1. The brief introductions of 15 meters crawler rotary pile drilling rig with circular power rod With hydraulic crawler retractable chassis, self-lifting and falling foldable drill mast, Telescopic drill pipe, rotary pile drilling rig with circular power rod is a kind of construction machinery suitable for drilling in building foundation engineering. It is mainly suitable for the construction of sandy clay silty soil and other soil layers. It is widely used in the construction of cast-in-place piles continuous walls foundation reinforcement and so on. Compared with the ordinary rotary drilling rig,rotary pile drilling rig with circular power rod has many objective advantages, such as drilling the concrete ground, the hard sand soil layer, the rock layer and so on. It is suitable for large engineering construction, high speed rail and railway construction. The machine works with fast speed, high efficiency, good drilling quality, oil saving and durable. 2.The features of 15 meters crawler rotary pile drilling rig with circular power rod The folding mast structure is adopted. The structure is simple and exquisite, and its durability is good. The whole machine has good stability, cost saving and convenient maintenance. The upper guide structure ensures the perpendicularity of the drill pipe and the ground, so that the construction is more convenient, the construction efficiency is improved, and the safety is increased. The power head adopts the original patented structure, the design is more reasonable, the lubrication is reliable, the power is strong, the cost is economic, and it is not easy to damage, so it is easy to maintain. The main winch is equipped with imported hydraulic motor, which has a sensitive response and can be freely lowered when used. The lifting speed can reach up to 82m/min, which greatly improves the construction efficiency. The main winch is placed at the right front side of the operator, so that the operator can observe the working condition of the main winch at any time and avoid the phenomenon of disorder caused by other factors.
1.Brief introductions of ZDY-1600S full hydraulic tunnel drilling rig ZDY1600S full hydraulic tunnel drilling rig is a full hydraulic power head mechanism, which is divided into three main parts, main engine, pump station and control table. It is easy to disassemble and convenient to transport. The drilling rig structure is arranged with great flexibility. Also, we provide mechanical unload drilling tools, chuck, clamp and oil cylinder. Revolving device and gripper can operate in linkage, Therefore, the drilling rig is highly automated, made the drilling rig efficient and easy to operate. The ZDY1600S full hydraulic tunnel drilling rig adopts double pump system. The rotation parameters and the input parameters are independently mediated, which improves the adaptability of the drilling machine to various drilling technology; it is convenient to save force by adjusting the inclination angle of the fuselage with the support oil cylinder; the rotary device adopts the through hole structure. And the length of the drill pipe is not limited to the process. The worker can operate from afar, so itâ??s good in flexibility and safety. 2. Specifications of ZDY-1600S full hydraulic tunnel drilling rig Project Unit Parameter Maximum drilling depth m 250/80 Open hole diameter mm Ф113/Ф128 End hole diameter mm Ф150/Ф200 Drilling pipe diameter mm Ф63.5/Ф73 Drilling angle ° 0-±90 Output torque n.m 900-1600 Rated advance speed m/s 0-0.2 The applicability of the strength coefficient of coal and rock fâ?¦10 Main engine dimension size mm 2300*950*1500 Total weight (excluding the drill rod) kg 1900 Main engine weight kg Motor power kw 30 Shandong Master Machinery Group Co.,Ltd. Sales Manager:Coco Yan Tel:0086-537-2335787 Mob: 0086-18865479508 Wechat:008618865479508 Whatsapp:008618865479508 QQ:2648769002 E-mail:sale05@huaxiamaster.com Website:www.huaxiamaster.com
