1.Water soluble laundry bags. 2.Dissolvable completely. 3.Infection control prevention. 4.Protection to labour and staffs. Water soluble medical disposal bags for infection control including water soluble laundry bag and medical instrument disposal bag are mainly used to collect the contaminated medical instruments, articles, patient bed sheets, linens and treatment appliances in hospitals and nursing homes. After sealing up the disposal bags, the contents inside the bag do not expose to oustside environment during the whole process of conveying, washing, disinfection and drying. The water soluble bag can dissolve completely during washing and disinfection process without any polluting residual . Benefits: ----avoid direct contact between the contaminated content inside the bag and the operator until the washing and drying cycle is completed, minimizing cross-infection and germs spread; ---- avoid contaminated medical waste to be generated as the disposal bags completely dissolve in water, eliminating the traditional treatment by incineration or burying and reducing the treatment cost.; ---- greatly improve the hygiene of working environment, reduce working intension and enhance the labor protection. Standard specifications: 1. 660mm 840mm (thickness: 20 /25 /28 /30 ) 2. 710mm 990mm (thickness: 20 /25 /28 /30 ) 3. 914mm 990mm (thickness: 20 /25 /28 /30 ) Type of bags: Type c: dissolving temp.: above 15 degree celsius, Type w: dissolving temp.: above 25 degree celsius, Type m: dissolving temp.: above 45 degree celsius, Type h: dissolving temp.: above 65 degree celsius, Type s: dissolving temp.: above 85 degree celsius. Colour: Natural, red, blue, yellow and white. Packaging: 25 bags per roll / 25 bags per pack Multi-colors and specifications are available upon the request of the clients.
1.Water soluble laundry bags. 2.Dissolvable completely. 3.Infection control prevention. 4.Protection to labour and staffs. Water soluble medical disposal bags for infection control including water soluble laundry bag and medical instrument disposal bag are mainly used to collect the contaminated medical instruments, articles, patient bed sheets, linens and treatment appliances in hospitals and nursing homes. After sealing up the disposal bags, the contents inside the bag do not expose to oustside environment during the whole process of conveying, washing, disinfection and drying. The water soluble bag can dissolve completely during washing and disinfection process without any polluting residual . Benefits: ----avoid direct contact between the contaminated content inside the bag and the operator until the washing and drying cycle is completed, minimizing cross-infection and germs spread; ---- avoid contaminated medical waste to be generated as the disposal bags completely dissolve in water, eliminating the traditional treatment by incineration or burying and reducing the treatment cost.; ---- greatly improve the hygiene of working environment, reduce working intension and enhance the labor protection. Standard specifications: 1. 660mm 840mm (thickness: 20îm /25m /28m /30m) 2. 710mm 990mm (thickness: 20îm /25m/28m /30m) 3. 914mm 990mm (thickness: 20îm /25m/28m /30m) Type of bags: Type c: dissolving temp.: above 15 degree celsius, Type w: dissolving temp.: above 25 degree celsius, Type m: dissolving temp.: above 45 degree celsius, Type h: dissolving temp.: above 65 degree celsius, Type s: dissolving temp.: above 85 degree celsius. Colour: Natural, red, blue, yellow and white. Packaging: 25 bags per roll / 25 bags per pack Multi-colors and specifications are available upon the request of the clients.
Metal fence sharp blades razor and bto-22 razor barbed wire from china Â?¢razor barbed wire details Place of origin: hebei, china (mainland) Model number: bto-10, bto-12, bto-18, bto-22, bto-28, bto-30, cbt-60, cbt-65 Material: hot dip galvanized steel wire, stainless steel plate, hot dip galvanized iron wire Surface treatment: galvanized/pvc coated Type: barbed wire mesh Razor type: single coil/cross type Product name: razor barbed wire Blade thickness: 0.5mm Color: blue, green, yellow and more Wire diameter: 2.5mm Packing: water-proof paper inside and woven bag or carton outsideâ?¢packaging & delivery Packaging details Hot dipped galvanized razor barbed wire: 1. Inner packing with waterproof paper, outside with woven bag 2. With woven bag 3. Carton or pallet As per customers' request A container can hold 22 tonsâ?¢faq Q1: are you a direct manufacturer? A1: yes, we have specialized in razor wire for about 10 years. Q2: how can i trust your company? A2: we are iso 9001 certification company, and we support payment terms: l/c, t/t to ensure your safety. Q3: whatâ??s the moq of the razor barbed wire? A3: 1 ton. Q4: do you have other products? A4: yes, our factory also produces wall spike, welded mesh, galfan gabion, barbed wire, razor wire, chain link fence, wire mesh fence and more.
