FENG MEI (CTS) for machine tools offer pressure from 20 bar to 300bar. For applications of machining precision parts, During parts machining, lots of heat is generated would deform parts, crack the tools, or even unintentionally heat treating the parts. In the meantime CTS SYSTEM comes in to provide cooling effect, quench the metal chips and flush them away from the parts. This produces better parts, allows more efficiency and greatly extend the life of the cutting tools.
Direct centrifugal fans are a line of industrial fans that have many useful applications today. Widely used for industrial parks, factories, workshops or high-rise buildings, shopping malls... areas with large areas. Model: SCD-BNo Capacity: 0.75kW-30kW Voltage: 220V-380V Flow: 1500m3/h-60000m3/h Pressure: 200Pa-1300Pa
Indirect centrifugal fans are centrifugal fans whose motor structure is indirectly attached to the impeller through a belt or hard joint. Indirect centrifugal fans have all the same functions and roles as other centrifugal fans . That is the movement of air and gases entering at a certain angle compared to the direction of the incoming fluid. Product name: Indirect centrifugal fan Model: SCI-TNo Capacity: 0.2 kW - 300 kW Voltage: 380V Flow: 2000m3/h - 55000m3/h Pressure: 300Pa - 13000Pa
Indirect axial fans are axial fans with a motor structure designed to connect indirectly to the impeller through a belt. This line of fans is similar to other axial fans, which have suction and blowing directions parallel to the fan axis. Model: SAI-CNo Power: 0.37 - 30kW Voltage: 220 - 380V Flow: 1000 - 58000 m3/h Pressure: 100 - 900 Pa Transmission: indirect via belt Standard size: D300mm-D1200mm
Direct axial fan is a type of axial fan with a motor structure attached directly to the fan blades. This helps to increase the rotational force of the wings, creating quite a large amount of wind flow. Model: SAD-CNo Power: 0.37 - 37kW Voltage: 220 - 380V Flow: 2000 - 65000 m3/h Pressure: 120 - 1300 Pa Drive: direct
BC121 is a bead form polystyrene sulphonate cation exchange resin containing 8% DVB. It has excellent physical and chemical properties such as high capacity and operating capacity, lower pressure drop, well physical and chemical stability. The product is supplied in the sodium or hydrogen forms. BC121 is used in all water softening, dealkalization, deionization, preparation of pure water and ultra-pure water, food industry, pharmaceuticals and chemical processing applications.
Sesame is used as a cooking oil, garnish for decorating some of the light foods like fish and desserts, sesame bars, as ground into a paste making desserts . Sesame seeds are commonly added to certain foods to provide a nutty flavor and crunchy texture. same seeds are rich in protein, vitamins, minerals, and antioxidants. A meta-analysis showed that sesame consumption produced small reductions in both systolic and diastolic blood pressure.
Features: 1.super mute crimping machine, low noise 2.high quality cable making machine, for all kinds of terminals 3.quick replacement of applicators, English interface 4.easy operation and maintenance Technical Specs: Model HL-4000A(N) Pressure capacity 4Ton Stroke 30mm Height Adjustment Voloume 10mm Power supply AC220V�  50/60HZ Power 1.25kw Operating model single pedal switch Dimension 310*270*710mm Weight 75KG
Clay Brick Making Machines are an ideal choice for people who need to produce a large amount of mud bricks in a short period of time. They are designed to handle intense pressure up to 0.6MPa and come with a CE ISO certificate for reliable operation. The machine is composed of a strip cutter, belt conveyor and brick cutter, making the whole process automatic and efficient. Besides, the size of the machine is small enough to fit into a single 20-foot container, making it very convenient to transport.
The H series twin-screw feed extruder is primarily used for the production and processing of various floating, sinking, and slow-sinking aquatic feeds. It can meet various customer demands, including 0.6mm aperture floating and 0.8mm aperture sinking small particles, low-starch formulations, high-protein, high-fat California seabass, and large-grain grouper. It can be equipped with vacuum extraction and pressure density control systems, combined with a fully automatic control system to ensure equipment stability and enhance the quality of extruded products.
