Yamaha Feeder Cl 16Mm Kw1 M3200 100 Suppliers and Manufacturers

Organic Plus NPK There are many formulas of NPK (12-30%) added to enrich NPK level appropriate for several crops and applying steps. NPK with organic matter and humic acid can both synergize to carry minerals by CEC (Carbon Exchangeable Capacity) to release slowly and minimize loss to environment. Higher NPK will boost promoting growth and productivity of plants. Analysis of OrganicPlus (6-3-6) Total N 6.56% P2O5 3.44% K2O. 6.62% Ca. 8.09% Mg. 2.11% S 0.89% Fe. 0.12% Zn. 0.02% Cu. 0.000045% Mn. 0.00067% Mo. 0.0000012% B. 0.08% Cl 1.78% Si 9.08% Organic matter 14.56% Humic acid. 5.67% E) OrganicPlus benefit of STF 1. Organic matter from many sources to fulfill completely mineral and soil improving function. 2. Compound of 15 kinds of natural minerals to complete plant required for growth, productivity or yield. 3. Improve soil to be more porous loose structure that good for root penetration and holding water. 4. Activate immunity of plant and reinforce cell strength by Silicon to protect diseases and insect a ack. 5. There are Humic and fulvic acid with high CEC (Carbon Exchange Capacity) to hold and carry more available mineral into soil and plant with slow releasing minerals for long time effectiveness. 6. There are several amino acids to function quickly refresh plant and activate bio function in soil. F) Other STF products 1. Organic fertilizer 100% (GreenMix) : (granular & powder) 2. Organic soil conditioner (granular) 3. Amino humic fulvic(granular) 4. Amino nano liquid fertilizer 5. OrganicPlus NPK formula Formula : 4-4-4 Formula : 6-3-9 Formula : 8-3-6. Formula : 12-3-3 Formula : 5-5-5. Formula : 6-3-15 Formula : 8-8-8 Formula : 6-3-3 Formula : 7-3-7 Formula : 9-3-9 Formula : 6-3-6 Formula : 8-3-3 Formula : 10-5-5

Potassium Persulfate is also known as potassium peroxydisulfate, its used as an initiator and as a strong oxidizing agent and is used widely in bleaching. Potassium Persulfate is used in circuit board cleaning, polymerization imitator, etching circuit boards, enhancing water purification treatment processes, aluminum and copper surface activation, hair dye decolorization. It can be used as an analytical regent, plastic initiator, and oxidant, and in the processing of photofinishing of film. Sales Specifications Content: 98.0% Min Active Oxygen : 5.8% Min Heavy metals (pb): 5 ppm Max Iron (Fe): 10 ppm Max Total Nitrogen (N): 0.1% Max Chloride (CL): 100 ppm MAx Moisture: 0.05% Max Foreign Matter: 10 particles max Packing 55.115 lb, 40 bags in a pallet DOT Transportation UN1492 Proper Shipping Name: Potassium Persulfate Hazard Class: 5.1 Packing Group: III

Sodium nitrite is commonly used as a reagent catalyst and nitrating agent in organic synthesis and also a cocatalyst in the catalytic oxidation of alcohols It is used as a color fixative in dyeing and printing textiles and as an intermediate in metal treatment and finishing It is also employed in bleaching photography rubber accelerators detinning solutions greases and medicines Sodium Nitrite Granular WC Code No 1903702 Sales Specifications Appearance White or Slightly White or Slightly Yellowish Crystalline Powder Purity on dry basis 9900 Min Los on drying 050 Max Alkalinity as Na2Co3 020 Max Chloride as Cl 005 Max Sodium Nitrate 100 Max Water Insoluble 005 Max Iron as Fe 0002 Max Heavy metal as Pb 50 ppm Max Clarity of 40 Aqueous Solution Clear solution after 15 min Anticaking Agent 020 Max BSS Sieve NaNO2 25 004 to 10 36 18 to 7 60 32 to 48 85 18 to 45 100 25 to 125 3 150 15 to 40 200 08 to 25 240 04 to 08 300 03 to 06 400 015 to 06 400 01 to 03 Packing 5512 Lb bag 40 bags per pallet DOT Transportation UN No 1500 Proper shipping name Sodium nitrite Hazard Class 51 61 Packing Group III

