EN590 low sulphur price is $-NEGOTIABLE discount from Platts NWE ARA I'''ll provide procedure of seller refinery by email. Procedures of refineries are fair and easy and the seller can meet the buyer after the buyer confirms their acceptance of the procedure.
Commodity: Jet Fuel A1 Origin: Non-Sanctioned Quantity: 4 Million Barrels Price: 84 USD Gross Commodity: En 590 10 PPM Origin: Non-Sanctioned Quantity: 200.000 MT Price: 560 USD Gross VOPAK TO VOPAK PROCEDURE 1. Buyer Sends CIS with the purchasing product to Seller through Seller's Mandate for verification: 2. Seller Company assigned Vopak Botlek Europoort Terminal Manager to buyer. 3. Buyer finalize the Vopak Botlek Europoort protocals through the Vopak Botlek Europoort Terminal Manager, obtain the following and submit the same to seller company as listed below. * Vopak Botlek Europoort Barcode - Vopak Botlek Europoort Registration information. * Exact name and reference of their Vopak Botlek Europoort account. �¢?? 3b. Format of Authorization Form to accompany the information. LETTER OF AUTHORIZATION: We, (Buyer Name), with registered Office, at (Address). represented by Mr. ________________, with Passport number ________________. Owner of tanks at Royal Vopak Rotterdam, with contract reference number: _____________. 4. Seller Company sends Cl for Buyer's endorsement. Buyer sign the CI and return back within 24 hours of receiving alongside side with Vopak Botlek Europoort Barcode and Sign Letter of Authorization. 5. Seller Company gives Buyer Full POP documents along with fresh SGS (less than 48 hours onetime official confirmation mail from SGS official). * Fresh SGS Report or Saybolt (Not later than 24 - 72 hours) * Tank Storage Receipt (TSR) with GPS Coordinates of where the Tanks/Vessel are located. * Injection Report Agreement * Authorization to Sell * Authorization to verify the product in the tank (ATV) * Country Certificate of Origin * Approved Dip Test Authorization (DTA * Availability of Product, * Commitment to Supply, 6. After verification of full POP by buyer, injection begins. 7. Upon completing the Injection, seller Company transfers title to buyer. 8. Buyer makes full payment after via MT103, seller Company pay commission to the intermediaries
Fresh vegetables, fresh products: orange, potatoes, yellow onion, red onion, fresh garlic, dry garlic, dry white beans, pomegranate, intermediation for diesel en590, jp54 aviation jet fuel a1, d6 diesel oil , d2 diesel oil, lpg, lng, automotive gas oil (ago) intermediation for sugar icumsa 45, yellow corn, wheat.Intermediation for diesel en590, jp54 aviation jet fuel a1, d6 diesel oil , d2 diesel oil, lpg, lng, automotive gas oil (ago) intermediation for sugar icumsa 45, yellow corn, wheat
Diesel En590 10-50-500-5000 And Others Ppm Ultra Low Sulphur. D2 0,2-62 Gost 305-82 Or 0,01 Or 0,05. D2 Automotive Fuel Oil (ago). D6 Virgin Fuel Oil. Hsd Diesel High Speed 500ppm En90. Diesel En590 Euro4 Gost 52368. Pms Premium Motor Spirit Jp54 (ts1) Gost 10227-86. Jet Fuel A1 Gost 10227-86. Marine Fuel Oil Cst 180-280-380. Espo (siberia Pacific Oil) Crude Oil Api 34,7. Lco (light Cycle Oil). Mazut Mt100 Gost 10585-75 And 10585-99. Rebco Gost 51 858-2002/9965-76 Api32/crude Oil 39-1623-93. Lpg 50/50 Propane/butane - 70/30 P/b. Lng 5542-87 By Iso Containers Etc. Gasoline All Types (87-89-92-95). Bitumen/asphalt All Grades. Fertilizers Urea, Dap, Etc Product Description : Petroleum products are materials derived from crude oil (petroleum) as it is processed in oil refineries. ... These fuels include or can be blended to give gasoline, jet fuel, diesel fuel, heating oil, and heavier fuel oils.. Price of product ( USD price or FOB price) : 20.000 MT monthly market price. 100.000 MT monthly market price Less 5%. Product origin : Russia and Non Russia Key Specifications/Special Features : All types/grades of Fuels, Gas, Oil are available for supply. Many commercial names for oils, fuels, gases, etc. are used in the market. To avoid misunderstanding basic details of specifications needed by buyer are mandatory. Specifications for types/grades of products (special grade needed by buyer) will be issued after received your credible purchase request in the form LOI/ICPO docs. Minimum Order Size and Packgaing details : Bulk in tanker vessels. Tanks 20 MT.
