LUBENZ ULTIMATE HIGH TEMPERATURE CLAY BASED GREASE are high temperature greases, formulated with bentonite clay based thickener and extreme pressure additive system to provide extra protection against wear, rusting and water washout especially in industrial equipment operating under heavy loads and high temperatures. They are available in NLGI grades ranging from 00 to 3 with base oil viscosity of ISO VG 150 & 320. It retains its consistency at high temperatures and provides good storage stability. for more information, please contact us.
LUBENZ FLUX BRAKE FLUID 4 DOT 4 are supreme performance hydraulic brake fluid based on polyethylene glycol ether technology to provide a high level of brake and clutch performance in automotive and commercial vehicles. They are designed to meet or exceed the general requirements of most builders of automotive disc, drum and anti-skid brake systems and clutch systems, used in average to high performance vehicles requiring DOT 3 or DOT 4 level performance. for more information, please contact us.
X DIESEL ENGINE OILS SAE 10W-40 / 15W-40 / 20W-50 / 20W-60 API CJ-4 / CI-4 / CH-4 / CG-4 / CF-4 (MINERAL BASED ENGINE OIL) LUBENZ GLORIA PLUS 15W40 CJ-4 is extra high performance diesel engine oil formulated with highly refined base stocks and advanced technology additives to provide reliable engine performance in the latest emission designs, including those with Exhaust Gas Recirculation (EGR) systems and after treatment systems with Diesel Particulate Filters (DPF) and Diesel Oxidation Catalyst (DOC), as well as satisfying the needs of older engines. It may be used in naturally aspirated and turbocharged diesel & petrol engines and On & Off highway applications, providing excellent protection even under the most strenuous conditions. for more information, please contact us.
TURBO PLUS DIESEL SAE 10W-30 / 10W-40 / 15W-40 / 20W-50 API CJ-4, CI-4 PLUS, CI-4, CH-4, CG-4, CF-4, CI-4/SM, CI-4/SL, CH-4/SJ (MINERAL BASED DIESEL OIL) LUBENZ SILVER HDEO 5000 series are monograde diesel engine oils formulated with high quality base stocks and selected additives to ensure optimum performance and protection for diesel engines requiring an API CF-4/CF-2 specification. Suitable for heavy duty, high output diesel engines where monograde oils are specified. It provides excellent protection in engines, against high temperature piston deposits, wear, corrosion and foaming under severe operating conditions. fior more information, please contact us.
MAX POWER SAE 10W-40 / 10W-60 / 20W-50 / 20W-60 API SN, SM/CF, SL/CF, SL) MINERAL BASED) LUBENZ PREMIUM PEO SAE SF/CD series are monograde crankcase lubricants formulated with high quality base stocks and balanced additive system to provide high level of engine protection and performance. It works harder than other conventional motor oils by continuously preventing dirt and sludge build-up and reduces engine noise. This product meets the requirements of most mixed fleet applications and is suitable for general service and commercial engines. for more information, please contact us.
Lubenz Extra Pixle Fully Synthetic Engine Oil API SP is a premium quality, full-synthetic automotive engine oil designed to provide maximum engine protection for both turbocharged gasoline direct injection, conventional gasoline-fueled and flex-fueled passenger cars and light trucks under all operating conditions. It is particularly recommended for vehicles operating at extreme temperatures or under severe driving conditions, such as towing heavy loads.LUBENZ EXTRA PIXLE FULLY SYNTHETIC ENGINE OIL API SP exceeds new car warranty requirements as defined by ILSAC GF-6. It is uniquely formulated to help combat low speed pre-ignition (LSPI) in turbocharged gasoline direct injection engines. It meets or exceeds Resource Conserving requirements for fuel economy improvement, emission system and turbocharger protection, and protection of engines operating on ethanol-containing fuels up to E85. It is backward serviceable for use where API SN or earlier S category engine oils are recommended. For more information, don't hesitate to contact us.
SUPER SYNTHECH SAE 10W-40 / 5W-30 / 5W-40 / 5W-50 API SN, SM, SL/CF LUBENZ INFINITY SJ series are designed with high quality base stocks and advanced technology additive system to provide high level of protection and performance. It works harder than other conventional motor oils by continuously preventing dirt and sludge build-up and reduces engine noise. Packaging 1L, 208L, 20L, 25L, 4L, 5L, IBC for more info contact us.