Description: 1. 304#stainless steel and acrylic as the materials, with screw for install; 2. Any fonts, different colors and sizes and styles are according to customers' requirements; 3. Inner high quality waterproof led strip( with ce & rohs 4. Long lifespan over 50000 hours guarantee, safe voltage -dc12v& 5. High light led inside, surface luminance can be high to 500-1500mcd (different colors); 6. Uniformity with the unique light absorption layer for transmission of light, refraction; 7. Ametabolic, waterproof, fireproof, corrosion resistance, no rust, no fade; 8. Wide operating temperature range under dry or humid conditions cold to - 30 degrees and hot to 60 degrees; 9. Various lamp and acrylic colors: white, blue, red, yellow, orange...(rgb color led letters with programmable controller for option); 10. Environmental protection: have no light pollution or chemical pollution; 11. Energy-saving--led as light source allows greatly reduce the power consumption. Detail of led letters Main material:front: grade 201/304/316 stainless steel, high quality acrylic/plexiglass Side: grade 201/304/316 stainless steel, high quality acrylic/plexiglass Inside: waterproof led modules Back: pvc/aluminum composite/galvanized sheet/stainless steel Dimension:customized design Color:customized from pantone color by spray-painted, powder coat etc. Transformer:output: 12v Input: 110v-240v Illuminate:high bright light Light source:led modules/exposed led/led strips Warranty:3 years for led, 10 years for lettering Oem service:accepted Average lifetime: 100000hrs Certification:ccc, ce, ul, rohs Application:shops/hospital/companies/hotels/restaurants/.
Razor barbed wire details: Place of origin: hebei, china (mainland) Model numbers: bto-10, bto-12, bto-18, bto-22, bto-28, bto-30, cbt-60, cbt-65 Material: hot-dipped galvanized steel wire, stainless steel plate, hot-dipped galvanized iron wire Surface treatment: galvanized/pvc-coated Type: barbed wire mesh Razor type: single coil/cross type Product name: razor barbed wire Blade thickness: 0.5mm Colors: blue, green, yellow Wire diameter: 2.5mm Packing: waterproof paper inside and woven bag or carton outside Â?¢ packing and delivery: Packing details: Hot-dipped galvanized razor barbed wire: 1. Inner packing with waterproof paper, outside with woven bag 2. With woven bag 3. Carton or pallet As per customer's requests A container can hold 22 tons Â?¢faq: Q1: are you direct manufacturer? A1: yes, we have specialized in razor wire for about 10 years Q2: how can i trust your company? A2: we are iso 9001 certification company and we support payment terms: l/c, t/t to ensure your safety Q3: what is the minimum order quantity of the razor barbed wire? A3: 1 ton Q4: do you have other products? A4: yes, our factory also produces wall spike, welded mesh, galfan gabion, barbed wire, razor wire, chain link fence, wire mesh fence.
