Application : Solar cables are intented for use in photovoltaic power supply systems and similar applications as free hanging, movable, fixed installation and buried in ground in constructional covered systems. The cables can be used indoor, outdoor, in hazard explosion areas, in industry and agriculture. They are suitable for applications in equipment with protective insulation (protecting Class 2). Standards : Adapted to PV systems, 2 Pfg 1169 / 08.2007 and EN 50618:2015. Voltage Rating : AC 0.6 / 1.0 kV Max. PV - System Voltage : DC up to 2.0 kV possible Max. Permissible Operating Voltage in AC Systems : 0.7 / 1.2 kV Max. Permissible Operating Voltage in DC Systems : 0.9 / 1.8 kV Test Voltage : AC 6 kV / DC 10 kV (15 min.) Construction : Conductor : Fine Wire Tinned Copper Conductor according to BS EN 60228:2005 cl. 5. Insulation : UV resistant, cross linkable, halogen free, flame retardant compound for core insulation. Core Identification : Red, black or natural Sheath : UV resistant, cross linkable, halogen free, flame retardant compound for Sheath over insulation.
Product Name: Guarana Powder Product Code: WH3001 Description: Product obtained by hydroalcoholic extraction of the Paullinia cupana (sapindaceae) seeds, and then spray dried. due to its energetic properties make it suitable for use in various applications in the food industry. Common Uses and Orientative Dosage: Food supplement 300.00 g/100kg SENSORY SPECIFICATION Aspect Fine powder Color Brown Odor Characteristic Taste Characteristic PHYSICAL & CHEMICAL SPECIFICATION ID Test Positive Caffeine Min. 22.00 g/100g Specific Gravity at 25°C 0.30 g/mL - 0.60 g/mL Moisture Max. 5.00 g/100g pH 4.20 - 5.20 CONTAMINANTS SPECIFICATION Heavy Metals Max. 10 ppm MICROBIOLOGICAL SPECIFICATION Aerobic Plate Count Max. 1000 CFU/g Escherichia Coli Negative/g Yeasts and Molds Max. 100 CFU/g Salmonella Negative/25g Staphylococcus Aureus Negative/g Total Coliform Max. 10 MPN/g Packaging: Cardboard box with plastic bag. Shelf Life: 24 months from the date of manufacture if following storage conditions. Storage conditions: Store in sealed original packaging, in a dry and ventilated place, protected from sunlight. Hygroscopic product.
Product Name: Acerola Powder Product Code: WH2001 Description: Product obtained from selected fruit (Malpighia emarginata )which juice is dehydrated by atomization (spray dryer). Common Uses and Orientative Dosage: Powder/solid mix for drinks 230.00 g/100kg SENSORY SPECIFICATION Aspect Fine powder Color Ivory Odor Characteristic Taste Characteristic PHYSICAL & CHEMICAL SPECIFICATION Loss on drying at 105 °C Max. 5.00 g/100g Ascorbic Acid Min. 17% Specific Gravity at 25°C 0.40 g/mL - 0.80 g/mL Total Ash Max. 5.00 g/100g Moisture Max. 6.00 g/100g pH 2,80 - 4,20 CONTAMINANTS SPECIFICATION Heavy Metals Max. 10 ppm MICROBIOLOGICAL SPECIFICATION Aerobic Plate Count Max. 1000 CFU/g Escherichia Coli Negative Yeasts and Molds Max. 100 CFU/g Salmonella Negative Total Coliform Max. 10 MPN/g Packaging: Cardboard box with plastic bag. Shelf Life: 24 months from the date of manufacture if following storage conditions. Storage conditions: Store in sealed original packaging, in a dry and ventilated place, protected from sunlight. Hygroscopic product.