GREEN HYBRID SAE 0W-20 / 5W-20 / 5W-30 API SN / SM (FULLY SYNTHETIC ENGINE OIL) LUBENZ PRO TECH SN series are advanced technology engine oils blended in high performance fully synthetic (PAO â?? polyalphaolefin) basestocks fortified with precisely balanced additive system, specifically to help deliver high level of performance and outstanding protection during long service intervals. It is suitable for the latest downsized engines equipped with stop & start technologies and hybrid engines requiring an API SN specification, where very high viscosity index oils are preferred to provide longer oil drain intervals in modern engines. It provides maximum protection in engines operating under severe conditions, including high-performance turbo-charged, supercharged gasoline and certain diesel multi-valve fuel injected systems. Packaging 1L, 208L, 20L, 25L, 4L, 5L, IBC for more information, contact us.
X TURBO PLUS SAE 0W-30 / 10W-40 / 10W-60 API CI-4-SL (FULLY SYNTHETIC ENGINE OIL) LUBENZ GLORIA CI-4/SL series is high performance diesel engine oil formulated with highly refined base stocks and advanced technology additives to provide reliable performance in the latest emission designs, including those with EGR systems, as well as satisfying the needs of older engines. It may be used in naturally aspirated and turbocharged diesel and petrol engines, providing excellent protection even under the most strenuous conditions. Packaging 1L, 208L, 20L, 25L, 4L, 5L, IBC for more information, contact us.
LUBENZ ROXX SPECIAL GEARLUBE of lubricants are supreme performance industrial gear oils, formulated with high quality base stocks fortified with sulfur-phosphorus additive system. They are designed to work efficiently in all types of enclosed gear drives with circulation or splash lubrication systems, where outstanding extreme pressure characteristics (EP/AW properties), extremely high load carrying capability and excellent demulsifying properties are desired. Moreover they offer extremely high protection against micropitting, wear and corrosion in enclosed gears and all types of oil lubricated bearings. Suitable for use in large & small spur bevel, spiral, helical & herringbone gears. for more information, please contact us.
LUBENZ GOLDEN TORQUE CONVERTOR HF-32 is a high performance dual clutch transmission fluid, formulated with high quality fully synthetic base stocks and advanced additive technology with consistent shear stability for maintaining optimum film thickness for reliable protection of gears and bearings, also providing an outstanding improvement in friction durability enabling longer drain intervals under a broad range of driving conditions, temperatures and transmissions. It is designed specifically to be used as a service-fill DCT transmission fluid for European, Asian and American vehicles equipped with wet & dry dual clutch transmissions. Outstanding torque retention to provide smooth shift feel without NVH (Noise, Vibration and Harshness) concerns and all-around lubrication protection of the transmission components to help extend transmission service life with a smooth driving experience. It provides exceptional copper corrosion protection for better hardware durability, excellent oxidation control to provide longer fluid life and good seal compatibility for better leakage prevention. for more information, please contact us.
LUBENZ MONOX MARINE MULTI SYSTEM series is a range of high performance marine multipurpose system oils formulated with high quality paraffinic base stocks and balanced additive system to ensure optimum performance and excellent protection in low speed, high output cross head marine engines, operating on residual fuels. It has sufficient alkalinity to neutralize any strong acidic combustion products which may enter into the crankcase and it demonstrates high load carrying ability under severe operating conditions. for more information, please contact us.
LUBENZ SOLO TRANSFORMER OIL BS and GB are severely refined hydro-cracked / hydro-treated virgin inhibited insulating oils with highest degree of purity and stability. It is manufactured from judiciously selected blend of latest technology feed stocks, which is highly suitable for all grades of Power & distribution Transformers, Circuit Breakers, Oil filled switches and X-ray equipment. for more imformation, please contact us.
LUBENZ SUPER NANO HIGH TEMP CALCIUM SULPHONATE COMPLEX GREASE, made of the NEW GENERATION calcium sulfonate complex soap designed by LUBENZ. This new soap has enhanced properties in terms of water resistance, load capacity, thermal resistance, anticorrosion properties while keeping a very high level of pumpability and ability to lubricate well in case of high speeds. for more information, please contact us.
