Wood pellet is the use of high temperature, high pressure extrusion equipment, the biomass material extrusion into a certain form - pellets or briquettes of wood fuel. This kind of fuel has the advantages of high specific value, high calorific value, full combustion, low cost, easy to use, clean and sanitary, easy storage and transportation, etc. It can be used as fuel for combustion furnace, gasifier, heating furnace, gasification station and thermal power plant, and the combustion efficiency for heating can reach 83%.
Our pellets are ENplus certified. In terms of abrasion, ash content, fine particles, and heating value, they exceed the minimum requirements of the quality standard. The standard values are intended to ensure high product quality, good heating performance, and a stove-friendly combustion. This way, you can heat energy-efficiently because your stove runs smoothly and you need fewer pellets.
The ENplus values in detail:
Lower heating value over 4.8 kWh/kg
This is the most important value for you, as the higher the lower heating value, the greater the maximum usable amount of heat generated during combustion. The wood pellets we offer have a lower heating value of over 4.8 kWh/kg â?? the ENplus standard requires 4.6 kWh/kg. This value is important because only the lower heating value measures the actual energy content of your pellets! Many manufacturers and retailers indicate the upper heating value on the packaging, which is always higher than the lower heating value but does not provide any information about the actual energy content of the pellets during combustion.
Abrasion under 0.6%
The ENplus standard for abrasion is 2%, which corresponds to a mechanical strength of 98%. This means: The lower the abrasion, the more stable the pellets. Our offered pellets have an abrasion of 0.6% and a mechanical strength of 99.4%, which is significantly better than the standard. This means that less dust and fine particles are produced during combustion.
Ash content less than 0.4%
ENplus certified pellets may have an ash content of 0.7%. This refers to the amount of ash that remains after combustion. The ash content of the offered wood pellets is a maximum of 0.4%, making it particularly low and gentle on your stove.
Almost dust-free with a fine particle content of 0.05%
The bagged product is almost dust-free because it has only a fine particle content of 0.05%. This is well below the ENplus standard upper limit of 0.5%. Fine particles are defined as pellets smaller than 3.15 mm. If this proportion is too high, deposits can form in the stove, affecting heating quality.
Optimal moisture content
The pellets from Dorr Biomass Farm have a moisture content of 6.9 to 7.1%. This is optimal because a higher moisture content reduces the heating value of the pellets during combustion and produces more soot. The ENplus standard therefore allows a maximum of 10%. If the moisture content is too low, pellets burn too quickly and do not heat efficiently.
Wood pellets are a solid fuel made from compressed organic materials, known for their high density and low moisture content, which makes them burn efficiently. SAM General Trading is committed to providing top-quality wood pellets, ensuring reliable performance and sustainability for customers around the globe.
We offer a full wholesale and bulk supply to retailers, farm shops and eCommerce partners up and down the EU and Worldwide. We only supply quality, value for money products with a consistent supply that we have worked with for many years.
Our prices depends on the wood type, quantity and also depends on your location .
Our pellets are flammable, pure and compact. The pellets can be use for heating, cooking, and generating electricity, etc. The pellets are also granular, slick, well-stored, efficient as well as
environmentally friendly, and our prices are favorable.We are offering 6mm and 8mm Wood pellets DIN EN PLUS packed in 15kg plastic bags, big bags or bulk. Volume up to 3000t per month. We can offer the pellets delivered to your place or near port anywhere in
Europe or Middle East. Bases:Pine,Beech,Fir,Spruce Oak, Hard coniferous
Product name Wood pellet
Origin Vietnam
Min Order Quantity 1 container 20ft or 40ft
Supply ability 5000 tons/month
Heating value 4723KgCal/Kg
Diameter 6mm or 8mm
Length 20mm-50mm
Moisture 9.38% max
Ash (Dry basic) 1.46% max
Broken rate 1.5% or less
Density 1,27kg/dm3
Sulfur content 0.05% max
Chlorine 0.05% max
Material Rubber, acacia, pine wood
Payment term By 100% L/C at sight or T/T
Packing
700-800kg/jumbo in container 40ft
pellet machine, with the advantages of low noise, easy and stable operation,
high automation, can make pellet dia size from 6mm to 12 mm and the output capacity from 1.5t/h to 2.5t/h. We can offer you the complete solution for making pellets, from crushing, drying to pelletizing.
Features :
1. This machine adopts gear first stage driving system, with ideal drive ratio and enormous driving force, its transmission us stable with low noise, operate simply, no blocking is happened to the machine easily.
2. The maximize design if pinch roller can lower the requirement to moisture content of materials in particle molding.
3. The motor and gear cases are installed at the heavy pedestal, pin coupling is used to realize direct connecting, which can exempt from foundation installation and easy to repair and maintain.
