Coconut : a. Grade A Coconut semi husk with grade A has the largest diameter specification compared to other grades. The largest the diameter, the thicker the coconut flesh. Grade A has better meat quality than other grade. Form : coconut, More small from regular Meat Color : to white clean Colour : Light Brow Maturity : Mature Grade : A Weight : 1000-2000 g/Nut Diameter : 15cm Packaging : waring Net bag or as customer requirements b. Grade B Grade B of Cocout half coir has a medium diameter size also affects the quality of the coconut meat produced. Of course, the thickness of the resulting meat is thinner than Grade A. From : coconut. More small from regular Meat color : to white clean colour : Light Brown Maturity : Mature Grade : B Weight : 800 1000 g/Nut Origin : Indonesia Diameter : 12 cm Packaging : waring Net bag or as customer requirements c. Grade C Grade B of Cocout half coir has a medium diameter size also affects the quality of the coconut meat produced. Of course, the thickness of the resulting meat is thinner than Grade A and B. From : coconut. More small from regular Meat color : to white clean colour : Light Brown Maturity : Mature Grade : C Weight : 500 - 800 g/Nut Diameter : 7 cm Packaging : waring Net bag or as customer requirements
Forklift Series Lithium Iron Phosphate Battery Pack Parameters Series parameters Remarks No Items 48V 72V 80V 1 Cell material type Lithium iron phosphate 2 Nominal voltage 51.2 76.8 83.2 3 Operating voltage range 40-58.4 60-87.6 65-94.9 4 Nominal capacity 172-700 Customizable within the range 5 Charge cut-off voltage 58.4 87.6 94.9 6 Discharge cut-off voltage(V) 40 60 65 7 Standard charging current(A) 1 Constant current charging at 25 C ambient conditions 8 Standard discharge current (A) 1 Constant current discharge at 25 C ambient conditions 9 Discharge operating temperature range 10 Charging temperature range 11 Storage ambient temperature) (-20 - 55, short term, within 1 month; 0 - 35, long term, within 1 year) 12 Storage environment humidity(RH) 5% 95% 13 Humidity of the working environment(RH) 85% 14 Cycle life at room temperature 25 C, 3000 cycles (80% of rated capacity) 1C charge/discharge multiplier 15 High temperature cycle life 45 C, 2000 cycles (80% of rated capacity) 1C charge/discharge multiplier 16 Self-discharge rate at room temperature(%) 3%/month, 25 C 17 High temperature self-discharge rate (%) 5%/month, 45 C 18 High temperature discharge performance 95% (1. Battery charged in standard charging mode (battery charged at 1C constant current and constant voltage to 3.65V, cut-off current 0.05C; discharged at 1.0C constant current to a minimum discharge voltage of 2.5V at 45 C 2) 19 Low temperature discharge performance 70% (1. Battery charged in standard charging mode (battery charged at 1C constant current and constant voltage to 3.65V; discharged at 0.2C constant current to 2.5V at -20 2C) 20 Case size Customised according to customer requirements 21 Control systems BMS solutions
Forklift Series Lithium Iron Phosphate Battery Pack Parameters Series parameters Remarks No Items 48V 72V 80V 1 Cell material type Lithium iron phosphate 2 Nominal voltage 51.2 76.8 83.2 3 Operating voltage range 40-58.4 60-87.6 65-94.9 4 Nominal capacity 172-700 Customizable within the range 5 Charge cut-off voltage 58.4 87.6 94.9 6 Discharge cut-off voltage(V) 40 60 65 7 Standard charging current(A) 1 Constant current charging at 25 C ambient conditions 8 Standard discharge current (A) 1 Constant current discharge at 25 C ambient conditions 9 Discharge operating temperature range 10 Charging temperature range 11 Storage ambient temperature (-20 - 55, short term, within 1 month; 0 - 35, long term, within 1 year) 12 Storage environment humidity(RH) 595% 13 Humidity of the working environment(RH) 85% 14 Cycle life at room temperature 25°C, 3000 cycles 80% of rated capacity) 1C charge/discharge multiplier 15 High temperature cycle life 45°C, 2000 cycles (80% of rated capacity) 1C charge/discharge multiplier 16 Self-discharge rate at room temperature 3%/month, 25°C 17 High temperature self-discharge rate 5%/month, 45°C 18 High temperature discharge performance 95% (1. Battery charged in standard charging mode (battery charged at 1C constant current and constant voltage to 3.65V, cut-off current 0.05C; discharged at 1.0C constant current to a minimum discharge voltage of 2.5V at 45 19 Low temperature discharge performance 70% (1. Battery charged in standard charging mode (battery charged at 1C constant current and constant voltage to 3.65V discharged at 0.2C constant current to 2.5V at -20±2C) 20 Case size Customised according to customer requirements 21 Control systems BMS solutions
