Please click here to check who's online and chat with them.

Find Verified Veradel A 301 Nt Solvay Pes Pesu Series Suppliers, Manufacturers and Wholesalers

Jun-05-21
Supplier From Dongguan, GD, China
 
SOLVAY Veradel PES/PESU Series:
Veradel PESU was formerly marketed as Gafone PESU Veradel 3000P, 3100P, 3200P, 3400P and 3600P are polyethersulfone (PESU) powders for dissolving or dispersing into solutions. They can also be ground to smaller particle size or blended with other solid particles. The grades differ by their molecular weights, with 3000P the highest and 3600P the lowest. There is a direct correlation between molecular weight and solution viscosity. PESU offers excellent toughness and outstanding hydrolytic resistance. It resists attack from steam, boiling water, and mineral acids. Cast films or coatings of PESU are transparent and have additional desirable properties including long term thermal stability, excellent metal adhesion and formability and inherent flame resistance. Typical applications include high-temperature coating formulations, membranes, advanced high-temperature composites, and specialty adhesives.
PES/PESU SOLVAY Veradel 3000P

PES/PESU SOLVAY Veradel 3100P

PES/PESU SOLVAY Veradel 3200P

PES/PESU SOLVAY Veradel 3400P

PES/PESU SOLVAY Veradel 3600P



VeradelPESU (polyethersulfone) combines good chemical resistance with a high heat deflection temperature, making it a good fit for baby bottles and other food service applications. This resin is also inherently flame retardant for use in electronic components and testing devices

Key features

Heat deflection temperature of 204 C (399 F)

Good chemical resistance

Excellent electrical properties

Transparent

Typical applications

Automotive lighting

Electrical and electronic components

Baby bottles

Coatings

Cookware

Food service

Low-pressure water filtration membranes

Food and beverage processing membranes

Industrial filtration membranes

We can give discount according to order quantity.
Jun-05-21

Solvay Radel R-5500 Nt Ppsu

$35
MOQ: Not Specified
Supplier From Dongguan, GD, China
 
Radel PPSU
High heat, high impact performance

Radel polyphenylsulfone (PPSU) delivers the highest performance of our sulfone polymers, offering better impact resistance and chemical resistance than polysulfone (PSU) and polyetherimide (PEI).
The high heat resistance and excellent hydrolytic stability of Radel PPSU make it an excellent choice for hot water fittings and medical devices requiring repeated steam sterilization.
Radel R-7000 Series products are specially formulated for use in aircraft interiors and are in compliance with stringent FAA regulations requiring low heat release, low smoke generation and low toxic gas emissions.
Key Features
High HDT of 207C (405F)
Superior toughness and impact strength
Exceptional long-term hydrolytic stability
Better chemical resistance than PSU and PEI
Withstands over 1,000 cycles of steam sterilization without any significant loss of properties
Inherently flame retardant
Transparent
Colorable
Typical Applications
Sterilization cases and trays
Dental and surgical instruments
Medical devices
Aircraft interiors
Airline catering trolleys
Hot water fittings
Plumbing manifolds
Food service trays



SOLVAY PPSU Radel R-5500 NT Natural color

SOLVAY PPSU Radel R-5500 NT15 Bone color

SOLVAY PPSU Radel R-5500 BK937 Black color

SOLVAY PPSU Radel R-5500 GY1137 Grey color

SOLVAY PPSU Radel R-5500 GY1037 Grey color

SOLVAY PPSU Radel R-5500 GY874 Grey color

SOLVAY PPSU Radel R-5500 RD1018 Red color

SOLVAY PPSU Radel R-5500 YL1337 Yellow color

SOLVAY PPSU Radel R-5500 GN1007 Green color

SOLVAY PPSU Radel R-5500 BU1027 Blue color

SOLVAY PPSU Radel R-5500 VT2582 Violet color

SOLVAY PPSU Radel R-5500 BN1164 Brown color

SOLVAY PPSU Radel R-5500 OR1145 Orange color



Packing spec.: 25kgs/ bag


We can give discount according to order quantity.
Dec-26-21
Supplier From Dongguan, GD, China
 
Ultrason pellets are supplied in bags and/or octabins. The bulk density ranges between 700 and 800 g/l. Provided the packaging remains undamaged, Ultrason can be stored indefinitely. Ultrason pellets absorb moisture very rapidly. Therefore, the pellets need to be dried at least 4h at 130 C to 150 C in a vacuum or dry air drier prior to processing.


