Specification: Model No. JAGUAR N250 Number of heating zones 2 Length of heating zones 600mm Body size 1800(L)*1200(W)*1600(H) Outside dimension 2600(L)*1200(W)*1600(H) Weight 700KG Total/running power 11KW/4-6KW Air supply 0.5MPa Preheating method Hot air Preheating power 220V 5KW Control method Press key +PLC (Option: touch screen, PC) Range of temp. control Room temperature---300â?? Preheating time About 10-15mins for setting 150â?? Solder type Lead-free / Sn-Pb Solder pot capacity 220KG Solder pot temperature 300â?? Solder power 380V 6KW Solder temp. control method PID&SSR Wave crest drive power 500W 220V Warm-up time of solder About 120mins for setting 250â?? PCB width 50-250mm Convey speed 0-1800mm/min Convey direction Lâ??R (Râ??L optional) Convey angle 4â??7 º Flux pressure 3-5 bar Flux capacity 3.2L Introduction: 1. Automatic conveying power system and auto synchronous board feeding functions. 2.Tin stove peak uses frequency conversing speed adjustment which can independently control the wave height. 3.Flux sprays system using scanning spray nozzle, Japanese nozzles and rodless pneumatic cylinders and PLC control, accurate and reliable. 4.PLC is used to control the machine, to ensure the reliability and stability of the system. 5.With Remote Infrared Ceramic heating pipe preheating device, heat radiation directly to the circuit board bottom, fast heating and stimulate the full activity of flux. 6.Special alloy transportation chain claws, non-stick tin and ensures the 7.quality of welding PCB board. 8.Tin stove adopts imported high frequency conversion motor independent control, stable performance. 9.Lead-free solder furnace with independent design, environment protection and safety, easy to clean. 10.Preheating system uses three independent temperature control so that ensure the excellent heat preservation, temperature uniformity, temperature difference no more than ±2ºC. 11.Time can be controlled, we can preset switch functions, tin stove can heat within 90 minutes. 12.automatic claw cleaning function ensure the cleanliness of claws. 13.Reasonable design and sensitive fault security alarm system ensure the stable performance and operatorsâ?? safety.
Specification: Model No. JAGUAR N250 Number of heating zones 2 Length of heating zones 600mm Body size 1800(L)*1200(W)*1600(H) Outside dimension 2600(L)*1200(W)*1600(H) Weight 700KG Total/running power 11KW/4-6KW Air supply 0.5MPa Preheating method Hot air Preheating power 220V 5KW Control method Press key +PLC (Option: touch screen, PC) Range of temp. control Room temperature---300â?? Preheating time About 10-15mins for setting 150â?? Solder type Lead-free / Sn-Pb Solder pot capacity 220KG Solder pot temperature 300â?? Solder power 380V 6KW Solder temp. control method PID&SSR Wave crest drive power 500W 220V Warm-up time of solder About 120mins for setting 250â?? PCB width 50-250mm Convey speed 0-1800mm/min Convey direction Lâ??R (Râ??L optional) Convey angle 4â??7 º Flux pressure 3-5 bar Flux capacity 3.2L Introduction: 1. Automatic conveying power system and auto synchronous board feeding functions. 2.Tin stove peak uses frequency conversing speed adjustment which can independently control the wave height. 3.Flux sprays system using scanning spray nozzle, Japanese nozzles and rodless pneumatic cylinders and PLC control, accurate and reliable. 4.PLC is used to control the machine, to ensure the reliability and stability of the system. 5.With Remote Infrared Ceramic heating pipe preheating device, heat radiation directly to the circuit board bottom, fast heating and stimulate the full activity of flux. 6.Special alloy transportation chain claws, non-stick tin and ensures the 7.quality of welding PCB board. 8.Tin stove adopts imported high frequency conversion motor independent control, stable performance. 9.Lead-free solder furnace with independent design, environment protection and safety, easy to clean. 10.Preheating system uses three independent temperature control so that ensure the excellent heat preservation, temperature uniformity, temperature difference no more than ±2ºC. 11.Time can be controlled, we can preset switch functions, tin stove can heat within 90 minutes. 12.automatic claw cleaning function ensure the cleanliness of claws. 13.Reasonable design and sensitive fault security alarm system ensure the stable performance and operatorsâ?? safety
Waste tyre to oil recycling process pyrolysis plant the obtain thing as follows: 45%-55% fuel oil, 10%-15% steel wire, 30%-35% carbon black and 8%-10% flammable gas. You can get diesel from fuel oil by distillation plant.www(dot)wastetireoil(dot)com You can get a very high profit by disposing these wastes, and also it's helpful for improving the local environment, avoid garbage pollution. Waste tyre to oil recycling process pyrolysis plant advantages: 1. One week installation:no need to build foundation thus shorten the construction period, 4th and 5th machine installation period is one month, 6th machine install only need one week. Also easy to move. 2. Service life: Special design inside the reactor to avoid direct www(dot)wastetireoil(dot)com heating, so machine service life prolong to 3-5 times and the heating energy can realize 100% utilization. 3. De-dusting system: "Four in one" de-dusting system can reach European standard, 100% environmental friendly.also no need building the water pool, saving cement, brick cost, saving time. 4. Cooling system: A. 36 meters cooling condenser pipe, inner each pipe have 4 small pipe, cooling performance is very good. B. "Four in one" condensing systems. Waste tyre to oil recycling process pyrolysis plant final product application Fuel oil 1. As the fuel material used in Cement factory, glass factory, ceramic factory, electric power factory, steel making factory, boiler factory, etc. 2. Final diesel come out from our distillation plant and deodorant & decolorant can be used in diesel generator. 3. Used in diesel powered cars, such as vans, truck, tractor, etc. 4. Use as heating oil, industrial and home. Carbon black :www(dot)wastetireoil(dot)com 1. Make it to briquette for fuel. 2. Used in rubber and painting factory after carbon black grinding to 200-4000 mesh. Steel wire:Sell to iron and steel factory (you can take out steel wire from tyre before pyrolysis) Waste gas: 1. Recycled into furnace heating reactor instead of coal/wood/oil/natural gas. 2. Storage the exceed gas to restart the next batch.