Product Name: Glycerine Chemical Formula: C3H8O3 CAS Number: 56-81-5 Description: Glycerine, also known as glycerol, is a simple polyol compound widely used in various industries due to its versatile properties. It is a colorless, odorless, and viscous liquid with a sweet taste. Glycerine is hygroscopic, meaning it readily absorbs water from the air, and is miscible with water and alcohol, making it an excellent solvent and humectant. It is derived from both natural sources, such as vegetable oils, and synthetic processes. Appearance: Glycerine typically appears as a clear, colorless, and viscous liquid. Key Features: Humectant: Retains moisture, making it ideal for use in skincare and personal care products. Solvent: Excellent solubility in water and alcohol, making it a good solvent for various applications. Sweetener: Used as a sweetening agent in food and beverages. Lubricant: Provides lubrication in pharmaceutical and cosmetic formulations. Non-Toxic and Biodegradable: Safe for use in food, pharmaceuticals, and personal care products, and environmentally friendly. Applications: Personal Care Products: Skin Creams and Lotions Toothpastes Shampoos and Conditioners Soaps and Body Washes Food and Beverage Industry: Sweeteners in Food Products Preservatives Humectants in Baked Goods Pharmaceutical Industry: Excipients in Medicines Cough Syrups Suppositories Industrial Applications: Antifreeze and Coolants Lubricants Plasticizers Technical Specifications: Purity: 99.5% min Moisture Content: 0.5% max Specific Gravity (25°C): 1.26 - 1.30 pH: 5.5 - 8.0 Heavy Metals: â?¤ 5 ppm Chlorides: â?¤ 10 ppm Packaging: Glycerine is available in various packaging options to suit customer needs: 250 kg HDPE Drums 1250 kg IBC Tanks Bulk Tanker Loads Storage and Handling: Store in a cool, dry place away from direct sunlight. Ensure containers are tightly closed when not in use. Use appropriate personal protective equipment (PPE) during handling to avoid skin and eye contact. Safety and Regulatory Information: Regulatory Compliance: Complies with USP, EP, BP, and other relevant international standards. Safety Data Sheet (SDS): Available on request, providing detailed information on safety, handling, and emergency measures.
Chitosan is a biopolymer derived from chitin, which is found in the exoskeletons of crustaceans like shrimps and crabs. It is widely recognized for its biocompatibility, biodegradability, and non-toxicity, making it suitable for various applications. Applications: 1. Biomedical: Chitosan is used in various biomedical applications, including wound dressings, scaffolds for tissue regeneration, drug delivery systems, and dental materials. 2. Nutraceuticals: Chitosan is sometimes used in dietary supplements for its purported cholesterol-lowering and weight loss properties, although scientific evidence supporting these claims is limited. 3. Agrochemicals: Chitosan-based formulations are used in agriculture as biopesticides, plant growth promoters, and soil amendments due to their biocompatibility and biodegradability. 4. Food and Beverage: Chitosan is employed in the food industry as a natural preservative and clarifying agent, as well as in wine and beer production to remove impurities. 5. Cosmetics: Chitosan is utilized in cosmetic formulations for its moisturizing, film-forming, and texturizing properties, appearing in products such as creams, lotions, and hair care products. Specifications- Ash: Less than 1% Moisture: Less than 15% pH: Between 6-8 Degree of deacetylation: More than 75% Viscosity (1% soln. in 1% acetic acid): More than 100cps Heavy Metal (pb): Less than 10 ppm Heavy Metal (As): Less than 1 ppm Total Plate Count: Less than 3000 cfu/g E Coli: Negative
Reliable Supplier of EN590 and Jet Fuel A1 Rotterdam/Fujairah Howe Invest, a trusted intermediary service based in Western Australia, is pleased to offer high-quality petroleum products from reliable suppliers. We supply EN590 (Diesel) and Jet Fuel A1 with flexible and competitive terms. **Products Available:** - **EN590 (Diesel 10 PPM)** - Monthly Supply: 100,000 MT - 500,000 MT - **Jet Fuel A1** - Monthly Supply: 1,000,000 bbls - 5,000,000 bbls **Contract Duration:** - Available for 12, 24, and 36-month contracts **Delivery Options:** - FOB (Free On Board) - CIF (Cost, Insurance, and Freight) - TTT (Tank-to-Tank) - TTV (Tank-to-Vessel) - STS (Ship-to-Ship) **Payment Terms:** - LC (Letter of Credit) - SBLC (Standby Letter of Credit) - BG (Bank Guarantee) - T/T (Telegraphic Transfer) against shipping documents **Why Choose Howe Invest:** - Proven track record of connecting buyers with high-quality suppliers. - Flexible contract terms to suit your needs. - Reliable logistics and supply chain management. **Contact Us:** For inquiries and further details, please contact us at: Partner with Howe Invest for your petroleum product needs and experience unparalleled service and reliability.