BASF PES/PESU Ultrason E 2010 HC Resins
Package:
25 kgs/bag

Ultrason BASF Resins Style:
BASF PPSU ULTRASON P3010
BASF PSU ULTRASON S2010
BASF PSU ULTRASON S2010 G4
BASF PSU ULTRASON S2010 G6
BASF PSU ULTRASON S3010
BASF PSU ULTRASON S6010
BASF PES/PESU ULTRASON E1010
BASF PES/PESU ULTRASON E2010
BASF PES/PESU ULTRASON E2010 G4
BASF PES/PESU ULTRASON E2010 G6
BASF PES/PESU ULTRASON E2010 HC
BASF PES/PESU ULTRASON E3010
BASF PES/PESU ULTRASON E2010P
BASF PES/PESU ULTRASON E6020P
BASF PES/PESU ULTRASON E7020P

We can give discount according to order quantity
VERIFIED
Jan-11-22

Fresh / Frozen Sugarcane

$580 - $596
MOQ: Not Specified
Supplier From Ho Chi Minh, Viet Nam
 
- ROC 16 series sugarcane with minimum Brix 20
- Cane has shaved off the silk and cut into pieces of 40-50cm
- Put through a treatment system to eliminate bacteria on the surface of sugarcane
- Packed in 10-20kg PE bags or vacuum-packed PA bags
- Freeze products at -18 degrees C
VERIFIED
Mar-07-18
Supplier From Foshan, Guangdong, China
 
Coaxial Cable Series

75Ohm Muti-Media RG6 (Tri Shield)
PART1RG6TRINo.StructureMaterial
1ConductorBC/CCS(1.02mm)
2DielectricFPE(4.57mm)
31stShieldAlFoil(100%,Overlap>2mm)
42ndShieldBCorALBraiding(60%)
53rdShieldAlFoil(100%,Overlap>2mm)
6JacketPVC/PE(7.62mm/0.30")

PART2UTPCAT5E1ConductorBaresolidcopper
2InsulationColourcodedPE
3waterprooftapeOptional
4PolyesterOptional
5RipcordOptional
6JacketLeadfreePVCorLSZH

Note: Other specification can be made upon customer requirements.

DielecticAdhesion>20N/5cm
BreakingStrengthofMessenger1.30mm82kgf;1.83mm166kgf
Impendence75±3Ohm
Capacitance50±3.0nf/KM
VelocityofPropagation83±2%
Shielding55MHzâ?¥60dB
Effectiveness300MHzâ?¥70dB

1000MHzâ?¥70dB

ReturnLoss(100%swept)1~470MHzâ?¥22dB
470-1000MHzâ?¥20dB
1000~2200MHzâ?¥18dB


Application:
Videomonitoring,
Radiosignalcontrol,
CATV,CCTV,
telecommunication,
transmissionsystem,
communicationsystem,
controlsystem.

DeliveryDay:20daysafterreceivingtheT/Tpayment.


Port: Guangzhou Port.
595 Veradel A 301 Nt Solvay Pes Pesu Series Suppliers
Short on time? Let Veradel A 301 Nt Solvay Pes Pesu Series sellers contact you.
VERIFIED
Jul-14-15
 
PLUSTEAM Series Steam Sterilizers are available frmom 1 STU (96 L) capacity to 14 STU (945 L). Double or single door cofigurations are possible with hinged, automated sliding or manual sliding options.
* Chamber,jacket, steam generator & doors from AISI 316 L quality stainless steel
* Panels from AISI 304 quality stainless steel
* All piping, fittings, valves and corner sections are from AISI 304 or AISI 316 quality stainless steel
* 7" LCD Color TFT Touchscreen with microprocessor controlled PLC controller
* Thermal Printer
* Various optional features and accessories are available upon request