Customized stamped parts progressive die Stamped Parts Progressive Die, Progressive Stamping Die Factory Dongguan Huisoelec Limited, established in August 2009 and located in the hometown of Chinese molds - Chang'an Town, Dongguan City, Guangdong Province, is a professional manufacturer of precision tooling and metal stamping company, such as precision connector, precision terminal, fixed rotor motor, housing, precision shrapnel etc., ranging from small to complex size, metal and plastic components. Out products are widely used in hundreds of application, for example, mobile computer equipment, digital cameras, mobile communications equipment, automotive / aviation / marine electronic components, medical electronics, smart appliances, IC, 3C products and outdoor waterproof fields and so on. No. Item Description 1 Tooling type Stage die/progressive die/drawing die 2 Tooling Material RK887, CD650, KD20, SKD11, SKH9, DC53 3 Application Electronics, electrical appliance, auto parts, medical, communication and military field etc., 4 Punching machine 25T, 35T, 45T, 60T, 110T, 200T, 250T 5 Lead time 8, 12, 15, 20, 25 or 30 days (depends on the real situation of tooling) 6 Tolerence ±0.002 7 Mold life Max 100kk, depends on the clients need 8 Packing Plastic, carton or wooden box etc., according to the clients requirements
High quality electronic parts stamping die Oem electronic stamping die, china high quality electronic stamping die factory Dongguan huisoelec limited, established in august 2009 and located in the hometown of chinese molds - chang'an town, dongguan city, guangdong province, is a professional manufacturer of precision tooling and metal stamping company, such as precision connector, precision terminal, fixed rotor motor, housing, precision shrapnel etc., ranging from small to complex size, metal and plastic components. Out products are widely used in hundreds of application, for example, mobile computer equipment, digital cameras, mobile communications equipment, automotive / aviation / marine electronic components, medical electronics, smart appliances, ic, 3c products and outdoor waterproof fields and so on. No., item, description 1, tooling type, stage die/progressive die/drawing die 2, tooling material, rk887, cd650, kd20, skd11, skh9, dc53 3, application, electronics, electrical appliance, auto parts, medical, communication and military field etc., 4, punching machine, 25t, 35t, 45t, 60t, 110t, 200t, 250t 5, lead time, 8, 12, 15, 20, 25 or 30 days (depends on the real situation of tooling) 6, tolerence, ±0.002 7, mold life, max 100kk, depends on the clients need 8, packing, plastic, carton or wooden box etc., according to the clients requirements
Precision Connector Terminal Stamping Die Connector Stamping Mould, High Quality Drawing Die Dongguan Huisoelec Limited, established in August 2009 and located in the hometown of Chinese molds - Chang'an Town, Dongguan City, Guangdong Province, is a professional manufacturer of precision tooling and metal stamping company, such as precision connector, precision terminal, fixed rotor motor, housing, precision shrapnel etc., ranging from small to complex size, metal and plastic components. Out products are widely used in hundreds of application, for example, mobile computer equipment, digital cameras, mobile communications equipment, automotive / aviation / marine electronic components, medical electronics, smart appliances, IC, 3C products and outdoor waterproof fields and so on. No. Item Description 1 Tooling type Stage die/progressive die/drawing die 2 Tooling Material RK887, CD650, KD20, SKD11, SKH9, DC53 3 Application Electronics, electrical appliance, auto parts, medical, communication and military field etc., 4 Punching machine 25T, 35T, 45T, 60T, 110T, 200T, 250T 5 Lead time 8, 12, 15, 20, 25 or 30 days (depends on the real situation of tooling) 6 Tolerence ±0.002 7 Mold life Max 100kk, depends on the client's need 8 Packing Plastic, carton or wooden box etc., according to the client's requirements