1. Brief introductions of KQZ-70D pneumatic-electric DTH drilling rig KQZ-70D pneumatic-electric DTH drilling rig is a new type of high efficient drilling rock equipment designed for water conservancy projects and construction sites. It is widely used for drilling in all kinds of rock strata in open pit, water conservancy and construction slope treatment. KQZ-70D pneumatic-electric DTH drilling rig is a percussive rotary drilling rig. Its internal structure is different from that of a general jack drill. Its valve train and reciprocating piston mechanism are independent, that is impactor. The front is directly connected to the bit, and the back is connected to the drill pipe. when drilling the rock, the impactor dive the hole. The piston (hammer body) in the impactor is made reciprocating to strike the drill tail through the valve, making the drill produce a kind of gyration force to the rock bottom. 2. Features of KQZ-70D pneumatic-electric DTH drilling rig Small in size, light in weight, suitable small space that large and medium-sized drilling rig can not work , convenient and flexible. 3.Specifications of KQZ-70D pneumatic-electric DTH drilling rig KQZ-70D Borehole diameter mm 50-80 Drilling depth m 10-15 Rotating speed r/min 112 Air consumption m³/min 3.5-4.5 Cylinder diameter mm 90 Drilling pipe mm 42 Motor power kw 3 Main engine length mm 1524 Main engine weight kg 148
1.Brief introductions of KQZ-100D pneumatic-electric DTH drilling rig KQZ-100D pneumatic-electric DTH drilling rig is a new type of high efficient rock drilling equipment, designed for water conservancy projects and building materials sites. It is widely used for drilling in all kinds of rock stratum and drill hole. For example, water conservancy and construction slope treatment. KQZ-100D pneumatic-electric DTH drilling rig is an impact rotary drilling rig. Its internal structure is different from the general drilling machine. Its gas distribution and piston reciprocating mechanism are independent with each other. The front end is directly connected to the bit, and the back end is connected to the drill pipe. When it is divided into the hole, the impactor will rotate in hole. the piston (hammer body) in the impactor is made reciprocating to strike the drill tail through the valve, making the drill produce a kind of gyration force to the rock bottom. 2.Features of KQZ-100D pneumatic-electric DTH drilling rig Small volume, light weight, suitable for large and medium-sized drilling rig can not workplace, convenient and flexible. 3.Specifications of KQZ-100D pneumatic-electric DTH drilling rig KQZ-100D Borehole diameter mm 65-150 Borehole depth m 20-25 Rotating speed of drilling tools r/min 90 Air consumption m³/min 6-8 Cylinder diameter mm 150 Drilling pipe mm 50/ 60 Motor power kw 4 Main engine length mm 2400 Main engine weight kg 224
1.Brief introductions of KQZ-100 pneumatic DTH drilling rig KQZ-100 pneumatic DTH drilling rig is a new type of high efficient rock drilling equipment designed for water conservancy projects and building materials sites. It is widely used for drilling in all kinds of rock stratum and drill hole. For example, water conservancy and construction slope treatment . KQZ-100 pneumatic DTH drilling rig is an impact rotary drilling rig. Its internal structure is different from the general drilling machine. Its gas distribution and piston reciprocating mechanism are independent with each other. The front end is directly connected to the bit, and the back end is connected to the drill pipe. When driving the hole, the impactor will rotate in the hole. The piston (hammer body) in the impactor is made reciprocating to strike the drill tail through the valve, making the drill produce a kind of gyration force to the rock bottom. 2. Features of KQZ-100 pneumatic DTH drilling rig Small volume, light weight, suitable for large and medium-sized drilling rig can not workplace, convenient and flexible. 3. Specifications of KQZ-100 pneumatic DTH drilling rig KQZ-100 Borehole diameter mm 65-150 Borehole depth m 20-25 Rotating speed of drilling tools r/min 68-85 Air consumption m³/min 10-13 Cylinder diameter mm 150 Drilling pipe mm 50/ 60 Motor power kw 4.4 Main engine length mm 2400 Main engine weight kg 190