100,000 metric tons of EN590 10 PPM material at the Port of Rotterdam price is $735 per ton. The transaction will be subject to the following procedures: Procedures (tank to tank) FOB Rotterdam standard procedures: 1. Buyer issues ICPO, (TSA), financial capacity, 2. Bank details, scanned copy of buyer's passport along with CP and Reg. certificate. 3. The seller issues a commercial invoice signed by the seller and buyer. 4. The Seller issues to the Buyer a Dipping Test Authorization (DTA) document which must be signed by the Buyer, the Seller and the Buyer's logistics company as verification. 5. Seller issues the PPOP listed below to Buyer: â?? TSR with GPS coordinates of tank location. â?? Injection report. â?? Certificate of origin. â?? Permit to sell. â?? SGS report. â?? Product passport (laboratory analysis report). 6. Buyer conducts dip test and sends TSR to seller. 7. After successful dipping test in sellers' tanks, the product will be immediately injected into buyer's tanks. Buyer pays for the product via MT103/TT.
Standards - EN 1783:1997 Standards or BIS or any other Standards Size - 51x35x14 mm, 52x35x14, 53x35x12 mm GSM of Outer Box - 280 GSM, 290 GSM, 300 GSM, 320 GSM GSM of Inner Box - 270 GSM Splints - Russian Splints, Popular Splints or Indian Matti Splints Splints Dimension - 42x2x2 mm No of Match Sticks in each box- 40 or 45 Match Head Colour - Brown or Green or Red or Blue 10�¢ Packing - Printed Paper or BOPP Film or Cellophane Paper 100�¢ Packing - Shrink Packing or Polybag 1000�¢ Packing - Corrugated Fibre Containers in 3 Ply or 5 Ply Bar Code Label - 10s Packing or 100s Packing as intended by buyers Filling of Sticks - Online Machines Direction of Match Heads - All appear in one direction
The Manufacturers and Suppliers of the exceptionally duplex steel flanges made their things for the client in different shapes and sizes as per the client's interest. Profound Steel Community is the producer, stockist, and supplier of the entire thing, including this. They supply, generally speaking, and convey the thing by staying aware of the stunning quality and cost as well. According to their properties and components, Extremely Duplex Steel Flanges are considered the best in the series of steel flanges. A few things like copper, zinc, and chromium are open in the Extremely Decision, which makes it austenitic solidified steel. An enormous piece of the undertaking uses phenomenally strong Duplex steel since when these parts come in contact, they produce high strength. Specification of Super Duplex Stainless Steel S32750/S32760 Flanges Super Duplex Stainless Steel Flanges Specification : ASTM A182 / ASME SA182 Dimension Standard : ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. Standard : ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc. Size : 1/2" (15 NB) to 48" (1200NB) Class / Pressure : 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc. Flange Face Type : Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ) DIN Flanges : DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673. JIS Flanges : JIS B2220 5K, JIS B2220 10K, JIS B2220 16K, JIS B2220 20K BS Flanges : BS4504 PN 6, BS 4504 PN 10, BS4504 PN 16, BS4504 PN 25, BS4504 PN 40, BS 4504 PN 64, BS 4504 PN 100, BS 4504 PN 160, BS 4504 PN 250, BS 10, BS Table D, BS Table E, BS Table F, BS Table H.
We have the ja1 & en59010ppm product available in Rotterdam. Our company regulates oil contracts between the seller and the buyer well and reserves all the rights of the intermediaries and both parties (the seller and the buyer). We have most petroleum products available (en59010ppm & ja1) for those interested in the subject and serious buyers only, we offer our services. 100,000 metric tons of EN590 10 PPM material at the Rotterdam Port. price $735 per ton. $10 for brokers ($5 from seller side $5 from buyer side) 2,000,000 barrel JA1 Fuel at the Rotterdam Port price 92$ per barrel . $10 for brokers ($1 from the seller's side and $1 from the buyer's side). The deal will be subject to the following procedures: PROCEDURES (Tank to Tank ) JA1& EN590 10PPM. 1. Buyer issue ICPO, (TSA), Financial Capability, 2. Banking details, scanned copy of buyer's passport along with CP and Reg. Certificate. 3. Seller issues commercial invoice to be signed by Buyer and Seller. 4. Seller issue to Buyer the Dip Test Authorization document (DTA) which is to be signed by the Buyer, Seller, and Buyerâ??s logistic company as verification. 5. Seller issues the PPOP listed below to the Buyer: TSR with GPS coordinates of the Tank Location. Injection report. Certificate of Origin. Authorization to sell. SGS report. Product Passport (Lab Analysis Report). 6. Buyer Conducts Dip Test and sends TSR to Seller. 7. Upon successful Dip Test in Sellers Tanks, product will immediately be injected into Buyer's Tanks. Buyer makes payment for the product via MT103/TT." If these procedures and price suit the buyer's requirements, you can contact us.
