• Waterproof: ip55 Frequency range can be suitable for different countries or areas. 136-174&350-470mhz (rx/tx) 136-174&216-280mhz (rx/tx) 136-174&400-480mhz (rx/tx) 136-174&225-226mhz (rx/tx) 136-174&420-520mhz (rx/tx) 144-146&430-440mhz (rx/tx) 136-174&400-470mhz (rx/tx) 136-174&245-250mhz (rx/tx) 66-88&400-480mhz (rx/tx) Fm:76-108mhz (rx) 1750hz tone Dtmf encoding function Ctcss/dcs scan (digital/analog) English voice guide Digital fm radio Wide/narrow bandwidth selection (25khz/12.5khz) Priority scan, add scanning channel High/low power selection Channel name edit and display 50 groups ctcss/105 groups dcs Multi step frequency (5k/6.25k/10k/12.5k/25k/50k/100k) Vox transmission Transmit overtime voice prompt Begin/end transmitting beep prompt
í±High system gains. í±Full duplex and double-end design,external power supply,and convenient installation. í±ALC technology with auto-steady function adopted. í±Provide power indication and uplink and downlink indications. í±With the amplified linear power,the intermodulation and spuriousness are suppressed effectively. í±The reliability conforms to GB6993-86 standards. í±The electromagnetic compatibility conforms to ETS300 609-4 standards. Specification Dual Band (GSM+DCS) Signal Booster Specification TE9018A TE-9018B TE-9018C Frequency range Uplink GSM 890-915 +DCS1710-1785(MHz) Downlink GSM 935-960 + DCS1805-1880(MHz) Gain (dB) GSM Uplink Gpí¦55 Gpí¦65 Gpí¦45 GSM Downlink Gpí¦60 Gpí¦70 Gpí¦50 DCS Uplink Gpí¦50 Gpí¦55 Gpí¦45 DCS Downlink Gpí¦55 Gpí¦60 Gpí¦50 Gain adjustable range MGCí¦30dB Output power(dBmú¬ í¦17 í¦20 í¦17 Pass band ripple GSM í_4dB DCS í_15dB Guard band rejection GSM (BW-60dB)í_42 MHz (BW-70dB)í_45 MHz DCS (BW-60dB)í_104MHz (BW-70dB)í_107 MHz I/O impedance 50ª+/N Connector I/O return loss í_-10dB Noise figure í_-8dB Intermodulation attenuation (Po=13dBm) í_-40dBc Transmission Delay í_0.5ª¦s Ambient temperature -10íµí½50íµ Power supply AC110í½220Ví+10% 45í½55Hz Size 148mmí-106mmí-33mm Reliability To the GB6993-86 standard Electromagnetic compatibility To the ETS300 694-4 standard Function a) Power supply LED denote b) Export power LED denote
Dual Band LTE Repeater also known as cell phone repeaters were developed to address the two factors that cause poor cell phone reception. They're designed to amplify a weak outside signal and bypass any obstructions to provide a strong inside signal to an area that was originally lacking.The system works by mounting an outside antenna in a location that currently has signal, which is typically on the roof. The signal is passed from the outside antenna, by a cable to a signal amplifier inside the building. Once the signal is amplified, it is then sent to an inside antenna, where it is broadcast out to the area which needs better reception. The system also works in reverse, with the signal from your phone being amplified and broadcast back to the tower, ensuring strong, two-way communication.