Bonny light crude oil (blco), yemen light crude oil, jet fuel, diesel d2, d6, mazut, base oil, gasoline, cocoa bean and powder, petroleum products, coal, diesel, bitumen, petcoke, aluminum, hms, charcoal, wheat, sugar, milk, soybean, corn, beef, chicken, flour, meal, rye, frozen vegetable, okra, french fries, etc..Procurement, exporter
Available products: JET A1/JP54, CRUDE OIL, D2, D6, EN590, DIESEL 10PPM & 50PPM, BITUMEN, MAZUT M100, Copper. Safe procedure and long-term cooperation - that is our motto. As an experienced team based in Berlin, with direct contacts to refineries and direct clients, I and my team ensure a smooth procedure. For us, the customers are the focus of everything we do. To be successful, we need to know what our buyers need. We want to ensure that we offer our buyers added value with our solutions. We meet our commitments and meet our deadlines and goals. Send us LOI so that we can start processing the order. If you have any questions please do not hesitate to contact us! Available products: -JET A1 -JET JP54 -Diesel D2 Automotive, -EN590 10 PPM, -Diesel D6, -Diesel 10PPM & 50 PPM. -Mazut M100 -Bitumen -Crude Oil -Copper
- Commodity: Diesel Fuel EN590 (10PPM), JET FUEL A1 - Origin: Kazakhstan I let the buyer deal directly with Refinery (Seller). Buyers can trade with FOB TTT Rotterdam, FOB TTT Houston, and Refinery, which can trade CIF. Please contact me only if you are interested in real buyers.
Oil & gas products, en590 diesel, jet fuel a1, d6 virgin fuel, petcoke etc, petroleum products, metal commodities like copper cathode & aluminium ingots.Brokering services
PETROALLIANCE diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS.
PETROALLIANCE diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS.
CI DIP AND PAY FOB TTT Rotterdam PROCEDURE 1. Buyer sends ICPO, Company Profile along with current and valid TSA company registration certificate+ buyer passport number + company profile to seller on receipt of seller's soft corporate offer. 2. Seller issues commercial invoice of the product in tanks at the port of Rotterdam and returns commercial invoice. 3.seller will provide the Proof of Product (PPOP) documents for product verification Which include ï?¼ Tank Storage Receipt (TSR) ï?¼ Certificate of origin ï?¼ Statement of Product Availability, ï?¼ Authorization to Verify (ATV), and ï?¼ Dip Test Authorization (DTA) Letter. 4.After successful verification of the PPOP, the buyer will contact the seller's Tank Storage Company to request a 1-day payment invoice to enable Buyer obtain all the necessary authorization and clearance for a Dip Test schedule. *Or* Buyer must have a minimum of 10 days TSR to avoid one day tank extension. 5.Upon a successful Dip Test conducted in the seller's tanks, the buyer will make the payment for the total product cost based on the SGS Report via MT103. The seller will transfer title ownership to the buyer and send all exportation documents. The buyer can then either transfer the product into a vessel or take over the seller's tanks for further storage. 6. Upon a successful Dip Test conducted in the seller's tanks, the buyer will make the payment for the total product cost based on the SGS Report via MT103. The seller will transfer title ownership to the buyer and send all exportation documents. The buyer can then either transfer the product into a vessel or take over the seller's tanks for further storage. 7. All intermediaries involved in the transaction will sign a Non- Circumvention, Non-Disclosure Agreement (NCNDA) and International Master Fee Protection Agreement (IMFPA). These documents will be forwarded to the seller for endorsement, and the seller will provide the Endorsed NCNDA/IMFPA and Authorization to Sell and Collect (ATSC).
