Application: Applied to below 110kv, to treat various unqualified insulating oils, including aging transformer oil, mutual inductor oil, Switch oil and other oils. Features: 1. Highly effective dewatering , degassing by High-Technology-----Duplex 3D stero-evaporation 2. Highly remove particles ability by using the high-Technology------High-molecule absorbing together with Double FH trapezoidal filter element. 3. Liquid level is controlled by infrared 4. Can work independently , also can work with regeneration System. 5. Three Functions: Vacuum Oil filter, Vacuum Oil drying for transformer, Vacuum Oil filling for transformer. or three functions for other power equipments. 6. Automatic Test for the Oil Dielectric Strength & printing the result out 7. Trinity inter locked preventive device to ensure the Security. 8. Can work on line. Various sizes, weight range from 200kg to 1500kg.
Atlas Corporation is a Hazardous Waste Management Company and We serve throughout India, Used Oil in Chennai,Used Oil in Coimbatore, Used Oil in Tirunelveli, Blackoil in Chennai, Used Engine Oil in Chennai, Used Engine Oil in Hosur, Waste Oil in Chennai, Waste Oil in Hosur, E-Waste in Hosur, E-Waste in Chennai, Hazardous waste in Chennai, Hazardous waste in Hosur, Hazardous waste in Tirunelveli, Batteries in Hosur, Batteries in Chennai
Waste oil stove Principe of waste oil stove The release of potential energy of fuel by combustion with air requires several stages, namely. • mixing of air and fuel • ignition of the mixture • chemical reaction Disposal of products of combustion from the reaction site so that fresh reactants are available. Except mixing of air and fuel, all other stages are extremely fast such that it is said that if fuel and air are mixed, fuel is burnt. Accordingly mixing is the slowest step in the process of combustion this can be understood by considering that each mole of carbon theoretically requires 1 mole of oxygen for complete combustion. But 1 mole of oxygen is obtained from 4.76 moles of air. That means 3.76 moles of nitrogen are present with 1 mole of oxygen. Nitrogen is inert and does not take part in combustion therefore mixing of air + fuel is important Carton box
Y3027 waste oil machine Techniques: Tank capacity: 24L Tray capacity: 10L Air consumption: 200L/min Pressure: 1bar 3027 air-operated waste oil, with a pneumatic vacuum generator which can collect the vacuum displayed on the meter directly, and keep a maximum vacuum, can suck the waste oil in a very fast speed. For the pump touching the air only, it will prolong the life of the machine.
3024 Waste Oil Machine Techniques: Draining speed: 0.6-1.6L/min Draining pressure: 1bar Tank capacity: 24L Air consumption: 200L/min It is a manual waste oil equipment. There is a suction equipment completing with a level gauge and 4 suction probes (rigid hose dia. 8 X 700 mm. Flexible hose dia. 8 / 6 / 5 X 700 mm. ). They adaptable to extraction of hot exhausted oil (70/80�° C) through one of the 4 sensors provided from the engine sump of vehicles on the ground. After depressurizing (creating a vacuum inside the tank), it is entirely independent and needn't continuous supply of compressed air (compressor). It has a pneumatic pump which is easy to operate and equipped with a high-pressure valve setting to 0.5bar that ensures absolute safety. The outlet pip, equipped with a terminal elbow, is 1.5 meters. The suction tube (with heat insulated handle) is 1.65 meters. This exhaust extraction equipment can be applied to change the oil of engines, differentials, gearboxes, ect quickly and practically on any vehicle, for example on a lift or over a pit and on the ground. NOTE: You shouldn't extract brake oils, corrosive liquids, fuels, and inflammable liquids.
