Boric acid is used to make textile fiberglass for tire cord, toreinforce certain plastics and tapes, and for home curtains. It is alsoa fire retardant in cellulose insulation, a raw material for sodiumborohydride (a paper bleaching agent), and a raw material for boronfibers used for high-strength composites. It is also an environmentally friendly preservative for wood and a corrosion inhibitor. Boric Acid Granular Technical Grade WC Code: 02-011-002 Sales Specification H3BO3: 99.6% Min B2O3: 56.2% Min Cl: 0.04% Max SO4: 0.04% Max Fe203: 0.001% Max Packing 25 Kg bag, 42 bags per pallet
Sodium Tetraborate Decahydrate is more popularly known as Borax10 mol. It is often used as a buffering agent. Borax decahydrate is utilized as a cleaning agent, especially for laundry purposes. Researchers may employ borax for surface treatment purposes, such as cleaning, etching, or modifying the surface properties of materials. Borax decahydrate serves as a preservative and pH buffer. It helps extend the shelf life of certain products and maintains their desired pH levels. Borax 10 mol is the least concentrated sodium borate product, because it has the most bound water (10 molecules). It is found in detergents, and personal care products. It is used to make glass, ceramics, and insulation. It is a flux in metal recovery, wire drawing and refractories. It is also a corrosion inhibitor in automotive antifreeze, and a preservative in casein-based adhesives. Functions pH buffer Preservative Cleaning Agent Buffering Agent Sales Specifications Appearance: White, granular, crystalline solid Grades: Technical Standard Description: The surface of the crystal is usually chalk white as a result of partial loss of water of hydration. Decahydrate Borax (Na2B4O7*10H2O): 100%min. Anhydrous Borax (Na2B4O7): 52.8%min. Boric Oxide (B2O3): 36.5%min. Sodium Oxide (Na2O): 16.3%min. Water of Crystallization (H2O): 47.2%max. Chloride (Cl): 200ppm max. pH in Water at 20C(68F): Weight 0.1%: pH 9.24 Weight 0.5%: pH 9.23 Weight 1.0%: pH 9.23 Weight 2.0%: pH 9.24 Weight 3.0%: pH 9.27 Weight 4.78%(Saturation): pH 9.32 Physical And Chemical Properties Specific Gravity 25C: 1.73 Specific Heat 25C: 147 cal/deg-mol Heat of Solution (Absorbed) 18C: -2.589Kcal/g-mol or -102.59Btu Heat of Formation: -1503.0 Kcal/g-mol or -5964.7 Btu Packing 55.12 lb bag, 42 bags per pallet
Borax Anhydrous has a wide variety of uses. It is a component of many detergents, cosmetics, and enamel glazes. It is also used to make buffer solutions in biochemistry, as a fire retardant, as an anti-fungal compound for fiberglass, as a flux in metallurgy, neutron-capture shields for radioactive sources, texturing agent in cooking, and as a precursor for other boron compounds. Borax Anhydrous, is the most concentrated sodium borate product because it has no bound water. It is used to manufacture heat resistant glass, high-quality glass, refractories and enamel glazes requiring high color standards. Functions Chelating Agent Antibacterial Preservative Tackifier Additive Texture Modifier Sales Specifications Boric Oxide (B2O3): 68.5 % Min Equivalent Borax (Na2B4O7): 99.0 % Min Sodium Oxide (Na2O): 30.5 % Min Sulfate as SO4: 150 ppm Max Total Iron (Fe): 50 ppm U.S. Standard Sieve No.: 2 % max Packing 55.12 lb bag, 42 bags per pallet
Benzene sulfonyl chloride as Starting material for Violet 23 & cobaltphthalocyanine dye. It is also used in Intermediate for agrochemicals . Benzene Sulfonyl chloride is used in the manufacture of BenzeneSulfonamide, surface active agents, sulfa drugs, esters by dehydration for perfumery products, lubricating oil additives. Benzene Sulfonyl chloride is used in Promoter in low hysteresis processing of carbon black rubber mixes. Benzene Sulfonyl chloride is used in Improvements in the production of polymerization products using halogen compounds to increase the effectiveness of sulfonation during polymerization. It also is used as Catalyst in furan resins. Benzene Sulfonyl chloride is used as brightening additive for nickel electroplating. Sales Specifications Appearance: Transparent Liquid Concentration (GC)â?¥ 99.0 % Free Acid â?¤ 0.2 % Diphenyl Sulfone â?¤ 0.4 % Hue â?¤ 50 Packing 250 kg iron drum, 4 drums per pallet DOT Transportation UN Number: 2225 Proper Shipping Name: BenzeneSulfonyl Chloride Hazard Class: 8 Packing Group: III RQ