Product Name: Acai Powder Product Code: WH1001 Description: The acai berry is the fruit of the acai palm (Euterpe oleracea), native to the amazon, and has been consumed for centuries in popular recipes in the north of Brazil. This super fruit of purple color and remarkable flavor is rich in anthocyanins(a natural constituent with antioxidant activity), amino acids, essential fatty acids, fibers, proteins, and minerals (mainly calcium and potassium). This dehydrated ingredient is obtained from selected acai juice, and dried by atomization(Spray Dryer). Common Uses and Orientative Dosage: Food supplement 500.00 g/100kg SENSORY SPECIFICATION Aspect Fine powder Color Bordeaux Odor Characteristic Taste Characteristic PHYSICAL & CHEMICAL SPECIFICATION ID Test Positive Moisture Max. 5.00 g/100g Specific Gravity at 25°C 0.40 g/mL - 0.80 g/mL Particle Size 0.42mm(40 mesh) Max. 5.00 g/100g Total Polyphenols Min. 0.30 g/100g CONTAMINANTS SPECIFICATION Heavy Metals Max. 10 ppm MICROBIOLOGICAL SPECIFICATION Aerobic Plate Count Negative/g Escherichia Coli Negative/25g Yeasts and Molds Max. 1.000.000 UFC/g Salmonella Negative/g Total Coliform Max. 10 MPN/g Packaging: Cardboard box with plastic bag. Shelf Life: 24 months from the date of manufacture if following storage conditions. Storage conditions: Store in sealed original packaging, in a dry and ventilated place, protected from sunlight. Hygroscopic product.
Olympus Nortec 600D is a compact, durable, high-performance digital circuitry and eddy current flaw detector. Designed to generate highly visible and contrasting eddy current signals in all kinds of lighting conditions displayed on a vivid 5.7-inch VGA screen. The NORTEC 600 flaw detectorâ??s redesigned interface takes the intuitive, knob-operated navigation of its predecessors and merges it with the efficient direct-access keys and simple menu structure of other popular Olympus instruments. Olympus converges its latest advancements in high-performance digital circuitry and eddy current flaw detection into one compact and durable portable unit the new NORTEC 600. With its crisp and vivid 5.7 inch VGA display and true full-screen mode, the NORTEC 600 is capable of producing highly visible and contrasting eddy current signals in any lighting condition. The redesigned interface of the NORTEC 600 borrows the intuitive, knob-operated navigation of its NORTEC predecessors and combines it with the simple menu structure and highly efficient direct-access keys of other popular Olympus instruments. Available in four versatile models, the NORTEC 600 offers a wide range of innovative functionalities, including an Application Selection menu, an all-in-one display, real-time readings, and signal calibration in Freeze mode, ensuring that inspections are quick and easy for any level of operator. Key Features: Designed to meet the requirements of IP66. EN-15548 compliant. Long battery life (up to 10 hours). Bright, 5.7 inch (14,5 cm) VGA display. Full-screen option in any display mode. Improved filters for rotary scanner mode. Intuitive interface with Application Selection presets. All-settings configuration page. 10 Hz to 12 MHz frequency capacity. Automatic internal balancing (BNC connector). Up to two real-time readings. True automatic mixing. Storage capacity of up to 500 files (program and data). On-board file preview.