Anti-burst Yoga Ball, Peanut Fitness Yoga Ball, Balance Training Peanut Yoga Ball Supplier Peanut Yoga Ball System Parameters: Product Name Customized Wholesale Anti-burst Peanut Fitness Yoga Ball for Balance Training Material: PVC Color: White/silver/green/red/yellow/blue/purple/black or Custom Color Size: 45*90/50*100 or Custom Size Logo: Custom Logo MOQ: 100pcs Delivery time: (1)7-10 working days-for existing products (2)10-15 working days-if need customized logo OEM Service: Yes Certification Available: Yes Packing details: Poly Bag+Carton Production Capacity: 80000 Piece/Pieces per Month Payment Term: L/C,T/T,D/P,PAYPAL,Trade assurance Peanut Yoga Ball Description: Customized Wholesale Anti-burst Peanut Fitness Yoga Ball for Balance is made of thick eco PVC material, Latex free and Phthalates free. SGS tested. Anti-burst rubber compound prevents the ball from violently bursting if punctured. To inflate the peanut ball to its full size, pump the ball with included hand pump. Add more air after 12 hours until it is fully expanded. 1. The ball surface is slip resistant, feel great when your skin on it. 2. Ideal for weight lifting exercise, therapy, labor birthing and dog training. 3. Easy to integrate into almost any training regimen. Great for use at the gym, in yoga, or in your living room. 4. Stretch and strengthen the spine while increasing the range of motion. It's safe and suitable for all age including children and seniors. The unique shape of this ball provides children and seniors with added stability for balance, exercise and vestibular therapy. 5. Ball only rolls forward and backward. Provides lateral stability and is more stable than traditional round balls.
passenger elevator factory IFE Passenger Elevators Passenger elevators/ lifts are designed to transport people from one floor to another within a building. The passenger elevator for sale is commonly found in residential buildings, office buildings, hotels, and other multi-level structures. Different Types of Passenger Lifts Machine Room Passenger Elevators METIS-CR1 METIS-CR Passenger Elevators Working Principle The passenger ife lift cabin working principle is that the two ends of the traction rope are connected to the car and the counterweight respectively, and are wound on the traction sheave and the guide wheel. The traction force generated by the friction of the wheels realizes the lifting and lowering of the car and the counterweight to achieve the purpose of transportation. How To Choose The Capacity Of Your Passenger Elevators? When selecting and configuring passenger lifts for sale, you should carefully understand the building's own situation and use environment, including the building's use, scale, height, passenger and cargo; flow, etc. IFE Electric Traction Passenger Elevators FAQ How long is the warranty period? The passenger lift maintenance standard is at least 12 months, you can consult the salesman about extending the warranty; How long is the fastest delivery time? According to the actual situation of the project, different types of elevators delivery time may be different, and the fastest standard is within 3 months; How much does custom passenger elevator cost, passenger elevator price? The passenger elevator/ lift price/ cost is determined by a variety of circumstances, including floor height, car size, elevator speed, etc. Please consult relevant business personnel. What about the passenger lift maintenance? IFE Elevators is a company that provides comprehensive maintenance services for passenger lifts. Our maintenance services are designed to ensure the safety, reliability, and longevity of the elevators. Hereâ??s a general overview of our maintenance process: Regular Inspections: IFE Elevatorsâ?? technicians conduct regular inspections of the passenger lifts. This includes checking the mechanical and electrical components, the lift car, the doors, and the control system. Compliance Checks: The maintenance services also ensure that the passenger lifts comply with all relevant safety standards and regulations. Record Keeping: Detailed records of all maintenance activities are kept. This helps in tracking the performance and condition of the lift over time.