F-01 serial for polyester POY FDY filament spinning as an economic filtration media; S-03 serial for improve yarn quality, a high mechanical strength and less oxidization sensitive steel powder; For the application of high initial pressure, S-04 is desirable choice for its enhanced resistance to compressibility, substantially inert to polymer melts, especially for the application of PA filament spinning.
â?¢ 16 mm and 20 mm continuous polyethylene drip irrigation pipes with integrated pressure-compensated drippers â?¢ Each dripper is equipped with dual water inlets and outlets â?¢ Newly formulated silicone membrane to ensure accurate and reliable performance of different water qualities and chemicals The role of chemicals and fertilizers â?¢Special double filter and flushing mechanism to achieve maximum anti-clogging performance and self-cleaning ability
MACHINE FEATURES: Automatic feed and crimp connection can be completed once for all .Equipped with a protective unit on the crimp connection point and it is safe and convenient for operation. A green hand is easy to be skilled for operation. Parameters of product: Model HL-501/2/3 Votage AC220V/50HZ Production capacity 800-1000PCS/H Punching force 3T Pressure of air source 0.5-0.7MPa Dimension 1250(L)*700(W)*1700(H) Weight 260KG
Metal chip press machine introduction: The scrap metal briquetting machine uses hydraulic system to drive the hydraulic cylinder, the output of high pressure will be metal chips, powder and other metal raw materials cold pressed into cylindrical cake, molding at the same time to ensure that the original material remains unchanged. Convenient for storage and transportation, reduce the loss in the recycling process.
Condition: New Place of Origin: Germany Capacity:1000L Dimension(L*W*H):1200*1000*1150(�±5) mm Weight:56�±1 kg Max. Working Pressure(MPa):0.1 MPa Material: HDPE & galvanized steel Shape: Square Color: White Certification: UN/ISO Filling opening:DN150 Discharge opening:DN50 Type of valve:DN50 ball valve or DN50 butterfly valve
Ethylene Vinyl Acetate Co-polymers EVA is manufactured by Dow autoclave high-pressure process and designed for a variety hot melt adhesive applications. EVA is well known for its excellent adhesive properties, mixing properties with other raw materials, and high-quality assurance. FEATURES: Excellent Adhesive properties - high Wet Tack Good Creep Resistance
Ethylene Vinyl Acetate Co-polymers EVA is manufactured by Dow autoclave high-pressure process and designed variety hot melt adhesive applications. EVA is well known for its excellent adhesive property, mixing property with other raw materials, and high-quality assurance FEATURES: Excellent Adhesive * Property * High Wet Tack * Good Creep Resistance *Water Resistance
APPLICATIONS Solvent recovery Oil and gas recovery Catalyst support Pressure swing adsorption Raw Materialsï½?Bamboo Specificationsï½? CTC: 35-80% Iodine Number: 800-1350mg/g Bulk Density: 320-470kg/m�³ Ash Content: 15% max. Moisture: 5% max. Hardness:92-99% PH: 9-11 Particle Size: 1.5mm, 2mm,3mm,4mm Featuresï½? Large specific surface area High hardness Strong adsorption capacity, fast speed
APPLICATIONS Solvent recovery Oil and gas recovery Catalyst support Pressure swing adsorption Raw Materials Bamboo Specifications CTC: 35-80% Iodine Number: 800-1350mg/g Bulk Density: 320-470kg/m³ Ash Content: 15% max. Moisture: 5% max. Hardness:92-99% PH: 9-11 Particle Size: 1.5mm, 2mm,3mm,4mm Features Large specific surface area High hardness Strong adsorption capacity, fast speed
New Energy Equipment Division The new energy equipment includes national standard, American standard, Japanese standard and classification society's LPG and NG and CNG and various liquid storage tank equipment, supporting a variety of materials and sizes of the vaporization device and decompression device and pump unit composition. According to the customer's medium and pressure and different requirements to choose different materials and use the standard and size type!