Dual-Band LTE Repeater is used to improve network coverage of mobile phone in home and offices.Dual-Band LTE Repeater is a complete network coverage solution for areas which face problems like disturbance in call, call drops and less network signals. Dual-Band LTE Repeater is placed at a network rich area from where it catches signals from the nearest tower and these signals are transmitted to the area facing the signal problem.It can be applied at meeting rooms, conference rooms, museums, galleries, theaters, concert halls, churches, temples, restaurants, classrooms, training centers, factories, banks, trains, bus and more Places that require silence, confidentiality and information security
A wireless switch; Ssid broadcasting switch; Working frequency band selection: 2.4 ghz and 5 ghz; 2.4 ghz channel choice: 1-13;5 ghz channel choice: 149, 153, 157, 153, 157; Spectrum bandwidth optional: • 20 mhz, 40 mhz, automatic; 2.4 ghz wireless mode optional: only 11n, 11 bgn mixed (default), 11 bg mixed, 11g only, only 11b; 5 ghz wireless mode optional: only 11n, 11 an ixed (default), 11 a, only. Wds wireless bridge; Wireless host status display. Wireless security Wireless mac address filtering; Switch of wireless security function; 64/128/152 - bit wep encryption; Wpa-psk/wpa2-psk¡¡éwpa/wpa2 security mechanism; Function Network settings Wan connection type automatic detection; Wan connection type support: pppoe, dynamic ip, static ip; Dial-up way type: automatic dialing, manual dialing; Support the pptp, l2tp, openvpn (optional). Ddns dynamic domain name; Static routing; Dhcp settings Dhcp server; Dhcp client; Client list; Static address allocation; Port forwarding A virtual server; Special application; Dmz host; Upnp settings; Security settings Ip and mac address binding prevention of arp attacking; Ip address filtering; Mac address filtering; De dos attack prevention; Flood attack prevention; Ping packet control; System tools Traffic statistics; System security log; Remote web management; Configuration files, import and export; Tftp software upgrade; Using environment Working temperature: 0 ¡æ to 40 ¡æ; Storage temperature: - 20 ¡æ to 60 ¡æ; Working humidity: 10% to 90% rh without condensation; Store humidity: 5% to 90% rh without condensation; Carton cases
The power supply Dc 12v, 1a, Size 100 * 95 mm Wireless parameters The basic function A wireless switch; Ssid broadcasting switch; Working frequency band selection: 2.4 ghz and 5 ghz; 2.4 ghz channel choice: 1-13;5 ghz channel choice: 149, 153, 157, 153, 157; Spectrum bandwidth optional: • 20 mhz, 40 mhz, automatic; 2.4 ghz wireless mode optional: only 11n, 11 bgn mixed (default), 11 bg mixed, 11g only, only 11b; 5 ghz wireless mode optional: only 11n, 11 an ixed (default), 11 a, only. Wds wireless bridge; Radio host status display. Wireless security Wireless mac address filtering; Switch of wireless security function; 64/128/152 - bit wep encryption; Wpa-psk/wpa2-psk¡¡éwpa/wpa2 security mechanism; Function Network settings Wan connection type automatic detection; Wan connection type support: pppoe, dynamic ip, static ip; Dial-up way type: automatic dialing, manual dialing; Support the pptp, l2tp, openvpn (optional). Ddns dynamic domain name; Static routing; Dhcp settings Dhcp server; Dhcp client; Client list; Static address allocation; Port forwarding A virtual server; Special application; Dmz host; Upnp settings; Security settings Ip and mac address binding prevention of arp attacking; Ip address filtering; Mac address filtering; De dos attack prevention; Flood attack prevention; Ping packet control; System tools Traffic statistics; System security log; Remote web management; Configuration files, import and export; Tftp software upgrade; Using environment Working temperature: 0 c to 40 c; Storage temperature: - 20 c to 60 c; Working humidity: 10% to 90% rh without condensation; Store humidity: 5% to 90% rh without condensation; Carton cases
Dual band gsm&dcs booster Product description We professional manufacturer followings products since 1995: *gsm fullband/band selective signal booster, *cdma fullband/band selective signal booster, *dcs fullband/band selective signal booster, *gsm&dcs dual band signal booster *pcd fullband/band selective signal booster, *wcdma fullband/band selective signal booster Today, we would like to introduce gsm&dcs dual band signal booster: *technical features: 1)high system gains. 2)full duplex and double-end design, external power supply, and convenient installation. 3)alc technology with auto-steady function adopted. 4)provide power indication and uplink and downlink indications. 5)with the amplified linear power, the intermodulation and spuriousness are suppressed effectively. 6)the reliability conforms to gb6993-86 standards. 7)the electromagnetic compatibility conforms to ets300 609-4 standards. Welcome to contact us to know more details or check following parameters Packaging : neutral packaging
Brand UIY Product Name RF Coaxial Circulator Article Number UIYCI1318A8T12SF Frequenc y Range 8 ~ 12GHz Insertion Loss 0.5dB Isolation 18dB VSWR 1.3 Froward Power 60W Reverse Power 10W Connector Type SMA-F Temperature -55 ~ +85â?? Dimension 13*18*13.8mm Warranty 1 Year Our products can be customized according to the requirements of customers. Due to the diversity of spec, weâ??re unable to display all products. If you have parameter requirements for frequency, power, insertion loss, connector type, dimension etc., pls visit our website, or feel free to contact us directly.