IPS-12RS Syringe Pump The IPS-12RS Syringe Pump is a versatile and precision-engineered device designed to meet the diverse fluid handling needs across various industries. With its advanced features and robust construction, the IPS-12RS offers unparalleled reliability and performance. Key Features: Wide Syringe Compatibility: The IPS-12RS accommodates syringes made of glass, plastic, and steel, offering versatility in fluid handling applications. It supports syringes ranging from Hamilton 0.5 l to Monoject 140 ml, providing flexibility to users for different volume requirements. Precise Flow Control: With a broad flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-12RS ensures accurate and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, enables precise control over flow rates, guaranteeing reliable performance in various tasks. Intuitive Interface: Equipped with a 4.3-inch Resistive Touch TFT LCD screen and powered by user-friendly microcontroller software, the IPS-12RS offers an intuitive interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: The IPS-12RS allows for adjustable flow rates even during the pumping process, enabling users to fine-tune parameters as needed for optimal performance. This adaptability ensures versatility in handling diverse fluid handling tasks with precision and control. 5 Steps Operation Mode: The IPS-12RS offers a 5 Steps Operation Mode, allowing users to program multi-step pumping processes with ease and precision. Saving and Recalling Recipes: Users can save and recall up to 5 recipes, streamlining operations and ensuring consistent performance. Repeating Recipes: The IPS-12RS enables users to repeat recipes up to 50 cycles, providing flexibility and efficiency in repetitive tasks. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: Yes Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 211 mm, Length (L): 170 mm, Height (H): 137 mm Weight: 2.2 kg Environmental Specifications: Operating Temperature: Between -10�°C and 50�°C Storage Temperature: Between -30�°C and 85�°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: Wi-Fi connectivity (optional)
IPS-14RS Syringe Pump The IPS-14RS Syringe Pump is a sophisticated dual-channel fluid handling system designed to meet the exacting demands of modern laboratories and industrial settings. Offering precise control and advanced features, the IPS-14RS enables efficient and accurate fluid delivery for a variety of applications. Key Features: Independent Syringe Channels: Featuring two independent syringe channels, the IPS-14RS allows for simultaneous operation of different fluids or independent control over each channel. This capability enhances flexibility and efficiency in fluid handling tasks. Wide Syringe Compatibility: Compatible with glass, plastic, and steel syringes, the IPS-14RS accommodates syringes ranging from Hamilton 0.5 l (ID: 0.103mm) to Monoject 140 ml (ID: 38mm). This versatility enables users to handle various volumes with ease. Precise Flow Control: The IPS-14RS offers precise control over flow rates, with a range from 17.89 picoliters per minute to 121.51 milliliters per minute. Equipped with a stepper motor and microcontroller featuring Microstep Drive technology, it ensures accurate and consistent fluid delivery. Intuitive Interface: With a 4.3-inch Resistive Touch TFT LCD screen and user-friendly microcontroller software, the IPS-14RS provides an intuitive interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing productivity. Adaptive Pumping: Users can adjust flow rates even during the pumping process, allowing for fine-tuning of parameters for optimal performance. This adaptability ensures precise fluid handling for a wide range of applications. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 211 mm, Length (L): 257 mm, Height (H): 137 mm Weight: 3.6 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: 5 Steps Operation Mode: Allows programming of up to 5 different steps for precise fluid handling. Saving and Recalling Recipes: Users can save and recall up to 5 recipes for convenient operation. Repeating Cycles: Capable of repeating recipes up to 50 cycles, enhancing efficiency in repetitive tasks.