Characteristics of XY-44A hydraulic core drilling rig XY-44A is a hydraulic core drilling rig suitable for high-speed medium and deep borehole drilling in complex rock formation. HuaxiaMaster core drilling rigs covers all the main foundation and drilling technologies with a range of models whose characteristics, capability and performance find application in every operating condition. 2. Applications of XY-44A hydraulic core drilling rig ·Core drilling rig ·Engineering geology exploration, ·hydrology and core drilling ·large diameter foundation piles construction 3. Parameters of XY-44A hydraulic core drilling rig XY-44A hydraulic core drilling rig Drilling depth 600-1400m Max open hole caliber 300mm End hole caliber 75mm Drilling rod diameter 60mm Drilling angle 90-65 Drill rig moving stroke 450mm Spindle Spindle speed ( Diesel Engine) Forward 60 97 169 187 276 301 284 487 521 847 1180 1490r/min Reverse 65 201r/min Spindle speed ( Electric Motor) Forward 50 81 141 155 230 251 320 406 434 706 984 1247r/min Reverse 54 167r/min Spindle stroke 600mm Spindle max. pressure force 90kn Spindle inner diameter 96mm Lifting capacity 120kn Main hoist Max.single line lifting capacity 45kn Max.single line lifting speed 0-45m/s Wire rope caliber 17.5-18.5mm Hoist capacity of wire line 90-110m Roller diameter 140mm Wirerope diameter 6mm Wire rope length 450m Mud pump Type BW-250 Displacement 250 l/min Work pressure 80kg/cm² Water inlet pipe diameter 75 mm Water outlet pipe diameter 50 mm Power Diesel engine YC4E135-1 81KW Electric motor Y225S-4 37KW
Characteristics of XYX-44A wheeled hydraulic core drilling rig XY-44A wheeled hydrulic core drilling rig is a multi-purpose spindle diamond core drilling rig suitable for high-speed medium and deep borehole drilling in complex rock formation. HuaxiaMaster core drilling rigs covers all the main foundation and drilling technologies with a range of models whose characteristics, capability and performance find application in every operating condition. 2. Applications of XYX-44A wheeled hydraulic core drilling rig ·Core drilling rig ·Engineering geology exploration, ·Hydrology and core drilling ·Large diameter foundation piles construction 3. Parameters of XYX-44A wheeled hydraulic core drilling rig XYX-44A wheeled hydraulic core drilling rig Drilling depth 600-1400m Max open hole caliber 300mm End hole caliber 75mm Drilling rod diameter 60mm Drilling angle 90-65 Drill rig moving stroke 450mm Spindle Spindle speed ( Diesel Engine) Forward 60 97 169 187 276 301 284 487 521 847 1180 1490r/min Reverse 65 201r/min Spindle speed ( Electric Motor) Forward 50 81 141 155 230 251 320 406 434 706 984 1247r/min Reverse 54 167r/min Spindle stroke 600mm Spindle max. pressure force 90kn Spindle inner diameter 96mm Lifting capacity 120kn Main hoist Max.single line lifting capacity 45kn Max.single line lifting speed 0-45m/s Wire rope caliber 17.5-18.5mm Hoist capacity of wire line 90-110m Roller diameter 140mm Wirerope diameter 6mm Wire rope length 450m Mud pump Type BW-250 Displacement 250 l/min Work pressure 80kg/cm² Water inlet pipe diameter 75 mm Water outlet pipe diameter 50 mm Power Diesel engine YC4E135-1 81KW Electric motor Y225S-4 37KW
Applications of HZ-200YY hydraulic core drilling rig HZ-200YY hydraulic core drilling rig is mainly used for geological general investigation and exploration, road and tall building foundation exploration, holes in concrete structure, river levees, civil water wells and ground temperature central air-conditioner. 2. Features of HZ-200YY hydraulic core drilling rig ·the highest speed can reach 1045r/min with 5 gears, which improves drilling efficiency ·adopted 53*59 drilling rod, which has high rigidity and strong delivery torque. ·equipped with taper clutch, made the machine easy to operate and free of maintenance. ·using large module planetary gear and adding supporting frame, which highly increased hoisting and braking ability of the winch. ·vertical spindle are fixed by four groups of bearings to ensure that the core drilling rig is rigid enough for gravel layer and other complex geological conditions. 3. Technical parameters of HZ-200YY hydraulic core drilling rig Max open hole diameter 300mm End hole diameter 75mm Drill rod diameter 60mm Drilling angle 90 Drill weight (without power) 975kg Triangle conveyer belt B950 * 4; B1700 * 3 Main drilling rig moving distance 300mm Power Diesel engine 22HP Electric motor 15kw Spindle Spindle speed 64/128/287/557r/min Spindle stroke 450mm Hoist Max. lifting capacity 2400kg Single line lifting speed 0.41/0.82/1.64 m/s Wire rope diameter 13mm Wire rope length 35m Reel diameter 140mm Hug floodgate diameter 260mm Hug floodgate belt width 70mm Mud pump Type Horizontal single-urn twin-action Displacement Diesel engine 170L/min Electric motor 150L/min Maximum pressure 3mpa Work pressure 1.5mpa Inlet pipe diameter 40mm Outlet pipe diameter 30mm Triangle conveyer belt B1728mm