Model:kv-05 Oil consumption:3-5l/h Output power:35.5-59kw Max.Output heat:20, 000-50, 000kcal/h (80, 000-200, 000btul/h) Outside air compressor:1 unit outside ac is needed about 0.3-0.5cbm/min(5-9l/s) Nozzle:brass siphon 1*1.0mm Tube diameter:114mm Heating pipe:1.0kw Motor power:180w Power supply:220v 50hz/110v 60hz Package size:58*53*42cm G.W.:30kg
The waste oil decolor and reanimate Primary useHD - 1 series multi-function is a high-efficient decolorizing huadu long gold machinery equipment co., LTD., the latest patent product (patent no. 200920090989.4), in addition to containing series vacuum filter oil machine at home and abroad all function, also have decolorizing, regeneration, and other functions. Applicable to the cement, chemical fertilizer, chemical, petroleum, metallurgy, mining, power, shipbuilding, machinery, military industry, rubber, instrumentation, transportation, building materials, paper and other industries of all kinds of liquid and solid waste oil regeneration process. Especially for oil serious aging, the phenomenon such as color change after the purification treatment equipment, can achieve or close to the country's new oil standards, fully meet the use requirements of the recovered oil. HD - 1 series multi-functional efficient decoloring to life again by chemical treatment system, oil and water separation system, break emulsion separation system, decoloring regeneration system, the cooling system, filtering system and electric control system, etc. It is not only suitable for the reproducing and decoloring reduction of the low grade oil combustion engine. It can also deal with other kinds of waste oil regeneration and decoloration (such as degraded transformer oil, switching oil, insulation oil, sewing machine oil, etc.).Second, characteristic introduction 1, this equipment adopts the physics, chemistry, elimination of waste oil in polarity between micro particle charge, make them together into larger particles surface impurities by precipitation, the glue and removing oil, asphalt, and various compounds. At the same time through the exhaust cleaner and vacuum dewatering, degassing effect, remove the harmful gas and water, can not only remove the inferior oil in the acidic ingredients, suspended substance, precipitation, and make inferior oil regeneration. 2, use a special kind of renewable cleanser and make the processed oil does not damage the basic composition and the oxidation resistance, oil to meet the new standards, at the same time improve the performance of the insulation of the equipment and safety. The equipment is equipped with advanced hydraulic magnetic automatic control system, which completely solves the oil pump and running oil in the oil filter. Additionally, there is an advanced pressure automatic controller, which can automatically stop when the equipment overpressure and prevent the machine
DSF series Cooking Oil Recycling Filter Machine provides an eco-friendly, mobile onsite purification for waste vegetable cooking oil, it can remove water, impurities, odor, acidity, color etc and extend the quality of the oil. DSF Cooking Oil Recycling Filter Machine uses disposable carbon, paper or stainless steel filter. They are easy to assemble, easy to use, and easy to clean. It allows operators to produce better fried food. By extending the life of oil, DSF Cooking Oil Recycling Filter Machine also help customers reduce costs Features: 1. Vacuum-based cleaning of deep fryers and full fryer management. 2. Stretching oil usage by 20%–50% with DSF Cooking Oil Recycling Filter Machine. 3. Using filtration system is an extremely functional extension to any frying system. 4. With Cooking Oil Recycling Filter Machine, customers quickly benefit through longer and more consistent shortening life and reducing waste.
With the avantages of being compact in structure,simple in operation,convenient in maintanance and low in application cost,the series are new necessary products used in power mining enterprises,especially when their oil are used in electric equipments,such as transformer,mutual inductor and switch. The purifier can remove free water,free air and particulate contamination,and can make the filtered oil reach or be closed to the standard of the new oil.The product could also be operated together with BJ series to treat aging and waste oil,so it is assistant without doult. Features of Product 1. Simple in operation,convenient in moving and high efficient in oil treatment. 2. As the new technology, vacuum-segregating (Patent No. ZL200420061085.6) employs particular spinning disk and stainless steel machine with dehydration and air pump and enlarges the area of segregating and coming to three-dimensional evaporation so that obtain the enough time to boil away. In this way purifier could achieve the best effect. 3. Using new type of heating equipment (Patent No. ZL02276238.8), it can reduce heating burthen and extend oil life. 4. Oil level control adopt photoelectric way which the main components is imported from Switzerland and have features of sensitive control, exactitude so much as feel the spume of oil. Spurting oil phenomena is never appeared. 5. With advantages of no leakage,low noise and long using life, this series of products adopt special input-oil pump which be airproofed by our factory. 6.In order to meet customer's needs of choosing right filter, we have scientific design and exact filter assemblies which could exchange by ones abroad. Both cost and oil disposal effect are good. veneer case
Waste oil usually collected from machinery, vehicles, ships etc. which color is black and very dirty. Because the waste oil contains too much contamination, including non-hydrocarbon, alkene, polycyclic aromatic hydrocarbon, metal hydronium, impurities, metal particles, asphaltene and colloid etc. thereby it is harmful for the lubricating system and car engine etc, waste oil lost itâ??s control friction which have to be replaced. Transitional way to recycling the waste oil is by acid way, which will produces much waste sludge, bad smell, non-friendly environment, and the produced base oil is not purity, and it is easily oxidized. Many countries forbid the acid way. So our company researches the new waste oil vacuum distilling machine (JZC waste oil distillation machine), it is special for distilling and regenerating the black waste lube oil, including waste engine oil, lube oil, hydraulic oil, gear oil, dirty diesel oil, mixed oils etc. This equipment adopts physicochemical way to polymerize, passivity, absorb, eliminate impurities and harmful contaminations. JZC waste oil distillation machine heat the waste oil to (from 110â?? to 350â??) different temperature under high vacuum condition, making Hydrocarbon molecules break out, and re-order combination, forming diesel oil, lubricating base oil etc. JZC machine is very suitable for the small oil refinery company, also for the small oil company who want to make the oil by self.