4. The machine is equipped with patented water circulation; the cooling system can be used to control the temperature rising of each part efficiently, to guarantee the continuous, stable, reliable running of the machines.
5. The machine adopts advanced variable frequency motor to feed, which equipped with overload intelligent protection.
Heating value - 4800KgCal/Kg
Diameter - 6mm or 8mm
Length - 10mm-50mm
Moisture - 7.32% max
Ash (Dry basic) - 0.91% max
Broken rat - 1.5% or less
Density - 1,27kg/dm3
Sulfur content - 0.05% max
Chlorine - 0.05% max
Quality wood pellets from oak, spruce , pine and beech woods
Diameter: 6-8 mm
Humidity: <10%
Heat: > 17, 5 kJ / kg
Ash content: <0.8%
Density >1100kg/m3
Moisture content <9%
Ash content <0.7%
Sulfur content<0.01%
Nitrogen content<0.13%
Caloric value>4750 Kcal/kg
Benefits of wood pellets
high heat
Convenient transportation
Save storage space
Do not cause air pollution, environmental
Quality wood pellets from oak, spruce , pine and beech woods
Diameter: 6-8 mm
Humidity: <10%
Heat: > 17, 5 kJ / kg
Ash content: <0.8%
Density >1100kg/m3
Moisture content <9%
Ash content <0.7%
Sulfur content<0.01%
Nitrogen content<0.13%
Caloric value>4750 Kcal/kg
Benefits of wood pellets
high heat
Convenient transportation
Save storage space
Do not cause air pollution, environmental
Quality wood pellets from oak, spruce , pine and beech woods
Diameter: 6-8 mm
Humidity: <10%
Heat: > 17, 5 kJ / kg
Ash content: <0.8%
Density >1100kg/m3
Moisture content <9%
Ash content <0.7%
Sulfur content<0.01%
Nitrogen content<0.13%
Caloric value>4750 Kcal/kg
Benefits of wood pellets
high heat
Convenient transportation
Save storage space
Do not cause air pollution, environmental
Quality wood pellets from oak, spruce , pine and beech woods
Diameter: 6-8 mm
Humidity: <10%
Heat: > 17, 5 kJ / kg
Ash content: <0.8%
Density >1100kg/m3
Moisture content <9%
Ash content <0.7%
Sulfur content<0.01%
Nitrogen content<0.13%
Caloric value>4750 Kcal/kg
Benefits of wood pellets
high heat
Convenient transportation
Save storage space
Do not cause air pollution, environmental
Quality wood pellets from oak, spruce , pine and beech woods
Diameter: 6-8 mm
Humidity: <10%
Heat: > 17, 5 kJ / kg
Ash content: <0.8%
Density >1100kg/m3
Moisture content <9%
Ash content <0.7%
Sulfur content<0.01%
Nitrogen content<0.13%
Caloric value>4750 Kcal/kg
Benefits of wood pellets
high heat
Convenient transportation
Save storage space
Do not cause air pollution, environmental
1. High calorific value;
2. Contains no sulphur or phosphorus, non-corrosive;
3. Green and Environmental Protection;
4. Compacted fuel, reduce transportation cost and save storage space.
5. Biofuels and made from natural, renewable energy sourcesâ??trees
Production process:crushing raw material=>material drying(rolling,air driving)=>high temperature,high pressure,shaping process=>sticks packed in kiln=>high temp carbonization(400-600degree,15days,or per customerâ??s requirement)=>taking out and packing charcoal.
Specifications
Cheap wood pellets
1.Favorable price
2.Smokeless, odorless and sparkless
3.Good raw materials of barbecue
Hot Selling 100% Sawdust Biomass Wood Pellets Available for Export
Descriptions: Wood pellets are a renewable resource, the fuel that is already widely available in the world nowadays. The sawdust or wood shavings are compressed under great pressure and forced through holes. This is a hot process and the natural lignin in the sawdust/wood shavings melts and binds the dust together, holding the pellet in shape and giving it that characteristic sheen on the outside
Economic efficiency: Wood pellets are extremely dense and can be produced with a low moisture content (below 10%) that allows them to be burned with a very high combustion efficiency. Their high density also permits compact storage and rational transport over long distances. Electricity generated from pellets in converted coal plants is almost the same cost as electricity generated from natural gas, diesel.
Environmentally friendly: Wood pellets are a sustainable fuel that can deliver a significant reduction in net carbon emissions when compared with fossil fuels. Its production and use also bring additional environmental and social benefits.
Using scopes: Biomass fuels replace fossil fuels in power plants, stoves, the boiler of textile, food, leather, animal feeding, dye industrial, and animal bedding.