FLYING FO-GR Sublimation Offset Ink was designed for offset printing . It was used on all kinds offset printing machine such as single-color , dual-color and multi-color offset printing machine .Be adaptable to the demand for medium-speed or high-speed printing. Product Description Strong Point of FLYING FO-GR Sublimation Offset Ink   :  1) This sublimation ink is safe for the environment and has no harm to skin . It does not belong  to corrosives, totally environmentally-friendly.  2) There is no accumulation of ink on the rolls and the number of machine washings is greatly reduced. Ink granula is less than 5um.  3) All colors are very intense and gives good coverage. Excellent color reproduction, with high printing performance and outcome. Strong dye degree and excellent transfer ability.  4) Have no skinning within 36 hours in ink-box and no crust in 7 days at normal temperature, save 20% ink when printing.  5) Good ink-water balance. Good sun-proof performance and high light fastness. Transferred pattern washable, no peeling, no fading and good weather resistance. Use Method of FLYING FO-GR Sublimation Offset Ink  : 1)  The first part is very simple and resembles exactly to normal process of offset printing . Precisely in the same manner, we offset print the artwork (as mirror image) on the offset paper using sublimation offset ink . 2) Put the printed paper on substrates,such as polyester and nylon fabric . After offset printing, put the printed paper on the surface of the substrates , and with printed  surface facing downwards on the surface of substrates. 3) Put both the paper and substrates on the heat press. And heat ,time and pressure is applied using a heat press. The ink sublimates i.e. converts to  gaseous form and gets deposited "into" the surface, thus transferring image. 4) Finally ,take out paper and fabric from heat press ,the final product will be born . Typical Uses of  FLYING FO-GR Sublimation Offset Ink  : Biking Jerseys, Team Uniforms , Fashion T-Shirts , Garments , Custom Roll Textiles , Flags , Banners , Tradeshow Booths and Displays , Casino Tables , Casino Chips , Surfboards , Skateboards , Snowboards , Skies , Custom Furniture , Interior Design , 3D dye sublimation applications , sublimation aluminum sheet , key rings , display products , plates , mugs , ceramic etc.
FLYING FO-GA Sublimation Offset Ink was designed for offset printing . It was used on all kinds offset printing machine such as single-color , dual-color and multi-color offset printing machine .Be adaptable to the demand for medium-speed or high-speed printing . Product Description  Strong Point of FLYING FO-GA Sublimation Offset Ink   :  1) This sublimation ink is safe for the environment and has no harm to skin . It does not belong  to corrosives, totally    environmentally-friendly.  2) There is no accumulation of ink on the rolls and the number of machine washings is greatly reduced. Ink granula is less than 5um.  3) All colors are very intense and gives good coverage. Excellent color reproduction, with high printing performance and outcome. Strong dye degree and excellent transfer ability.  4) Have no skinning within 24 hours in ink-box and no crust in 3 days at normal temperature, save 20% ink when printing.  5) Good ink-water balance. Good sun-proof performance and high light fastness. Transferred pattern washable, no peeling, no fading and good weather resistance.  Use Method of FLYING FO-GA Sublimation Offset Ink  :  1)  The first part is very simple and resembles exactly to normal process of offset printing . Precisely in the same manner, we offset print the artwork (as mirror image) on the offset paper using sublimation offset ink .  2) Put the printed paper on substrates,such as polyester and nylon fabric .  After offset printing, put the printed paper on the surface of the substrates , and with printed  surface facing downwards on the surface of substrates. 3) Put both the paper and substrates on the heat press.  And heat ,time and pressure is applied using a heat press. The ink sublimates i.e. converts to  gaseous form and gets deposited "into" the surface, thus transferring image. 4) Finally ,take out paper and fabric from heat press ,the final product will be born .  Typical Uses of  FLYING FO-GA Sublimation Offset Ink  : Biking Jerseys, Team Uniforms , Fashion T-Shirts , Garments , Custom Roll Textiles , Flags , Banners , Tradeshow Booths and Displays , Casino Tables , Casino Chips , Surfboards , Skateboards , Snowboards , Skies , Custom Furniture , Interior Design , 3D dye sublimation applications , sublimation aluminum sheet , key rings , display products , plates , mugs , ceramic etc.