1 Thickness: 0.2-1.4mm 2 Width: 600-1400mm 3 Standard: JIS G3312,Inner diameter: 508mm&610mm, Coil Weight: 3-8T 4 Steel Grade: CGCC, DX51D 5 Plate: hot dipped galvanized plate or cold rolled steel plate 6 Categories of paint: polyester, silicon modified polyester(SMP), Fluor polymer paint&PVDF 7 Painting thickness: 25+/-5 microns on top side and 7+/-2 microns on back side 8 Color: white, red, blue or customized as per RAL color card. 9 Packing: Standard export packing, 4 eye bands and 4 circumferential bands in steel, galvanized metal fluted rings on inner and outer edges, galvanized metal and waterproof paper wall protection disk, galvanized metal and waterproof paper around circumference and bore protection. 10 With or without protective film on the top side of color coated sheet or coil. 11 Applications: buildings, vehicles, ships, mechanical and electrical equipment and electrical household appliance 12 Cutting and slitting can be requested as customer's designation Linyi Qichen Metallic Material Co., Ltd. is a professional factory of color coated steel coil , pre-painted steel coil ,pre-coated metal ,PVC coated steel roll ,embossed door panel ,etc. We have fifteen years experience in this field with more than 80 employees. Our company is equipped with international advanced level color coating production lines to produce Color coated steel coil 160 thousand tons per year. Therefore, we can easily meet your requirements. Thanks to our powerful distribution network, our products are popular with customers in many countries in the world, and are favorably appraised by clients. We pursue the management tenet of "Quality is superior, Service is supreme, Reputation is first", and will sincerely create and share success with all clients. To learn more about what we can do for you, contact us at any time. We look forward to establishing a good and long-term business relationship with you. -
Megaphoton 50w round shape full spectrum led grow lighting for indoor using. 1, Product Data 1), Model No.: ML-TD50W 2), Power: 50w 3), Voltage: 100-240V 4), Frequency: 50/60Hz 5), Efficiency: 2.2umol/J 6), Flux: 110umol/s 7), PF: >0.95 8), Lifetime : 50,000hrs 9), Item Dimension: 330*30mm (13*1.2 inch) 10), LED Chip: Taiwan Epileds Chip 11), LED Q'ty: 250pcs, 12), Spectrum: Red: 660-665nm, 620-630nm, Blue: 450-460nm, White: 6500K, UV: 390-395nm, IR: 730-735nm 13), N.W.: 1.7lbs/765g G.W.: 2.1lbs/957g 14), Packing Dimension: 14.3''x13.4''x1.8''/ 362*340*45mm 15), Shell Material: ABS with Coating 16), Covering Area: Max. 4x4ft at 3ft height 17), Suggested Distance: 1-3ft 18), Suggested Work Time: 10-16 hours per day 19), Working Temperature: -20-50 2, Application For Hydroponics 3, Company introduction Megaphoton is a horticultural lighting manufacturer in China, who is professional in developing and producing these items, such as 600W/1000W HID/HPS ballst & Lighting and Led grow lighting as well. Passed UL,CUL, FCC, CE, RoSH and ISO etc. We have been in this field in more than 10 years. You may go to our website to check more details or contact Senior Sales: Jair
100 Roll/Rolls (Min. Order) Supply Ability:1000000000000000 Roll/Rolls per Month Color:beige, pink, sky blue, black and so on Width:25/50/75/100mm Length:4.5m Sample:Available OEM/ODM packing:available certificates:ISO/CE/FDA material:Cotton Packaging Details Elastic Adhesive Bandage Package:each roll in one polybag, inner box, outer carton. Package can be customized to your demand. Also could Printing inner box according to Customers requirements. Delivery Time 15DAYS Specifications Elastic Adhesive Bandage 1.Supper high tensile strength; 2.Zinc oxide, 3.Latex free. 4.sample available Benefits: 1. As a manufacturer, we can offer a competitive price. 2. Low production cost: Our factory near to the fabric materials and printing industries. 3. OEM: Colors, sizes, pattern, logo and package can be customized. 4. Advantages of bandages: Soft and comfortable cotton fabric Stable and reliable cohesiveness Porous and breathable Optional colors. Features: 1. High quality elastic cotton substrate 2. Latex-free, hypoallergenic 3. Zinc oxide adhesive, skin friendly 4. High elasticity and tensile stength 5. Hand tearable, no scissors needed 6. Soft and comfortable 7. Leaves no residue on body parts 8. Provide moderate to maximum compression 9. Stable and durable cohesiveness 10. No pins or clips needed 11. Light weight,porous,water resistant,will not loose by sweat or water 12.CE,ISO,FDA approved Applications: 1.Dressing fixed special positions; 2.After burn compression bandaging; 3.Varicose veins of lower extremity bandaging; 4.Splint fixation; 5.Fixed joint protection; 6.Veterinary bandaging and grooming. -
