Solar Vacuum Tube Description : Stracture : Dual tube geometry Glass materails : Borsoslicate glass to ISO 9000 Outer diameter : 47mm Inner tube diameter : 37mm Tube legth : 1500mm Absorber coating : inner tube coated with four layer cermet selective coating magnetron sputtering vaccum slashing absorptance>93% Emittance :
Product Name:Three target solar vacuum tube for solar cooker Outer side diameter :137mm Inner side diameter:121mm Length:600mm
Our solar vacuum tubes has prosperity of high absorption and low emission. The vacuum tube consists of outer tube, inner tube, (al-n-ss-cu) coating and holder.Al-nn-ss-cu is coating for three target tube. Three target assimilate the advanced 12 layers of spattering deposition of trivalent element technology, high borosilicate glass, and gradual change of al-n-ss-cu selective complex absorptive coating. These make three target vacuum tube have high performance of absorption and low reflection ratio. Because of the coating, three target vacuum tube’s absorption rate increase 30%-50% than normal tube.
Our main product is solar water heater, solar project, has laser welding, automatic punching and vacuum sputtering equipment to strictly control the product quality. Main high and core technology is blue coating flat collector, which is advanced worlwide. Our main product is solar water heater, solar project, has laser welding, automatic punching and vacuum sputtering equipment to strictly control the product quality. Main high and core technology is blue coating flat collector, which is advanced worlwide.
The vacuum blood collection device consists of three parts: vacuum blood collection tube, blood collection needle (including straight needle and scalp blood collection needle), and needle holder. Vacuum blood collection tube is the main component, mainly used for blood collection and storage. A certain amount of negative pressure is preset in the production process. When the blood collection needle punctures into the blood vessel, the blood automatically flows into the blood collection tube due to the negative pressure in the blood collection tube ; At the same time, various additives are preset in the blood collection tube, which can fully meet the clinical multiple comprehensive blood tests, safe, closed, and convenient for transportation. Vacuum blood collection tubes are generally divided into the following types: 1. Dry empty tube without additives: The inner wall of the blood collection tube is evenly coated with the agent (silicone oil) to prevent wall hanging. It uses the principle of natural blood coagulation to coagulate the blood. After the serum is naturally precipitated, it is centrifuged for use. Mainly used for serum biochemistry (liver function, kidney function, myocardial enzymes, amylase, etc.), electrolytes (serum potassium, sodium, chloride, calcium, phosphorus, etc.), thyroid function, drug testing, AIDS testing, tumor markers, serum immunity learn. 2. Coagulation accelerator tube: the inner wall of the blood collection tube is evenly coated with silicone oil to prevent wall hanging, and coagulant is added. The coagulant can activate the fibrinase, so that the soluble fibrin becomes insoluble fibrin aggregates, and then forms a stable fibrin clot. If you want to get the result quickly, you can use the coagulation tube. Generally used in emergency biochemistry. 3. Blood collection tube containing separation gel and coagulant: The tube wall is siliconized and coated with coagulant to accelerate blood coagulation and shorten the inspection time. Separating glue is added in the tube. The separating glue has a good affinity with the PET tube, and it does play a role in isolation. Generally, even on ordinary centrifuges, the separating glue can remove the liquid components (serum) and solid components (blood cells) in the blood. Completely separate and accumulate in the test tube to form a barrier. After centrifugation, no oil droplets are produced in the serum, so the machine will not be blocked. Mainly used for serum biochemistry (liver function, kidney function, myocardial enzymes, amylase, etc.), electrolytes (serum potassium, sodium, chloride, calcium, phosphorus, etc.), thyroid function, drug testing, AIDS testing, tumor markers, serum immunity learn. 4. Blood collection tube containing anticoagulant in the tube
Conventional
Essential details Model Number: CDRQ/CXG Disinfecting Type: R Properties: biochemical analysis Size: 13*75mm Stock: NO Shelf Life: 2 years Material: PP Quality Certification: ce Instrument classification: Class II Safety standard: None Color: Yellow, orange, red, blue, green, black, lavender, white Additive: gel/clot activator/ETDA/Heparin/sodium citrate/ACD/ combined Specimen for test: plasma/serum/whole blood Lab use: Bio-chemical Determination, Hemorheology Test Supply Ability Supply Ability 3000000 Piece/Pieces per Month
SERUM TUBES In order to obtain serum samples from plastic tubes, the tube must have coagulation activator added. As the plastic suface alone is insufficient to trigger the coagulation within an acceptable time, LYBCON VACUTAINER serum tubes have silica particles added for this purpose. CLOTTING TIMES The recommended minimum time for the coagulation of samples from patients who have not been treated with anticoagulants is 30- 45 minutes for serum (red).