IPS-14R Syringe Pump The IPS-14R Syringe Pump is a cutting-edge dual-channel device designed to provide precise and reliable fluid handling in various applications. With its innovative features and robust construction, the IPS-14R offers versatility and accuracy for demanding fluid delivery processes. Key Features: Independent Syringe Channels: Featuring two independent syringe channels, the IPS-14R allows simultaneous operation of different fluids or separate control over each channel. This feature enhances flexibility and efficiency in multi-channel applications. Wide Syringe Compatibility: The IPS-14R accommodates a wide range of syringe types, including glass, plastic, and steel. It supports syringes ranging from Hamilton 0.5 l (ID: 0.103mm) to Monoject 140 ml (ID: 38mm), providing versatility to meet various volume requirements. Precise Flow Control: With a broad flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-14R ensures accurate and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, enables precise control over flow rates with a resolution of 357 nm/ step. Intuitive Interface: Equipped with a 4.3-inch Resistive Touch TFT LCD screen and user-friendly microcontroller software, the IPS-14R offers an intuitive interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: Users can adjust flow rates even during the pumping process, allowing for fine-tuning of parameters for optimal performance. This adaptive capability ensures precise handling of fluid delivery tasks with flexibility and control. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: No Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 211 mm, Length (L): 257 mm, Height (H): 137 mm Weight: 3.6 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed)
IPS-14S Syringe Pump The IPS-14S Syringe Pump is an advanced dual-channel fluid handling device designed to meet the demanding requirements of various industries. With its versatile features and precise control, the IPS-14S offers reliable performance for a wide range of fluid delivery applications. Key Features: Independent Syringe Channels: The IPS-14S features two independent syringe channels, allowing simultaneous operation of different fluids or separate control over each channel. This versatility enables efficient handling of complex fluid delivery tasks. Wide Syringe Compatibility: Compatible with glass, plastic, and steel syringes, the IPS-14S supports syringes ranging from Hamilton 0.5 l (ID: 0.103mm) to Monoject 140 ml (ID: 38mm). This broad compatibility provides flexibility to users for various volume requirements. Precise Flow Control: With a flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-14S ensures accurate and consistent fluid delivery. Its stepper motor and microcontroller with Microstep Drive technology offer precise control over flow rates with a resolution of 357 nm/�¼step. Intuitive Interface: Equipped with a 4.3-inch Resistive Touch TFT LCD screen and user-friendly microcontroller software, the IPS-14S provides an intuitive interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: The IPS-14S allows for adjustable flow rates even during the pumping process, enabling users to fine-tune parameters for optimal performance. This adaptability ensures precise handling of fluid delivery tasks with flexibility and control. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 200 mm, Length (L): 257 mm, Height (H): 137 mm Weight: 3.3 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: 5 Steps Operation Mode: Enables users to program up to 5 different steps for precise fluid handling. Saving and Recalling Recipes: Allows users to save and recall up to 5 recipes for convenient operation. Repeating Cycles: Capable of repeating recipes up to 50 cycles, enhancing efficiency in repetitive tasks.
