Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes colour, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. Rapid heating, constant to maintain the required drying temperature. The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
V Post Fence WIRE MESH FENCE Brands: HUAGUANG FENCE Certificate: BV,ISO-9000 Origin: CHINA SPECIFICATION V Post Fence High quality surfaces Our V post fence systems have the best stainless steel surface currently available on the market.Panels and posts are galvanized and optionally powder coated.Powder coating of galvanized surfaces gives the product the desired aesthetic quality and prevents the oxidation of zinc. Mounting method: The panels are mounted on post sides by means of special mounting clips that ensure an easy erection and setting adjustment. We ensure all necessary mounting accessories as well as a broad assortment of custom-made gates and wickets. V Post Fence Panels V post fence panels are made of vertical and horizontal 5mm or 4mm wires. Horizontal V profiles whose number depends on the height of the panel are an essential reinforcing element. The mesh has 50x200 mm straight apertures and 50x50 mm profiled apertures.The width of the panels is standard, 2,500 mm, and the height range is 630-2,430 mm.The size and layout of the apertures are designed to increase security by preventing intruders from scaling the fencing. Colors The panels are made of galvanised steel wires, unpainted or painted in a colour with the powder method. The fence posts are galvanised, then painted in a colour also with the powder method. Standard painting colour - green RAL 6005. Other colours available at the customer's request. Galvanized Our panel fencing has standard galvanized anti-corrosion. In galvanization process a layer of zinc is formed on the surface of steel. This coating protects steel against atmospheric corrosion. Galvanized and powder coating Galvanized panel fencing systems may be optionally powder coated in a colour of your choice. Powder coating enhances the anti-corrosion by preventing the oxidation of zinc, owing to which our fencing systems preserve their aesthetic qualities for even longer. V Post Fence Benefits · high strength and durability · desired aesthetic qualities · effective anti-corrosion in two varieties · aesthetic finish · speedy and easy installation · good value for money · wide range of available standard height and colour · varieties · matching optional equipment V Post Fence Universal Quality and aesthetic advantages of our V post fence systems make them ideal solutions for both corporate and private premises.Profiled lattice panels are ideal for: · factories · warehouses · retail facilities · public buildings · detached private premises · gated communities · sport facilities · parks Min order: 100PCS Payment terms: 30%TT as prepaid, then pay the balance at sight of copy of BL. Supply ability: 400TON/MONTH Delivery time: 30 Packages: Pallet
Highway bridge hanging basket form traveller Form Traveler is used Balance Cantilever Construction Method. Highway bridge hanging basket form traveller is easier to be use compare to Under Slung Model. And it is easier to be modified for future usage. Our Highway bridge hanging basket form traveller are with good quality modular connection, designed for future modification and repeated usage for many years. We supply good quality metal formwork. We also provide plywood formwork system as it is a more economical solution. Concreting Support, self-launching operation, level adjustments are all by means of hydraulic system. Erection of the Highway bridge hanging basket form traveller on the pier top can be as short as 1 week. All major parts join together by pin connection, which promises speedy erection and high accuracy design. Our Company Henan Shenghua Heavy Crane Group is a big enterprise specialized in researching, developing, producing and exporting. It mainly produces overhead crane and gantry crane, beam launcher, movable scaffolding system crane, Highway bridge hanging basket form traveller, straddle carrier, tyre transportor, beam trolley, portal crane and electric winch, electric hoist and all kinds of accessories, which widly cover machinery, metallurgy, electric power, railway, water conservancy, ports, terminals and other industries. Shenghua Heavy Crane Group have more than 600 staff, and covers 200,000 square meters. Our advantages: A. More than 50 R&D personnel with advanced Science and technology. B. More than 400 sets advanced Production processing equipment and inspection equipment. C. Independent intellectual property rights to develop energy saving bridge cranes, gantry cranes, and electric hoist. D. Obtain ISO 9001 certificate and more than 10 series of patent certificates. E. Efficient service and competitive products. F. Export more than 100 countries. Packing & Delivery Packing 1. Hydraulic parts are packed by high quality plywood crate to reduce distortion. 2. Structure are packed by plastic woven cloth to reduce abrasion during transporting. Delivery 1. If the size of Highway bridge hanging basket form traveller are suitable for container ship, usually by container. 2. If the size is too big, usually by bulk ship or by container after disassembly. 3. Transport ways are based on reducing cost and keep the Highway bridge hanging basket form traveller performance. Delivery time Could be delivered within 30 to 40 days after the receipt of deposit. Transportation Generally 35 days to 50 days to destination port.