Packed in wooden crate. Covered with PE film & bubble nylon and supported with foams on panels.
VERIFIED
Jan-25-23
Supplier From Muansamutsakorn, Samutsakorn, Thailand
 
PA/PE (UGB Series)
PA based barrier films
Film structure : PE/PE/TIE/PA/TIE/PE/PE
Film structure : PA/TIE/PA/TIE/PE/PE/MPE
Medium barrier to gas ,oxygen
Excellent sealability
Excellent barrier to water vapour
High gloss, transparency, printability (dissymmetric)

PE/PA/EVOH (SHB Series)
PA-EVOH barrier film
Film structure : PA/EVOH/PA/TIE/PE/PE/MPE
Film structure : PE/TIE/ PA/EVOH/PA/TIE/PE
High barrier to gas ,oxygen
Excellent sealability
Excellent barrier to water vapour

PP/PA (UGB Series)
PA based barrier films
PA/TIE/PA/TIE/PP/PP/MPP
Medium barrier to gas , oxygen
Excellent sealablity
Excellent barrier to water vapour
High gloss ,transparency,printability (dissymmetric)
Pasteurization and retortable (PP/PA)

PP/PA/EVOH (SHB Series)
PA-EVOH barrier films
PA/EVOH/PA/TIE/PP/PP/MPP
High barrier to gas , oxygen
Excellent sealablity
Excellent barrier to water vapour
High gloss ,transparency,printability (dissymmetric)
Pasteurization and retortable (PP/PA)
Sep-24-14
 
Model: pe600x900
Capacity(t/h):40-110
Feeding size(mm): 600x900
Max feeding size(mm): 425
Motor power(kw):75
Jaw crusher is the primary crusher, this machine can crush iron ore, copper ore, gold ore, manganese ore, river stone, gravel, granite, basalt, mineral, quartz.It can be implicated in mining, metallurgy, construction, highway, railroad, water conservancy.
Feature
1. Simple structure easy to install.
2. High productivity with low cost
3. Highest level raw material used

20gp/40gp/40hq container
Jun-20-13
 
Product description:
Jaw Crusher is ideally suitable for primary and secondary crushing. The largest compression resistance of the material to be crushed is 320MPa. The jaw crusher is widely used in stone mining, metallurgy industry, building material, highway, railway, and chemical industry.
Working Principle:
The main structure of the jaw crusher consists of body frame, eccentric shaft, big pulley, flywheel, movable jaw, cheek plate, toggle plate, toggle seat, top thread bolt, reset spring, fixed jaw and movable jaw; the toggle plate has a great role in insurance. This jaw crusher uses motor as its power. Through the motors wheels, the eccentric shaft is driven by the triangle belt and slot wheel to make the movable jaw plate move by a regulated track. Therefore, the materials in the crushing cavity composed of fixed jaw plate, movable jaw plate and side-lee board can be crushed and discharged through the discharging opening.

Features:
1.The deep crushing cavity increases the feeding capacity and output capacity;
2.High crushing ratio, homogeneous final product size;
3.Adjusting the discharge opening through gasket, more convenient¡¢the adjusting range is wide, it can meet different customers' requirement;
4.Lubricate system is safe and reliable, easy to change the spare parts;
5.Simple structure, easy maintenance; consumption cost is lower;
6.Energy-saving; for one set of crusher saving about 15%-30% and more than twice for the whole crushing system;
7.Adjustment of the discharge port range, to meet the requirements of the different users.
Dec-14-12
 
Pe and pex series jaw crusher crust take high strength steel plate through processing of welding and heating and finally become stronger and tougher. Crushing ratio of european type jaw crusher is bigger than before .Wearing resistant part interface is going through precision machining and the product granularity after crushing process is more even. And the motor bearing takes sino-foreign joint venture brand which makes products more competitive in the market.


Negotiable
Oct-18-14
 
Applications: designed for delivering treated water (feedwater) at the pumping temperature of up to 438К ted, nsure a normal functioning of the balancing device, its chamber is to be communicated with the suction pipeline. A bearing end cover, fitted in the non-drive side bearing housing, has a shaft position indicator for sight control of the wear of balancing device surfaces and for restraining rotor axial displacements towards the delivery side.

