Specifications JIS G3313 SECC Usage Furniture, Computer Case, Electronic Parts, Electrical Equipment Type of Surface Treatment Chromate Treatment, Phosphate Treatment, Oiling Available Size Thickness: 0.3~1.6mm Width: 850~1580mm Coating Weight: 10-30g/m (single side) Max. Coil Weight: 20 MT
The G I. Wire of 3.15mm dia x 4.00mm dia with tolerance of +or- 2.5 % in dia as per IS:280/1978 with latest amendment/revision if any. Yes 2) The G. I. Wire shall drawn from soft wire having tensile strength 450-550 N/mm2 Yes 3) Breaking Load shall be as under : for G. I. Wire 3.15mm dia x 339.3 to 459.2 for G. I. Wire 4.00 mm dia 544 to 740.54 Yes Yes 4) Zinc coating shall be as under i) Heavy coating IS : 4826/78 ii) How dip galvanizing, weight of zinc coating when tested IS : 4826/79 iii) The quality of zinc shall be as per IS : 209/1992 iv) No. of dip guaranteed. 3 Nos. of 1 minute dips & 1 No. 1/2 minute dip as per IS:2633/1986 Yes Yes Yes
Thermal Rating: 130 / 155 / 180 UL Recognized Class 130 Product TYPU-130 / TYA1-130. UL Recognized Class 155 Product TYPU-F155 / TYAI-U155, and 180 Product TYFU-H180. ... UEW is a film insulation composed of Polyisocy-anate & Polyol.
Round, soft, or annealed copper wire for electrical purposes. The tinned wire shall conformto the required tensile strength and elongation. Electrical resistivity shall be measured. ... The tin coating shall be firmly adherent to the surface of the copper.
2 Tensile properties of the wire shall be as follows: Tensile strength of galvanized M.S. Wire shall be 300 550 N/mm2. 4.1. 3 Type of coating of galvanise shall be heavy as per IS: 4826 1979 and the wires shall be galvanized after drawing & annealing.
6.5mm SAE1008. 5.5mm SAE 1008. 5.5mm SAE 1006. Wire rod: SAE 1015 diameter: 22.32mm. Wire rod: SAE 1015 diameter: 25.62mm. Wire rod: SAE 1015 diameter: 20.72mm. Wire rod: SAE 1020 diameter: 27.12mm. Wire rod: PL22 (10B22MOD) diameter: 18.02mm.
Nominal Conductor Diameter (mm) Tollerance + (mm) Weight of Poly Wrapped (kg/km) 0.4 0.004 1.467 0.5 0.005 2.154 0.6 0.006 2.98 0.7 0.007 3.946
Wire Thickness( 2 Strand wires) : 2.5mm(12SWG) Barb Spacing : 3 to 5inches Length Per KG : 6 Meter /20 Feet Approx Bundle Weight : 25 to 30 KG Length per bundle : Approx 168 Mtr / 550 Feet
Diameter 0.30 mm to 16.00 mm Material High Carbon Steel Size 0.30 mm to 16.00 mm Surface Finish BLACK & GALVANIZED Coil Weight 10 to 1000 kg
Diameter 0.30 mm to 16.00 mm Material High Carbon Steel Size 0.30 mm to 16.00 mm Surface Finish BLACK & GALVANIZED Coil Weight 10 to 1000 kg
composed of 80 percent nickel & 20 percent chromium, and meets ASTM B267 standards for resistance wire. Our nichrome wire has an appreciable temperature rating of 1177 C (2150 F), is corrosion resistant, and resists oxidation even at high temperatures.
Standard: ASTM, BS, DIN, GB. Wire Diameter: 4.00mm-12.00mm. ... Prestressed PC Steel Wire. Nominal Diameter, mm(in) Tensile Strength, min, Mpa (psi) Type BA Type WA 6.35(0.250) 1655(240 000) 1655(240 000) 7.01(0.276) 1620(235 000) 1620(235 000)
Diameter 0.30 mm to 16.00 mm Material High Carbon Steel Size 0.30 mm to 16.00 mm Surface Finish BLACK & GALVANIZED Coil Weight 10 to 1000 kg
Finished: Hot dip Galvanized. Tension strength: 700-800 N/mm2. Wire diameter: 2.10 mm. Tolerance: + 0.025 mm / - 0.025 mm. Thickness of Zinc coating: 15-17 g/m2. Coil dimensions: inner diam. about 400 mm. Outer diam: 900 mm. Height: 750 mm.
Steel wool grades and fiber thickness Steel wool is made by shaving thin layers of steel from wires. Steel wool consists of long and relatively strong shavings with sharp edges.
Bus bar wire is an uninsulated, unshielded, and unjacketed single wire type of conductor. It is commonly used as feeder lines from a bus bar. This means that bus bar wire is used to distribute power from a centralized bus bar to outlying equipment. Since it is a single piece of wire, it is solid rather than stranded.
2 Tensile properties of the wire shall be as follows: Tensile strength of galvanised M.S. Wire shall be 300 â?? 550 N/mm2. 4.1. 3 Type of coating of galvanise shall be heavy as per IS: 4826 â?? 1979 and the wires shall be galvanised after drawing & annealing.
High Tensile Wire Standard: Both GB/T 20118-2006, DIN, EIPS are available. Nominal tensile strength (Mpa): 1570, 1770, 1870, 1960 etc. Quality control: ISO 9001 etc. High Tensile Wire Diameter: 4 / 4.5 / 4.8 / 5 / 6 / 6.25 / 7 / 8 / 9 / 10 / 12mm. Tolerance: +/-0.05mm. Elongation: 3.5.
Copper wires (Millberrry).
Welding Wire Rod