Product Introduction The whole machine with delivery, into Material, pressure plate, broken one linkage control. In addition can be customized according to customer requirements of various types of wood processing equipment. Synthetic crusher crushed product size similar to the matchbox, but also can adjust the size of the material according to the size of the material, but because of raw materials, are used thickened screen, so the size of the finished product is generally 2-8 cm, belonging to broken wood equipment.  Raw material Comprehensive crusher is a professional crusher used to crush the waste template on the site, bamboo plywood, wood-based panels, plywood and other wood crushing equipment, Machinable width of 1.5 meters, the thickness of 1-30 cm of wood and other scraps. Working principle Comprehensive crusher structure is more complex, the use of hammer broken principle, in front of conveyor belt feeding, feeding port feeder, which has the first crushing system, except the nail system, the second crushing system, exhaust dust system , From the feed to the discharge of the size of the motor in this process a total of seven, belonging to the automatic with a nail removal system crusher. Structural 1, Feed delivery: to be placed plate to be broken wood; 2, Feed roller: feed speed control and keep the plate does not slip and no feed situation; 3, Spiral crusher roll: evenly distributed in the circumferential direction of the roller welding cutter, crushing roller to ensure that the moment in the circumferential direction of the same force; 4, The template is broken with the feed and broken synchronization, to achieve uniform crushing; 5, The feed roller adopts UCK series bearing plus spring compression mechanism, which can be adapted to the different thickness of the plate; 6, feed roller and crushing roller using different power system, easy to control  resistance to wear,one welding time can work continuously for more than 30 hours. Advantage 1, engaging blade, the material completely broken; 2, the choice of special blades, blade hardness is high; 3, strong structure, dense reinforcement plate to ensure the strong box; 4, automatic button control, safe and convenient; 5, safety signs and safety labels to ensure the safety of use;
Quick Details Classification: Organic Fertilizer Type: Seaweed CAS No.: 84775-78-0 Other Names: Kinghami Root Fertilizer MF: (C12H16O12)n EINECS No.: 232-680-1 Place of Origin: Shandong, China (Mainland) Release Type: Quick State: Liquid Purity: 100% Brand Name: KINGHAMI Model Number: Kinghami foliar fertilizer Application: Improve quality and yield Delivery: 7-15 days PH: 8-10 Packaging & Delivery Packaging Details1L*12bottle/case; 5L*4bottle/case; 200L/drum; 12~16mt/20FCL. Kinghami foliar fertilizer Delivery Time within 10 days Main Ingredient: Alginateâ?¥60g/L Nâ?¥95g/L P2O515g/L K2O60g/L B12g/L Organic Matter135g/L I: 600PPM PH 8-10 Our Kingmami seaweed fertilizer is made from Kelp seaweed. Kelp seaweed is a kind of delicious sea food for Chinese, Korean and Japanese. Besides alginate acid, it contains luxuriant mannitol, iodine, gibberellin, CTK, indoleacetic acid and many necessary microelement for crops, for example, Fe, Mg, Mn, Zn, etc. In fact, Kelp seaweed is the best and most expensive raw material of seaweed fertilizer. We produce seaweed fertilizer by biodegradation technology. We have gained IMO organic certificate, ISO: 9001 ISO:14001 certificate and other certificates used for production, environment protection and export. We do not add any chemical products or damage the active constituent of seaweed during the process and remain all the nutrients of Kelp seaweed. We do not extract any element, so all the nutrients of seaweed can be used in fertilizing the crops. We specialize in fertilizer production for over 10 years and continue our ideas in the future, this is the biggest advantage upon other seaweed fertilizer manufacturer from China. 