FLYING FO-GA Sublimation Offset Ink was designed for offset printing . It was used on all kinds offset printing machine such as single-color , dual-color and multi-color offset printing machine .Be adaptable to the demand for medium-speed or high-speed printing . Product Description  Strong Point of FLYING FO-GA Sublimation Offset Ink   :  1) This sublimation ink is safe for the environment and has no harm to skin . It does not belong  to corrosives, totally    environmentally-friendly.  2) There is no accumulation of ink on the rolls and the number of machine washings is greatly reduced. Ink granula is less than 5um.  3) All colors are very intense and gives good coverage. Excellent color reproduction, with high printing performance and outcome. Strong dye degree and excellent transfer ability.  4) Have no skinning within 24 hours in ink-box and no crust in 3 days at normal temperature, save 20% ink when printing.  5) Good ink-water balance. Good sun-proof performance and high light fastness. Transferred pattern washable, no peeling, no fading and good weather resistance.  Use Method of FLYING FO-GA Sublimation Offset Ink  :  1)  The first part is very simple and resembles exactly to normal process of offset printing . Precisely in the same manner, we offset print the artwork (as mirror image) on the offset paper using sublimation offset ink .  2) Put the printed paper on substrates,such as polyester and nylon fabric .  After offset printing, put the printed paper on the surface of the substrates , and with printed  surface facing downwards on the surface of substrates. 3) Put both the paper and substrates on the heat press.  And heat ,time and pressure is applied using a heat press. The ink sublimates i.e. converts to  gaseous form and gets deposited "into" the surface, thus transferring image. 4) Finally ,take out paper and fabric from heat press ,the final product will be born .  Typical Uses of  FLYING FO-GA Sublimation Offset Ink  : Biking Jerseys, Team Uniforms , Fashion T-Shirts , Garments , Custom Roll Textiles , Flags , Banners , Tradeshow Booths and Displays , Casino Tables , Casino Chips , Surfboards , Skateboards , Snowboards , Skies , Custom Furniture , Interior Design , 3D dye sublimation applications , sublimation aluminum sheet , key rings , display products , plates , mugs , ceramic etc.
FLYING FO-GA Sublimation Offset Ink was designed for offset printing . It was used on all kinds offset printing machine such as single-color , dual-color and multi-color offset printing machine .Be adaptable to the demand for medium-speed or high-speed printing . Product Description  Strong Point of FLYING FO-GA Sublimation Offset Ink   :  1) This sublimation ink is safe for the environment and has no harm to skin . It does not belong  to corrosives, totally    environmentally-friendly.  2) There is no accumulation of ink on the rolls and the number of machine washings is greatly reduced. Ink granula is less than 5um.  3) All colors are very intense and gives good coverage. Excellent color reproduction, with high printing performance and outcome. Strong dye degree and excellent transfer ability.  4) Have no skinning within 24 hours in ink-box and no crust in 3 days at normal temperature, save 20% ink when printing.  5) Good ink-water balance. Good sun-proof performance and high light fastness. Transferred pattern washable, no peeling, no fading and good weather resistance.  Use Method of FLYING FO-GA Sublimation Offset Ink  :  1)  The first part is very simple and resembles exactly to normal process of offset printing . Precisely in the same manner, we offset print the artwork (as mirror image) on the offset paper using sublimation offset ink .  2) Put the printed paper on substrates,such as polyester and nylon fabric .  After offset printing, put the printed paper on the surface of the substrates , and with printed  surface facing downwards on the surface of substrates. 3) Put both the paper and substrates on the heat press.  And heat ,time and pressure is applied using a heat press. The ink sublimates i.e. converts to  gaseous form and gets deposited "into" the surface, thus transferring image. 4) Finally ,take out paper and fabric from heat press ,the final product will be born .  Typical Uses of  FLYING FO-GA Sublimation Offset Ink  : Biking Jerseys, Team Uniforms , Fashion T-Shirts , Garments , Custom Roll Textiles , Flags , Banners , Tradeshow Booths and Displays , Casino Tables , Casino Chips , Surfboards , Skateboards , Snowboards , Skies , Custom Furniture , Interior Design , 3D dye sublimation applications , sublimation aluminum sheet , key rings , display products , plates , mugs , ceramic etc.
FLYING FO-SA Sublimation Offset Ink was designed for offset printing . It was used on all kinds offset printing machine such as single-color , dual-color and multi-color offset printing machine .Be adaptable to the demand for medium-speed or high-speed printing .  Product Description  Strong Point of FLYING FO-SA Sublimation Offset Ink   :  1) This sublimation ink is safe for the environment and has no harm to skin . It does not belong  to corrosives, totally environmentally-friendly.  2) There is no accumulation of ink on the rolls and the number of machine washings is greatly reduced. Ink granula is less than 5um.  3) All colors are very intense and gives good coverage. Excellent color reproduction, with high printing performance and outcome. Strong dye degree and excellent transfer ability.  4) Have no skinning within 72 hours in ink-box and no crust in 15 days at normal temperature, save 20% ink when printing.  5) Good ink-water balance. Good sun-proof performance and high light fastness. Transferred pattern washable, no peeling, no fading and good weather resistance. Use Method of FLYING FO-SA Sublimation Offset Ink  :  1)  The first part is very simple and resembles exactly to normal process of offset printing . Precisely in the same manner, we offset print the artwork (as mirror image) on the offset paper using sublimation offset ink . 2) Put the printed paper on substrates,such as polyester and nylon fabric .  After offset printing, put the printed paper on the surface of the substrates , and with printed  surface facing downwards on the surface of substrates. 3)Put both the paper and substrates on the heat press. And heat ,time and pressure is applied using a heat press. The ink sublimates i.e. converts to  gaseous form and gets deposited "into" the surface, thus transferring image. 4) Finally ,take out paper and fabric from heat press ,the final product will be born . Typical Uses of  FLYING FO-SA Sublimation Offset Ink  : Biking Jerseys, Team Uniforms , Fashion T-Shirts , Garments , Custom Roll Textiles , Flags , Banners , Tradeshow Booths and Displays , Casino Tables , Casino Chips , Surfboards , Skateboards , Snowboards , Skies , Custom Furniture , Interior Design , 3D dye sublimation applications , sublimation aluminum sheet , key rings , display products , plates , mugs , ceramic etc.