Model: AYAN-F100 4 GLASS WIPED FILM MOLECULAR DISTILLATION EQUIPMENT 0.5-6KG/H Overview Hangzhou Ayan provides you with professional R&D and production of molecular distillation equipment, customized service, and turnkey solutions. Application Industrial: Distillation Power source: Electric Process: Vacuum Distillation Place of Origin: Zhejiang, China Processing Rate: 0.5-6KG/H Certification: CE, ISO Voltage: 220V/110V Power (W): 120 Continuous feed so you dont have to break vacuum Short residence time High evaporation rates Low processing temperatures Compact design Cannabinoid separation Automated controls Fully Jacketed for precise temperature controls short path evaporator with an internal condenser, cold trap, discharge systems for distillate and residue, heating and vacuum system. The main glass components are carefully fabricated in Borosilicate glass to allow you to view the concentrates during the distillation process.
waste oil to diesel fuel oil distillation plant which can convert waste engine oil, waste tyre oil, waste plastic oil,used motor oil, crude oil, lube oil, black oil into diesel fuel oil.The diesel fuel oil from waste to diesel fuel oil distillation plant can be used in generator,truck ship, tract etc. If you want to know more information about the plant,you can contact us.
Descriptions: Oil consumption: 2 - 3 (kg/hour) Output heat power: 15-35 (kw) Output heat: 15, 000-32, 000(kcal/h) / 60, 000 - 130, 000 (btu/h) Distance from fire gun to flange: 173mm / 6.8 inch Fire gun dia. : 90mm / 3.54 inch Compressed air pressure: 0.05-0.1mpa 220v/50hz & 110v/60hz both available; Package weight: 30kgs / 66lbs Features: 1. Various fuels are applicable, e.G. Used engine oil, used vegetable oil, used crankcase oils, used glycerin, used hydraulic oil, used synthetic oils, waste machine shop cutting oil, Waste mineral spirits solvent, waste grades #1, #3, #4 heating oils, waste mixed heavy oil etc., As well as regular oils, such as diesel, etc. .2. Automatic ignition, workers-nursing unnecessary 3. Flame adjustable freely by air-inlet controller easily; from the ¡¡ãobserving window¡¡à operators can Easily see changes of the flame. 4. All parts tested thousands of times and improved to be of good quality and reliable. 5.All errors readable from the front panel, thus sky burner is just ¡¡ãsmart burner¡¡à! 6. Complete fuel burning ensures very low emissions, reducing pollution as much as possible. Environmentally ¡§cfriendly, exhausting air complies with the requirements of euro iii; 7. Big oil tank optional, as big as 100l container for holding waste oil, pumping system is held At the top topump waste oil into burner machine; at the same time hold the burner machine during Shipping from damage; 8. There is heating instrument at the bottom of big oil tank to pre-heat fuel before pumping, Esp. Considerate for using in cold area. 9. Double safety design for pc program. Export standard packing 27kg
24tons flexibag for waste oil 1.16-24kl 2.Multilayers 3.Butterfly valve or ball valve 4.With insurance Blt flexibag spec and advantage 24tons flexibag for waste oil Blt flexitank is an ideal product for storage and transporting all kinds of non-hazardous liquids and chemicals by sea, railway and road. It can be put into a 20ft dry container. Flexitank construction 1) single layer and multi layers high strength ldpe/hdpe film 2) out layer pp for flexitank 3) alternative 2" or 3" butterfly valve & ball valve for flexitank 4) automatic air vent to release air pressure in flexitank, and also used for sampling Flexitank type(flexible) 1) top loading & discharging flexitank 2) bottom loading & discharging flexitank 3) top loading & bottom discharging flexitank Flexitank accessories: 2¡¡à and 3¡¡à camlock Safety pin added on flexitank valve(patented design) Heating pad for discharging easy-crystalized liquids like honey, syrup, palm oil and animal oil etc from flexitank Packing capacity in containers(20" & 40"): Cargo/container 20" 40" Flexitank only 100 pcs 220 pcs Flexitank with accessories 56 units 120 units The features of our flexitank(food grade) 1) quality management system: iso9001:2000, iso22000 supervision 2) japanese food grade approval 3) flexitank films fully comply with us fda , european ec, and kosher regulation
Application NSH GED Black Oil Distillation Systems are able to regenerate a variety of used oil, engine oil, transformer oil, gear oil, hydraulic oil, washing oil, rubber oil, etc. After the distillation treatment, vacuum treatment and regeneration treatment through GED system, you can get base oil of good quality and a small amount of gasoline and diesel oil. Edges of GED Vacuum assisted distillation and gaseous hydrocarbon diversion technology Heating system Highly automated control Perfect equipment protection system The structure of the whole machine is simple and easy to maintain and repair, with beautiful appearance.