Quad-band Dual sim Dual standby TV phone, 2.6 inch touch screen, Hand shaking GSM Network: 850/900/1800/1900MHZ, Dimensions: 114 x 49 x 11mm Support external TF card up to 8GB 2.6 inch touch screen with Stylus 1.3M Camera with video and digital voice recording MP3 player: play MP3, midi, WAV format and support MP3 ringtones MP4 player: play stereo 3GP/MP4 movie Support: TV, FM radio(can output voice), Bluetooth, WAP 2.0, GPRS: CLASS 10 Support Hand shaking function(change music,TV and turn over page by shaking) Other function: game, alarm clock, calculator,etc. Talk time: About 4-5Hours Stand-by time: About 100-200Hours Language: English,French,Spanish,Italian,German,Portuguese Accessories: Packing box, 2 pcs batteries, battery charger, earphone line, USB line, Manual. Weight;0.4kg Size:16x12x6 cm.
Product Description You will be lucky with this device, if you are still out of the booster world. If you are still suffering the no signals life, start from here, it is your time to change your life to a better one. This GSM/DCS Dual Band Cell Phone Signal Booster is equipped with DCS/GSM Dual Band Repeater, High-gain linear power amplifier and Ultra-low noises receive amplifier, etc. It will allow you for catching more calls no matter anytime anywhere. There is no interference to the base station after the opening the original system and the base station without the need to adjust parameters. With stable and reliable electromagnetic compatibility design, you will find out the best one for your need. It can be used in following small regions signal blind or weak signal area, such as underground or semi-underground place of business, basements, underground parking, etc. Also this booster is popular with small-scale hot-spot signal Complaints areas, such as conference rooms ,a small supermarket, small shopping malls ,the office and small public areas ,etc. Traffic and large social influence areas ,such as bars ,cafes ,dance halls ,cafes ,fitness clubs and leisure etc. Some other occasions you can also see it. Elevator, lift wells in particular, home, office, luxury yachts, private cars, public security system and road safety management, etc. Go and click your favorite one into cart now! GSM/DCS Dual Band Cell Phone Signal Booster Specification: Frequency range -Uplink GSM824-849MHz, PCS1850-1910MHz -Downlink GSM869-894MHz, PCS1930-1990MHz Gain: -Up link: Gp�65dB,Downlink: Gp�70dB -Up link: Gp�60dB,Downlink: Gp�67dB Output up: -GSM Up link 27dBm,PCS Up link 27dBm -GSM Downlink: 30dBm, PCS Downlink: 30dBm Function: -Power supply LED denote -Export power LED denote Port VSWR:�1.8DB I/O impedence: 50Ω/N connector ALC:�20dB In-Band ripple:�6dB Noise figure:�6dB Transmission delay:�0.5μs Ambient temperature:-15??i> Power supply: AC: 110-240V DC: 9V Size: 220*170*55mm Coverage area: 80Sqm Accessories Cell Phone Signal Booster Indoor Antenna Outdoor Antenna Power Adapter Coaxial Cable 5M Coaxial Cable 10M Indoor Antenna Accessories and Screws User Manual
Product Description You will be lucky with this device, if you are still out of the booster world. If you are still suffering the no signals life, start from here, it is your time to change your life to a better one. This GSM/DCS Dual Band Cell Phone Signal Booster is equipped with DCS/GSM Dual Band Repeater, High-gain linear power amplifier and Ultra-low noises receive amplifier, etc. It will allow you for catching more calls no matter anytime anywhere. There is no interference to the base station after the opening the original system and the base station without the need to adjust parameters. With stable and reliable electromagnetic compatibility design, you will find out the best one for your need. It can be used in following small regions signal blind or weak signal area, such as underground or semi-underground place of business, basements, underground parking, etc. Also this booster is popular with small-scale hot-spot signal Complaints