Characteristics of XYD-44A crawler hydraulic core drilling rig XYD-44A crawler hydraulic core drilling rig is a multi-purpose spindle well drilling rig suitable for high-speed medium and deep borehole drilling in complex rock formation. HuaxiaMaster well drilling rigs covers all the main foundation and drilling technologies with a range of models whose characteristics, capability and performance find application in every operating condition. 2. Applications of XYD-44A crawler hydraulic core drilling rig ·Hydraulic core drilling rig , ·engineering well drilling , ·hydrology and water well drilling ·large diameter foundation piles construction 3. Parameters of XYD-44A crawler hydraulic core drilling rig XYD-44A crawler hydraulic core drilling rig Drilling depth 600-1400m Max open hole caliber 300mm End hole caliber 75mm Drilling rod diameter 60mm Drilling angle 90-65 Drill rig moving stroke 450mm Spindle Spindle speed ( Diesel Engine) Forward 60 97 169 187 276 301 284 487 521 847 1180 1490r/min Reverse 65 201r/min Spindle speed ( Electric Motor) Forward 50 81 141 155 230 251 320 406 434 706 984 1247r/min Reverse 54 167r/min Spindle stroke 600mm Spindle max. pressure force 90kn Spindle inner diameter 96mm Lifting capacity 120kn Main hoist Max.single line lifting capacity 45kn Max.single line lifting speed 0-45m/s Wire rope caliber 17.5-18.5mm Hoist capacity of wire line 90-110m Roller diameter 140mm Wirerope diameter 6mm Wire rope length 450m Mud pump Type BW-250 Displacement 250 l/min Work pressure 80kg/cm² Water inlet pipe diameter 75 mm Water outlet pipe diameter 50 mm Power Diesel engine YC4E135-1 81KW Electric motor Y225S-4  37KW
1. The brief introductions of 15 meters crawler rotary pile drilling rig with circular power rod With hydraulic crawler retractable chassis, self-lifting and falling foldable drill mast, Telescopic drill pipe, rotary pile drilling rig with circular power rod is a kind of construction machinery suitable for drilling in building foundation engineering. It is mainly suitable for the construction of sandy clay silty soil and other soil layers. It is widely used in the construction of cast-in-place piles continuous walls foundation reinforcement and so on. Compared with the ordinary rotary drilling rig,rotary pile drilling rig with circular power rod has many objective advantages, such as drilling the concrete ground, the hard sand soil layer, the rock layer and so on. It is suitable for large engineering construction, high speed rail and railway construction. The machine works with fast speed, high efficiency, good drilling quality, oil saving and durable. 2.The features of 15 meters crawler rotary pile drilling rig with circular power rod The folding mast structure is adopted. The structure is simple and exquisite, and its durability is good. The whole machine has good stability, cost saving and convenient maintenance. The upper guide structure ensures the perpendicularity of the drill pipe and the ground, so that the construction is more convenient, the construction efficiency is improved, and the safety is increased. The power head adopts the original patented structure, the design is more reasonable, the lubrication is reliable, the power is strong, the cost is economic, and it is not easy to damage, so it is easy to maintain. The main winch is equipped with imported hydraulic motor, which has a sensitive response and can be freely lowered when used. The lifting speed can reach up to 82m/min, which greatly improves the construction efficiency. The main winch is placed at the right front side of the operator, so that the operator can observe the working condition of the main winch at any time and avoid the phenomenon of disorder caused by other factors.