100000 Roll/Rolls per Day Color : white/pink/blue/black Size : 2.5cm/5cm/7.5cm/10cm/15cmX4.5m Material :Cotton 25mm :48rolls/box,288rolls/ctn 38mm:32rolls/box,192rolls/ctn 50mm:24rolls/box,144rolls/ctn 75mm:16rolls/box,96rolls/ctn Specifications Light Elastic Adhesive Bandage,light EAB 1,Supper high tensile strength; 2,Cut edge. 3,Zinc oxide Latex free. 4,FDA CE ISO 1. Adheres to iteself,hand tear 2. Non-sticky to hair or skin 3. Provide controlled compression Features: 1. Adheres to itself,no pins or clips needed; 2. Non-sticky to hair or skin, no residue leaves on body upon removal; 3. Nonwoven Material, hand tear 4. Length and width can be made as per request Benefits: 1. Wrap will not slip, no need for frequent readjustment; 2. Light weight,porous, allow skin to breath and comfortable to users; 3. Preotects primary dressings; 4. Provide controlled compression; 5. Soft ,strong fabric; 6. Waterproof, will not loose by sweat or water. Use For: 1. Securing pads and dressings; 2. Protective bandaging; 3. Hold IV sets in place; 4. Pressure bandage to promote circulation and healing' 5. Sprains and strains; 6. Compression bandage for hemostasis,varicosity,edema control; 7. Partial immobilization; 8. Post-operatively leg wrap. -
Recycling raw material china mattress plastic film protection packing Material Pvc plastic (polyvinyl chloride) Thickness 0.05-0.12mm pvc sheet rolls Width 1000mm-2450mm Hardness 22-60phr(hardness) Length 28kg/ 33kg/ 40kg per roll/ customize Color Crystal/ blue/ customize Package Craft paper+clear pvc film(customize) Moq 1000kg(each specification) Test standard Can meet the standard of sgs, en-71, reach, rosh, etc. Payment term 30% deposit, balance against the copy of bl Delivery day 7-15 days after receiving the deposit Application 1.Used in folding boxes, mattress package, all kinds of bags, umbrella, raincoat, inflatable toy, packaging etc. 2.Can be printing. 3.Via cutting into small sheet as the book binding cover 4.Others Characteristics 1. High transparency, bright surface luminance. 2. Smooth surface, uniform thickness. 3. Few hydrological veins, few crystal points. 4. No smell and non-toxic. 5. Anti-cold 6. Can easily be thermoformed, printed, and folded 7. All colors transparency The material of the products is with powder when produce, the powder can help to avoid stickness for its application requirement. But the powder will effect its transparency, more powder less stickness, less transparency, vice versa. The powder can be custom or requested.
Functions & Features: 1) Convertible base, Independent alarm / Invisible wire / central control types for your options. 2) LED on base red / blue / green color for your options. 3) Independent alarm stand DA1880B is compatible with ES58 series sensors; Non alarm stand DP1180 (Invisible wire type) is compatible with ES508C / ES532 sensors (can work together with PB9378 recoilers); Non alarm stand DA1880 can work with central control alarm units, or work with ES545B4V super sensor (with independent alarm function). 4) Provide charging output plug with. Max charging current 2A. 5) Independent alarm stand DA1880B has many alarm functions. Alarm can be triggered when: DA1880B stand is tampered / sensor is disconnected / charging cable is cut or taken out. 6) Stand color: white / black / silver / gold. 7) Mounting to table top / wall surface by 3M adhesive tape. 8) Suitable for merchandise displays of mobile phone or small-sized electronic products. Main Parameters: 1) Stand size: 6.2Cm diameter. Average height (intermediate value) 5.3Cm. 2) Main material: ABS. 3) Alarm volume for DA1880B alarm stand: â?