* Quantity MIN 50,000MT x 12 months * Origin: German Origin Specifications: The products are in accordance with the specifications requested by The Buyer or presented by The Seller. * Payment: By MT103/760 * Price/Commissions: Final price to Buyer is the Gross, including all commissions. * Payment is then made by Seller, who carries out all commissions transfers. *Contract: 12 Months with possible rollovers. * Inspection: SGS or similar * CIF SBLC PROCEDURE - Summary of our procurement process:- 1. Buyer issue an RFP (Per attached template -w- specification sheet) 2. We issue a commercial offer with all relevant tacit data 3. Buyer returns signed commercial offer in conjunction with a Banker Signed RWA letter (Verbiage will be attached in the commercial offer) 4. Seller issues the Sales & Purchase Agreement 5. The Contract is formalized and lodged with respective bankers 6. Buyer's Banker issues a Pre-Advice MT799 7 Seller issues the Price Lock Notice (a discount is set on this day per the Platts Assessment of the day) 8. Buyer Banker issues the collateral (MT760) 9. Seller's Banker issues 2% Performance Bond 10. Seller charters the vessel/barges 11 Seller berths the vessel/barges 12. Seller loads the vessel/barges 13. Seller issues Product & Shipping Documentation (Digitally AND via courier) 14. Vessel/Barge departs for destination
Refined/produced In Germany, Not Re-documented - Min. Qty Is 50,000 Mt For All Products Except Jet Fuel With Min. Qty Of 2m Bbl And Min Contract Period Is 12 Months. Ship To Ship Transfer (Sts) Procurement Process 1.1. The Seller Issues A Commercial Offer. - The Commercial Offer Exhibits Information Such As Specific Prices, Volume, Load/discharge Ports, Delivery Timeline, Product Specifications, Etc. 1.2. The Buyer Formalizes And Returns The Commercial Offer In Conjunction With A Banker Signed Ready Willing And Able (Rwa) Letter Stating, The Banker Shall Issue A Collateral Instrument On Behalf Of The Buyer. 1.3. The Seller Issues An Authorization To Verify (Atv), Which Is Transmitted Between Bankers. -the Atv Is To Validate/confirm The Sellers: A) Liquidity. B) Hydrocarbon Trading Experience. 2. Sales Agreement 2.1. The Seller Issues The Sales & Purchase Agreement. -the Sales & Purchase Agreement Exhibits Information Such As Price, Index Discount, Volume, Load/discharge Ports, Delivery Timeline, Product Specifications, Banking Coordinates, And Other Tacit Data. -the Delivery Timeline Is Contingent On The Volume, Load/discharge Ports, And Vessel Availability. 3. Formalization/banking 3.1. The Buyer Formalizes And Submits The Sales & Purchase Agreement Within (3) Business Days. 3.2. The Sales & Purchase Agreement Is Lodged With The Buyer's And The Seller's Bank. 3.3. The Buyer's Banker Transmits A Pre-advice Via Swift Mt799. 3.4. The Buyer's Banker Transmits The Collateral Instrument Via Swift Mt760. 3.5. The Seller's Banker Issues A 2% Performance Bond. 4. Loading/documentation 4.1. Subsequent To The Validation Of The Collateral Instrument, The Seller Loads The Vessel (At Own Expense) And Issues The Product & Delivery Documentation. -product & Delivery Documentations Are Submitted Digitally And Via Courier When Created. Documentation Comprises Of, But Is Not Limited To, Charter Party Agreement, Vessel Questionnaire 88, Vessel/product Insurance Policy (Lloyds), Commitment To Supply/commercial Invoice, Statement Of Product Availability/certificate Of Origin, Bill Of Lading/cargo Manifest, Ullage Report, Certificate Of Quality, Notice Of Readiness/eta To Destination, Etc. -the Buyer May Track And/or Communicate With The Vessel At Their Convenience. 5. Delivery/injection 5.1. Per Standard Shipping Protocols, The Shipper Contacts The Buyer Within A 48-hour Arrival Date/time. 5.2. The Seller Issues The Authorization To Board (Atb) And The Dip Test Authorization (Dta). 5.3. The Buyer Executes An Mt103 Wire Transfer Subsequent To The Quality/quantity Inspection And In Accordance To The Final Invoice. 5.4. The Seller Transfers The Certificate Of Ownership (Title) Subsequent To The Receipt Of Payment. 5.5. Injection Process Commences. [fuel Is Injected Into The Buyer's Vessel(S)]
