Wellhead Polished Rod Clamp For Oilfield Suppliers and Manufacturers

We deals in the following products of India, China, Taiwan and Korea Origin:- 1)Hot Rolled Steel (Hot Rolled Sheets, Hot Rolled Coils, Hot Rolled Plates, Hot Rolled Bars etc) 2)Galvanized Steel (Galvanized Steel Tapes, Galvanized Steel Wires, Galvanized Steel Strips, Galvanized Steel Coils, Galvanized tubes etc) 3)Cold Rolled Steel (Cold Rolled Steel Strips, Cold Rolled Steel Coils, Cold Rolled Sheets etc) 4)Stainless Steel (Stainless Steel Strips, Stainless Steel Coils, Stainless Steel Wire, Hardened and Tempered Spring Steel, Stainless Spring Steel, Spring Steel Wires etc) 5)Steel Tube and Pipes ( ERW, CRW, CRS, Black, Galvanized, Stainless ) 6)Forged Column Clamps, Girder Clamps, Pressed Clamps, Rapid Clamps, Support Clamps & Wedge Clamps. 7)Heavy Duty Props & Light Duty Props. 8)Nuts, Bolts, Nails & Fastners 9)System Scaffolding, Base Plate & Adjustable Base. 10)Steel Tie Rod, Waller Plates and Wing Nuts. 11)Drop Forged and Pressed Sheet Metal Couplers of all types. 12)Steel Billets, Steel Angle & Steel Channels.

We deals in the following products of India, China, Taiwan and Korea Origin:- 1)Hot Rolled Steel (Hot Rolled Sheets, Hot Rolled Coils, Hot Rolled Plates, Hot Rolled Bars etc) 2)Galvanized Steel (Galvanized Steel Tapes, Galvanized Steel Wires, Galvanized Steel Strips, Galvanized Steel Coils, Galvanized tubes etc) 3)Cold Rolled Steel (Cold Rolled Steel Strips, Cold Rolled Steel Coils, Cold Rolled Sheets etc) 4)Stainless Steel (Stainless Steel Strips, Stainless Steel Coils, Stainless Steel Wire, Hardened and Tempered Spring Steel, Stainless Spring Steel, Spring Steel Wires etc) 5)Steel Tube and Pipes ( ERW, CRW, CRS, Black, Galvanized, Stainless ) 6)Forged Column Clamps, Girder Clamps, Pressed Clamps, Rapid Clamps, Support Clamps & Wedge Clamps. 7)Heavy Duty Props & Light Duty Props. 8)Nuts, Bolts, Nails & Fastners 9)System Scaffolding, Base Plate & Adjustable Base. 10)Steel Tie Rod, Waller Plates and Wing Nuts. 11)Drop Forged and Pressed Sheet Metal Couplers of all types. 12)Steel Billets, Steel Angle & Steel Channels.

Product Description The polish rod clamps are with hinge-joint butterfly structure. The body is made of high grade casting steel and accomplished with subjected heat treatment. The clamps hold the polish rods tightly with force of friction. No any inserts with teeth needed. So damages and cuttings on the polish rod surface can be eliminated. The specifications and main parameters Working tempareature(�C) 350 350 350 Working pressure (MPa) 17 17 17 Sealing temperature (�C) 250 250 250 Connection threads Up:2-7/8NUE down:2-7/8"NUE Up:4-1/2"BCSG,Down:2-7/8NUE Up:4-1/2"BCSG,Down:2-7/8"NUE Certification API 11B Material Alloy steel Processing Type Casting Use Oil production Specification 1", 1-1/8", 1-1/4", 1-1/2", 1-3/4" Function Connect with sucker rod pump and sucker rod Thread type EUE, NUE Surface processing Phosphate electrostatic spraying Types One bolt, two bolt, three bolt clamp Our Services For more information, you can contact me : Looking forward to cooperating with you!

Specializes in manufacturing high quality fasteners such as screws, nuts, bolts, foundation bolts, washers, allen keys, hose clamps, pins, and threaded rods. we utilize materials including stainless steel (201, 204, 301, 304), mild steel, brass, and aluminum.

