Bitumen is a black or dark-colored (solid, semi-solid, viscous), amorphous, cementitious material that can be found in different forms, such us rock asphalt, natural bitumen, tar and bitumen derived from oil, which is referred to as petroleum bitumen. Currently most of the roads globally are paved with bitumen. Bitumen is applied in construction and maintenance of: Highways, Airport runways, Footways and many other applications. Known for its adhesive and cohesive assets, bitumen is mostly utilised in the construction industry. Bitumen is applied on road paving because it is viscous when hot, but solid once it cools down. Price: Gross $ 330.00/Net $320.00 per Metric Ton Trial Shipment: One Hundred Thousand (100,000) Metric Tons Available Discharging Port: CIF safe world port
Aviation Kerosene Colonial Grade 54 Jet Fuel JP 54: Jet fuel A-1 Aviation fuel is a specialized type of petroleum-based fuel used in aircraft powered by gas-turbine engines. It is generally of a higher quality than fuels used in less critical applications, such as heating or road transport, and often contains additives to reduce the risk of icing or explosion due to high temperature, among other properties. It is clear to straw-colored in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A-1 are produced to a standardized international specification. Price: Gross $52.00/Net $ 50.00 per Barrel Trial Shipment: Two Million (2,000,000) Barrels Available Discharging Port: CIF safe world port
Light cycle oil (LCO) is a diesel boiling range product from fluid catalytic cracking units. The optimised partial conversion hydrocracking process provides an effective and flexible process to process LCO into desired products such as very-low Sulphur diesel and high- octane high-aromatics naphtha. Price: Gross $290.00/Net $280.00 per Metric Ton Trial Shipment: One Hundred Thousand (100,000) Metric Tons Available
Petroleum is derived from oil refining and is one type of group of fuels referred to as cokes. It has many industrial uses, including the production of batteries, steel and aluminium, also used as fuel in coal-fired power plants and cement kilns Price: Gross $100.00/Net $90.00 per Metric Ton Trial Shipment: One Hundred Thousand (100,000) Metric Tons Available
Mazut-100 is a fuel oil that is manufactured to GOST specifications. This product is typically used for larger boilers in producing steam since the BTU content is high. Price: Gross $350.00/Net $340.00 per Metric Ton Trial Shipment: One Hundred Thousand (100,000) Metric Tons Available
Diesel (D2) is a refinery abbreviation for Gasoil. It is the second distillate from the processing of crude oil. It can be used without reformers and additives. Origin: Russian Federation / Republic of Kazakhstan Price: Gross $310.00/Net $300.00 per Metric Ton Trial Shipment: One Hundred Thousand (100,000) Metric Tons Available Loading Port: Novorossiysk /Premorskiy/ Ust Luga / Port of AKTAU (KZAAU) Discharging Port: CIF safe world port
Petroleum By Products Minimum Quantity: 50,000MT per Month Maximum Quantity: 400,000MT per Month CIF FOB Price: GROSS USD $80.00 / NET USD $ 70.00
SULPHUR GRANULAR- Sulphur Hunk, Sulphur Powder - Minimum Quantity: 5,000 Metric Tons per Month Maximum Quantity: 200.000 Metric Tons per month
UREA 46% PRILLED & SULFUR GRANULAR Minimum Quantity: 10,000 Metric Tons per Month Maximum Quantity: 50,000 Metric Tons Month
EXPORT BLEND CRUDE (REBCO) GOST 51 858-2002 / GOST 9965-76 Minimum Quantity: 10,000 Barrels per Month Maximum Quantity: 3,000,000 Barrels per Month
