Honda 5 pin male connector; OBDII 16 pin female connector 4ã??This 5 Pin to OBD II 16Pin connector cable, could connect to the car reader for car inspection This adapter is used for converting connection from 5 Pin to 16 Pin interface, it will allow you to connect compatible diagnostic tools on a vehicle fitted with a 5 pin socket with your existing 16 pin tool. Note: 1. This item is just an adapter cable, not a scanner. 2. Please allow 1-3cm error due to manual measurement. Thanks for your understanding.
Feature: 1 Made of high quality ABS plastic diagnostic connector cable, very durable in using 2 Used to connect compatible diagnostic tools with 16 pin interface to a 3 pin socket for Honda 3 Connector: for Honda 3 pin male connector; OBDII 16 pin female connector 4 This 3 Pin to OBD II 16Pin connector cable, could connect to the car reader for car inspection This adapter is used for converting connection from 3 Pin to 16 Pin interface, it will allow you to connect compatible diagnostic tools on a vehicle fitted with a 3 pin socket with your existing 16 pin tool. Note: 1. This item is just an adapter cable, not a scanner. 2. Please allow 1-3cm error due to manual measurement. Thanks for your understanding.
Features: 1.super mute crimping machine, low noise 2.high quality cable making machine, for all kinds of terminals 3.quick replacement of applicators, English interface 4.easy operation and maintenance Technical Specs: Model HL-4000A(N) Pressure capacity 4Ton Stroke 30mm Height Adjustment Voloume 10mm Power supply AC220V� � � 50/60HZ Power 1.25kw Operating model single pedal switch Dimension 310*270*710mm Weight  75KG
Specifications: Features: 1.super mute crimping machine, low noise 2.high quality cable making machine, for all kinds of terminals 3.quick replacement of applicators, English interface 4.easy operation and maintenance  Technical Specs: Model HL-3000 Pressure capacity 3Ton Stroke 30mm Height Adjustment Voloume 10mm Power supply AC110C/220V� � � 50/60HZ Power 0.75kw 1.25kw Operating model single pedal switch Dimension 260*300*650mm Weight  45kg 0KG
Battery Type: LFP 16S1P Rated Voltage: 51.2V Rated Capacity: 100Ah Size ::610*530*190mm Weight: 54.4KG Output Port: Terminal Connectors (Customized) Charging/Discharging Method: CC/CP/VP Charging Current: 0.2C Max Charging Current :0.5C @ 25â?? Charging Cut-off Voltage: 58.4V Discharge Current: 0.5C Max Discharge Current: 0.6C @ 25â?? Discharge Cut-off Voltage: 44.8V Indicator: LED Communication Interface: RS485 / 232 / CAN Charging Temperature: 0 ~ 50 Discharge Temperature: -20 ~ 55
Vehicle mount computer is a sturdy and durable in-vehicle computer, which is suitable for various vehicles to work in complex and harsh environments. The vehicle mount terminal is suitable for commercial vehicles such as agricultural tractors, excavators, loading and transport trucks, engineering tower cranes, self-driving mining trucks, large trucks, buses, and taxi-hailing vehicles. Like the rugged mobile data terminal, the PDS vehicle mount touch PC also uses a car-grade 64-bit processor, an ANDROID operating system, and has an IP65 waterproof and dustproof rating. At the same time, through the optional built-in centimeter-level positioning module, the T10� mobile data terminal for sale� can meet the automatic or semi-automatic driving needs of agricultural, engineering, or mining vehicles. Vehicle Mount Computer Lists T10 (10.1 inch) Vehicle Mount Computer T10 is a vehicle mount computer that uses an AEC-Q100 car chipset, which is robust and reliable with an IP65 rating and can support high-precision automatic driving. T101 Vehicle Mount Computer (for Agriculture) T101 is a 10.1-inch IP65-grade vehicle mount computer, using a car-grade 64-bit processor, which can support UNICORE's UM482/UM980 or UBLOX's F9P RTK module to realize automatic driving of agr... T102 Vehicle Mount Computer (for Construction) T102 is a 10.1-inch IP65-level in-vehicle computer, using a car-grade 64-bit processor, which can support hand-held vehicle intercom, and meet the audio and video communication between fleets, vehicle... T103 Boat Mount Computer T103 is a 10.1-inch IP65 on-board computer. It supports CAN bus and RS232. At the same time, each interface is treated with anti-salt spray according to the marine application environment, which is su... T7 7 inch Vehicle Mount Computer T7 vehicle mount computer is a sturdy and durable in-vehicle computer, which is suitable for various vehicles to work in complex and harsh environments. T7 supports multiple definable buttons on the fr...