A steel sucker rod is one of the important equipment of oil field.Can provide seven kinds of the level of sucker rod,including C, K, D, KD, HL, HY andC, K, D sucker rod press design and manufacture standard of API Spec 11 B, KD, HL, HY grade rod design and manufacture according to standard SY/T5029-2006, KH level rod according to standard within the company. Grade C sucker rod is mainly used for light, medium load, no corrosion or corrosion shallow Wells or in deep well pumping, material is carbon steel or manganese steel. Grade D sucker rod is made of high quality alloy steel, after heat treatment with high strength, plasticity is good, long life and other characteristics, it is suitable for light when there is no corrosion or corrosive medium in the deep Wells under the environment of use. Grade H(HLandHY) sucker rod is made of high quality alloy steel manufacturing, have the characteristics of ultra high strength, used in deep well, big strong pump used in production. And K and KD sucker rod with different content of Ni Cr - Ni - Mo high quality alloy steel manufacturing, have anticorrosive, resistance to corrosion function, respectively applicable to strong corrosion of shallow, middle and deep Wells.

We can supply full line of polished rod clamps and other casting parts according to customers' requirements as a professional supplier. All of its technical specifications meet the oil and gas industry standard sy/t5029-2003 and the american petroleum institution api spec 1b standard. It adopts precision casting, normalized thermal treatment and fine process in production, and fully tested after finished production to make it function well in use Packing is finished for international seaworthy

The specifications and main parameters Working Pressure: 1500psi Bottom Thread: 1.3/4 , 2 , 2.1/2 , 3 , 3.1/2 , 4 Bottom Connection: Box or Pin, API Tubing or Line Pipe thread. Material: AISI1045/4130 casting steel or ductile iron Split Cone Packing (rod sizes): 1 , 1.1/8 , 1.1/4 , 1.1/2 and 1.3/4

1. Structure Polished rod stuffing box is made up of cross shell, seal gate valves, sealing pin, sealing cap, rubber packing, etc. The bottom could be connected in thread, flange, clamp. The device could reduce the wear of the polished rod, increase oil recovery. 2. Characters (1). X-MAS tree stuffing box sealing polished rod. (2). Working temperature is < 200�°C. (3). Good chemical durability for oil and corrosive substance (4). Good wearing resistance. (5). Use to prevent the leakage of gas and liquid along a moving rod 3. Installation and usage (1) Before installation, user shall inspect the device comprehensively and clean it. (2) Pay attention to the size of polished rod is conform to the valve specifications. (3) When installation, adjust seal compression force till not leak. If the force is too big, the service lift will decrease. (4) Every time adjust the force, user shall adjust in tiny range.

Features 1.Alloy tool steel which offers good machineability. 2.Excellent polished finish for large section. 3.Supplied in the hardened and tempered condition ready for machining. 4.In this condition it gives excellent wear resistance. Applications 1.Ideally suited for the production of plastic moulds. 2.Die holders, zinc die casting dies, backers, bolsters and injection moulds. 3.Shafts, rails and wear strips. Shape:steel plate/flat bar/round bar Technology:Hot work / Forged/cold drawn Heat treatment:Annealed / Q+T Surface condition:Black/Peeling/Polishing/Machined Delivery condition:Hot rolled or forged, Peeled or black surface Test:UT 100% / S G S Certification:ISO/mill certificate Payment:L/C at sight or T/T

The C-Clamp is used as a bracket to hold the C-38 channel in suspended ceiling applications. It is mainly used for moderate loads, attached to 6 - 8 mm threaded rods. Advantages: Ceiling System

The basic component of a rice rubber polisher is a set of rectangular rods, which polish rice grains effectively and affordably. These polishers make grains of rice that are durable and don't break easily, as well as a brilliant and glittering appearance. Rice rubber polishers come in a variety of grades, depending on which one best suits the production and processing methods. It will give you top-notch outcomes and prevents the grain from breaking down quickly. Additionally, it aids in the optimization of the costs to production ratios. The quality of the grains can be improved and maximised with the aid of a suitable rubber polisher. It facilitates numerous procedures and polishes rice. SIZES Our group manufactures several types of rubber polishers for polishing rice, and they are typically composed of natural rubber. 16 1 18 1 1 18 1 2 18 2 2 20 2 2 22 2 2 24 2 2

Model Number:JH-003 Product name: electric pull hoop/ pole band clamp Brand Name:Jinhan Type:M10 M12 M16 standard:GB Fastening diameter:20mm Application:broad Material:carbon steel finish:zinc produce according to customers'drawing and requirement samples available package cartons & pallets according to customers' requirement

Model Number:JH-064 Product name: steel parallel groove clamp Brand Name:Jinhan Type:all Application:broad Material: steel produce according to customers'drawing and requirement samples available package cartons & pallets according to customers' requirement Model Number:JH-076 Product name: aluminum parallel groove clamp Brand Name:Jinhan standard:GB type:JB-0~JB-4 frequency:low screw tolerence:4h material:aluminum product grade:A Application:power line fittings produce according to customers'drawing and requirement samples available