FLYING FO-SA Sublimation Offset Ink was designed for offset printing . It was used on all kinds offset printing machine such as single-color , dual-color and multi-color offset printing machine .Be adaptable to the demand for medium-speed or high-speed printing .  Product Description  Strong Point of FLYING FO-SA Sublimation Offset Ink   :  1) This sublimation ink is safe for the environment and has no harm to skin . It does not belong  to corrosives, totally environmentally-friendly.  2) There is no accumulation of ink on the rolls and the number of machine washings is greatly reduced. Ink granula is less than 5um.  3) All colors are very intense and gives good coverage. Excellent color reproduction, with high printing performance and outcome. Strong dye degree and excellent transfer ability.  4) Have no skinning within 72 hours in ink-box and no crust in 15 days at normal temperature, save 20% ink when printing.  5) Good ink-water balance. Good sun-proof performance and high light fastness. Transferred pattern washable, no peeling, no fading and good weather resistance. Use Method of FLYING FO-SA Sublimation Offset Ink  :  1)  The first part is very simple and resembles exactly to normal process of offset printing . Precisely in the same manner, we offset print the artwork (as mirror image) on the offset paper using sublimation offset ink . 2) Put the printed paper on substrates,such as polyester and nylon fabric .  After offset printing, put the printed paper on the surface of the substrates , and with printed  surface facing downwards on the surface of substrates. 3)Put both the paper and substrates on the heat press. And heat ,time and pressure is applied using a heat press. The ink sublimates i.e. converts to  gaseous form and gets deposited "into" the surface, thus transferring image. 4) Finally ,take out paper and fabric from heat press ,the final product will be born . Typical Uses of  FLYING FO-SA Sublimation Offset Ink  : Biking Jerseys, Team Uniforms , Fashion T-Shirts , Garments , Custom Roll Textiles , Flags , Banners , Tradeshow Booths and Displays , Casino Tables , Casino Chips , Surfboards , Skateboards , Snowboards , Skies , Custom Furniture , Interior Design , 3D dye sublimation applications , sublimation aluminum sheet , key rings , display products , plates , mugs , ceramic etc.
FLYING FO-SA Sublimation Offset Ink was designed for offset printing . It was used on all kinds offset printing machine such as single-color , dual-color and multi-color offset printing machine .Be adaptable to the demand for medium-speed or high-speed printing .  Product Description  Strong Point of FLYING FO-SA Sublimation Offset Ink   :  1) This sublimation ink is safe for the environment and has no harm to skin . It does not belong  to corrosives, totally environmentally-friendly.  2) There is no accumulation of ink on the rolls and the number of machine washings is greatly reduced. Ink granula is less than 5um.  3) All colors are very intense and gives good coverage. Excellent color reproduction, with high printing performance and outcome. Strong dye degree and excellent transfer ability.  4) Have no skinning within 72 hours in ink-box and no crust in 15 days at normal temperature, save 20% ink when printing.  5) Good ink-water balance. Good sun-proof performance and high light fastness. Transferred pattern washable, no peeling, no fading and good weather resistance. Use Method of FLYING FO-SA Sublimation Offset Ink  :  1)  The first part is very simple and resembles exactly to normal process of offset printing . Precisely in the same manner, we offset print the artwork (as mirror image) on the offset paper using sublimation offset ink . 2) Put the printed paper on substrates,such as polyester and nylon fabric .  After offset printing, put the printed paper on the surface of the substrates , and with printed  surface facing downwards on the surface of substrates. 3)Put both the paper and substrates on the heat press. And heat ,time and pressure is applied using a heat press. The ink sublimates i.e. converts to  gaseous form and gets deposited "into" the surface, thus transferring image. 4) Finally ,take out paper and fabric from heat press ,the final product will be born . Typical Uses of  FLYING FO-SA Sublimation Offset Ink  : Biking Jerseys, Team Uniforms , Fashion T-Shirts , Garments , Custom Roll Textiles , Flags , Banners , Tradeshow Booths and Displays , Casino Tables , Casino Chips , Surfboards , Skateboards , Snowboards , Skies , Custom Furniture , Interior Design , 3D dye sublimation applications , sublimation aluminum sheet , key rings , display products , plates , mugs , ceramic etc.