1-Bromopentane is a chemical reagent used in a multitude of organic syntheses. It is used iron-catalyzed alkylations of aromatic Grignard reagents via cross coupling. It is used in the synthesis of-diketo acids as reversible inhibitors of Hepatitis C virus NS5bRNA polymerase. Sales Specifications Appearance: Colorless to Light Yellow Clear Liquid Purity: â?¥99.0% Moisture: â?¤500 PPM Packing 551.15 LB Drum, 4 drums per pallet DOT Transportation UN Number: 1993 Proper Shipping Name: Flammable liquids, n.o.s. (1-Bromopentane) Hazard Class: 3 Packing Group: III
1-bromoheptane is an important precursor material and intermediate used in organic synthesis, pharmaceuticals and agrochemicals. Sales Specifications Appearance: Colorless Liquid Assay: 99.0% Min Water: 500 PPM Max pH: 6.0-8.0 Non-volatility: 500 PPM Max Packing 200 KGS Iron Drum DOT Transportation UN Number: UN 1993 Proper Shipping Name: Flammable Liquid, n.o.s (1-bromoheptane) Hazard Class: 3 Packing Group: III
Ascorbyl Palmitate commonly used in the food industry as a natural preservative for oils, vitamins and colors. It is used in baking as an antioxidant or preservant to improve product shelf life of fat-based systems, like frostings and fillings. It may also be used as a functional ingredient to enrich foods with vitamin C. Ascorbyl Palmitate also serves to regenerate Vitamin E creating a synergy of anti-oxidant activity. Used mainly in infant formula, vegetable oils, cosmetics, animal fats and pharmaceutical products. Sales Specifications Appearance: White or yellowish-white powder Assay: 98.0% 100.5% Identification: Meet the requirements Appearance of solution: Clear, not more intense than BY4 Specific Optical Rotation: Between +21 and +24 Loss on drying: 0.8% Max. Sulphate ash: 0.1% Max. Heavy metals: 10ppm. Max Residue on ignition: 0.1% Max. Organic Volatile impurities: Meet the requirements Lead: 1 ppm Max. Quality Standard: Meet the standard of BP 2004/NF23/FCCV. Packing 10 KG cardboard drum,
Ascorbic Acid USP/FCC is used in the Food and beverage industry as a preservative, antioxidant, and flavoring agent in various products such as fruit juices, soft drinks, and breakfast cereals. It is also used in Skincare and cosmetics as an active ingredient in anti-aging products and to brighten and even out skin tone. It is used in Water treatment as a reducing agent to remove chlorine and other chemicals from water. Ascorbic Acid can also be used in Photography: as a developing agent in film and photography. It is used in Horticulture as a plant growth enhancer and to protect plants from environmental stress. Ascorbic Acid is also used in cleaning products as a stain remover. It is also used to remove rust from metal surfaces. Sales Specifications Appearance: White crystalline powder Identification: Positive Clarity of Solution: Clear Color of Solution: BY7 Assay: 99.0 -100.0% Loss on Drying: 0.4% Residue on Ignition: 0.1% Sulfate Ash: 0.1% Specific Rotation: +20.5 ~ +21.5 pH(with 2% water solution): 2.4 - 2.8 pH(with 5% water solution): 2.1 -2.6 Melting Range: about 190C Heavy Metals: 3ppm Iron: 2ppm Copper: 5ppm Oxalic Acid: 0.2% Arsenic: 1ppm Lead: 2ppm Cadmium: 1ppm Mercury: 1ppm Organic Volatile Impurities: Meets the Requirements Related Substances: ImpurityC 0.15% ImpurityD 0.15% Any Other Unspecific Impurities Impurity 0.10% Total Impurity 0.2% Total Plate Count: 1,000cfu/g According to BP2010, E300, USP32, FCC7, EP7 Packing 55.12 LB per carton, 40 cartons per pallet
