Constant angle, constant torque micro step driver, the drive voltage of which is from 12V to 40VDC. It is designed for use with 2 phase hybrid stepper motor of all kinds with 42mm to 57mm outside diameter, 6, 8 leads, regulated phase current from 0.5A to 3A. The unique control circuit that it adopts can reduce motor¡¯s noise, make motor run more smoothly, improve motor's performance by 30% at high speed, reduce driver¡¯s heating by 50%. It is widely used in small size of numerical control devices with higher resolution such as carving machine, laser labeling machine, inner laser curving machine and etc. FEATURES * 4 channels constant angle and constant torque micro step, highest micro step: 64 * Highest response frequency: 200Kpps * Current of winding will be reduced by approximately 50% when no step pulse command is received for 0.1 second * Bipolar constant current chopping mode * Opto-isolated signal I/O * Drive current is continuously adjustable from 0.5A/phase to 3A/phase * Single power supply voltage from 12V to 40VDC.
The DVS278 is full digital 2 phase stepper driver based on DSP control. The drive voltage of which is from 24V to 80VDC. It is designed for use with the 2 phase hybrid stepper motor of all kinds with 57mm to 86mm outside diameter, regulated phase current from 2.0A to 7.2A. The highest micro step is 40000ppr. It is widely used in small size numerical control devices such as curving machine, packing machine, CNC and etc. FEATURES * 16 channels constant angle, constant torque micro steps, highest micro step: 40000ppr * Highest response frequency: 200Kpps * Current of winding will be reduced by approximately 50% when no step pulse command is received for 1.5 second * Opto-isolated signal I/O * Drive current is adjustable in 16 channels from 2.0A/phase to 7.2A/phase * Single power supply from 24V to 80VDC.
The DVS2811 is full digital 2 phase stepper driver based on DSP control. The drive voltage of which is from 40V to 110VAC. It is designed for use with the 2 phase hybrid stepper motor of all kinds with 57mm to 110mm outside diameter, regulated phase current from 0.5A to 8.0A. The circuit that it adopts is similar to the circuit of servo control which enables the motor run smoothly without noise and vibration. The highest micro step is 40000ppr. It is widely used in small size numerical control devices such as curving machine, packing machine, CNC and etc. FEATURES * 16 channels constant angle, constant torque micro steps, highest micro step: 40000ppr * Highest response frequency: 200Kpps * Current of winding will be reduced by approximately 50% when no step pulse command is received for 1.5 second * Opto-isolated signal I/O * Drive current is adjustable in 16 channels from 0.5A/phase to 8.0A/phase * Single power supply from 40V to 110VAC * Phase terminal memory function (motor phase terminal is memorized after input pulse train stopping 3s and it is recovered when stepper driver power on or signal MF changes from low level to high level).
The DVS368 is full digital 3 phase stepper driver based on DSP control. The drive voltage of which is from 24V to 80VDC. It is designed for use with the 3 phase hybrid stepper motor of all kinds with 57mm to 86mm outside diameter, regulated phase current from 2.5A to 6.2A. The highest micro step is 60000ppr. It is widely used in small size numerical control devices such as curving machine, packing machine, CNC and etc. FEATURES * 16 channels constant angle, constant torque micro steps, highest micro step: 60000ppr * Highest response frequency: 200Kpps * Current of winding will be reduced by approximately 50% when no step pulse command is received for 1.5 second * Opto-isolated signal I/O * Drive current is adjustable in 16 channels from 2.5A/phase to 6.2A/phase * Single power supply from 24V to 80VDC * Phase terminal memory function (motor phase terminal is memorized after input pulse train stopping 3s and it is recovered when stepper driver power on or signal MF changes from low level to high level).
The DVS3722 is full digital 3 phase stepper driver based on DSP control. The drive voltage of which is from 110V to 220VAC. It is designed for use with the 3 phase hybrid stepper motor of all kinds with 57mm to 130mm outside diameter, regulated phase current from 1.3A to 7.0A. The circuit that it adopts is similar to the circuit of servo control which enables the motor run smoothly without noise and vibration. The highest micro step is 60000ppr. It is widely used in middle and big size numerical control devices such as curving machine, CNC machine, computer embroider machine, packing machine and etc. FEATURES * 16 channels constant angle, constant torque micro steps, highest micro step: 60000ppr * Highest response frequency: 200Kpps * Current of winding will be reduced by approximately 50% when no step pulse command is received for 1.5 second * Opto-isolated signal I/O * Drive current is adjustable in 16 channels from 1.3A/phase to 7.0A/phase * Single power supply from 110V to 220VAC * Phase terminal memory function (motor phase terminal is memorized after input pulse train stopping 3s and it is recovered when stepper driver power on or signal MF changes from low level to high level).
Model Number 35 39 42 57 86 110 Length/Side (mm) Height (mm) Step Angle (deg.) 0.9 /1.8 Drive Voltage (v) Rated Current/Phase (ma) Winding Resistance (Ohm)
Brand: longsmotor Model: 17hs3404n Step angle: 1.8 degrees motor length: 34mm Current: 0.4A Static distance: 0.32n.m Number of leads: 4 Weight: 0.22kg
Specifications 1)ce and rohs approved 2)quality system: ts16949.