areas, such as conference rooms ,a small supermarket, small shopping malls ,the office and small public areas ,etc. Traffic and large social influence areas ,such as bars ,cafes ,dance halls ,cafes ,fitness clubs and leisure etc. Some other occasions you can also see it. Elevator, lift wells in particular, home, office, luxury yachts, private cars, public security system and road safety management, etc. Go and click your favorite one into cart now! GSM/DCS Dual Band Cell Phone Signal Booster Specification: Frequency range -Uplink GSM824-849MHz, PCS1850-1910MHz -Downlink GSM869-894MHz, PCS1930-1990MHz Gain: -Up link: Gp65dB,Downlink: Gp70dB -Up link: Gp60dB,Downlink: Gp67dB Output up: -GSM Up link 27dBm,PCS Up link 27dBm -GSM Downlink: 30dBm, PCS Downlink: 30dBm Function: -Power supply LED denote -Export power LED denote Port VSWR:1.8DB I/O impedence: 50/N connector ALC:20dB In-Band ripple:6dB Noise figure:6dB Transmission delay:0.5μs Ambient temperature:-15??i> Power supply: AC: 110-240V DC: 9V Size: 220*170*55mm Coverage area: 80Sqm Accessories Cell Phone Signal Booster Indoor Antenna Outdoor Antenna Power Adapter Coaxial Cable 5M Coaxial Cable 10M Indoor Antenna Accessories and Screws User Manual
Features Support USB3.0 Support 20MHz/40MHz/80MHz frequency 5G compatible with IEEE 802.11ac and IEEE 802.11a standard 2.4G compatible with IEEE 802.11n, IEEE 802.11g, IEEE 802.11g standard Detect the network and change transmit speed automatically Support WPA/WPA2/WPA-WPA2/802.1x and 64/128 bit WEP encryption Support WPS 2.0 Internal Omni-directional Antenna Support 2.4G and 5G dual band Support Wi-Fi Direct Support Multiple BSSID Support QoS-WMM, WMM-PS Support WPS: PIN, PBC Support Infrastructure mode, Ad-Hoc mode and Soft AP three modes Support Cisco CCX Low consumption management Supported OS: Window XP/Vista/Win7/Win8/Win8.1/Mac OS 10.10/Linux v3.0.0.1
UHF dual channel wireless receiver can receive two wireless microphones or two lapel microphone or a handheld microphone and a lapel microphone, and parallel to control the microphone volume. Quartz lock with a fixed frequency UHF band, with the latest "noise detection" mute control, it can completely eliminate the noise generated by loud noise interference. Dual-channel receiver audio output is a mixture of two-channel output, and separate balanced output can meet the input characteristics of a variety of Amplifiers. Metal chassis and SMT circuit, there are 30 groups frequencies between 760-920 MHz for choice . Product Features: Frequency Range: 740-920MHZ Modulation System: quartzcrystal control Rf stability: 0.005%(-10-50) Frequency Resopone :50Hz-18KHz3dB RF Power:10mW Noise Ratio:>100dB T.H.D: 0.5%.
Application:cdma /gsm mobile networks Frequency range:824-894, 1850-1990mhz Average gain:0-3dbi, at 824-894mhz , 0-4dbi, at 1850-1990mhz Vswr:
Platform: spreadtrum 6531 Net: gsm850/900/1800/1900mhz Dimensions: 108*45.5*13mm Display: 1.77-inch qcif screen Battery capacity: 600mah Sim card: dual sim dual standby System memory: 32 + 32mb Camera: 0.08mp on hardware, 0.3mp on software Supports gprs, camera, bluetooth, sound recorder, t-flash card, fm radio, audio, video, torch supported Languages: english, french, arabic, spanish, turkish, thai, vietnamese, portuguese, persian
Features Support USB3.0 Support 20MHz/40MHz/80MHz frequency 5G compatible with IEEE 802.11ac and IEEE 802.11a standard 2.4G compatible with IEEE 802.11n, IEEE 802.11g, IEEE 802.11g standard Detect the network and change transmit speed automatically Support WPA/WPA2/WPA-WPA2/802.1x and 64/128 bit WEP encryption Support WPS 2.0 Internal Omni-directional Antenna Support 2.4G and 5G dual band Support Wi-Fi Direct Support Multiple BSSID Support QoS-WMM, WMM-PS Support WPS: PIN, PBC Support Infrastructure mode, Ad-Hoc mode and Soft AP three modes Support Cisco CCX Low consumption management Supported OS: Window XP/Vista/Win7/Win8/Win8.1/Mac OS 10.10/Linux v3.0.0.1