VIRGIN FUEL OIL D6 - LOW SULFUR - Minimum Quantity: 400,000,000 Gallons per Month Maximum Quantity: 800,000,000 Gallons per Month
AVIATION KEROSENE COLONIAL GRADE 54 JET FUEL - Minimum Quantity: 500,000 Barrels per Month Maximum Quantity: 5,000,000 Barrels per Month
Lowest Prices for Light Naphtha. Product specifications as below: Density @ 15DC MAX 700 Kg/m3 Test Method - ASTM D1298 I.B.P MIN 35 DC Test Method - ASTM D86 10% Evaporated temp MAX 60 DC Test Method - ASTM D86 50% Evaporated temp MIN 85 DC Test Method - ASTM D86 95% Evaporated temp MAX 125 DC Test Method - ASTM D86 F.B.P MAX 150 DC Test Method - ASTM D86 Residue MAX 1.5 % Vol Test Method ASTM D86 Loss Max 1 % Vol Test Method ASTM D86 Total Sulphur MAX 0.03 % Wt Test Method ASTM D1266 Corrosion 3 HRS No 1 strip 50 DC Test Method ASTM D13 Vapour Pressure MAX 75 K.Pa Test Method ASTM D32 Mercaphtan Content MAX 25 PPM Test Method ASTM D322 Colour, Saybolt 20 min Test Method D156 Paraffins Content MIN 70 % VolTest Method ASTM D131 Oleffins Content MAX 2 % VolTest Method ASTM D131 Naphthense Content MIN 10 % VolTest Method ASTM D131 Aromatics Content MIN 5 % Vol Test Method ASTM D131 Lead (PB) P.P.B MAX 40 UopTest Method 350-68T C/H Ratio MAX 5.5Gum Existent (air jet) MAX 3 Mg/100mlTest Method ASTM D381g
Density @ 15 DC - Max 970 Kg/M3. Test Method - D1298 Kinematic Viscosity @ 50 DC - Max 280 CST. Test Method D-445 Visco.Rodwood1@37.7 DC - MAX 2500 SECS Pour Point - MAX 24 DC. Test Method D-97 Flash Point - MIN 65 DC. Test Method D-93 Sulphur Total - Max 3.5 Wt%. Test Method D-1552 Carbon Residue (Conradson) - MAX 15 WT%. Test Method D-189 Ash - MAX 0.05 WT%. Test Method D-482 Water & Sediment - MAX 0.5 VOL% Test Method D-1796 Calorific Value (Higher) - MIN 41.8 MJ/KG
FUEL OIL 380 CST AVAILABLE AT ATTRACTIVE PRICE. CURRENTLY CARGO IN FUJAIRAH HIGH SEAS!!! Lowest prices in middle east! density @ 15 dc - max 990 kg/m3. Test method - d1298 kinematic viscosity @ 50 dc - max 380 cst. Test method d-445 pour point - max 32 dc. Test method d-97 flash point - min 65 dc. Test method d-93 sulphur total - max 3.5 wt%. Test method d-1552 carbon residue (conradson) - max 15 wt%. Test method d-189 ash - max 0.15 wt%. Test method d-482 water & sediment - max 1.0 vol% test method d-1796 calorific value (higher) - min 41.7 mj/kg
Lowest Prices for Light Naphtha. Product specifications as below: Density @ 15DC â?? MAX 700 Kg/m3 Test Method - ASTM D1298 I.B.P â?? MIN 35 DC Test Method - ASTM D86 10% Evaporated temp â?? MAX 60 DC Test Method - ASTM D86 50% Evaporated temp â?? MIN 85 DC Test Method - ASTM D86 95% Evaporated temp â?? MAX 125 DC Test Method - ASTM D86 F.B.P â?? MAX 150 DC Test Method - ASTM D86 Residue â?? MAX 1.5 % Vol Test Method â?? ASTM D86 Loss â?? Max 1 % Vol Test Method â?? ASTM D86 Total Sulphur â?? MAX 0.03 % Wt Test Method â?? ASTM D1266 Corrosion 3 HRS â?? No 1 strip 50 DC Test Method â?? ASTM D13 Vapour Pressure â?? MAX 75 K.Pa Test Method â?? ASTM D32 Mercaphtan Content â?? MAX 25 PPM Test Method â?? ASTM D322 Colour, Saybolt â?? 20 min Test Method â?? D156 Paraffins Content â?? MIN 70 % Vol Test Method â?? ASTM D131 Oleffins Content â?? MAX 2 % Vol Test Method â?? ASTM D131 Naphthense Content â?? MIN 10 % Vol Test Method â?? ASTM D131 Aromatics Content â?? MIN 5 % Vol Test Method â?? ASTM D131 Lead (PB) P.P.B â?? MAX 40 Uop Test Method â?? 350-68T C/H Ratio â?? MAX 5.5 Gum Existent (air jet) â?? MAX 3 Mg/100ml Test Method â?? ASTM D381