¥100DB. 4) Max output charging current: 2A. 5) Battery standby time (for the rechargeable lithium battery inside DA1880B): 7 days (if no external power supply) 6) Code modification function: yes. 7) Low battery indication: yes. 8) External power on / off indication: yes. 9) Display angel: fixed. 10) Power input via: USB plug, 1 meter cable Optional Accessories for DA1880B: * Power adapter: 5V/A2-USB / 5V/2AX6USB power adapter * Charging cable types: Micro USB, Apple, Type-C * DP1151 / DP1161 apple clamp (clamp for mobile phone / tablet) * AS3X series IR remote keys
Functions & Features: 1) Convertible base, Independent alarm / Invisible wire / central control types for your options. 2) LED on base â?? red / blue / green color for your options. 3) Independent alarm stand DA1880B is compatible with ES58 series sensors; Non alarm stand DP1180 (Invisible wire type) is compatible with ES508C / ES532 sensors (can work together with PB9378 recoilers); Non alarm stand DA1880 can work with central control alarm units, or work with ES545B4V super sensor (with independent alarm function). 4) Provide charging output plug with. Max charging current 2A. 5) Independent alarm stand DA1880B has many alarm functions. Alarm can be triggered when: DA1880B stand is tampered / sensor is disconnected / charging cable is cut or taken out. 6) Stand color: white / black / silver / gold. 7) Mounting to table top / wall surface by 3M adhesive tape. 8) Suitable for merchandise displays of mobile phone or small-sized electronic products. Main Parameters: 1) Stand size: 6.2Cm diameter. Average height (intermediate value) 5.3Cm. 2) Main material: ABS. 3) Alarm volume for DA1880B alarm stand: â?¥100DB. 4) Max output charging current: 2A. 5) Battery standby time (for the rechargeable lithium battery inside DA1880B): 7 days (if no external power supply) 6) Code modification function: yes. 7) Low battery indication: yes. 8) External power on / off indication: yes. 9) Display angel: fixed. 10) Power input via: USB plug, 1 meter cable Optional Accessories for DA1880B: * Power adapter: 5V/A2-USB / 5V/2AX6USB power adapter * Charging cable types: Micro USB, Apple, Type-C * DP1151 / DP1161 apple clamp (clamp for mobile phone / tablet) * AS3X series IR remote keys
Functions & features: 1) optional metal mounting base; specially designed separation way for stand & metal mounting base; mounting to table top / wall surface by 3m adhesive tape / screws. 2) led on base red / blue / green color for your options. 3) independent alarm stand da1852b is compatible with es548c sensor; Non alarm stand da1852 is compatible with es548b4v super sensor (with independent alarm function); Non alarm stand da1852 can work with es548c sensor & central control alarm units. 4) 90or 180adjustable display angle for sensor head. 5) can indicate alarm location. 6) provide charging output max charging current 2a. 7) da1852b has many alarm functions. Alarm can be triggered when: Bottom base is tampered / sensor is disconnected / charging cable is cut or taken out. 8) stand color: white / black / silver / gold. 9) suitable for merchandise displays of mobile phone or small-sized electronic products. Main parameters: 1) stand shape & size: oval shaped stand: 6.3 x 4.9 x 7 cm (intermediate value). 2) main material for the stand: abs. Material for metal mounting base: aluminum. 3) alarm volume for da1852 alarm stand: â?¥100db 4) max output charging current: 2a. 5) battery standby time (for the rechargeable lithium battery inside da1852b): 7 days (if no external power supply) 6) code modification function: yes. 7) low battery indication: yes. 8) external power on / off indication: yes. 9) display angel: adjustable. 10) power input via: usb plug, 1 meter cable Optional accessories for da1852b: * power adapter: 5v/a2-usb / 5v/2ax6usb power adapter. * charging cable types: micro usb, apple, type-c. * dp1151 / dp1161 apple clamp (clamp for mobile phone / tablet). * eas051r hand-held decoder (with detacher & remote key functions).