FLYING FO-SA Sublimation Offset Ink was designed for offset printing . It was used on all kinds offset printing machine such as single-color , dual-color and multi-color offset printing machine .Be adaptable to the demand for medium-speed or high-speed printing .  Product Description  Strong Point of FLYING FO-SA Sublimation Offset Ink   :  1) This sublimation ink is safe for the environment and has no harm to skin . It does not belong  to corrosives, totally environmentally-friendly.  2) There is no accumulation of ink on the rolls and the number of machine washings is greatly reduced. Ink granula is less than 5um.  3) All colors are very intense and gives good coverage. Excellent color reproduction, with high printing performance and outcome. Strong dye degree and excellent transfer ability.  4) Have no skinning within 72 hours in ink-box and no crust in 15 days at normal temperature, save 20% ink when printing.  5) Good ink-water balance. Good sun-proof performance and high light fastness. Transferred pattern washable, no peeling, no fading and good weather resistance. Use Method of FLYING FO-SA Sublimation Offset Ink  :  1)  The first part is very simple and resembles exactly to normal process of offset printing . Precisely in the same manner, we offset print the artwork (as mirror image) on the offset paper using sublimation offset ink . 2) Put the printed paper on substrates,such as polyester and nylon fabric .  After offset printing, put the printed paper on the surface of the substrates , and with printed  surface facing downwards on the surface of substrates. 3)Put both the paper and substrates on the heat press. And heat ,time and pressure is applied using a heat press. The ink sublimates i.e. converts to  gaseous form and gets deposited "into" the surface, thus transferring image. 4) Finally ,take out paper and fabric from heat press ,the final product will be born . Typical Uses of  FLYING FO-SA Sublimation Offset Ink  : Biking Jerseys, Team Uniforms , Fashion T-Shirts , Garments , Custom Roll Textiles , Flags , Banners , Tradeshow Booths and Displays , Casino Tables , Casino Chips , Surfboards , Skateboards , Snowboards , Skies , Custom Furniture , Interior Design , 3D dye sublimation applications , sublimation aluminum sheet , key rings , display products , plates , mugs , ceramic etc.
FLYING FO-SA Sublimation Offset Ink was designed for offset printing . It was used on all kinds offset printing machine such as single-color , dual-color and multi-color offset printing machine .Be adaptable to the demand for medium-speed or high-speed printing .  Product Description  Strong Point of FLYING FO-SA Sublimation Offset Ink   :  1) This sublimation ink is safe for the environment and has no harm to skin . It does not belong  to corrosives, totally environmentally-friendly.  2) There is no accumulation of ink on the rolls and the number of machine washings is greatly reduced. Ink granula is less than 5um.  3) All colors are very intense and gives good coverage. Excellent color reproduction, with high printing performance and outcome. Strong dye degree and excellent transfer ability.  4) Have no skinning within 72 hours in ink-box and no crust in 15 days at normal temperature, save 20% ink when printing.  5) Good ink-water balance. Good sun-proof performance and high light fastness. Transferred pattern washable, no peeling, no fading and good weather resistance. Use Method of FLYING FO-SA Sublimation Offset Ink  :  1)  The first part is very simple and resembles exactly to normal process of offset printing . Precisely in the same manner, we offset print the artwork (as mirror image) on the offset paper using sublimation offset ink . 2) Put the printed paper on substrates,such as polyester and nylon fabric .  After offset printing, put the printed paper on the surface of the substrates , and with printed  surface facing downwards on the surface of substrates. 3)Put both the paper and substrates on the heat press. And heat ,time and pressure is applied using a heat press. The ink sublimates i.e. converts to  gaseous form and gets deposited "into" the surface, thus transferring image. 4) Finally ,take out paper and fabric from heat press ,the final product will be born . Typical Uses of  FLYING FO-SA Sublimation Offset Ink  : Biking Jerseys, Team Uniforms , Fashion T-Shirts , Garments , Custom Roll Textiles , Flags , Banners , Tradeshow Booths and Displays , Casino Tables , Casino Chips , Surfboards , Skateboards , Snowboards , Skies , Custom Furniture , Interior Design , 3D dye sublimation applications , sublimation aluminum sheet , key rings , display products , plates , mugs , ceramic etc.
FLYING FO-GR Sublimation Offset Ink was designed for offset printing . It was used on all kinds offset printing machine such as single-color , dual-color and multi-color offset printing machine .Be adaptable to the demand for medium-speed or high-speed printing. Product Description Strong Point of FLYING FO-GR Sublimation Offset Ink   :  1) This sublimation ink is safe for the environment and has no harm to skin . It does not belong  to corrosives, totally environmentally-friendly.  2) There is no accumulation of ink on the rolls and the number of machine washings is greatly reduced. Ink granula is less than 5um.  3) All colors are very intense and gives good coverage. Excellent color reproduction, with high printing performance and outcome. Strong dye degree and excellent transfer ability.  4) Have no skinning within 36 hours in ink-box and no crust in 7 days at normal temperature, save 20% ink when printing.  5) Good ink-water balance. Good sun-proof performance and high light fastness. Transferred pattern washable, no peeling, no fading and good weather resistance. Use Method of FLYING FO-GR Sublimation Offset Ink  : 1)  The first part is very simple and resembles exactly to normal process of offset printing . Precisely in the same manner, we offset print the artwork (as mirror image) on the offset paper using sublimation offset ink . 2) Put the printed paper on substrates,such as polyester and nylon fabric . After offset printing, put the printed paper on the surface of the substrates , and with printed  surface facing downwards on the surface of substrates. 3) Put both the paper and substrates on the heat press. And heat ,time and pressure is applied using a heat press. The ink sublimates i.e. converts to  gaseous form and gets deposited "into" the surface, thus transferring image. 4) Finally ,take out paper and fabric from heat press ,the final product will be born . Typical Uses of  FLYING FO-GR Sublimation Offset Ink  : Biking Jerseys, Team Uniforms , Fashion T-Shirts , Garments , Custom Roll Textiles , Flags , Banners , Tradeshow Booths and Displays , Casino Tables , Casino Chips , Surfboards , Skateboards , Snowboards , Skies , Custom Furniture , Interior Design , 3D dye sublimation applications , sublimation aluminum sheet , key rings , display products , plates , mugs , ceramic etc.