Collecting waste oil machine Y3197 Pneumatically pump the speed of oil: 0.6-1.6L/min Connects the height of oil: 1.9m Pot body: 80L Tray: 10L Cup amount: 10L These exhaust extraction equipments are appliances to change the oil of engines, differentials, gearboxes, ect...Quickly and practically on any vehicle on a lift or over a pit and on the ground. Brake oils, corrosive liquids, fuels, or infiammable liquids in general must not be extracted.
Collecting waste oil machine Y3197 Pneumatically pump the speed of oil: 0.6-1.6L/min Connects the height of oil: 1.9m Pot body: 80L Tray: 10L Cup amount: 10L These exhaust extraction equipments are appliances to change the oil of engines, differentials, gearboxes, ect...Quickly and practically on any vehicle on a lift or over a pit and on the ground. Brake oils, corrosive liquids, fuels, or infiammable liquids in general must not be extracted.
Model:kv-10 Oil consumption:6-9l/h Output power:88-122kw Max.Output heat:80, 000-100, 000kcal/h(320, 000-400, 000btu/h) Nozzle:brass siphon 1x2.0mm Tube diameter:114mm Heating pipe:1.0kw Motor power:180w Power supply:220v 50hz 110v 60hz Outside air compressor:1 unit outside ac is needed about 0.3-0.5cbm/min(5-9l/s) Package size(lxwxh):58x53x42cm Gross weight:30kg
Sino-NSH-GED-WD is a waste oil regeneration system that cracks waste oil to diesel fuel. Sino-NSH-GED-WD adopts the atmospheric distillation technology, also known as cracking technology. During the distillation process, the waste oil is heated to the setting temperature and turns into oil mist, then it passes through the catalyst tower. After sufficient reaction with the catalyst, the oil mist passes through the condensing system to be cooled to liquid diesel. This system can be applied for gasoline motor oil, diesel motor oil, all kinds of engine oil, mineral oil, synthetic oil, transmission oil, hydraulic oil, gear oil and other used black lubricant oils to produce clean diesel oil. Diesel acquired from NSH-GED-WD system meets international standards and can be fully applied to burners, diesel engines, generators, etc. This system is very safe because the temperature setting is rigorous and the machines are stabilization. Our technical team commits to design the most reasonable and high efficient distillation system to realize the profit maximization of the both parties. Recovery rate is above 90% with low operation cost, only 5-6 USD for recycling one ton used oil.
Sino-NSH-GED-WD is a waste oil regeneration system that cracks waste oil to diesel fuel. Sino-NSH-GED-WD adopts the atmospheric distillation technology, also known as cracking technology. During the distillation process, the waste oil is heated to the setting temperature and turns into oil mist, then it passes through the catalyst tower. After sufficient reaction with the catalyst, the oil mist passes through the condensing system to be cooled to liquid diesel. This system can be applied for gasoline motor oil, diesel motor oil, all kinds of engine oil, mineral oil, synthetic oil, transmission oil, hydraulic oil, gear oil and other used black lubricant oils to produce clean diesel oil. Diesel acquired from NSH-GED-WD system meets international standards and can be fully applied to burners, diesel engines, generators, etc. This system is very safe because the temperature setting is rigorous and the machines are stabilization. Our technical team commits to design the most reasonable and high efficient distillation system to realize the profit maximization of the both parties. Recovery rate is above 90% with low operation cost, only 5-6 USD for recycling one ton used oil.