Description poultry house thermal oil heater products series Oil/gas heaters(Diesel or kerosene) 1. DH series(Output heat 23KW or 43KW) The burning heat was blowed out directly. Used in construction site or small industrial workshop, for temporary heating or drying. Can also be used in chicken brooding and pig conservation. DH25PV have a heat exch anger and a chimney, to exhaust tail gas. 2. Tornado series(Output heat 66KW or 115KW) This series have a special fan, can get oxygen from outside through vent and pipe. This can make burning more stable. 3. Mirage series(Output heat 36KW or 53KW or 84KW) This series have Oxygen fan can get oxygen from outside, and efficient heat exchanger, this can exhaust tail gas, making blow hot airs clean. Our special design is the air outlet have a baffle in no wind area, make outlet air strong, can blow further through the air-discharge pipe. 4. Helios series(Output heat 140KW/145KW/174KW/195KW) Helios using the isolated independent burner, burn oil or gas. Burning chamber is multipass exchange heat, the highest heat effiency, exhaust tail gas the same time. Our burner using the Riello(Italy brand) burner, more durable. Feature of the diesel fuel heater : 1. Robust and tough design 2. Function on diesel oil or kerosene 3. Stainless steel combustion chamber with fan cooling 4. Durable external powder coating 5. With flame sensor 6. If no oil , heater will cut off the power 7. Fixed Oil display 8. Cut-off protection,re-plugged in will not work automatically 9. Low pressure atomization,combustion completely 10. Waterproof class IPX4 11. With P.C.panel to smart setting temperature 12. Easy maintenance 13. Ideal for heating warehouses, factories and workshops
Bow Spring Centralizer Hinged non welded bow spring casing centralizer is a simple, low-cost bow-spring design which can provide complete centralization in vertical or slightly deviated wells as the bow springs are slightly larger than the wellbore. If you have any question on casing centralizer, composite centralizer, hinged welded centralizer, aluminum spiral vane solid rigid centralizer and bow spring centralizer etc. We will give the professional answers to you. 1.The non weld bow centralizers combine the highest restoring force with the lowest starting force. 2.High restoring force combined with low starting force is achieved with all bow heights. 3.The Bows of these Centralizers are heat treated in special furnace which gives it a peculiar â??bow springâ?? action. 4.The Heat Treated bows enables these centralizer to provide best centralization as well as help in faster running of casing. 5.The steel of these bows is a "special" made by combination or different metals to provide one of the best tensile strength as well as the "spring back" bow spring action. 6.The bows are available in a range to accommodate any well profile. 7.In this type of Centralizers the End Collars have hinges which makes it in two halves. 8.This enables them to be assembled at site. 9.The Hinged non welded bow spring centralizers are available in size 4-1/2" to 20". 10.Their installation on the casing pipe is very convenient.It requires only the placement of the two assembled halves on the pipe and inserting the pin in the end collar hinge. 11.The centralizer when unassembled makes a compact package, reducing the shipping cost. 12.Assembly at site is conveniently done.