IPS-14 Syringe Pump The IPS-14 Syringe Pump is a sophisticated dual-channel device designed to meet the complex fluid handling requirements in various industries. With its precision engineering and innovative features, the IPS-14 ensures reliable performance and precise control over fluid delivery processes. Key Features: Independent Syringe Channels: Equipped with two independent syringe channels, the IPS-14 allows for simultaneous operation of different fluids or independent control over each channel. This feature enhances flexibility and efficiency in multi-channel applications. Wide Syringe Compatibility: The IPS-14 supports a wide range of syringe types including glass, plastic, and steel. It accommodates syringes from Hamilton 0.5 �¼l (ID: 0.103mm) to Monoject 140 ml (ID: 38mm), providing versatility to meet various volume requirements. Precise Flow Control: With a comprehensive flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-14 ensures precise and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, allows for accurate flow rate control with a resolution of 357 nm/ step. Intuitive Interface: The IPS-14 is equipped with a 4.3-inch Resistive Touch TFT LCD screen and intuitive microcontroller software, offering users a user-friendly interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: Users can adjust flow rates even during the pumping process, enabling fine-tuning of parameters for optimal performance. This adaptive capability ensures precise handling of fluid handling tasks with flexibility and control. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: No Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 200 mm, Length (L): 257 mm, Height (H): 137 mm Weight: 3.3 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed)
IPS-13RS Syringe Pump The IPS-13RS Syringe Pump is an advanced dual-channel device designed to meet the complex fluid handling requirements in various industries. With its precision engineering and innovative features, the IPS-13RS ensures reliable performance and precise control over fluid delivery processes. Key Features: Interdependent Syringe Channels: Equipped with two interdependent syringe channels, the IPS-13RS allows for simultaneous and coordinated fluid handling operations. This feature enhances efficiency and flexibility in multi-channel applications. Wide Syringe Compatibility: The IPS-13RS supports a wide range of syringe types including glass, plastic, and steel. It accommodates syringes from Hamilton 0.5 �¼l (ID: 0.103mm) to Monoject 140 ml (ID: 38mm), providing versatility to meet various volume requirements. Precise Flow Control: With a comprehensive flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-13RS ensures precise and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, allows for accurate flow rate control with a resolution of 357 nm/�¼step. Intuitive Interface: The IPS-13RS is equipped with a 4.3-inch Resistive Touch TFT LCD screen and intuitive microcontroller software, offering users a user-friendly interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: Users can adjust flow rates even during the pumping process, enabling fine-tuning of parameters for optimal performance. This adaptive capability ensures precise handling of fluid handling tasks with flexibility and control. Additional Features: 5 Steps Operation Mode Saving and Recalling Subsequently Up to 5 Recipes Repeating recipes up to 50 Cycles Double-channel design for simultaneous operation Wi-Fi connectivity for enhanced functionality Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 211 mm, Length (L): 250 mm, Height (H): 143 mm Weight: 3.2 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed)
IPS-13S Syringe Pump The IPS-13S Syringe Pump is a sophisticated dual-channel device designed to meet the complex fluid handling requirements in various industries. With its advanced features and precision engineering, the IPS-13S ensures reliable performance and precise control over fluid delivery processes. Key Features: Interdependent Syringe Channels: Equipped with two interdependent syringe channels, the IPS-13S allows for simultaneous and coordinated fluid handling operations. This feature enhances efficiency and flexibility in multi-channel applications. Wide Syringe Compatibility: The IPS-13S supports a wide range of syringe types including glass, plastic, and steel. It accommodates syringes from Hamilton 0.5 �¼l (ID: 0.103mm) to Monoject 140 ml (ID: 38mm), providing versatility to meet various volume requirements. Precise Flow Control: With a comprehensive flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-13S ensures precise and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, allows for accurate flow rate control with a resolution of 357 nm/ step. Intuitive Interface: The IPS-13S is equipped with a 4.3-inch Resistive Touch TFT LCD screen and intuitive microcontroller software, offering users a user-friendly interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: Users can adjust flow rates even during the pumping process, enabling fine-tuning of parameters for optimal performance. This adaptive capability ensures precise handling of fluid handling tasks with flexibility and control. Additional Features: 5 Steps Operation Mode Saving and Recalling Subsequently Up to 5 Recipes Repeating recipes up to 50 Cycles Double-channel design for simultaneous operation Wi-Fi connectivity for enhanced functionality Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 200 mm, Length (L): 250 mm, Height (H): 143 mm Weight: 2.9 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed)