Product Specification INNER TUBE: oil resistant synthetic nitrile rubber REINFORCEMENT:single layer of fibre braided COVER:oil and weather resistant synthetic rubber APPLICATION:petroleum base and water base hydraulic fluids TEMPERATURE RANGE:-40â?? (-104 â?? ) to +100â??(+212 â??) Item Code Metric Size Inch Size SAE Dash size I.D O.D Max W.P Min B.P Min B.R W.T Standard(mm) Standard(mm) mm Inches Dash Min Max Min Max Mpa Psi Mpa mm Kg/m R6-05 5 3/16 03 4.2 5.4 10.3 11.9 3.5 510 14 50 0.12 R6-06 6.3 1/4 04 5.6 7.2 11.9 13.5 2.8 410 11.2 65 0.15 R6-08 8 5/16 05 7.2 8.8 13.5 15.1 2.8 410 11.2 75 0.18 R6-10 10 3/8 06 8.7 10.3 15.1 16.7 2.8 410 11.2 75 0.21 R6-12 12.5 1/2 08 11.9 13.5 19.0 20.6 2.8 410 11.2 100 0.27 R6-16 16 5/8 10 15.1 16.7 22.2 23.8 2.4 350 9.6 9.6 0.32 R6-19 19 3/4 12 18.3 19.9 25.4 27.8 2.1 300 8.4 8.4 0.42 SAE100 R3/EN 854 R3 INNER TUBE:oil resistant synthetic nitrile rubber REINFORCEMENT:two layers of high strength fiber braided COVER:oil and weather resistant synthetic rubber APPLICATION:petroleum base and water base hydraulic fluids SURFACE:wrapped surface,smooth surface TEMPERATURE RANGE:-40â??(-104â??) to +100â??(+212â??) Item Code Metric Size Inch Size SAE Dash size I.D O.D Max W.P Min B.P Min B.R W.T Standard(mm) Standard(mm) mm Inches Dash Min Max Min Max Mpa Psi Mpa mm Kg/m R3-05 5 3/16 03 4.5 5.4 11.9 13.5 10.5 1520 42 75 0.16 R3-06 6.3 1/4 04 6.1 7 13.5 15.1 8.7 1260 34.8 75 0.19 R3-08 8 5/16 05 7.6 8.5 16.7 18.3 8.4 1220 33.6 100 0.25 R3-10 10 3/8 06 9.2 10.1 18.3 19.8 7.8 1130 31.2 100 0.29 R3-12 12.5 1/2 08 12.4 13.5 23 24.6 7 1020 28 125 0.41 R3-16 16 5/8 10 15.6 16.7 26.2 27.8 6.1 880 24.4 140 0.49 R3-19 19 3/4 12 18.7 19.8 31 32.5 5.2 750 20.8 150 0.66 R3-25 25 1 16 25.1 26.2 36.9 39.3 3.9 570 15.6 205 0.81 R3-32 31.8 1-1/4 20 31.4 32.9 42.9 46 2.6 380 10.4 250 0.97 Surface OPTION 1: WRAPPED COVER OPTION 2: SMOOTH COVER PACKING By transparent plastic film, woven belt, wooden box fumigation or your request
Products Characteristics: 3D Hollow Structure: Lightness,dimensional-stable, provide unprecedented creative space for designers in the next 10 years. Smooth Surface: The equally stress distribution, suitable hardness. Excellent Air-tightness: It can guarantee the normal use of more than 6 months after inflated one time under the worst beaches exposure environment. Isolation Ability: It can easily achieve isolation, soundproof and other functions. Safety: High tension strength,High tear strength,High stiffness give high compressive strength and durability, Durable that cloud folding resistance more than 10000 times. Market Competitiveness: Cost-effective , Easy next procedure processing, Simple to use and easy to carry which suitable for all ages groups. Extra characteristics: REACh, EN-71, RoHS, CPSIA, ASTM D963,UV resistance,An ti-chemical, Anti-bacteria, Anti-Mildew,Flame retardant and etc. Application: Water Games and Sports Projects: Air SUP Board(Air Surfboard) Water Games and Sports Projects Water Platform/Running Belt Air Life Raft Air Boat Stop Cushion Waterplay and Sports Park Water Recreation/Sightseeing Pavilion Air V-Shape Boat Hull Sport Leisure Projects : Sports Fitness/Gymnastics Facilities(Air Gym Matã??Air Trackã??Air Floor) Outdoor Camping Mat Air Sofa Air Swimming/Baby Pool Yoga Mat Airbed Air Car Mat Safety Protection Facilities Fire Rescue/Escape Air-Cushion Impact Cushioning/Buffer Medical Mattress Flood Control Air Cushion Sound Isolating Wall Air Lifting Bags Others Air Tents Stent Portable Advertising Display Wall The Cow Mat
Product Description: Member Steel Column, Beam, Truss Type of Steel For Building Structure High-Strength Steel Carbon Structural Stee Q235 Connection Form Bolt Connection or welding Surface Treatment Painted or Galvanized Color Customized Main Structure Steel Beam, steel column Residential Wall Structure all Support Specification Customized Application Steel Workshop, Steel Structure Platform, Steel Fabricated House, Structural Roofing, Frame Part, Steel Walkway and Floor, Steel Structure Bridge; Cable-stayed bridges; Suspension bridges Production Capacity 30000 Metric Tons a Year Standard: ASTM, ANSI, GB, DIN, JIS, EN, ISO Design Parameter Wind Load, Snow Load and Earthquake Service life More than 50 years Transport Package Bulk Packed in Container Origin Xiamen, China Our core services â? One-stop service Provide one-stop full services from consulting, technical planning, drawing design, construction scheme determination, materials and accessories selection, assembly and engineering trial installation, warehousing and shipping, training and after-sales service, to provide customers with high value-added comprehensive solutions. â?¡Efficient communication Fluent English communication and timely responses from the marketing team with engineering backgrounds to bridge the communication gap and ensure accurate order details â?¢Quality pre-sales service In the field of construction technology, we have 5 registered architects, 5 registered civil structural engineers, 3 aluminum structural engineers; 10 registered construction engineers and 5 steel structure engineers; in the field of hardware and plastic production technology, we have 10 hardware structural engineers, 5 zinc aluminum alloy mold engineers, 5 plastic structural engineers and 5 IE structural engineers, to ensure we provide the best one-stop service. â?£Reliable after-sales service Before Topind products arrive at your site, we will submit assembly drawings of scheme and user manual to our customer, and provide detailed training and professional guidance to ensure that the project can be implemented successfully. We also can send our project engineers to site to provide professional assistance, training and inspection according to project needs.