Performance & Main components 1.Max speed:20km/h 2.Max range:30kms about for adults and teenagers 3.Max load:80kgs 4.Frame:alloy turning bar,high -tensile steel body 5.Tyre size: 8" tyre with alloy rim,front pneumatic, rear solid tyre 6.Transmission:chain 7.Wheel base:70cm 8.With seat 9.Deck:ABS 10.Folding:easy fold 11.Brake :rear :drum brake 12.With rear absorber 13.User age: >14 years 14.Color:red,yellow,pink,blue,white,black ,etc Electronic specification: 1.Motor: 250w brush motor 2.Battery: 10ah 24v lead acid battery 3.Charge time:5-8 hours 4.Charge voltage:100-240volts 50hz&60hz 5.With front lights:LED light 6.With horn: yes Packaging : Unit packaging :Each in Color Box N&G weight:21.5&22.5kgs Qty / Export carton : 1 pc /ctn Carton size:86x28x41cm Container loading:275pcs/20GP, 650pcs/40HQ Payment and delivery : Shipment: by air or sea shipment to be advised Payment term: T/T or L/C at sight MOQ: 20PCS Optional Parts: 1.Remote Alarm 2. Helmet 3.Tool Kits Certificate: CE/ISO Warranty We have warranty for four main components:Motor,Battery,Charger,and Controller. 1)The motor:1 year 2)Battery:8 months 3)Charger:1 year 4)Controller:1 year
Model Number: W-1 54pcs 1W/3W cast aluminum led par can lights We produce 54pcs 1W/3W cast aluminum led par can lights, We devoted ourselves to stage special effect equipment for many years, covering most of Europe and the America market. We are expecting become your long-term partner in China. Specification of the 54pcs 1W/3W cast aluminum led par can lights: Power supply: AC100-240V, 50-60Hz Power consumption: 80W/200W Light source: 54pcs*1W/3W RGB or RGBW high brightness leds Lamp life: 6-10 ten thousand hrs Color: RGB color can be mixed to more than 16.7million kinds of color Beam angle: 15~40 degree (selectable) Function: Aluminum shell, nice and wide application,less power consumption,high brightness,stable performance,long life Continuous RGB color changing; DMX-controlled operation or stand alone operation with master/slave function; Have three kinds of strobe effect(random strobe, pulse-effect in sequences, strobe effect); Built-in sound activated programs via sound activated, Master/slave Individual control of red, green and blue LEDs 0--100% strobe; 0--100% dimmer via DMX mode Static color and RGB color mixing with or without DMX controller Color gradual change/color jump change/strobe, running speed adjustment Control mode: DMX512, master/slave, auto, sound active Control channels: 8CHS Effect: Color combination changer of the latest hybrid technology and excellent built-in program,Gradual, transition, and Strobe, color change, color fade effects,RGB, macros, run/strobe speed, automatic/sound, dimmer Operation menu: 4 digit digital LED display Carton package: Size: 270270350mm N.W: 3.8kg G.W.: 4.2kg
Product description Core material: pe, pp Color: black, white, grey , orange , blue and so on. Weight: 300g/m2, 400g/m2, 500g/m2 or customized Length:100m, 50m or customized Width:1.15m, 1.20m, 1m Thickness: 0.5mm-1.5mm Polyethylene polypropylene fiber waterproof membrane is one kind of multi-layer polymer waterproof membrane, its base materials are polypropylene fiber and polyethylene, adding some chemical auxiliaries, totally four layers, protective layer, anti-aging layer, waterproof layer, adhesive layer. Product features: 1) non-toxic, no smell, no pollution. 2) anti-aging, anti-oxidant, corrosion resistant. 3) good flexibility, tensile strength and anti-perforation well. 4) it can be the same life time with buildings. 5) easy operation. Application: 1) roofs, underground, tunnel. 2) industrial and civil building waterproof. 3) geo-synthetic liner for swimming pool, channels, irrigation system 4) especially for projects with high requirements in durability, anti-corrosion and deformation. Application method: 1. The application is simple and of no-pollution. It is mainly used in the middle of building for waterproofing. On this layer, other layers of protection and decoration are needed. 2. When application, pour the adhesive materials homogeneously on the smooth roof deck, then roll the membrane to make it fully adhered to the deck. 3.The adhesive materials are usually made from water, cement and other building glue at the volume rate of 3:6:1.
Core Material: PE, PP Color: black, white,grey ,orange ,blue and so on. Weight: 300g/m2,400g/m2,500g/m2 or customized Length:100M, 50M or customized Width:1.15M, 1.20M, 1M Thickness: 0.5mm-1.5mm Polyethylene polypropylene fiber waterproof membrane is one kind of multi-layer polymer waterproof membrane, its base materials are polypropylene fiber and polyethylene, adding some chemical auxiliaries, totally four layers, protective layer, anti-aging layer, waterproof layer, adhesive layer. Product Features: 1) Non-toxic, no smell, no pollution. 2) Anti-aging, anti-oxidant, corrosion resistant. 3) Good flexibility, tensile strength and anti-perforation well. 4) It can be the same life time with buildings. 5) Easy operation. Application: 1) Roofs, underground, tunnel. 2) Industrial and civil building waterproof. 3) Geo-synthetic liner for swimming pool, channels, irrigation system 4) Especially for projects with high requirements in durability, anti-corrosion and deformation. Application method: 1. The application is simple and of no-pollution. It is mainly used in the middle of building for waterproofing. On this layer, other layers of protection and decoration are needed. 2. When application, pour the adhesive materials homogeneously on the smooth roof deck, then roll the membrane to make it fully adhered to the deck. 3.The adhesive materials are usually made from water, cement and other building glue at the volume rate of 3:6:1.