CIF Procurement Process - Min. Qty is 50,000 MT for all products except Jet Fuel with Min. Qty of 2M BBL and Min Contract Period is 12 months. 1.1. The Seller Issues A Commercial Offer. - The Commercial Offer Exhibits Information Such As Specific Prices, Volume, Load/discharge Ports, Delivery Timeline, Product Specifications, Etc. 1.2. The Buyer Formalizes And Returns The Commercial Offer In Conjunction With A Banker Signed Ready Willing And Able (Rwa) Letter Stating To Issue A Collateral Instrument On Behalf Of The Buyer. 2. Sales Agreement 2.1. The Seller Issues The Sales & Purchase Agreement. - The Sales & Purchase Agreement Exhibits Information Such As Price, Index Discount, Volume, Load/discharge Ports, Delivery Timeline, Product Specifications, Banking Coordinates, And Other Tacit Data. - The Delivery Timeline Is Contingent On The Volume, Load/discharge Ports, And Vessel Availability. 3. Formalization/banking 3.1. The Buyer Formalizes And Submits The Sales & Purchase Agreement Within (3) Business Days. 3.2. The Sales & Purchase Agreement Is Lodged With The Buyers And The Sellers Bank. 3.3. The Buyers Banker Transmits A Pre-advice Via Swift Mt799. 3.4. The Buyer's Banker Transmits The Collateral Instrument Via Swift Mt760. 3.5. The Seller's Banker Issues A 2% Performance Bond. 3.6. Within 7 Days Of Verification Of The Collateral Instrument, The Seller Issues A Specially Curated Insurance Policy From Llyods Of London For 110% Of The Value. 4. Loading/documentation 4.1. Subsequent To The Validation Of The Collateral Instrument, The Seller Loads The Vessel (At Own Expense) And Issues The Product & Delivery Documentation. Product & Delivery Documentations Are Submitted Digitally And Via Courier When Created. Documentation Comprises Of, But Not Limited To: 1. Charter Party Agreement 2. Vessel Questionnaire 88 3. Vessel/product Insurance Policy (Lloyds) 4. Commitment To Supply 5. Commercial Invoice 6. Statement Of Product Availability 7. Certificate Of Origin 8. Bill Of Lading 9. Cargo Manifest 10. Ullage Report 11. Certificate Of Quality(Sgs At Origin) And Notice Of Readiness 12. Eta To Destination, Etc. The Buyer May Track And/or Communicate With The Vessel At Their Convenience. 5. Delivery/discharge 5.1. Per Standard Shipping Protocols, The Shipper Contacts The Buyer And Target Harbormaster Within A 48-hour Arrival Date/time. 5.2. The Seller Issues The Authorization To Board (Atb) And The Dip Test Authorization (Dta). 5.3. Customs Will Accompany The Buyer Per Local Rules. 5.4. The Buyer Executes An Mt103 Wire Transfer Subsequent To The Quality/quantity Inspection And In Accordance To The Final Invoice. 5.5. The Seller Transfers The Certificate Of Ownership (Title) Subsequent To The Receipt Of Payment. 5.6. Shore Tanks Are Injected Per The Harbormasters Directives.
EN590 Diesel is an ultra-low sulfur diesel fuel designed for modern diesel engines. It offers: Minimal sulfur content for reduced emissions. High cetane number for efficient combustion. Enhanced lubricity for engine protection. Cold weather performance. Compatibility with emission control systems. Excellent storage stability. This clean-burning fuel promotes environmental responsibility and optimal engine performance.