Product Description: Member Steel Column, Beam, Truss Type of Steel For Building Structure High-Strength Steel Carbon Structural Steel Q235 Connection Form Bolt Connection or welding Surface Treatment Painted or Galvanized Color Customized Main Structure Steel Beam, steel column Residential Wall Structure all Support Specification Customized Application Steel Workshop, Steel Structure Platform, Steel Fabricated House, Structural Roofing, Frame Part, Steel Walkway and Floor, Steel Structure Bridge; Cable-stayed bridges; Suspension bridges Production Capacity 30000 Metric Tons a Year Standard: ASTM, ANSI, GB, DIN, JIS, EN, ISO Design Parameter Wind Load, Snow Load and Earthquake Service life More than 50 years Transport Package Bulk Packed in Container Origin Xiamen, China Our core services One-stop service Provide one-stop full services from consulting, technical planning, drawing design, construction scheme determination, materials and accessories selection, assembly and engineering trial installation, warehousing and shipping, training and after-sales service, to provide customers with high value-added comprehensive solutions. Efficient communication Fluent English communication and timely responses from the marketing team with engineering backgrounds to bridge the communication gap and ensure accurate order details Quality pre-sales service In the field of construction technology, we have 5 registered architects, 5 registered civil structural engineers, 3 aluminum structural engineers; 10 registered construction engineers and 5 steel structure engineers; in the field of hardware and plastic production technology, we have 10 hardware structural engineers, 5 zinc aluminum alloy mold engineers, 5 plastic structural engineers and 5 IE structural engineers, to ensure we provide the best one-stop service. â?£Reliable after-sales service Before Topind products arrive at your site, we will submit assembly drawings of scheme and user manual to our customer, and provide detailed training and professional guidance to ensure that the project can be implemented successfully. We also can send our project engineers to site to provide professional assistance, training and inspection according to project needs.
Product Description: Member Steel Column, Beam, Truss Type of Steel For Building Structure High-Strength Steel Carbon Structural Steel Q235 Connection Form Bolt Connection or welding Surface Treatment Painted or Galvanized Color Customized Main Structure Steel Beam, steel column Residential Wall Structure all Support Specification Customized Application Steel Workshop, Steel Structure Platform, Steel Fabricated House, Structural Roofing, Frame Part, Steel Walkway and Floor, Steel Structure Bridge; Cable-stayed bridges; Suspension bridges Production Capacity 30000 Metric Tons a Year Standard: ASTM, ANSI, GB, DIN, JIS, EN, ISO Design Paramete Wind Load, Snow Load and Earthquake Service life More than 50 years Transport Package Bulk Packed in Container Origin Xiamen, China Our core services One-stop service Provide one-stop full services from consulting, technical planning, drawing design, construction scheme determination, materials and accessories selection, assembly and engineering trial installation, warehousing and shipping, training and after-sales service, to provide customers with high value-added comprehensive solutions. â?¡Efficient communication Fluent English communication and timely responses from the marketing team with engineering backgrounds to bridge the communication gap and ensure accurate order details Quality pre-sales service In the field of construction technology, we have 5 registered architects, 5 registered civil structural engineers, 3 aluminum structural engineers; 10 registered construction engineers and 5 steel structure engineers; in the field of hardware and plastic production technology, we have 10 hardware structural engineers, 5 zinc aluminum alloy mold engineers, 5 plastic structural engineers and 5 IE structural engineers, to ensure we provide the best one-stop service. Reliable after-sales service Before Topind products arrive at your site, we will submit assembly drawings of scheme and user manual to our customer, and provide detailed training and professional guidance to ensure that the project can be implemented successfully. We also can send our project engineers to site to provide professional assistance, training and inspection according to project needs.