REQUIRED HARDWARE WHAT IS TEMPORARY FENCING? Temporary fencing system is a combination of components, including fence panels, bases, clamps and other optional accessories, to be used in construction sites, events and private sites for protection and sectioning. Three temporary fencing are connected with clamps, orange plastic feet and bracings. ATF-01: Temporary fencing has firm and rigid structure for site security. WHY USE TEMPORARY FENCING? Quick and easy installation. Light-weight panels are composed of round pipe frames and welded infill meshes which are easily and quickly installed just only two person. No need to dig holes. Removable and lightweight plastic bases make the installation be more easier and will not break the ground surface at all. Fill the water or sands into the base to form a solid and strong base for whole protective system. Anti-corrosion and aging resistance. The hot dipped galvanised finish of infill mesh and frames make the temporary fencing panel excellent corrosion resistance performance. Besides, the anti-ultraviolet agent added plastic base can withstand the strong UV rays and aging resistance. Multiple panels options. Electrical temporary fencing and stable temporary fencing in different pipe sizes and wall thickness for your requirements Considerate options. Company logos, warning signs, shade clothes and special specifications can be customized to your needs. All required hardware included. Bases, clamps, braces, dog bars, shade clothes and other you wanted hardware can be supplied. Perfect for construction sites. It can be used for enclosing and warning dangerous sites and preventing unauthorized accesses. Easy installation and uninstallation performance is suitable for different construction period. OPTIONAL ACCESSORIES Shade cloth.Customized logos.Braces.Customized warning signs.Dog bars.Handrails.Razor wires.Barbed wires. TYPES OF TEMPORARY FENCING AU & NZ Temporary Fencing Econo Temporary Fencing Sturdy Temporary Fencing Custom Temporary Fencing CATALOG DOWNLOADS AU & NZ Temporary Fencing Catalog All Products Catalog
Product introduction: The oil mist filter for vacuum pump is my company independent research and development production of high efficiency filtration product, used for oil lubricated rotary vane vacuum pump exhaust the oil and gas separation device, installed in the vent pipe of the vacuum pump, in the process of vacuum pump operation, exhaust gas go through the filter, oil mist particles in liquid form cannot directly go through glass fiber filter paper, and then attached to the filter paper, clean gas is under certain pressure go through the glass fiber paper discharge smoothly, and to reduce pollution,ensure a clean environment. Data: Brand model size of interface sucking rate Nanfeng KF25 DN25 8L/S Product features: 1, Vacuum pump oil mist filter shell adopt imported high strength transparent material production, high temperature resistance, corrosion resistance, good appearance, and can directly observe the oil and gas separation condition; 2, Long service life, effectively filtering mechanical pump vent discharge of oil mist, filtration rate above 99%, can effectively reduce the air pollution, improve the working environment; 3, Filter material adopt imported glass fiber paper, stable performance and strong oil absorption; 4, The device is designed as a quick release v band clamp flange, quick installation and easily fitting with vacuum pumps exhaust pipe of different models and import brands . Replacement steps of exhaust filter: 1.After the vacuum pump stops, ensure that the system is under pressure. 2.Remove the quick release v band clamp flange on the filter. 3.Remove the oil mist filter and replace it with a new one. Note: when replacing the oil mist filter, it is better to replace the vacuum pump oil at the same time.