Applications Aromatic 100 is also used in industrial applications such as fuel additives, paints and coatings, industrial cleaning, mastics and sealants, and process fluids. Specifications Total Aromatics: 99% Min Benzene Clac.: 50 PPM Max Pseudocumene: 45.0% Max Hazardous Air Pollutants (HAPS): 3.5% Max Initial Boiling Point: 300F Min Dry Point: 355oF Max Flash TCC: 107oF Min Mixed Aniline Point: 57oF Max Kauri Butanol Solvency: 90 Min Density (@60oF): 0.870 -0.878 API Gravity: 29.5 - 31.3oAPI Color, Saybolt: 28 Min Total Sulfur: 5 g/kg Max Copper Corrosion Aromatics: Packing 410 LB drum
Ammonium Hydroxide has various application but its top uses are, as an ingredient in many cleaning products, as a precursor to alkylamines, it is also used as a refrigerant gas because it absorbs heat from its surroundings, it is uses in water and waste water treatment as a stabilizer, it is used in to make ammonium nitrate fertilizer. It is also used for furniture darkening and for treatment of straw for cattle. It is used in the manufacturing of papers, rubbers, ammonia soaps, detergents, pharmaceutical products, fireproofing woods, inks, ceramics, and ammonium compounds. It is also utilized in metal extraction and a neutralizing agent for acids. It is used in the textile industry and a mordant. It is used in cosmetic products to neutralize the acidity of the product. Sales Specifications Assay: 25.00 % Min Specific Gravity: NS (ppm) Carbonate: 0.002 % Max Chloride: 0.5 ppm Max Sulphate: 2 ppm Max Sulphide: 0.1 ppm Max Arsenic: 0.05 ppm Max Iron: 0.2 ppm Max Phosphate: 1 ppm Max Calcium: 4 ppm Max Copper: 0.1 ppm Max Lead: 0.4 ppm Max Magnesium: 4 ppm Max Potassium: NS (ppm) Sodium: NS (ppm) Zinc: Oxygen Absorbed: Passes Test Pyradine & Homologues: Passes Test Silicate (SiO2): 10 ppm Max Residue on Evaporation: NS (ppm) Total Dissolved Solids: NS (ppm) Chemical Oxygen Demands: NS (ppm) Packing 474 Lb. drum, 4 drums per pallet 1984.14 Lb. IBC tote DOT Transportation UN No.: 2672 Proper Shipping Name: Aqueous Ammonia (Ammonium Hydroxide) Hazard Class: 8 Packing Group: III RQ
Ammonium fluoride is used for etching and frosting of glass, preservation of food and in woods, in printing textile, and as mothproofing agent. It is used in chemical analysis and as an antiseptic in brewing beer. It has also been used in commercial uses like, building materials, printing and dying textiles and in semiconductors. It has also been used in site-limited use as a surface treatment (for metal and non-metal surfaces), and as an intermediate in manufacturing. Specifications Appearance: White Needle Crystal Purity: 96.0% Min (NH4)2SiF6: 0.6% Max SO4: 0.1% Max Ignition Residue: 0.2% Max Chloride: 0.05% Max Silicate: 0.2% Max Iron: 0.02% Max Heavy Metal (as Pb): 0.02% Max Packing 55.12 LB Bag, 28/29 bags per pallet DOT Transportation Shipping Name: Ammonium Fluoride Hazard Class: 6.1 UN Number: 2505 Packing Group: III
Sales Specifications Appearance: Crystal Color: White Assay: 97.5% Min Sulfate (SO4): 0.10% Max Lead (Pb): 0.01% Max Anti- Caking agent: 1.0 â?? 2.0% Iron (Fe): 0.05% Max Moisture (H2O): 0.2% Max Packing 286.60 LB Drum, 4 Drums per pallet DOT Transportation Shipping Name: Corrosive solid, acidic, inorganic, n.o.s.(ammonium fluoborate) UN Number: 3260 Packing Group: III Hazard Class: 8
Ammonium Chloride Coarse Mesh Untreated WC Code: 01-015-03 Sales Specifications Appearance: White to Slightly off White, Fine.to Coarse Crystalline Assay (% NH4CI): 99.0 pH (5%.Sol. @ 20�°C: 4.5 Min. â?? 6.0 Max. Moisture (% H2O): 0.5 Max. Lead (Pb, pprn): 4 Max. Identification A & B: Pass/Fail Packing 50 lb paper bag, 49 bags per pallet
Ammonium Chloride Feed Grade (Treated Material) WC Code: 01-015-01 Sales Specifications Assay ( NH4Cl): â?¥ 99.5 PCT Moisture: â?¤ 0.7 PCT Fe: â?¤ 0.001 PCT Heavy Metal (As Pb): â?¤ 0.0005 PCT Sulphate (As SO4): â?¤ 0.02 Residue on ignition: â?¤ 0.08 Ph Value: 4.0-5.8 Packing 50 lb paper bag, 44 bags per pallet or In 1000kg super sack.