Specifications 1. 8 ports GSM fixed wireless terminal 2. Auto IMEI changer 3. Auto SIM rotation 4. Each port has 4 sims 5. 32 sims rotation Brand: Etross or OEM brand Model No.: Etross-8888 Name: Hi-Q Etross-8888 GSM 8 ports/channnels fixed wireless terminal(FWT)/GSM Gateway/FCT/fixed cellular terminal/WLL wireless local loop. General Description: Etross-8888 is a GSM to Analog Converter, the device can produce a FXS line to allow a regular phone to be connected and used just like a local landline(PSTN) except your calls will go out the GSM network. This device can both receive and make calls. The main application is: Connecting the RJ-11 FXS line to connect Ordinary telephone set for voice call, to connect PBX for call extentions, to connect billing systems for public phone use, to connect VoIP gateway to realize VoIP call termination, to connect alarm system for security purpose, etc. It is not a VOIP gateway, nor a GSM+VOIP gateway, It is a GSM Fixed Wireless Terminal that produces a Analog FXS phone line. Main function: 1. It has 8 channels with 8/32/64 SIM cards, which can be Auto Switched. 2. The IMEI can be changed to any number you want. 3. SIM rotation by dial times, by total talking times, by working hours 4. Setting up and modification Parameter by telephone set Features: 1) It is a 8 channels GSM Gateway that has 8 ports FXS interfaces; 2) It can connect with ordinary telephone set, PBX, VOIP Gateway, Billing meter etc.; 3) Dialing tone frequency: 450hz; 4) Employ Industrial module Sim300(900/1800/1900Mhz), M10(850/900/1800/1900Mhz), Wavecom Q2403A( 900/1800MHZ) to make; 5) Can adjust dial interval from 0.5sec to 9 secs by setting up from telephone set; 6) Can adjust voice volume by setting up from telephone set; 7) SIM card supported (1.8V, 3V); 8) Caller ID display; 9) DTMF Dialing; 10) Bell signal; 11) Polarity reversal; 12) The RJ-11 socket which connect the phone or billing system for metering purpose; 13) Antenna socket (SMA); 14) IP Presetting; 15) Working status and Signal Strength by LED indicator; 16) IMEI Change (optional) Checking Package: ETROSS-8888 GSM 8 PORTS FWT: 1pcs; Power Supply Cable: 1pcs, GSM Antenna with 3m cable: 8pcs, User's Manual 1pcs. Product dimension: L455x W280 x H45mm Gift box dimension: L510x W170x H64mm G. W: 4.5kg.
Brand : Lisheng HS Code : 3505910023 Product Specifications/Features : You enhance your communication by this durable walkie talkie With a build-in speaker and an antenna sticking out of the top, the hand-held transceiver can be used to communicate with each other within a designated zone Dual band, dual frequency, dual display and dual standby Frequency: VHF 136 to 174MHz, UHF 350 to 390/400 to 470MHz Work mode: V-U, V-V, and U-U Repeater function Hi/Lo power output: 1/5/4W CTCSS (50 groups)/DCS (1024 groups) 128 half-duplex channels 1,750Hz tone Auto off set frequency Dual watch on/off Auto off power Battery saving function Low battery warning Wire clone Beep Roger Emergency channels VOX function VOX extend time TOT (time out timer) TOT PRI-alarm Multi-scan types Busy channel lockout Wide/narrow channel bandwidth selective Channel named Three optional modes Manual programmed/PC programmed Dot matrix LCD display Step: 5/625/10/25/25KHz Menu and short cut key both modes optional FM radio Dimension: 111*59*37mm(without antenna) Weight(approx.):230(include battery) Color box:24.5*20.5*6.2cm(including battery,antenna,charger,adaptor,belt clip,radio) Outside carton: 50*32*42cm(for 20pcs) Container loading qty: about 300pcs carton(20ft container)
Model Number: UIYBPF6060A Pass Band: 4800MHz Insertion Loss: 1.6dB VSWR:1.35 Rejection:40dB@±40MHz 50dB@±50MHz Power:10W Connector Type: SMA Female Temperature: -10~+60
Model Number: UIYBPF12028A Pass Band:1800~2300MHz Bandwidth:400MHz Insertion Loss:0.3dB VSWR:1.3 Rejection:80dB@Fc�±800MHz 65dB@Fc�±400MHz Power:20W Connector Type: N SMA Temperature 40~+85 Dimension:120*28*24mm