The pump rotor is carried by the plain bearings with ring lubrication (with forced lubrication from a pressure lubrication installation for the pump pe 270-150).

The design of pump shaft seal chambers provides both for housing mechanical seals and for packing the stuffing boxes, which are to fed with cooling liquid.

Sense of rotation of shaft in all the pumps is counterclockwise (clockwise in case of pe 270-150), if viewed from the drive side.

Pump designation: first number indicates the capacity, m3/h; the second number indicates the head, kgf/cm2.
May-22-21
 
PE series Jaw Crusher is typically used as primary crushers, or the first step in the process of reducing rock. They typically crush using compression.
Sep-06-14
 
Jaw Crusher Characteristic and Advantage
Simple and strong structure, large crushing ratio, high output.
Adopts world-class manufacturing technology and be made of high manganese steel (work hardening steel).
Compound pendulum jaw crusher, coarse crushing equipment
Casting molding at a time, with wear-resistant & pressure-resistant, having longer crushing life
Mainly used for breaking large, medium and small hard stones and the corresponding object.
Stable performance, low production cost and even particularly convenient maintenance.
Feb-01-17
 
number:SS-COIL

specifications:Thickness 0.025-4mm

classification:Stainless steel coil

introduce:Stainless steel coil material grade: 201, 202, 301,302,303,304,309S, 410S, 430, 316, 316L
1:Product description
Standard: ASTM A240, JIS G4304, etc.
Material grade: 200&300&400series
Surface finish: 2B, BA, Mirror finished, N04, Hair Line, Matt finished, 6K, 8K
Type 201 stainless steel is an austenitic chromium-nickel-manganese stainless alloy. It was developed mid century to conserve nickel and it is used as an alternative to type 301 in some tempered applications. Because of 201â??s relatively high yield strength in the annealed condition, use of 201 is limited. Type 201 is generally used in the tempered condition particularly for springs and fasteners. 201 Stainless will retain a comparable ductility to 301 even with the higher yield strength.
Alloy 204CU is a chromium-magnesium austenitic stainless steel with an addition of 2-4% copper and nitrogen of 0.05-0.25%. Due to the addition of copper the alloy has better formability than 201 and 304. The copper improves corrosion and resistance to stress corrosion cracking in certain media. 204CU bridges the cost-property gap between 200 and 300 series stainless. Alloy 204CU is slightly after cold working but can be minimized.
Type 301 is an austenitic stainless steel capable of attaining high strengths and ductility by cold working. It is not hardenable by heat treatment. Type 301 is non-magnetic in the annealed condition and becomes increasingly magnetic with cold working. It is preferable over types 302 and 304 in the tempered condition because the higher elongations (which are attainable at a given strength level) facilitate fabrication.
Type 302 is not hardenable by heat treatment and in non-magnetic in the annealed condition. It becomes increasingly magnetic with cold working. If carbide precipitation is an issue 304 may be a better choice with its lower carbon content.
Dec-24-16
 
Introduction:
Application of Jaw Crusher is one of the most popular stone crusher in the world, Jaw Crusher is ideally suitable for primary and secondary crushing. The highest anti-pressure strength of crushed material is 320MPa. It is widely used in mining, metallurgy, construction, highway, railroad, and chemistry industries and etc. Many models are available according to your different fineness requirements.
Features And Bebifits

This product has the feature of big feeding size: can from 80-150 mm, small grain-size, high yield, finished product ratio can reach more than 90% under 5mm, uniform grain type, high production capacity, reversible operation, adjustable plate, simply process, simple structure, convenient maintenance, stable operation is the major feature of this series of crusher
1)Gate bar manufactured with special spring steel, both sides can use, long using life.
2)270 ° direction discharge in crushing cavity, higher yield.
3Feeding from the central of top machine, and positive and negative can reversing, t
he hammer head not head back that is its can both use.
4) Drag screen frame can be adjusted up or down, so the sand rate is higher
Oct-25-17