1.Promote the flowers and fruits setting rate, fruit expansion, color up, good taste, precocity, an increase of storage time and endure to delivery, increase output by 10%-15%. 2.Enhance crops' resistance ability, resilience, speed up yellow leaf to turn green, lobules become larger, prevent the drop of stems leaves, flowers, fruits, have the efficacy of preventing dying sprout and rotting root. 3.Adjust soil harden, enhance the vitality of crops and protect the nutrient balance and healthy growth o crops. Applying Crops: Vegetables, fruits trees, tomato, cucumber, flowers, tea and so on. Spraying: Dilute it 1:300 to 1:600 and spray on the leaves Seedling Stage: Dilute it 1:800-1500, Fast Growing Stage: Dilute 1:800, Fruit Stage: Dilute 1:600
CMC (Sodium Carboxymethyl Cellulose), when D.S is 1:00, its molecular formula is [C6H7O2(OH)2OCH2COONa]n, CMC is odorless, tasteless, non-toxic white or micro-yellow powder or granule which is made from natural cotton fibers or wood pulp, it can briefly be described as an anionic water-soluble polymer. Act as thickener, stablise emulsions, rheology modifier, water retention aid, filtration reducer, binder, dispersant, protective colloid, floating aid, etc, it can be widely used in Ceramic, Building, Oil Drilling, Detergent, Food, paper, Textile, welding and other industries. Application: Paint Grade CMC :With good dispersion, coating evenly distributed; not hierarchical and stable performance; has good tackifying effect, you can adjust the paint Viscosity; improve rheological property of the paint ;most of the surface-active agents and preservatives can be used with water-soluble paint match. CMC can be used in ceramic body, glazing pulp, and decoration. Used in ceramic body, it is a good strengthening agent, which can strengthen the mouldability of mud and sand materials, help the shaping of the base and increase the folding strength of the green body. Used in glazing pulp and decoration, it is a binder that plays a role of suspending, uncoagulating, and keeping water. In paper making industry, CMC is used to make the paint for coated paper, as additive in wet-end and sizing agent for surface. We have different paper making grades of CMC products to satisfy different customersâ?? requirements CMC is used in mining industry as pellet binder and floating selection inhibitor. CMC is a component of the binder for mineral dust shaping, and the binder is an indispensable ingredient in pellet forming. it can improve the character of wet pellet, dry pellet and calcinated pellet. Due to its good binding property and pellet forming property, the green pellet with CMC has excellent antiknock performance, high compressive strength and dropping resistance. It can also increase the grade of pellet. PAC (Poly anionic Cellulose) is a water-soluble polymer produced from cellulose chemically reacted with carboxy-methyl(anionic) groups which is widely used in water-based drilling fluid for a variety of applications, such as filtration control, viscosity and shale inhibition.
General Specification 1. Main Features Operationg SyetemWindow 7 Monitor 10.4 inch LCD monitor Scanning ModeB, B/B, 4B, B/M, M, 3D Image Reconstruction KeyboardBack-lit Silicone Keyboard (option) Cine LoopUp to 1024 frames Gain0-255dB TGC8 segment Scanning DepthUp to 240mm Dynamic Range20-150dB Pseudo-color40, or customized Body Marking140 Focus4 Magnification0.8-6.0 Probe Connector2 LanguageChinese/English/Spanish Matching PrinterLaser/Vedio/Inkjet/Thermal printer Peripheral PortUSB, DICOM3.0, RS232, VGA, VCR, PAL-D Measurement & CalculationB-mode: Distance, Perimeter, Area, Volume, Angle, Histogram, Cross Section, Hip