Product classification: Transformation of fermentation engineering Applications area: Beer Bars, Hotels, Restaurants etc. Product features: 1. Chemical energy is mainly generated by the added chemical reagents,is the most important factor for wash. ; 2.In the fermentation process, the dirt is generally combined with inorganic and organic matter, the structure is as follows: to inorganic as the skeleton, organic; CIP Cleaning System With the development of the video industry, CIP system has develop and improve. Initially cleaning on the tank, pipe and other equipment by the manual, time-consuming and ineffective. CIP system uses fluid circulation to clean tanks, piping and equipment, without disassembly to achieve the desired cleaning effect. CIP cleaning system to ensure a certain cleaning effect, improve product safety; save operating time, improve efficiency; save labor, protect the operation of security; save water, steam and other energy, reduce the amount of detergent; production equipment can be large-scale, High level; extend the service life of the production equipment. , CIP cleaning mechanism of action Chemical energy is mainly generated by the added chemical reagents,is the most important factor for wash. General manufacturers can choose detergent based on the nature and extent of pollution, constitute the material, water quality, selected cleaning methods,cost and safety aspects. Physical energy can be powered primarily by the washing pump, the cleaning solution is sprayed onto the inner surface of the tank and the cleaning fluid flows down the tank wall. In general, the effect of such a mechanical effect is very small, cleaning effect mainly by the chemical effect. ,¡ Characteristics of Dirt in Fermentation Engineering In the fermentation process, the dirt is generally combined with inorganic and organic matter, the structure is as follows: to inorganic as the skeleton, organic matter filled in them.
Size According to your required Price $120-$300 Per square meter Certificates ISO9001 Age range One to twelve years old Material A.Plastic B.Post:National standard galvanized steel pipe C.Metals:Galvanized D.PE netting, EVA floor carpet ( Different material is available at your demand) Payment T/T thirty percent deposit, the balance sent before shipment Components Plastic slide, tube galvanized pipe,soft toys,mat etc. Advantages A.European standards. B.Anti-UV,Anti-static,Anti-skid,Anti-crack C.Professional designer will design for you freely D.Security E.Environmental protection F.Color is not easy to fade Capacity Normally,two square meters space can accommodate a child. Installation Professional CAD instruction, assembly procedure and project case. Packing Packed with cotton and nylon Attentions A.please check the screws and other catchers of equipment regularly. B.Please use the equipment within the age range(one to twelve),children under 6 play with adult supervision. C.Blunt objects and acid corrosive liquor are forbidden. Remark We can design as per your requirement Kids Soft Indoor Playground Equipment Features: 1. Colorful, anti-skid, anti-UV, anti-static, anti-crack,non-fading, non-toxin high-strength, static electricity resistant, wear resistant, age resistant and crack resistant. 2. Combining European and American popular styles with the characteristics of the domestic market, it skillfully adds functional movements such as running, sneaking, creeping, climbing, sliding, turning and rolling into children' activities, which not only exercises their balance, independent coordination and creative ability, but also improves children' awareness of self-protection. 3. It is ideal for active areas (shopping malls, parks, residential area, supermarket, kindergarten, etc.). The recreational facilities are safe and durable in structure, ingenious in design and harmonious in color. Various plastic components are ingeniously combined, which can provide children with security, fun and a lively feeling.
Size: According to your required Price: $120-$300 Per square meter Certificates: ISO9001 Age range: One to twelve years old Material: A.Plastic B.Post:National standard galvanized steel pipe C.Metals:Galvanized D.PE netting, EVA floor carpet ( Different material is available at your demand) Payment: T/T thirty percent deposit, the balance sent before shipment Components: Plastic slide, tube galvanized pipe,soft toys,mat etc. Advantages: A.European standards. B.Anti-UV,Anti-static,Anti-skid,Anti-crack C.Professional designer will design for you freely D.Security E.Environmental protection F.Color is not easy to fade Capacity: Normally,two square meters space can accommodate a child. Installation: Professional CAD instruction, assembly procedure and project case. Packing: Packed with cotton and nylon Attentions: A.please check the screws and other catchers of equipment regularly. B.Please use the equipment within the age range(one to twelve),children under 6 play with adult supervision. C.Blunt objects and acid corrosive liquor are forbidden. Remark: We can design as per your requirement Kids Soft Indoor Playground Equipment Features: 1. Colorful, anti-skid, anti-UV, anti-static, anti-crack,non-fading, non-toxin high-strength, static electricity resistant, wear resistant, age resistant and crack resistant. 2. Combining European and American popular styles with the characteristics of the domestic market, it skillfully adds functional movements such as running, sneaking, creeping, climbing, sliding, turning and rolling into children' activities, which not only exercises their balance, independent coordination and creative ability, but also improves children' awareness of self-protection. 3. It is ideal for active areas (shopping malls, parks, residential area, supermarket, kindergarten, etc.). The recreational facilities are safe and durable in structure, ingenious in design and harmonious in color. Various plastic components are ingeniously combined, which can provide children with security, fun and a lively feeling.