FLYING FO-GR Sublimation Offset Ink was designed for offset printing . It was used on all kinds offset printing machine such as single-color , dual-color and multi-color offset printing machine .Be adaptable to the demand for medium-speed or high-speed printing. Product Description Strong Point of FLYING FO-GR Sublimation Offset Ink   :  1) This sublimation ink is safe for the environment and has no harm to skin . It does not belong  to corrosives, totally environmentally-friendly.  2) There is no accumulation of ink on the rolls and the number of machine washings is greatly reduced. Ink granula is less than 5um.  3) All colors are very intense and gives good coverage. Excellent color reproduction, with high printing performance and outcome. Strong dye degree and excellent transfer ability.  4) Have no skinning within 36 hours in ink-box and no crust in 7 days at normal temperature, save 20% ink when printing.  5) Good ink-water balance. Good sun-proof performance and high light fastness. Transferred pattern washable, no peeling, no fading and good weather resistance. Use Method of FLYING FO-GR Sublimation Offset Ink  : 1)  The first part is very simple and resembles exactly to normal process of offset printing . Precisely in the same manner, we offset print the artwork (as mirror image) on the offset paper using sublimation offset ink . 2) Put the printed paper on substrates,such as polyester and nylon fabric . After offset printing, put the printed paper on the surface of the substrates , and with printed  surface facing downwards on the surface of substrates. 3) Put both the paper and substrates on the heat press. And heat ,time and pressure is applied using a heat press. The ink sublimates i.e. converts to  gaseous form and gets deposited "into" the surface, thus transferring image. 4) Finally ,take out paper and fabric from heat press ,the final product will be born . Typical Uses of  FLYING FO-GR Sublimation Offset Ink  : Biking Jerseys, Team Uniforms , Fashion T-Shirts , Garments , Custom Roll Textiles , Flags , Banners , Tradeshow Booths and Displays , Casino Tables , Casino Chips , Surfboards , Skateboards , Snowboards , Skies , Custom Furniture , Interior Design , 3D dye sublimation applications , sublimation aluminum sheet , key rings , display products , plates , mugs , ceramic etc.
FLYING FO-GR Sublimation Offset Ink was designed for offset printing . It was used on all kinds offset printing machine such as single-color , dual-color and multi-color offset printing machine .Be adaptable to the demand for medium-speed or high-speed printing. Product Description Strong Point of FLYING FO-GR Sublimation Offset Ink   :  1) This sublimation ink is safe for the environment and has no harm to skin . It does not belong  to corrosives, totally environmentally-friendly.  2) There is no accumulation of ink on the rolls and the number of machine washings is greatly reduced. Ink granula is less than 5um.  3) All colors are very intense and gives good coverage. Excellent color reproduction, with high printing performance and outcome. Strong dye degree and excellent transfer ability.  4) Have no skinning within 36 hours in ink-box and no crust in 7 days at normal temperature, save 20% ink when printing.  5) Good ink-water balance. Good sun-proof performance and high light fastness. Transferred pattern washable, no peeling, no fading and good weather resistance. Use Method of FLYING FO-GR Sublimation Offset Ink  : 1)  The first part is very simple and resembles exactly to normal process of offset printing . Precisely in the same manner, we offset print the artwork (as mirror image) on the offset paper using sublimation offset ink . 2) Put the printed paper on substrates,such as polyester and nylon fabric . After offset printing, put the printed paper on the surface of the substrates , and with printed  surface facing downwards on the surface of substrates. 3) Put both the paper and substrates on the heat press. And heat ,time and pressure is applied using a heat press. The ink sublimates i.e. converts to  gaseous form and gets deposited "into" the surface, thus transferring image. 4) Finally ,take out paper and fabric from heat press ,the final product will be born . Typical Uses of  FLYING FO-GR Sublimation Offset Ink  : Biking Jerseys, Team Uniforms , Fashion T-Shirts , Garments , Custom Roll Textiles , Flags , Banners , Tradeshow Booths and Displays , Casino Tables , Casino Chips , Surfboards , Skateboards , Snowboards , Skies , Custom Furniture , Interior Design , 3D dye sublimation applications , sublimation aluminum sheet , key rings , display products , plates , mugs , ceramic etc.