Description: Product name: oem, gel wrist mouse pad, silicon, customized logo and printing Model name: kld-832 Materials: gel + pu base + cloth Style: wrist mouse pad Weight: 280g Size:26*22*2.5 (centimeter) Minimum order quantity: 500 pieces Color: black, blue, red, green, pink Brand name: guangzhou zengcheng kelida plastic Place of origin: guangdong, china (mainland) Printing method: sublimation/digital Eco-friendly: yes Certifications: sgs, iso 9001:2008 Functions: rest your wrist before computer Payment terms: t/t 30% in advance, the rest of 70% before delivery Packing and delivery: Packing details: opp bag/polybag, color box with card, blister Delivery details: 7 days Shipment: by sea, by air or express Sample terms: free for existed sample, usd 30/design custom sample, shipping charge is yours Sample lead-time: 3-5 working days after sample detail confirm Delivery: 15 working days after pre-production sample approved Back side: non-slip material Exporting countries: japan, korea and europe and the united Use for: perfect for optical mouse, mouse mice pad comfort wrist rest support mat computer pc laptop. This mouse pad will help your mouse get an accurate tracking and click, wonderful partner for mouse Logo can be printed as per customer's demands, different sizes and patterns available
Complete with a handle, this portable speaker unit is perfect for any scenario. Once charged, just grab the handle and take the speaker with you anywhere! it has the power for any outdoor or indoor situation. The speakers have an led light that shines a stylish blue glow through the speakers. Not only do they produce amazing quality sound, they look great too!1) output power: 3w*1 2) frequency response: 120 hz-18khz 3) horn size: 3inch/4 4) built-in battery: lithium battery 3.7v/800mah 5) input power: 5.0v 6) with bluetooth function Speaker function: support 3.5mm audio, pc audio input, sd and usb card, fm radio Accessories: usb charging cable, 3.5mm audio cable, remote control Size: 112*85*147mm meas:495*495*360mm(box/40units) Custom service: 1. Support for oem/odm custom-made: as the product factory, we welcome you to customize the wood green product, we can provide you free to add corporate advertising or your company logo. 2. We also can make out a cheapest program design that suit for your needs. Warranty service: 1. Before the delivery, we will check the the items' quality strictly one by one. 2. If for the shipping accidents caused, we will not responsible for it. 3. 12 months manufacturer's limited warr Anty for defective items (excluding items damaged and/or misused after receipt)
WINIW Suede Microfiber , also called microfiber suede leather, microfiber synthetic suede leather, microfiber artificial suede leather, is the highest quality grade synthetic leather PU leather, best quality faux suede leather, has similar structure and characters as real cow suede leather, same looks and same feel as suede leather, is the best vegan leather alternatives and the optimal substitute of real suede leather! Specification of WINIW Suede Microfiber: 1. Material: polyamide (nylon) + PU (polyurethane). 2. Thickness: 0.6mm - 2.0mm. 3. Width: 137cm. 4. Color: white, black, blue, grey, red, customized available. 5. Pattern: single side suede, double sides suede. Features of WINIW suede microfiber: 1. Good resistance to soiling, can be scrubbed by water & alcohol. 2. Good chemical resistance, acid resistant, alkali resistant, not ease to mildew. 3. Good lightproof, no fade. 4. Light weight, good soft handle, very good breathability. 5. Good physical properties, high folding strength, abrasion resistance, tensile strength. 6. Very comfortable hand feel, the surface same as nature animal skin. 7. Eco-friendly, the best substitution of nature animal skin. 8. Anti-UV, much high use rate than nature animal skin. Applications of WINIW Suede Microfiber: 1. Furniture upholstery and sofa Leather. 2. Automotive leather. 3. Luggage and bags leather. 4. Shoe leather. 5. Clothing leather. 6. Glove microfiber leather. 7. Fine inner packing microfiber leather. 8. Interior decoration leather. 9. More fields are waiting for us to develop.