COMPATIBILITY: This ECU scan tool cable is designed to meet the requirements of the for Multiecuscan diagnostic system, perfectly compatible with the for Multiecuscan, for Fiat ECUScan. APPLICABLE CAR MODEL: The OBD adapter cable is a replacement for , replacement for , replacement for Fiat, replacement for Lancia. Enhance your car maintenance experience with this OBDII car adaptor cable SIMPLE TO OPERATE: The diagnostic cable adapter kit includes 6pcs OBD2 diagnostic cable, with different colors of connectors, easy to identify, available in for MultiECUScan software replacement for Fiat Group vehicles GREEN RED YELLOW ADAPTERS: Green ABS power steering adapter could access ABS and power steering systems, red SRS adapter to SRS systems, yellow CAN adapter to low speed CAN systems BLUE GRAY CABLES: hood adapter could access to electric hood system, blue control module cable to enhanced functions, gray base control module to basic functions https://www.youtube.com/watch?v=0pdl49mI8wc Pin Configurations: Green Adapter Lead = Female pin 7 to male pins 1,7,9,12. Red Adapter Lead = Female pin 7 to male pin 3 Yellow Adapter Lead = Female pin 6 to male pin 1 / Female pin 14 to male pin 9 / Female pin 7 to male pin 12 Purple Adapter Lead = Female pin 7 to male pins 7,8,11,13 Blue Adapter Lead = Female pin 6 to male pin 3 / Female pin 14 to male pin 11 Grey Adapter Lead = Female pin 6 to male pin 12 / Female pin 14 to male pin 13 Other Details: Cables fully tested on supported model before shipping.
COMPATIBILITY: This ECU scan tool cable is designed to meet the requirements of the for Multiecuscan diagnostic system, perfectly compatible with the for Multiecuscan, for Fiat ECUScan. APPLICABLE CAR MODEL: The OBD adapter cable is a replacement for , replacement for , replacement for Fiat, replacement for Lancia. Enhance your car maintenance experience with this OBDII car adaptor cable SIMPLE TO OPERATE: The diagnostic cable adapter kit includes 6pcs OBD2 diagnostic cable, with different colors of connectors, easy to identify, available in for MultiECUScan software replacement for Fiat Group vehicles GREEN RED YELLOW ADAPTERS: Green ABS power steering adapter could access ABS and power steering systems, red SRS adapter to SRS systems, yellow CAN adapter to low speed CAN systems BLUE GRAY CABLES: hood adapter could access to electric hood system, blue control module cable to enhanced functions, gray base control module to basic functions Pin Configurations: Green Adapter Lead = Female pin 7 to male pins 1,7,9,12. Red Adapter Lead = Female pin 7 to male pin 3 Yellow Adapter Lead = Female pin 6 to male pin 1 / Female pin 14 to male pin 9 / Female pin 7 to male pin 12 Purple Adapter Lead = Female pin 7 to male pins 7,8,11,13 Blue Adapter Lead = Female pin 6 to male pin 3 / Female pin 14 to male pin 11 Grey Adapter Lead = Female pin 6 to male pin 12 / Female pin 14 to male pin 13 Other Details: Cables fully tested on supported model before shipping.
HSFP8528-SR is a single-rate module with an operating range of 0.5m to 70m/100m over OM3/OM4 MMF (Table 1), respectively, compliant with IEEE802.3by 25GBASE-SR optical pecs. The module optical connection is duplex LC and shall be compatible with SFP+ 28Gbps and backward compatible with legacy 10G SFP+ pluggable. The SFP28 SR module is a dual directional device with a transmitter and receiver plus a control management interface (2-wire interface) in the same physical package. 2-wire interface is used for serial ID, digital diagnostics and module control function.
The FiberHTT HSFP3128-LR SFP28 25G LR Duplex 1310nm 10km transceiver is designed to transmit and receive optical data over single mode optical fiber for link length up to 10km. The module optical connection is duplex LC and shall be compatible with SFP+ 28Gbps and backward compatible with legacy 10G SFP+ pluggable. The SFP28 LR module is a dual directional device with a transmitter and receiver plus a control management interface (2-wire interface) in the same physical package. 2-wire interface is used for serial ID, digital diagnostics and module control function. The module operates by a single +3.3V power supply. LVCMOS/LVTTL global control signals, such as Module Present, Reset, Interrupt and Low Power Mode, are available with the modules. The SFP28 LR module electrical interface is compliant to OFI CEI-VSR-28G-VSR. It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. The module offers very high functionality and feature integration, accessible via a two-wire serial interface.
EV DC charger, overall dimensions 700*240*1800(mm), floor standing installation method, wiring mode down in and down out, output mode Single/Double connector, liquid cooled cable, 5M cable (optional); input frequency 45-65HZ, output voltage 200-750V/200-1000V, input voltage AC 380V �±20%, metering accuracy Level 0.5, single connector output current 0-500A/0-800A, Double connector output current 0-10000A/0-1600A; current limiting protection â?¥ 110%, interface 7 inch LCD color touch screen, LED indicator, working temperature -25--+50, operating humidity 5%-95% frost free, protection level IP54; cooling method forced air cooling, noise control Terminal noiseless.