The main industrial use of nitric acid is it is used for the production of fertilizers. The other main applications are for the production of explosives, nylon precursors, and specialty organic compounds. It has also been used in various forms as the oxidant in liquid fueled rockets. Nitric Acid is also used in metal processing as an oxidant and used as an analytical reagent in elemental analysis. It is also used in low concentrations in wood working, for artificially aging pine and maple. Nitric Acid is also used in the cleaning industry as an etchant, degreaser and cleaning agent. Specifications HNO3: 68.0 wt% Min HNO2: 100 ppm Max Cl: 4 ppm Max Fe: 4 ppm Max Ig-Residue: 100 ppm Max Pb: 0.1 ppm Max Arsenic: 3 ppm Max Gravity (20oC, Sp.Gr): 1.405 Min Packing 617.288 lb drum, 4 drums per pallet DOT Transportation UN/NA: 2031 Proper Shipping Name: NITRIC ACID (other than red fuming with at least 65%, but not more than 70% nitric acid) Hazard Class: 8, 5.1 Packing Group:II

Tartaric Acid USP Food Grade also known as L+Tartaric Acid is mainly used as an food additive in many foods, such as soft drinks, bakery products, and candies. It also has many industrial uses like tanning, ceramics manufacture, and the production of tartrate esters for lacquers and textile printing. It acts as an intermediate to antitubercular drugs and a chiral reagent to prepare tartrate derivatives. It is used as a catalyst for resin finishing of polyester fabric, a resist agent in dyeing, an imaging agent in photography, a pH regulator for oryzanol synthesis, a cleaning and polishing agent of the metal surface, as a reductive agent in mirror manufacturing, in electroplating, sulfur removal, and acid pickling. Sales Specification Content: 99.5~101.0% Appearance: White Crystal Powder Appearance of Solution: Passes Specific Optical Rotation: +12degree ~12.8degreee Oxalic Acid: 350 PPM Max Cl: 100 PPM Max SO4: 150 PPM Max Ca: 200 PPM Max Heavy Metals (as Pb): 10 PPM Max Loss on Drying: 0.2% Max Sulfated Ash: 0.1% Max Arsenic:0.0003% Max Packing 55.12 lb bag, 40 bag per pallet

Stannous Chloride Anhydrous is a strong reducing agent and is used in many industrial processes, such as manufacturing dyes, phosphors, and polymers. The compound is a major ingredient in acid tin plating baths. Other uses are a mordant in dyeing; an additive to lubricating oil to prevent sludging; a stabilizer for perfume in soaps; in removing ink stains; a sensitizing agent for glass, paper, and plastics; and a soldering flux. Stannous chloride Anhydrous is used for preparing a number of tin(II) salts. It is a catalyst in many organic reactions. It is a common laboratory reagent. Properties Density 3.95 g/cm3 Composition Sn (+2) = 62.6%, Cl = 37.4% (Theoretical) Melting Point 246 C (475o F) Boiling Point 652C (1206o F) Specifications Appearance: Off-white flake Concentration: 80% Min Sb: 0.000 - 0.004% Cu: 0.000 - 0.002% Fe: 0.000 - 0.010% Pb: 0.000 - 0.010% Sn(II):62.0 - 64.0% Packing 100 LB Cardboard Drum DOT Transportation UN/NA: UN3260 Proper Shipping Name: Corrosive solid, acidic, inorganic, n.o.s. (Tin dichloride) Hazard Class: 8 Packing Group: III

Potassium Permanganate NSFAWWA is an oxidizing agent with a variety of niche applications Potassium Permanganate helps to remove minerals such as iron and manganese from raw water sources It is also for oxidation of organic and inorganic compounds Other applications for this chemical may include reagent for the synthesis of organic compounds medicines fruit preservation aquaculture air and gas purification metal processing and fumigation Sales Specification Appearance Dark Purple Free Flowing Powder Concentration 9750 Min MoistureH20 005 Max Chloride as Cl 002 Max Sulphate as SO4 005 Max Nitrate as NO3 001 Max Insoluble matter 170 Max Water Tolerance Test Pour Test Conforms Bulk Density at 22 C 90100 lbscuft Particle Size Distribution Retained on US Std Sieve No 40 Intl Std 425 2000 Max Passes through US Std Sieve No 200 Intl Std 75 700 Max Packing 5512 LB plastic drum 36 drums per pallet 33069 LB drum 4 drums per pallet DOT Transportation UN No 1490 Proper shipping name Potassium permanganate Hazard Class 51 Packing Group II RQ The Reportable Quantity RQ under CERCLA is 100 lbs