Model:42hs¨º¡ì110bygh 1.8㨺© Price:0 Step accuracy--------- 5% Temperature rise--------80æ max Ambient temperature range-----20æ~+50æ Insulation resistance-----100m|¸min.500vc dc Dielectric strength-----1800v ac 1s 5ma
Vid23 is a precise stepping motor of patent design. It is specially designed with transparent pointer shaft, pointer lumination intensity is superior to tranditional way. It also bring cost reduction in saving number of leds. Vid23 with a gear reduction ratio of 1/180. Its mainly used in dashboard instrumentation or other digital indicator equipments, to transfer digital signals directly and accurately to analog display output. Vid23 is driven by 2 sequent logic pulse signals. It can be driven in 5v ~ 10v providing shaft stepping angle resolution 1/12. The pointer can move with a speed more than 400hz. 1000pcs/ctn, gross weight 10.5kg, 430*314*478mm
Hybrid Stepping Motor(110BYGH) Features: Model: 110BYGH99-001; 110BYGH150-001; 110BYGH202-001 Step angel ( íp) : 1.8 Motor Length L(mm): 99/150/201 Rate Voltage (V): 4.95~5.44 Rate Current (A): 5.5~8 Phase Resistance ( ª+ ): 0.67~0.9 Phase Inductance (mH): 12~15 Holding Torque (N.m): 11.2~28 Lead Wire (NO.): 4 Rotor Inertia (g. c¬O): 5.5~16.2 Detent Torque (kg.cm) 5~11.7 Motor Weight (kg): 5~11.7. 110mm,5-11.7kg,28n-m.
Modelú¦85BYGH450A-001ú+85BYGH450A-002 ú+85BYGH450B-002ú+85BYGH450B-004ú+85BYGH450B-00885BYGH450C-001ú+85BYGH450C-012ú+85BYGH450D-002ú+85BYGH450D-007 Step angel ( íp ): 1.8 Motor Length L(mm): 75~151 Rate Voltage(V): 1.9~7.8 Rate Current (A): 2~6 Phase Resistance ( ª+ ): 0.43~3.9 Phase Inductance (mH): 2.5~22 Holding Torque (N.m): 2.1~9.3 Lead Wire (NO.): 4/8 Rotor Inertia (kg. c¬O): 1.4~3.6 Motor Weight (kg): 2.3~5. 85mm,9.3n-m.
Stepper motor drive -Bipolar Motor Drive -Microprocessor based Design -Operating Voltage up to 80V DC -Programmable Motor current up to 8A -Up to 64 Microsteps - Selectable through DIP Switch -Microstepping for Smooth Operation Carton Box
Byj series stepper motor Model 35BYJ46 Rated voltage 12VDC Number of Pole 4 Speed Variation Ratio 1/85.25 Stride Angle 7.5fp /85.25 DC resistance 130ohmf+7%(25k) Idle In-traction Frequency >500Hz Idle Out-traction Frequency >800Hz In-traction Torque >78.4mN.m(120Hz) Self-positioning Tor >39.2mN.m insulated resistance >10ohm(500V) insulated electricity power 600VAC/1mA/1s Insulation grade A Rise in Temperature
Product model: 17HS3401S-PGXXX Stepper motor length: 34 mm Shaft size: "D" shaft 16x8mm Motor lead: plug Including connection: 1M double dot line Gear reducer ratio Gearbox model: 3.71-1 5.18-1 14-1 19-1 27-1 51-1 Decrease: 3.71 5.18 14 19 27 51 Transmission length: 29 29 37 37 37 45
- High Torque Density - High torque to inertia for quicker start and atops. - Ruged design and long life bearing. - Holding torque up to 300 kg-cm. - Smallest frame size. Applications Printing Machines Coding, Marking Machines Packaging Machines CNC Machines Labelling Machines Diamond Machines SPM also. As per motors specification sheet.
S series 2-quadrant bldc speed driver ¡ôspecification: S series is simple compact speed driver with fixed parameters and pi Close-loop. The reference can be 0-5v analog voltage or 0~100%pwm. Also it can be 0~3khz frequency by adding a f-v unit on pcb. Motor's r and easy use. control functions of f/r enable, brake, speed reference and output functions of speed pulse (pg), alarm three kinds of reference inputs:analog voltage, pwm, frequency suitable for 3-phase bldc motors with hall sensors use of industrial grade chips
Stepping motor driver cw250 Technical data: 1. Input voltage: 20 ½ 40vac or 24~60vdc 2. Phase current: adjustable from 1.5a to 5a 3. Running mode: 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256 steps 1/5, 1/10, 1/25, 1/40, 1/50, 1/100, 1/200 steps 4. Protection mode: overheat, overpressure and overcurrent protection 5. Overall dimension: 150mmß98mmß45mm 6.Weight:
The various types are Nema23 stepper motor, nema24 stepper motor, servo motor, nema17 stepper motor. Application in lane diverters, elevators, and conveyor belts
NEMA 34 CAN Closeloop 10N.m Integrated Stepper Motor Our drivers and controllers can be installed on the rear cover of NEMA17/NEMA23, It will simplify the design of integrated stepper motor. User can install the encoder to achieve open-loop control. The process of assembly is simple and flexible. It just require few connecting lines, and more space is saved. It is easy to distribute control and remote monitoring for users. As shown in the following figure, PMC006B4 controller is installed on the rear cover of NEMA17. The noise and vibration under low speed is slight. Stepper motor + PMC007C6SE driving controller + encoder Compact structure, saving complicated wiring, saving space High-precision, close-loop control with encoder Accurate positioning, recording step position, without losing step Easy to install, easy to distributed control, support a variety of control metho