IPS-13R Syringe Pump The IPS-13R Syringe Pump is an advanced dual-channel device designed to fulfill complex fluid handling requirements across various industries. With its precision engineering and innovative features, the IPS-13R ensures reliable performance and precise control over fluid delivery processes. Key Features: Interdependent Syringe Channels: Equipped with two interdependent syringe channels, the IPS-13R enables simultaneous and coordinated fluid handling operations, optimizing efficiency and flexibility in multi-channel applications. Wide Syringe Compatibility: The IPS-13R supports a wide range of syringe types including glass, plastic, and steel. It accommodates syringes from Hamilton 0.5 �¼l (ID: 0.103mm) to Monoject 140 ml (ID: 38mm), providing versatility to meet various volume requirements. Precise Flow Control: With a comprehensive flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-13R ensures precise and consistent fluid delivery. Its stepper motor, coupled with a microcontroller featuring Microstep Drive technology, allows for accurate flow rate control with a resolution of 357 nm/�¼step. Intuitive Interface: The IPS-13R is equipped with a 4.3-inch Resistive Touch TFT LCD screen and intuitive microcontroller software, offering users a user-friendly interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: Users can adjust flow rates even during the pumping process, enabling fine-tuning of parameters for optimal performance. This adaptive capability ensures precise handling of fluid handling tasks with flexibility and control. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 211 mm, Length (L): 250 mm, Height (H): 143 mm Weight: 3.2 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: Double-channel design for simultaneous operation 4.3 Resistive Touch TFT LCD screen Microcontroller software for advanced control User-friendly interface for ease of operation High-precision pumping for accurate fluid handling
IPS-13 Syringe Pump The IPS-13 Syringe Pump is a highly versatile and precision-engineered device designed to meet the diverse fluid handling needs across various industries. With its advanced features and robust construction, the IPS-13 offers reliable performance and precise control over fluid delivery processes. Key Features: Interdependent Syringe Channels: The IPS-13 features two interdependent syringe channels, allowing for simultaneous and coordinated fluid handling operations. This feature enhances efficiency and flexibility in multi-channel applications. Wide Syringe Compatibility: The IPS-13 accommodates syringes made of glass, plastic, and steel, offering versatility in fluid handling applications. It supports syringes ranging from Hamilton 0.5 �¼l to Monoject 140 ml, providing flexibility to users for different volume requirements. Precise Flow Control: With a broad flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-13 ensures accurate and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, enables precise control over flow rates, guaranteeing reliable performance in various tasks. Intuitive Interface: Equipped with a 4.3-inch Resistive Touch TFT LCD screen and powered by user-friendly microcontroller software, the IPS-13 offers an intuitive interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: The IPS-13 allows for adjustable flow rates even during the pumping process, enabling users to fine-tune parameters as needed for optimal performance. This adaptability ensures versatility in handling diverse fluid handling tasks with precision and control. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 200 mm, Length (L): 250 mm, Height (H): 143 mm Weight: 2.9 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: Double Channel design for simultaneous operation Wi-Fi connectivity (optional)
IPS-12R The IPS-12R Syringe Pump is a highly versatile and precision-engineered device designed to meet the demanding requirements of fluid handling across various industries. With its advanced features and robust construction, the IPS-12R offers unparalleled reliability and performance. Key Features: Wide Range of Syringe Compatibility: The IPS-12R accommodates syringes of different materials, including glass, plastic, and steel. Its adjustable configuration allows for the use of syringes ranging from Hamilton 0.5 �¼l to Monoject 140 ml, providing flexibility for various applications. Precise Flow Control: With a wide flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-12R ensures accurate and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, enables precise control over flow rates, guaranteeing reliable performance even in the most critical tasks. Intuitive Interface: Equipped with a 4.3-inch Resistive Touch TFT LCD screen and powered by user-friendly microcontroller software, the IPS-12R offers an intuitive interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: The IPS-12R features adjustable flow rates even during the pumping process, allowing users to fine-tune parameters as needed for optimal performance. This adaptability ensures versatility in handling diverse fluid handling tasks with precision and control. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: Yes Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 200 mm, Length (L): 170 mm, Height (H): 137 mm Weight: 2.2 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: Wi-Fi connectivity (optional) With its comprehensive features, precise performance, and user-friendly design, the IPS-12R Syringe Pump stands as a reliable solution for fluid handling needs in various industries, ensuring efficiency, accuracy, and control in every operation.