Joint Angle M-mode: Heart Rate, Time, Gradient Image Processing TechnologiesTHI, Pre-process, Post-process, Dynamic Range, Contrast, Frame Correlation, Average Line, Edge Enhancement, Black-white Change over, Gray-scale Transformation&Adjustment, Brightness, Gamma Correction  2. Applications Abdominal(Liver, Gallbladder, Spleen, Kidney, Pancreas) Gynecology(Uterus, Cervix Uterus, Endometrium, Ovary, Ovarian Follicle, Hydatoncus, Enclosed Mass) Obstetric(AC, BPD, CRL, FL, THD, GS, OFD, HUMERUS, TIDIA, ULNA, HC, TAD, APTD, FTA, AFI, Analytic report of fetus and the growth curve) Cardiology(LV, LV Function, Aorta, Mitral, Valve) Urology(Left Renal Volume, Right Renal Volume, RUV, Prostate kidney) Small Parts(Ophthalmology, Thyroid, Jaw and Face) 3. Standard Configuration Main system unit, 3.5MHz Convex probe, Lithium battery, Power adapter, Carrier suitcase, User manual and disc 4. Optional Items Biopsy Bracket 5. Probes Selection 3.5 MHz Convex Probe (3.5-14MHz variable frequency ) 7.5 MHz Linear Probe (3.5-14MHz variable frequency ) 7.5 MHz Transvaginal Probe (3-10MHz variable frequency) 5.0 MHz Micro-Convex Probe (2-6MHz variable frequency) 7.5 MHz Rectal Probe(80 elements) 6. Advanced Technologies PC platform Full Digital Ultrasonic Kernel Engine One Touch Optimizer Tissue Harmonic Imaging 3D Imaging Reconstruction DICOM 3.0 Packaging & Delivery Packaging Details: Aluminum Case+Box Package Net Weight: 2.5kg Gross Weight: 7kg Package Size: 370*295*170mm Delivery Time: 5-10 working days Warranty Two years for main unit (One year warranty for probes) Please let us know your specific request. We would like to recommend you the most suitable model based on your information.
General Specification 1. Main Features  Operationg SyetemWindow XP Monitor 10.4 inch CRT monitor Scanning ModeB, 2B, 4B, B/M, 3D image reconstruction KeyboardBack-lit Silicone Keyboard (option) Cine LoopUp to 256 frames Gain0-128dB TGC8 segment Scanning DepthUp to 240mm Dynamic Range30-120dB Pseudo-color40, or customized Body Marking140 Focus4 Magnification0.8-6.0 Probe Connector2 LanguageChinese/English/Spanish Matching PrinterLaser/Vedio/Inkjet/Thermal printer Peripheral PortUSB, VGA, DICOM3.0, RS232, VIDEO OUT Measurement & CalculationB-mode: Distance, Perimeter, Area, Volume, Angle, Histogram, Cross Section, Hip Joint Angle M-mode: Heart Rate, Time, Gradient Image Processing TechnologiesTHI, Pre-process, Post-process, Dynamic Range, Contrast, Frame Correlation, Average Line, Edge Enhancement, Black-white Change over, Gray-scale Transformation&Adjustment, Brightness, Gamma Correction  2. Applications Abdominal(Liver, Gallbladder, Spleen, Kidney, Pancreas) Gynecology(Uterus, Cervix Uterus, Endometrium, Ovary, Ovarian Follicle, Hydatoncus, Enclosed Mass) Obstetric(AC, BPD, CRL, FL, THD, GS, OFD, HUMERUS, TIDIA, ULNA, HC, TAD, APTD, FTA, AFI, Analytic report of fetus and the growth curve) Cardiology(LV, LV Function, Aorta, Mitral, Valve) Urology(Left Renal Volume, Right Renal Volume, RUV, Prostate kidney) Small Parts(Ophthalmology, Thyroid, Jaw and Face) 3. Standard Configuration Main system unit, 3.5MHz Convex probe, User manual and disc 4. Optional Items Biopsy Bracket 5. Probes Selection 3.5 MHz Convex Probe (3.5-14MHz variable frequency ) 7.5 MHz Linear Probe (3.5-14MHz variable frequency ) 7.5 MHz Transvaginal Probe (3-10MHz variable frequency) 5.0 MHz Micro-Convex Probe (2-6MHz variable frequency) 7.5 MHz Rectal Probe(80 elements) 6. Advanced Technologies PC platform Full Digital Ultrasonic Kernel Engine Tissue Harmonic Imaging 3D Imaging Reconstruction DICOM 3.0 Packaging & Delivery Packaging Details: Box Package Net Weight: 12kg Gross Weight: 18kg Package Size: 500*400*450mm Delivery Time: 5-10 working days Warranty Two years for main unit (One year warranty for probes)