Lowest Prices for Heavy Naphtha. Product specifications as below: Density @ 15DC â?? MAX 0.758 Kg/m3 Test Method - ASTM D1298 Distillation 10% Evaporated temp â?? MAX 120 DC Test Method - ASTM D86 50% Evaporated temp â?? MIN 115 DC Test Method - ASTM D86 95% Evaporated temp â?? 150-170 DC Test Method - ASTM D86 F.B.P â?? MAX 180 DC Test Method - ASTM D86 Residue â?? MAX 1.5 % Vol Test Method â?? ASTM D86 Loss â?? Max 1 % Vol Test Method â?? ASTM D86 Total Sulphur â?? MAX 0.08 % Wt Test Method â?? ASTM D1266 Corrosion 3 HRS â?? No 1 strip 50 DC Test Method â?? ASTM D130 Vapour Pressure â?? MAX 27 K.Pa Test Method â?? ASTM D323 Mercaphtan Content â?? MIN 70 PPM Test Method â?? ASTM D3227 Colour, Saybolt â?? 20 min Test Method â?? D156 Paraffins Content â?? MIN 50 % Vol Test Method â?? ASTM D1319 Oleffins Content â?? MAX 1.5 % Vol Test Method â?? ASTM D1319 (Naphthens + Aromatics) Content â?? MIN 10 % Vol Test Method â?? ASTM D1319 Lead (PB) P.P.B â?? MAX 40 Uop Test Method â?? 350-68T C/H Ratio â?? MAX 6 Gum Existent (air jet) â?? MAX 2.5 Mg/100ml Test Method â?? ASTM D381 Oxygenates â?? MAX 60 PPM Test Method â?? ASTM D4815
Lowest prices for GAS OIL 500 PPM. Product specifications as below: Density @ 15 DC â?? 820-860 Kg/m3 Test Method â?? ASTM D1298 Distillation Recovered @ 357 DC â?? Min 90 Vol% Test Method â?? ASTM D86 F.B.P â?? MAX 385 DC Test Method â?? ASTM D86 Colour â?? MAX 3 Test Method â?? ASTM D1500 Flash Point â?? MIN 54 DC Test Method â?? ASTM D93 Sulphur Total â?? MAX 0.05 wt% Test Method â?? ASTM D1552 Corrosion-3hrs@100 DC â?? 1 a Test Method â?? ASTM D130 Viscosity Kinematic @ 37.8 DC â?? 2.0-5.5 c.St Test Method â?? ASTM D445 Cloud Point â?? MAX 2.0 DC Test Method â?? ASTM D2500 Pour Point â?? MAX -3.0 Test Method â?? ASTM D97 Carbon Residue (on 10% Bottoms) â?? MAX 0.1 wt% Test Method â?? ASTM D189 Ash â?? MAX 0.01 wt% Test Method â?? ASTM D482 Water & Sediment â?? MAX 0.05 Vol% Test Method â?? ASTM D2709 Cetane Index â?? MIN 49 Test Method â?? ASTM D976
LOWEST PRICES FOR GAS OIL 0.5%. PRODUCT SPECIFICATIONS AS BELOW: Density @ 15 DC â?? 820-860 Kg/m3 Test Method â?? ASTM D1298 Distillation Recovered @ 357 DC â?? Min 90 Vol% Test Method â?? ASTM D86 F.B.P â?? MAX 385 DC Test Method â?? ASTM D86 Colour â?? MAX 3 Test Method â?? ASTM D1500 Flash Point â?? MIN 60 DC Test Method â?? ASTM D93 Sulphur Total â?? MAX 0.5 wt% Test Method â?? ASTM D1552 Corrosion-3hrs@100 DC â?? 1 a Test Method â?? ASTM D130 Viscosity Kinematic @ 37.8 DC â?? 2.0-5.5 c.St Test Method â?? ASTM D445 Cloud Point â?? MAX 2.0 DC Test Method â?? ASTM D2500 Pour Point â?? MAX -3.0 Test Method â?? ASTM D97 Carbon Residue (on 10% Bottoms) â?? MAX 0.1 wt% Test Method â?? ASTM D189 Ash â?? MAX 0.01 wt% Test Method â?? ASTM D482 Water & Sediment â?? MAX 0.05 Vol% Test Method â?? ASTM D2709 Cetane Index â?? MIN 49 Test Method â?? ASTM D976
LOWEST PRICES FOR GAS OIL 1%. PRODUCT SPECIFICATIONS AS BELOW: Density @ 15 DC â?? 820-860 Kg/m3 Test Method â?? ASTM D1298 Distillation Recovered @ 357 DC â?? MIN 90 Vol% Test Method â?? ASTM D86 F.B.P â?? MAX 385 DC Test Method â?? ASTM D86 Colour â?? MAX 3 Test Method â?? ASTM D1500 Flash Point â?? MIN 54 AND 60 DC Test Method â?? ASTM D93 Sulphur Total â?? MAX 1 wt% Test Method â?? ASTM D1552 Corrosion-3hrs@100 DC â?? 1 a Test Method â?? ASTM D130 Viscosity Kinematic @ 37.8 DC â?? 2.0-5.5 c.St Test Method â?? ASTM D445 Cloud Point â?? MAX 2.0 DC Test Method â?? ASTM D2500 Pour Point â?? MAX -3.0 Test Method â?? ASTM D97 Carbon Residue (on 10% Bottoms) â?? MAX 0.1 wt% Test Method â?? ASTM D189 Ash â?? MAX 0.01 wt% Test Method â?? ASTM D482 Water & Sediment â?? MAX 0.05 Vol% Test Method â?? ASTM D2709 Cetane Index â?? MIN 49 Test Method â?? ASTM D976