FLYING FO-GR Sublimation Offset Ink was designed for offset printing . It was used on all kinds offset printing machine such as single-color , dual-color and multi-color offset printing machine .Be adaptable to the demand for medium-speed or high-speed printing. Product Description Strong Point of FLYING FO-GR Sublimation Offset Ink   :  1) This sublimation ink is safe for the environment and has no harm to skin . It does not belong  to corrosives, totally environmentally-friendly.  2) There is no accumulation of ink on the rolls and the number of machine washings is greatly reduced. Ink granula is less than 5um.  3) All colors are very intense and gives good coverage. Excellent color reproduction, with high printing performance and outcome. Strong dye degree and excellent transfer ability.  4) Have no skinning within 36 hours in ink-box and no crust in 7 days at normal temperature, save 20% ink when printing.  5) Good ink-water balance. Good sun-proof performance and high light fastness. Transferred pattern washable, no peeling, no fading and good weather resistance. Use Method of FLYING FO-GR Sublimation Offset Ink  : 1)  The first part is very simple and resembles exactly to normal process of offset printing . Precisely in the same manner, we offset print the artwork (as mirror image) on the offset paper using sublimation offset ink . 2) Put the printed paper on substrates,such as polyester and nylon fabric . After offset printing, put the printed paper on the surface of the substrates , and with printed  surface facing downwards on the surface of substrates. 3) Put both the paper and substrates on the heat press. And heat ,time and pressure is applied using a heat press. The ink sublimates i.e. converts to  gaseous form and gets deposited "into" the surface, thus transferring image. 4) Finally ,take out paper and fabric from heat press ,the final product will be born . Typical Uses of  FLYING FO-GR Sublimation Offset Ink  : Biking Jerseys, Team Uniforms , Fashion T-Shirts , Garments , Custom Roll Textiles , Flags , Banners , Tradeshow Booths and Displays , Casino Tables , Casino Chips , Surfboards , Skateboards , Snowboards , Skies , Custom Furniture , Interior Design , 3D dye sublimation applications , sublimation aluminum sheet , key rings , display products , plates , mugs , ceramic etc.
Scrap Tires are an ubiquitous by-product of contemporary social and economic society. Our personal mobility is almost entirely dependent on the pneumatic tire, whether in automobiles, buses or even airplanes. The transport and delivery of most goods is also dependent on the pneumatic tire. To recall an old slogan of the American Trucking Association, "If you got it, a truck brought it", and it goes without saying that the truck was riding on pneumatic tires. The Scrap tire derived fuel pyrolysis plant can effectively convert waste tire into fuels, like Oil, Carbon Black, and Hydrocarbon Gas etc. Here, the raw material is either waste tire or waste plastic. Then, the recycleables are heated from the reactor to be able to generate fuels, oil, and gas. 1.Using Scrap tire derived fuel pyrolysis plant available for sale, stick to experience an excellent, eco-friendly & cost-effective solution for tyre recycling. 2.On an average, the entire pyrolysis process may lead to a yield of around 45-52% oil, 30-35% charcoal, and 15% gas. The oil produced is mainly made up of diesel, kerosene, benzene, fuel oil & heavy fuel oil. Hence, the produced oil may be further refined and useful for operating any vehicle. 3.The pyrolysis plant pollution has truly get to be the most problem nowadays. Obviously, scrap tire derived fuel pyrolysis plant give you a meaningful strategy to it while promoting an eco-friendly solution by reduction of the hazards of land pollution due to the waste tire. 4.By converting the waste into energy, Scrap tire derived fuel pyrolysis plant offers an alternative energy source too. Scrap tire derived fuel pyrolysis plant falls beneath the following kinds of industrial projects 1.Waste to energy project 2.Renewable energy project 3.Waste tire and plastic control equipment 4.Petrochemical Fuel Oil The fuel oil is between 45 and 52 percent. This fuel oil does apply in power plant factory, ceramic factory, aluminum factory, glass factory, painting factory, boiler system factory and boiler factory. The proportion found as soon as the recycling is 30 to 35 percent of carbon black. This device works extremely well within the electric cable jacketing, doormat and hose mat, conveyor ban, rubber addictive, automatic spare parts, heat isolation plus more.
Mica powder Mica powder is a non-metallic mineral, containing a variety of ingredients, including the main SiO2, the content is generally around 49%, Al2O3 content of about 30%. Mica powder has good elasticity and toughness. Insulation, high temperature resistance, acid and alkali resistance, corrosion resistance, strong adhesion and other characteristics, is an excellent additive. It is widely used in electrical appliances, welding, rubber, plastics, paper, paint, paint, paint, ceramics, cosmetics, new building materials and other industries, the use of a very wide range. With the development of science and technology, people have opened up a new field of application. Mica powder application 1. coating are Mica powder coating is a kind of new green environmental protection packing, unique two-dimensional sheet barrier, UV shielding, chemical structure stability effectively improve the coating's penetration resistance, weatherability, abrasion resistance and corrosion resistance. Also, excluding any radioactive elements, leading the trend of environmental protection in coating field. It is widely used in building exterior wall coatings, anti-corrosion coatings, powder coatings, high temperature resistant coatings, insulation coatings, waterproof coating, paint, paint, paint and some special coating. 2 cosmetics field Makeup grade mica has unique sheet structure, silky luster and silky texture, the silty cosmetics like silky light and delicate. Natural texture let skin has excellent affinity and crystal beautiful effect, giving cosmetic touch soft, soft luster, good appetency, paste skin force is strong wait for a characteristic, is the cosmetics industry preferred high-grade powder materials. 3 plastics field The plastic mica powder has the characteristics of high thickness ratio, high temperature resistance, acid and alkali resistance, abrasion resistance, etc., and is a kind of natural functional powder filling material. Company select high-quality mica ore, the unique wet grinding and peeling and purification technique, mica lamellae cleavage completely, save the mica unique high diameter thickness ratio structure (diameter to thickness ratio is as high as more than 100), make it in plastic products with prominent enhancement effect, and gives plastic plastic products excellent dimensional stability; the product itself characteristic of high temperature also greatly improve hot plastic deformation thermometer Vicat softening point, applicable to high temperature condition of parts and products, mica and glass fiber compared with smooth product surface, no warping deformation characteristics. Products are widely used in PP, PA, PBT, PET and other plastic modification, plastic masterbatch, engineering application.