The cable has two connectors: one is Toyota 17 Pin connector, another is 16 Pin OBD OBDII connector. The cable can be used for converting connection from Toyota 17 Pin to OBD OBDII 16 Pin interface, allows you use OBD OBDII diagnostic tools working with your Toyota vehicles with 17 Pin interface. Applicable Models: This cable can be used to convert a 17-pin connection for Mazda to an OBD OBDII 16-pin connector, allowing you to work for your Mazda Toyota using the OBD OBD2 diagnostic tool Item Details: The cable has two connectors: a 17-pin connector for Mazda Toyota cars and a 16-pin OBD OBD2 connector. The length of the connecting cable is 20cm/ 7.87in, please check your purchase requirements carefully before you buy PVC Material: Our products are made of PVC material to ensure maximum reliability and durability for long term use Professional Craft: Our products are designed with professional craftsmanship, not easy to be damaged, sensitive detection, high accuracy, and peace of mind PLEASE NOTE: Our product is just a cable/adapter, not a diagnostic tool, if you have any questions, please feel free to contact us
This reliable converter cable allows you to change your Royal Enfield's 6-pin connector into a flexible 16-pin OBD II interface. Now, you can improve the diagnostic capabilities of your Motorcycle, making it compatible with various OBD2 tools, GPS devices, and ELD. Applicable Models: This 6-pin to OBDII converter is suitable for various Royal Enfield models. Please confirm with us for specific model compatibility. If you are interested, please contact us for more information about pricing, specifications, and usage.
High Resolution 5MP USB Camera Module, a sophisticated and versatile imaging solution that seamlessly combines top-tier performance for self-media live streaming with ZOOM, alongside a robust capability for industrial defect detection. This high-end USB camera is crafted to meet the diverse needs of content creators, professionals, and industrial applications, delivering uncompromising image quality and advanced features. Detail of High Resolution 5MP USB Camera Module Features Resolution: A ov5640 5mp usb camera can capture images with a resolution of approximately 5 million pixels, which translates to 2592 x 1944 pixels. This high resolution allows for detailed and sharp images. USB Interface: The camera connects to a computer or other devices via a USB interface. USB 2.0 and USB 3.0 are common options, with USB 3.0 providing faster data transfer rates. Image Sensor: The camera is equipped with a 5MP image sensor OV5648 that captures light and converts it into digital image data. Optics: This 5MP USB cameras come with built-in lens mounts to attach various lenses for different focal lengths and imaging requirements. Frame Rate: The camera's frame rate determines how many images it can capture per second. Higher frame rates are beneficial for applications that require real-time video capture or fast-moving objects. Manual Controls: Provide Manual controls for settings such as exposure, construction, saturation, sharpness white balance, gain, and shutter speed. Software Support: We often provide ISP tuning support for getting better performance for our customers. Compatibility: This 5MP USB cameras are generally compatible with a wide range of operating systems, including Windows, Linux, macOS, and Android. Mounting Options: Standard PCB size of 9mm*62mm Triggering and GPIO: If you want General Purpose Input/Output (GPIO) pins or hardware triggering options for synchronization with external devices, we can customize for you. Keep in mind that technology advances quickly, and newer models with even higher resolutions and improved features may be available beyond 2021. For the latest information on 5MP USB cameras or any other specifications, we recommend checking with our sales or web for the most up-to-date products. Applications: High-resolution ov5648 5mp usb camera can be used for tasks that require precise imaging, such as quality control, microscopy, document scanning, and computer vision applications. They often come equipped with advanced sensors and optics to deliver clear and sharp images. For example: endoscopes, embedded systems, robotics, IoT devices and so on. Mass production capacity: 100k/month Customization: support, any kind of FPC or PCB shape, change the Lens size, customizable FOV and so on. There are many camera module manufacturers, but we are one of the best choices for you.
This is 20 Pin to OBD2 OBD 2 Female 16Pin Adapter Cable for BMW, ensuring the perfect fit and optimum connectivity. Heavy duty construction for years of service Used to convert for BMW 20 Pin to OBD OBD2 16 Pin interface.Allows you connect the OBD interface diagnostic tools to for BMW vehicles with a 20 Pin interface Engineered to provide seamless connectivity between your OBD2 scanner and your BMW vehicle, this cable makes it easier than ever to diagnose and troubleshoot any vehicle issues. Crafted to the highest standards, the cable boasts of sturdy construction and reliable performance. This cable is particularly suitable for BMW models from 1982 to 2001, including E28, E30, E34, E36, E38, E39, E46, Z3, and the Old M3. it offers broad usability and compatibility, providing an essential tool for vehicle diagnostics.
Fiat Chrysler vehicles from 2018 may be equipped with a Security Gateway Module. This allows you to scan the vehicle for codes, but not the ability to clear codes or any active tests, bidirectional controls, or PIN read. With the Chrysler 8 Pin Male-8 Pin,12 Pin Male-12 Pin Female Extension Cable, you can access the vehicle network and perform all commands. This connector allows you to read and clear fault codes, view the data stream, active test, and ECU programming. With this Connector, you get a stable transmission and access to all the vehicleâ??s information. Stable Transmission: OBD2 Diagnostic Cable is a great replacement for the old cable, providing stable transmission and safe connection. Durable Material: Diagnostic cable connector is made of ABS and rubber material, anti aging, high flexibility, not easy to crack.