Our company: Jiangxi Marvel Trade Co.,Ltd We are one of distributor for loctite products in china. Loctite products as: 1 loctite thread locker adhesive : loctite 222 242 243 262 263 270 271 277 272 290 50ml 250ml bottle 2 loctite pre locker: Dri-loc200 Dri-Loc204 Dri-Loc211 3 loctite 503 516 HV Vibra-Seal 513Dri-Seal 4 Loctite pipe thread sealant: loctite 545 554 567 569 565 577 542 55 50ml 250ml 5 loctite 324 326 330 319 6 loctite instant adhesive: loctite 401 403 406 414 415 460 480 495 496 454 20gm 500gm bottle 7 loctite flange sealant: loctite 510 515 518 50ml 300ml 8 loctite rtv silicone sealant: loctite 207 587 593 596 595 5985 5699 5910 5900 5920 300ml cartridge 9 loctite retaining compound: loctite 603 609 620 638 648 660 680 601 64150ml 250ml bottle 10 loctite 7452 7387 7649 770 755 7070 712 loctite 567 577 50ml tube, loctite pipe sealant 567 577, loctite PST thread sealant 567 577 250ml tube Product Tags: #loctite adhesive #loctite adhesive #loctite distributor For more detail information please contact us. We will try our best to find better solution for you... Yours faithfully Angela Liu General manager
We are one of distributor for loctite products in china. Loctite products as: 1 loctite thread locker adhesive : loctite 222 242 243 262 263 270 271 277 272 290 50ml 250ml bottle 2 loctite pre locker: dri-loc200 dri-loc204 dri-loc211 3 loctite 503 516 hv vibra-seal 513dri-seal 4 loctite pipe thread sealant: loctite 545 554 567 569 565 577 542 55 50ml 250ml 5 loctite 324 326 330 319 6 loctite instant adhesive: loctite 401 403 406 414 415 460 480 495 496 454 20gm 500gm bottle 7 loctite flange sealant: loctite 510 515 518 50ml 300ml 8 loctite rtv silicone sealant: loctite 207 587 593 596 595 5985 5699 5910 5900 5920 300ml cartridge 9 loctite retaining compound: loctite 603 609 620 638 648 660 680 601 64150ml 250ml bottle 10 loctite 7452 7387 7649 770 755 7070 712 Loctite 567 577 50ml tube, loctite pipe sealant 567 577, loctite pst thread sealant 567 577 250ml tube Product tags: #loctite adhesive #loctite adhesive #loctite distributor For more detail information please contact us. We will try our best to find better solution for you... Yours faithfully Angela liu General manager
Applicable fluid medium: water, air, oil, corrosive chemical liquid For example: piping systems for pure water and raw drinking water, drainage and sewage piping systems, salt water and sea water piping systems, Acid-base and chemical solution systems and other industries. Body material: UPVC Transmission mode: electric; 90 angular stroke rotary electric drive Actuator material: cast aluminum alloy/plastic shell Protection device: overheating protection Action time: 4-30 seconds Nominal pressure: 1.0Mpa Nominal diameter: DN15-200 Protection level: IP65 Fluid temperature: -15�°C - 60�°C (no freezing) Ambient temperature: -25�ºC-55�ºC Power consumption: 8VA-30VA Installation method: installation at any angle (horizontal installation is best for prolonging life) Power supply voltage: standard AC220V, optional DC24V, AC110V Voltage tolerance: ±10%, DC tolerance ±1% Connection method: internal thread, bonding (welding), flange, double union