Desiccated coconut, sometimes referred to as Coconut Powder, is a dehydrated form of white coconut meat from freshly selected mature coconut kernels. It is prepared from substantially sound white kernel obtained from the whole nut of coconut (Cocos nucifera). Desiccated coconuts have to be processed in an appropriate manner, undergoing operations such as de-husking (the removal of the husk, leaving the shell intact), hatcheting (the removal of the shell), paring (the removal of the brown skin around the kernel), washing, comminuting, drying (to humidity level below 3%) and sifting. They can be produced without oil extraction or with partial oil extraction by appropriate physical means. Preservatives are allowed for use in production of desiccated coconuts and the most common in practice is sulphur dioxide. Also citric acid is allowed for use as the antioxidant. Table 1: Combined Nomenclature code for desiccated coconuts Number Product 080111 Coconuts, desiccated Product Specification Quality For detailed standard quality requirements please refer to Codex Alimentarius Standard for Desiccated Coconut The basic quality requirements for desiccated coconuts are: Colour: natural white to light creamy Texture: free-flowing and free from yellow specks Flavour: distinctive coconut flavour without off-flavours due to deterioration or absorption of extraneous substances. Odour: The odour shall be characteristic of the product, shall not be mouldy, cheesy, smoky, fermented or rancid, and shall not possess any undesirable odour. Oil content: According to the oil content, desiccated coconuts are in trade practice commonly divided into 2 categories: 1. High fat Desiccated Coconut (sometimes referred as 'full fat') with equal or more than 60% m/m of oil. It is dehydrated form of white coconut meat from freshly selected mature kernels. 2. Low fat Desiccated Coconut with less than 60% m/m of oil. It is a dehydrated form of white coconut meat after extraction of the Coconut milk. The fat content of this product can vary but is usually in the range of 45% - 55%. Additional quality requirements
Desiccated coconut, sometimes referred to as Coconut Powder, is a dehydrated form of white coconut meat from freshly selected mature coconut kernels. It is prepared from substantially sound white kernel obtained from the whole nut of coconut (Cocos nucifera). Desiccated coconuts have to be processed in an appropriate manner, undergoing operations such as de-husking (the removal of the husk, leaving the shell intact), hatcheting (the removal of the shell), paring (the removal of the brown skin around the kernel), washing, comminuting, drying (to humidity level below 3%) and sifting. They can be produced without oil extraction or with partial oil extraction by appropriate physical means. Preservatives are allowed for use in production of desiccated coconuts and the most common in practice is sulphur dioxide. Also citric acid is allowed for use as the antioxidant. Table 1: Combined Nomenclature code for desiccated coconuts Number Product 080111 Coconuts, desiccated Product Specification Quality For detailed standard quality requirements please refer to Codex Alimentarius Standard for Desiccated Coconut The basic quality requirements for desiccated coconuts are: Colour: natural white to light creamy Texture: free-flowing and free from yellow specks Flavour: distinctive coconut flavour without off-flavours due to deterioration or absorption of extraneous substances. Odour: The odour shall be characteristic of the product, shall not be mouldy, cheesy, smoky, fermented or rancid, and shall not possess any undesirable odour. Oil content: According to the oil content, desiccated coconuts are in trade practice commonly divided into 2 categories: 1. High fat Desiccated Coconut (sometimes referred as 'full fat') with equal or more than 60% m/m of oil. It is dehydrated form of white coconut meat from freshly selected mature kernels. 2. Low fat Desiccated Coconut with less than 60% m/m of oil. It is a dehydrated form of white coconut meat after extraction of the Coconut milk. The fat content of this product can vary but is usually in the range of 45% - 55%. Additional quality requirements
Desiccated coconut, sometimes referred to as Coconut Powder, is a dehydrated form of white coconut meat from freshly selected mature coconut kernels. It is prepared from substantially sound white kernel obtained from the whole nut of coconut (Cocos nucifera). Desiccated coconuts have to be processed in an appropriate manner, undergoing operations such as de-husking (the removal of the husk, leaving the shell intact), hatcheting (the removal of the shell), paring (the removal of the brown skin around the kernel), washing, comminuting, drying (to humidity level below 3%) and sifting. They can be produced without oil extraction or with partial oil extraction by appropriate physical means. Preservatives are allowed for use in production of desiccated coconuts and the most common in practice is sulphur dioxide. Also citric acid is allowed for use as the antioxidant. Table 1: Combined Nomenclature code for desiccated coconuts Number Product 080111 Coconuts, desiccated Product Specification Quality For detailed standard quality requirements please refer to Codex Alimentarius Standard for Desiccated Coconut The basic quality requirements for desiccated coconuts are: Colour: natural white to light creamy Texture: free-flowing and free from yellow specks Flavour: distinctive coconut flavour without off-flavours due to deterioration or absorption of extraneous substances. Odour: The odour shall be characteristic of the product, shall not be mouldy, cheesy, smoky, fermented or rancid, and shall not possess any undesirable odour. Oil content: According to the oil content, desiccated coconuts are in trade practice commonly divided into 2 categories: 1. High fat Desiccated Coconut (sometimes referred as 'full fat') with equal or more than 60% m/m of oil. It is dehydrated form of white coconut meat from freshly selected mature kernels. 2. Low fat Desiccated Coconut with less than 60% m/m of oil. It is a dehydrated form of white coconut meat after extraction of the Coconut milk. The fat content of this product can vary but is usually in the range of 45% - 55%. Additional quality requirements
Capsicum oleoresin is an oily organic resin derived from the fruit of plants in the Capsicum genus, such as chilli peppers. When the plants are finely ground, capsicum oleoresin is formed after the extraction process of capsaicin using oragnic solvents such as ethanol. It is commonly used as a culinary spice.