This machine is powered by the M165 two-stroke petrol engine imported from Spain. It is a small machine used for forming and grinding the rail head welding joints and surface repairs. It is suitable for rails of 43~75kg/m. The special diaphragm carburetor make sure the engine does not stall after turning 90�°, and the output torque is stable without power attenuation, thus ensuring the precision of rail grinding. Specification Model NGM-6.0 Type Rail Profile Grinder Material Stainless Steel Dimensions (L x W x H) (mm) 1410*500*850mm Engine 2 stroke petrol engine M165 Power 6.0kW Grinding stone speed â?¥3900r/min Grinding stone inclination 0~90�° Grinding stone feeding stroke 42mm Grinding stone specification �?150x�?55x70mm Fuel tank volume 4.5L Profile wheel span 1000mm Feed adjustment accuracy 0.125mm Weight 60kg
Lithium battery powered Rail bolt wrench machine (model: LJ-LDB171X) is composed of host, control system, battery system and rail traveling part. The utility model has the advantages of compact structure, light weight, flexible assembly and disassembly, convenient use and no exhaust emission. It can be transported separately, which is convenient for single person to carry on site. The weight of the separated part is less than 15kg. It is applicable to the laying, maintenance and emergency rescue of railway, and is specialized in various railway bolt operations Specification Model LJ-LDB1701X Type Lithium Battery Torque Wrench Material Stainless Steel Dimensions (L x W x H) (mm) 1100*700*450mm Type Battery powered rail bolt wrench Rated voltage (DCV) 24-48 Max. torque 3000 N.m Motor speed (RPM) 0-3000 optional Impact frequency (BPM) 0-5000 optional Battery pack capacity (ah) 24-48 Operating temperature range (-40 ~ 50 â??) Operating range m6-m30 Torque control adjustable and controllable Weight 22kg
NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x 25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail 0.30mm Deviation of bidirectional cutting interfaces 0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Inward tilting of rails by 1 in 20. The wheel-set was first assembled by mounting the wheels symmetrically on to the axle at a clear spacing of 1600 mm, in accordance with the specifications. The wheel-set was further mounted on to the rails, aligning the wheels to travel in the forward direction of the rails, as shown in figure 2. The movement of wheels were allowed only in the longitudinal direction of rails, and the movements in the lateral and vertical directions were constricted. The implementation of high speed railways in India are in their early phases and vast studies are being conducted for the effective implementation of the system. Maintaining the traction required for efficient operation of trains at high speeds requires the net minimum frictional coefficient to be maintained at the wheel-rail interface.
LJ-LDG1901 Electric Rail Drilling Machine 36V Intelligent lithium battery rail drilling machine *Fully waterproof design, support rainy day work *Clean energy, green and pollution-free *Intelligent control system, keeps drilling at a constant speed, and displays the number of holes with remaining power *Super endurance capability : Drilling more than 40 holes each charge (31 mm diameter hole) Drilling more than 110 holes each charge (13.5 mm diameter hole) Drilling more than 180 holes each charge (9.8 mm diameter hole) *Ultra-light weight, only 15.9 kg including battery *Overload reminder and protection design *Quick-change design of the drill bit, do not need any additional tools
The device holds in position the rails during the welding operation and is adaptable to all rail types: vignole, crane rails and grooved rails. Specification Type Shoulders Material Alloy Steel Dimensions (L x W x H) (mm) 600*540*170mm Place of Origin LN, China Span 460mm Max. lifting force 15KN
The Rail Clamp is an innovative temporary rail joint clamp used prior to welding and to safeguard rail defects prior to repair. The Rail Clamp has been engineered to eliminate many of the disadvantages of other traditional rail clamp designs and provides enhanced performance under all conditions of use. The Rail Clamp design is radically different to the legacy design and guarantees a positive pre-torque angle so as the bolt is tightened the bolt holes remain aligned, eliminating the risk of bent bolts. We test have proved that bolts remain straight even at twice the recommended torque. · Allows suction jars to be attached to stand rail · One rail clamp holds one canister · Rail can hold up to four rail clamps and canisters
Brake Shoes braking is to place iron brake shoes on one or two rails, and the train rolling wheel slides along the rail after pressing the brake shoes. The rolling friction between the wheel and rail changes into sliding friction to prevent the wheel from moving forward and play the role of braking.