# Product material:carbon steel,stainless steel,aluminum,Glass Fiber Reinforced Plastic #Product surface:Polished,Aluminum Oxidation Spray coated Hot dipped galvanized Galvanize Plain Steel,zinc aluminum magnesium # Product size:1-5/8"x 1" , 1-5/8"x 13/16", 1-5/8"x 1-5/8", 1-5/8"x 2-7/16", 1-5/8"x 3-1/4"(41 x 25 mm, 41 x 21 mm, 41 x 41 mm, 41 x 62 mm, 41 x 82 mm) # Product thickness: 18 GA 17 GA 16 GA 15 GA 14 GA 13 GA 12 GA (1.0 mm,1.2 mm,1.5 mm 1.8 mm 2.0 mm ,2.5 mm) , Others also welcome # Product Length:6' 10' 20' ,1.8 m 2.4 m 2.9 m,3.0 m,5.8 m,6.0 m ,Cut to Length upon request. # Application:Cable management support,Pipe and conduit supports,HVAC Duct Support,Pillar racking system,ceiling grid support bracket,Machine support protection,Solar panel bracket. We can offer # Full line of solid strut channel, slotted strut channel,welded strut channel, hole and patterns are available # Full line of fittings, clamps and strut supports # Wide variety of strut materials and finishes Hot questions Q1: Are you manufacture? A: No,we have partner in Wuxi Langfang city. Q2: How can I request product samples? A: The samples are free but courier charge will be collected. Please send us samples list and courier account number. Q3: How can I request a product catalog? A: The hard copies of catalogs are free but courier charge will be collected.The PDF catalog we can send to you by email or chap App. Q4: What is your payment terms? A: 30% T/T deposit,balance against B/L copy; Irrevocable L/C 100% at sight and irrevocable. Q5: How about the delivery time? A: Accord to your order list and quantity,mostly delivery in 30 days. Q6. Why choose us? 1. We are Songyin Leading supply of Strut Channel and Fittings. 2. Inspected by the Inspection Institution by standard of DIN-ISO-2768 3. 100% QC inspection before Shipment.
1. Raw materials: Our edge banding use high quality PVC and ABS as raw materials. Imported PVC particles comply with environmental protection standards, high purity, without any other materials, and it is also more environmentally friendly. 2. Clear texture: We are now using four color printing process by single extrusion which is more different from normal transfer printing process. It can make clear texture and looks like real wood edge banding. 3.Good abrasion resistance: All of our edge band surfaces have UV, it has high color stability, no easy to fade, anti detergent. So, cleaning agent can be used. 4. Color stable: Chuangxing's edge banding is not easy to fade. It's made of pure raw material, with scientific formula and according to the SGS standard. 5. Accurate size: Chuangxing's edge banding is produced by the imported professional assembly line, with stable quality. It won't affect the processing or use due to the size deviation. 6. Colorful design: Chuangxing matches colors by computer system, we focus on keeping same color after trim, now we have more than 400 colors of copper plates available. 7. Good flexibility: Even on a small plate with bending radius, our edge banding won't have wood grain fracture. 8. Stable expansion: the size stability of our edge banding is good, there won't be any excessive shrinkage or expansion due to a large temperature difference. 9. Small glue-line: Our edge banding is in the shape of internal bending, the hot-melt glue-line is the smallest after sealing, the appearance performance is better, and the moisture resistance will be the largest satisfied while the dust is prevented from entering. 10. The back coating of our edge banding has fluorescent agent, it can glimmer under the currency detector, so it's convenient for customer to identify. 11. Easy to processing: Our back coating is suitable for all kinds of hot-melt, so we can ensure not easy to fall and the bending will be more solid. 12.Good practical performance: Our edge banding can be uniform in thickness, smooth surface, clear texture, base color and print color, without any white appearance while trimming or bending.The bottom glue also has good effect, it has low requirement of sealing temperature, so that sealing can be more convenient and quick.