Jaw Crusher is also called jaw crasher, which processes materials by adopting the principle of mutual extrusion between jaw plates. It is often used as the first process to crush all kinds of rocks with less than 320MPa compressive strength into medium particle size for one time. Jaw crusher is always used with cone crusher, impact crusher and sand maker to constitute the sandstone production line. Jaw crusher can be divided into PE series and PEX series, of which the PE jaw crusher is used for coarse crushing, and PEX jaw crusher for medium and fine crushing. Usage and Application Fields: 1. Jaw crusher is mainly used for the medium and fine crushing of hard ores and rocks in metallurgy industry, mine industry, chemical industry, cement industry, construction industry, refractory materials industry and ceramic industry and other sectors. 2. It is suitable for crushing all kinds of hard and soft ores with less than 300MPa compressive strength, such as pebble, calcite, granite, quartz, concrete, dolomite, bluestone, iron ore, limestone, iron ore, coal gangue, construction waste, ferrosilicon, basalt, sandstone, ore, glass, cement clinker, etc. Stone Jaw Crusher Parts: Jaw crusher is made of the frame, the eccentric shaft, a big belt pulley, the flywheel, a side guard plate, toggle plate, toggle plate backseat, clearance adjusting screw, a reset spring, a fixed jaw plate and a movable jaw plate, wherein the toggle plate also plays the role of insurance. Advantages of Large and Mini Jaw Crusher 1. Deep crushing cavity, high efficiency and energy saving; 2. Strong bearing capacity, high stability; 3. Advanced technology, long service life; 4. Centralized lubrication system, easy maintenance; 5. Simple structure, convenient maintenance; 6. Large discharging adjustment range, one crusher has multiple usages; 7. Low noise, less dust. Jaw Crusher Price: Jaw crusher is one of the long history production equipment of Fote Machinery, so its technology is very mature, which can effectively control the production cost. We have many types of jaw crushers such as granite jaw crusher, limestone jaw crusher and small jaw crusher for sale. Customers can choose mini jaw crusher or large jaw crusher according to specific demands. Fote Machinery can guarantee the lowest jaw crusher price with the same quality. Welcome new and old customers to visit us!
Properties and advantages of white fused alumina 1, does not affect the color of the processed parts; 2, can be prohibited in the process of using iron powder residue to sand blasting; 3, micro powder grade is very suitable for wet sand blasting and polishing operation; 4, fast processing speed, high quality; 5, the amount of iron oxide is extremely low suitable for the sand blasting operation is strictly prohibited; Physical and chemical index Chemical index Physical index Al2O3 More than 95% Knoop hardness 2000-2200Kg/mm2 Fe2O3 Less than or equal to 0.4% Mohs hardness Nine Na2O Less than or equal to 0.22% Bulk density 1.53-1.99g/cm3 SiO2 Less than or equal to 0.04% True density 3.9-4.9g/cm3 White corundum purpose 1, can be used in all kinds of sand blasting and polishing (Lapping) operation; 2, Boli or acrylic crafts aesthetic feeling of atomization processing; 3, the TV screen in the process of blasting; 4, the silicon wafer cutting; 5, tooth mold cleaning sand blasting; 6, precision casting sand; 7, advanced refractories and other ceramic additives. The removal of 8, electronic parts, core flash, eliminate processing White corundum application field White corundum abrasives are suitable for all kinds of high-end product, process or beautify processing, hardware and other products surface after sand blasting surface clean without any impurities, cleaning trouble. Fine white corundum can be used for polishing. White corundum used as additive in various products. White corundum as a solid and coated with abrasive, wet or dry, or spray sand, suitable for crystal, ultra precision grinding and polishing in electronics industry and making high-grade refractory materials, etc. White corundum is suitable for machining hardened steel, alloy steel, high speed steel, high carbon steel hardness is harder, such as tensile strength of the larger materials. White corundum used as touch media, insulator and precision casting sand, etc. White corundum used for iron artifacts to rust, dirt, scale, increasing the coating, coating adhesion; White corundum used in aluminum workpiece to scale, surface strengthening, finishing effect; White jade for the bronze artifacts to skin inferior smooth effect, glass crystal frosted plastic, engraved designs, inferior smooth effect, special fabrics such as denim fluffy effect of processing and design.