The machine is suitable for tamping operation on various rail and concrete sleeper track after the overhaul and medium ballast cleaning operation, and also suitable for tamping operation on the ballast bed of new track. This machine has the features of high quality performance, reasonable structure, reliable and high working efficiency, which will satisfy the requirement of ballast tamping operation. Specification Model YD-22 Type Rail Tamping Machine Material Stainless Steel Dimensions (L x W x H) (mm) 1300 * 750 * 1600mm Engine Diesel Engine SF190 Power 7kW Vibrating force 22kN Vibrating frequency 66.7Hz Hydraulic system working pressure 5~6MPa Max insert force 16kN Max clamping force 6.5kN * 2 Production efficiency â?¥ 270 pieces / (group â?¢ hour) Inserting depth 110mm ± 10mm (underneath the sleeper) Weight 439kg
NQG5III Internal combustion rail cutting machine is suitable for cutting rails of 43kg/m75kg/m . The quality of cutting section meets the requirement of railway industrial standards. Its a necessary tool used in railway overhaul, maintenance and rush repairing operation. It has features of fast cutting speed, high utilization rate of thin grinding wheel, high quality of cutting section, easy operation, easy movement, safe use and wide application range etc.
NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories.
NQG 5.1 Rail Cutting Machine To furnish the varying desires of our customers, we are immersed in offering a world class consignment of Abrasive Rail Cutter. Abrasive Rail Cutter is suitable for cutting upto 60 Kg. 110 uts Rails. the machine has features of fast cutting speed, high utilization rate of cutting discs, high quality of cutting profile, convenient operation, easy motion and safe use. the machine comprises of petrol driven engine, integrated with a cutting unit fitted with an abrasive disc.
NQG5.1 Rail Cutting Machine To furnish the varying desires of our customers, we are immersed in offering a world class consignment of Abrasive Rail Cutter. Abrasive Rail Cutter is suitable for cutting upto 60 Kg. 110 uts Rails. the machine has features of fast cutting speed, high utilization rate of cutting discs, high quality of cutting profile, convenient operation, easy motion and safe use. the machine comprises of petrol driven engine, integrated with a cutting unit fitted with an abrasive disc.
NLB-300 railway construction rail fastener wrench is used for tightening and loosening sleeper bolts, hook-bolt nuts, etc. High power petrol engine ensure large torque and high working efficiency. Specification Model NLB-300 Type Rail Impact Wrench Material Stainless Steel Dimensions (L x W x H) (mm) 1300*510*760mm Main shaft rpm 780r/min Max. loosen torque 300 Nâ?¢m Max. fasten torque 150 Nâ?¢m Working efficiency 10 pieces/min Petrol engine 1) Model: GX160 (2) Rated power: 4Kw (3) RPM: 3600r/min Weight 60kg
The Battery powered rail cutting machine has passed the strict verification of protection grade, and supports the work in rainy and snowy weather; Professional lithium battery platform for ultra long endurance operation; The equipment can be used normally under extreme conditions such as high cold and high altitude; The lithium battery has passed the safety test conducted by the national authority. Specification Voltage 72V Power 5KW Cutting time
Track tools, railway gauge, rail machine.
Rail track gauge, rail cutting machine, rail wrenching machine, rail grinding machine, rail tamping machine, rail drilling machine.
Rail track gauge rail cutting machine rail wrenching machine rail grinding machine rail tamping machine rail drilling machine other rail machine railway tools railway supplies.
Rail cutting machine rail wrenching machine rail grinding machine rail tamping machine rail drilling machine other rail machine rail track gauge.
Rail track gauge rail cutting machine rail wrenching machine rail grinding machine rail tamping machine rail drilling machine other rail machine railway tools railway supplies.