Sodium Sulfate Anhydrous is used in industrial applications like it's used as a drying agent to remove water from organic solvents. It is used as a laboratory reagent, a fining agent for molten glass, a levelling agent in textiles, a filler in detergents and soaps, and in deicing windows. It is also used to make Kraft paper, starch and glass, explosives and in electroplating. Sodium Sulfate Anhydrous WC Code: 19-045-02 Sales Specification Na2SO4: 99.0% Water insoluble matter: 0.05% Ca & Mg (Mg): 0.15% Chloride (Cl): 0.35% Fe: 0.002% Moisture: 0.20% Whiteness: 82% Ph Value: 6-8 Packing 55.115 lb bag, 40 bags per pallet Sodium Sulfate Anhydrous (SVM) WC Code: 19-045-01 Sales Specification Appearance: White Granular Crystalline Sodium Sulfate (Na2SO4): 99.0 - 99.7 % Sodium Chloride (NaCl): 0.20 -0.50 % Sodium Carbonate (Na2CO3): 0.10 â?? 0.50 % Boric Oxide (B2O3): 0.02- 0.05 % Iron (Fe): 0 -10 ppm Water Insoluble: 0 - 20 ppm Arsenic (As): 1 -3 ppm Melting Point: 884C Specific Gravity@ 25 C: 2.664 Specific Heat@ 25 C: 30.64 cal/deg-mol Heat of Solution@ 18 C: 5.55 Kcal/g-mol or 22.03Btu Heat of Formation@ 25C: 331.5 Kcal/kg or1315.6 Btu Heat of Hydration to decahydrate @ 18 C: 135.3 Kcal/kg or 536.9 Btu SCREEN ANALYSIS, (% Cum. Retained) U.S. STD. TYPICAL SIEVE NO. RANGE + 20 0 - 1 % + 40 2 - 35 % + 60 10 - 65 % + 100 20 - 70 % + 200 50 - 90 % Packing 25 KGS paper bag. 40 bags per pallet

Sodium Tetraborate Decahydrate is more popularly known as Borax10 mol. It is often used as a buffering agent. Borax decahydrate is utilized as a cleaning agent, especially for laundry purposes. Researchers may employ borax for surface treatment purposes, such as cleaning, etching, or modifying the surface properties of materials. Borax decahydrate serves as a preservative and pH buffer. It helps extend the shelf life of certain products and maintains their desired pH levels. Borax 10 mol is the least concentrated sodium borate product, because it has the most bound water (10 molecules). It is found in detergents, and personal care products. It is used to make glass, ceramics, and insulation. It is a flux in metal recovery, wire drawing and refractories. It is also a corrosion inhibitor in automotive antifreeze, and a preservative in casein-based adhesives. Functions pH buffer Preservative Cleaning Agent Buffering Agent Sales Specifications Appearance: White, granular, crystalline solid Grades: Technical Standard Description: The surface of the crystal is usually chalk white as a result of partial loss of water of hydration. Decahydrate Borax (Na2B4O7*10H2O): 100%min. Anhydrous Borax (Na2B4O7): 52.8%min. Boric Oxide (B2O3): 36.5%min. Sodium Oxide (Na2O): 16.3%min. Water of Crystallization (H2O): 47.2%max. Chloride (Cl): 200ppm max. pH in Water at 20C(68F): Weight 0.1%: pH 9.24 Weight 0.5%: pH 9.23 Weight 1.0%: pH 9.23 Weight 2.0%: pH 9.24 Weight 3.0%: pH 9.27 Weight 4.78%(Saturation): pH 9.32 Physical And Chemical Properties Specific Gravity 25C: 1.73 Specific Heat 25C: 147 cal/deg-mol Heat of Solution (Absorbed) 18C: -2.589Kcal/g-mol or -102.59Btu Heat of Formation: -1503.0 Kcal/g-mol or -5964.7 Btu Packing 55.12 lb bag, 42 bags per pallet