Physical And Chemical Properties The pH of a 5% aqueous solution of Ammonium Bifluoride is 3.5. In aqueous solution it releases 0.35 pounds of hydrofluoric acid per pound of Ammonium Bifluoride. In strong acid solutions, Ammonium Bifluoride releases 0.70 pounds of hydrofluoric acid per pound. Since the product absorbs heat when aqueous solutions are prepared, it is often advisable to use warm water. Additional properties are listed below. Melting Point: 258 F (126 C) Boiling Point: 462 F (239 C) Specific Gravity: 1.5 Solubility in Water (25C): 41.5% by weight Sales Specification Content(NH4HF2): 98.0% min (NH4)2SiF6: 2.0% max Loss on drying: 1.0% max Residue on ignition: 0.2% max Sulfate (based on SO4): 0.1% max Packing 50 LB Bag, 44 bags per pallet DOT Transportation UN Number.: 1727 Proper Shipping Name: Ammonium Bifluoride, Solid Hazard Class: 8 Packing Group: II
Applications Ammonium Bicarbonate is used as a raising agent in flat baked goods such as cookies and crackers and other similar applications inthe food industry. Ammonium bicarbonate can also be used in the manufacturing of plastics and rubbers as a fire retardant. In the fertilizer industry, Ammonium Bicarbonate can be used as an inexpensive source of ammonia. Physical And Chemical Properties Physical State: White crystal with slight ammonia odor Melting Point: 107-108�°C (Decomposes 36-60 C) Specific Gravity: 1.59 Solubility in Water: 17.4% at 20 C PH: 7.8 NFPA Ratings: Health: 1; Flammability: 0; Reactivity:0 Stability: Stable under ordinary conditions Sales Specification NH4HCO3 (Purity): 99.20 % â?? 100.50 % Chloride (as Cl): 0.003 % Max Sulphate (compound of sulfur as SO4): 0.007 % Max Non-Volatile Substances: 0.05 % Max Arsenic (As): 0.0002 % Max Lead (as Pb): 0.0002 % Max Packing 55.12 lb bag 40 bags per pallet
Aluminum Sulfate Powder WCode: 01-012-02 Sales Specifications Appearance: White Purity: 99% Min Al203 amount: 17% Min Fe203 amount: 0.05% max Water insoluble substance: 0.2% max pH: 3.10 min Dimension: 0-2 mm Arenic (As): 14mg/kg Al Max Cadmium (Cd): 3mg/kg Al Max Chrome (Cr): 30mg/kg Al max Mercury (Mg): 4mg/kg Al max Nickel (Ni): 20mg/kg Al max Lead (Pb): 40mg/kg Al Max Antimony (Sb): 20mg/kg Al Max Selenium (Se): 20mg/kg Al Packing 50 lb bag, 44 bags per pallet 2204.60 lb super sack
Aluminum Sulfate Solution WC Code: 01-012-03 Specifications Total Al2O3 (%w/w) : 8.2-8.3 Total Al2(SO4)3 (%w/w) : 27.9% Free Acid (as H2SO4,%w/w) : 0.0 Free Alumina (%w/w) : None Fe2O3 (%w/w) :
CAS Number: 12042-91-0 Applications Aluminum Chlorohydrate (ACH) is used as a flocculant and used as a coagulant in water purification. It can also be used in the Paper industry as a Sizing agent (AKD) of the precipitation agent, Size adhesive, Anionic garbage removal agent, Retention aid agent and filter aid agent and as additive for controlling resin obstacles. Specifications Aluminum: 9.50Min â?? 10.0Max Specific Gravity: 1.240Min â?? 1.260Max Sulfates: Meets Specs Arsenic: Meets Specs Appearance: Meets Specs Odor: Meets Specs Packaging 2700 lbs/ tote
Aluminum Sulfate Granular WC Code: 01-012-01 Sales Specifications Appearance: White Purity: 99% Min Al203 amount: 17% Min Fe203 amount: 0.05% max Water insoluble substance: 0.2% max pH: 3.10 min Dimension: 1-6 mm Arenic (As): 14mg/kg Al Max Cadmium (Cd): 3mg/kg Al Max Chrome (Cr): 30mg/kg Al max Mercury (Mg): 4mg/kg Al max Nickel (Ni): 20mg/kg Al max Lead (Pb): 40mg/kg Al Max Antimony (Sb): 20mg/kg Al Max Selenium (Se): 20mg/kg Al Packing 50 lb bag, 44 bags per pallet 2204.60 lb super sack Aluminum Sulfate Powder WCode: 01-012-02 Sales Specifications Appearance: White Purity: 99% Min Al203 amount: 17% Min Fe203 amount: 0.05% max Water insoluble substance: 0.2% max pH: 3.10 min Dimension: 0-2 mm Arenic (As): 14mg/kg Al Max Cadmium (Cd): 3mg/kg Al Max Chrome (Cr): 30mg/kg Al max Mercury (Mg): 4mg/kg Al max Nickel (Ni): 20mg/kg Al max Lead (Pb): 40mg/kg Al Max Antimony (Sb): 20mg/kg Al Max Selenium (Se): 20mg/kg Al Packing 50 lb bag, 44 bags per pallet 2204.60 lb super sack