Member Steel Column, Beam, Truss Type of Steel For Building Structureï¼?High-Strength Steel Carbon Structural Steel Q235 Connection Form Bolt Connection or welding Surface Treatmentï¼?Painted or Galvanized Colorï¼? Customized Main Structureï¼?Steel Beam, steel column Residential Wall Structure all Support Specification Customized Application Steel Workshop, Steel Structure Platform, Steel Fabricated House, Structural Roofing, Frame Part, Steel Walkway and Floor, Steel Structure Bridge; Cable-stayed bridges; Suspension bridges Production Capacity 30000 Metric Tons a Year Standard: ASTM, ANSI, GB, DIN, JIS, EN, ISO Design Parameter Wind Load, Snow Load and Earthquake Service life More than 50 years Transport Package Bulk Packed in Container Origin Xiamen, China One-stop service Provide one-stop full services from consulting, technical planning, drawing design, construction scheme determination, materials and accessories selection, assembly and engineering trial installation, warehousing and shipping, training and after-sales service, to provide customers with high value-added comprehensive solutions. Efficient communication Fluent English communication and timely responses from the marketing team with engineering backgrounds to bridge the communication gap and ensure accurate order detailsQuality pre-sales service In the field of construction technology, we have 5 registered architects, 5 registered civil structural engineers, 3 aluminum structural engineers; 10 registered construction engineers and 5 steel structure engineers; in the field of hardware and plastic production technology, we have 10 hardware structural engineers, 5 zinc aluminum alloy mold engineers, 5 plastic structural engineers and 5 IE structural engineers, to ensure we provide the best one-stop service. Reliable after-sales service Before Topind products arrive at your site, we will submit assembly drawings of scheme and user manual to our customer, and provide detailed training and professional guidance to ensure that the project can be implemented successfully. We also can send our project engineers to site to provide professional assistance, training and inspection according to project needs.
Member Steel Column, Beam, Truss Type of Steel For Building Structure High-Strength Steel Carbon Structural Steel Q235 Connection Form Bolt Connection or welding Surface Treatment Painted or Galvanized Color Customized Main Structure Steel Beam, steel column Residential Wall Structure all Support Specification Customized Application Steel Workshop, Steel Structure Platform, Steel Fabricated House, Structural Roofing, Frame Part, Steel Walkway and Floor, Steel Structure Bridge; Cable-stayed bridges; Suspension bridges Production Capacity 30000 Metric Tons a Year Standard: ASTM, ANSI, GB, DIN, JIS, EN, ISO Design Parameter Wind Load, Snow Load and Earthquake Service life More than 50 years Transport Package Bulk Packed in Container Origin Xiamen, China Our service  One-stop service Provide one-stop full services from consulting, technical planning, drawing design, construction scheme determination, materials and accessories selection, assembly and engineering trial installation, warehousing and shipping, training and after-sales service, to provide customers with high value-added comprehensive solutions. Efficient communication Fluent English communication and timely responses from the marketing team with engineering backgrounds to bridge the communication gap and ensure accurate order details Quality pre-sales service In the field of construction technology, we have 5 registered architects, 5 registered civil structural engineers, 3 aluminum structural engineers; 10 registered construction engineers and 5 steel structure engineers; in the field of hardware and plastic production technology, we have 10 hardware structural engineers, 5 zinc aluminum alloy mold engineers, 5 plastic structural engineers and 5 IE structural engineers, to ensure we provide the best one-stop service. Reliable after-sales service Before Topind products arrive at your site, we will submit assembly drawings of scheme and user manual to our customer, and provide detailed training and professional guidance to ensure that the project can be implemented successfully. We also can send our project engineers to site to provide professional assistance, training and inspection according to project needs.
Diesel En 590..