Udel Gf-110 Nt / Bk937 Solvay Psu Resins

$28 - $32
MOQ: Not Specified
Supplier From Dongguan, Guangdong, China
 
Udel PSU
Transparent plastic with high strength & rigidity

PSU SOLVAY UDEL P-1700 NT11 / HC(high clear) / BK937 / WH6417 / WH7407 / CL2611 / GY8057
PSU SOLVAY UDEL P-1710 NT15
PSU SOLVAY UDEL P-1720 NT13
PSU SOLVAY UDEL P-3500 NT11
PSU SOLVAY UDEL P-3500 LCD
PSU SOLVAY UDEL P-3500 LCD MB
PSU SOLVAY UDEL P-3700 HC
PSU SOLVAY UDEL P-3703 NT11
PSU SOLVAY UDEL GF-110 NT / BK937
PSU SOLVAY UDEL GF-120 NT / BK937
PSU SOLVAY UDEL GF-130 NT / BK937
Oct-25-17

Udel Gf-120 Nt / Bk937 Solvay Psu Resins

$28 - $32
MOQ: Not Specified
Supplier From Dongguan, Guangdong, China
 
Udel® PSU
Transparent plastic with high strength & rigidity

PSU SOLVAY UDEL P-1700 NT11 / HC(high clear) / BK937 / WH6417 / WH7407 / CL2611 / GY8057
PSU SOLVAY UDEL P-1710 NT15
PSU SOLVAY UDEL P-1720 NT13
PSU SOLVAY UDEL P-3500 NT11
PSU SOLVAY UDEL P-3500 LCD
PSU SOLVAY UDEL P-3500 LCD MB
PSU SOLVAY UDEL P-3700 HC
PSU SOLVAY UDEL P-3703 NT11
PSU SOLVAY UDEL GF-110 NT / BK937
PSU SOLVAY UDEL GF-120 NT / BK937
PSU SOLVAY UDEL GF-130 NT / BK937
Oct-25-17

Udel Gf-130 Nt / Bk937 Solvay Psu Resins

$28 - $32
MOQ: Not Specified
Supplier From Dongguan, Guangdong, China
 
Udel® PSU
Transparent plastic with high strength & rigidity

PSU SOLVAY UDEL P-1700 NT11 / HC(high clear) / BK937 / WH6417 / WH7407 / CL2611 / GY8057
PSU SOLVAY UDEL P-1710 NT15
PSU SOLVAY UDEL P-1720 NT13
PSU SOLVAY UDEL P-3500 NT11
PSU SOLVAY UDEL P-3500 LCD
PSU SOLVAY UDEL P-3500 LCD MB
PSU SOLVAY UDEL P-3700 HC
PSU SOLVAY UDEL P-3703 NT11
PSU SOLVAY UDEL GF-110 NT / BK937
PSU SOLVAY UDEL GF-120 NT / BK937
PSU SOLVAY UDEL GF-130 NT / BK937
Oct-21-17
Supplier From Dongguan, Guangdong, China
 
DURADEX® PPSU
High heat, high impact performance
PPSU SOLVAY DURADEX D-3000 NT / TRGY391
PPSU SOLVAY DURADEX D-2500 NT
PPSU SOLVAY Acudel 22000
PPSU SOLVAY RADEL R-5000 NT / CL301
PPSU SOLVAY RADEL R-5100 NT15 / BK937 / GY1137 / GY1037 / GY874 / RD1018 / OR1145 / YL1337 / GN1007 / BU1027 / VT2582 / BN1164
PPSU SOLVAY RADEL R-5500 NT / NT15 / BK937
PPSU SOLVAY RADEL R-5600 NT
PPSU SOLVAY RADEL R-5800 NT
PPSU SOLVAY RADEL R-5900 NT
PPSU SOLVAY RADEL R-7110 GY575
PPSU SOLVAY RADEL R-7800
We can give discount according to order quantity.
Feb-21-06
Supplier From Qingdao, China
595 Veradel A 301 Nt Solvay Pes Pesu Series Suppliers
Short on time? Let Veradel A 301 Nt Solvay Pes Pesu Series sellers contact you.
Explore Veradel A 301 Nt Solvay Pes Pesu Series related import export discussions