Non-Pressurized Solar Hot Water Heating Solar Water Heater Evacuated Tube Solar Collector Geyser Features: 1. Cheap and reliable solution, Simple structures, Easy installation. 2. High efficiency of heating,water heated by sun light directly. 3. Withstands water pressure no more than 0.1MPa. 4. Operated without any power supplying. 5. Electric heater can be used as back-up in rainy days. 6. Hot water can be used directly, or can be used as a pre-heated. 7. Water flow in the vacuum tubes and is operated when confined. 8. Tank is equiped with electric water heater setting,automatic temperature controller(optional ). 9. the insulating layer uses polyurethane bulk bubble,keep hot water 72 hours. Specifications: 1.Inner tank: SUS304-2B,SUS316L,0.31mm,0.4mm,0.5mm 2.Outer tank:Galvanized Steel 3.Tank capacity:80L/100L/120L/150L/180L/200L/240L/250L/300L/320L/360L 4.Vacuum tube:58*1800mm Borosilicate Glass 3.3; Al-Ss-Cu Absorb Coating 5.Stand:Galvanized Steel, 1.5mm; 20-45 degree 6.Insulation layer: 50mm,55mm,60mm 7.Optional accessories : Electric heating, Intelligent controller, Mg. Rod, 3L/5L/8L assistant tank Remark: 1.Solar hot storage tank diameter(mm): 460mm,470mm,480mm 2.Thickness, insulated(mm): 50/55/60 3.Vent connection(inch):1/2'' or 3/4'' 4.Electric heater connection(mm): 47,1/2", 3/4"or 1" 5.Water connection(inch): 1/2'' or 3/4'' 6.Collector angle(degree): 20-45 degree
Inside of tank 304 quality chrome Outside of tank depend for order with gray colored or 404 shining chrome. Also we have 4 type of cold water tank 30lt/80lt/130lt/180lt for 24 tubes solar enegy system Standart size
30 vacuum tubes Inside 304 qualty stainless chrome Outsite 404 quality shiny chrome or gray colored galvanized Also have 4 kind cod water tank 30lt/80lt/130lt/230lt Standart size
High temperature vacuum tube collector (direct current heat pip tube) The tube has 1, vacuum and direct current, 2, selective coating 3, heat pipe in it, The tube working temperature 200-550 It just work for solar thermal power plants, parabolic trough system, solar air-condition. The diameter has 100mm, 120mm, inner diameter 70-100mm, and the length has 1500mm, 1800mm, 2000mm, 4000mm.
Heat pipe vacuum tube Products detail: Perfect combination of the vacuum tube and the heat pipe. 1.High heat efficiency: advanced heat transferring style of the heat pipe, excellent sclective absorptive coating and perfect combination with high vacuum heat preservation. 2.Wide applicable ranger: as the heat pipe has less heat capacity, it can be started quickly even under cloudy day and collect heat effectively.It can work normally even -30?, as no water in the vacum tube, it can effectivelyprevent lowing of heat efficiencydue to frost cracking. 3.Each individual tube can work independently, and the whole machine can still work if andy single tube was broken.And the service life of the heat pipe can be over 15 year. 4.The unique connection between the heat pipe and the vacuum tube canensure both sealing and glassvacuum tube avoid damage.
Inner tank: Food Grade Stainless Steel by argon protect welding, supply water quality and drinkable Outer shell: Galvanized Steel coated uncorrosion layer Heat insulation layer: 50-60mm import polyurethane integral foaming Frame: Galvanized Steel coated uncorrsion layer, both install inclined and flat roof. High Pressure Cold Water In: 6 bar cold water to tank from Feeder or Electric Auto Valve. Automatic Heating Element free 1% spare parts are free 5 years quality warranty All install documents are free Export Cartons
We're the pioneer company in the research & development and manufacturing of the solar water heaters. Consol solar is a supplier of high quality, low cost, easy to install. Solar energy superconductive vacuum collector tubes. Heat pipe has a low hot capacity, and has rapid heat exchange (it is 1000 times of copper heat exchange speed), so it is an available speediness heat exchanger. Heat exchange rate is up to 99%. The startup is fast, collect solar energy fully, at 25, 5 minutes can startup heat. At the same time, it has heat exchange unilateralism diode function system, for example: heat energy exchange is a direct progress from heat absorber to water. But it will not back up or reversal in the water. Because of matter physics effect in the heat tube and especial construction of condenser, the biggest work temperature of this system will be controlled; this particular characteristic ensures the stability under especially conditions
Features: 1) Tube storage temperature range: -38 ~ 90c 2) Perfect seal between cap and tube 3) Accurate blood drawing volume 4) No hemolysis or protein adsorption 5) Blood clot between 3 minutes for clot activator tube 6) Material: Glass and PET 7) Color of caps: red, orange, yellow, gray, blue, green, purple,black 8) Tube normal specification: 1375mm, 1395mm, 13100mm, 16100mm 9) Blood drawing volume: 1~10ml 10) Package: foaming pallet and carton 11) Max. vacuum degree tolerance:±10% 12) Draw required volume and invert the tube for 6-8 times gently
Vacuum Blood Collection Tube/Disposable Vacuum Blood Collection Tube Blood Collection Tube Materials: PET/Glass Blood Collection Tube Size: 1ml-10ml available Additive Type available: Blood Collection Tube + No additive Blood Collection Tube + EDTA k2 Blood Collection Tube + EDTA k3 Blood Collection Tube + Heparin sodium Blood Collection Tube + Heparin lithium Blood Collection Tube + Sodium citrate1: 9 Blood Collection Tube + Sodium citrate1: 4 Blood Collection Tube + Seprate Gel+Clot activator Blood Collection Tube + Fluoride/oxalate Blood Collection Tube + Clot activator cap color normal specification material blood drawing volume packing additive red 13*75 PET 1-5ml 1200pieces/carton non 16*100 PET 8-10ml 1200pieces/carton purple 13*75 PET 1-5ml 1200pieces/carton EDTA-K3 black 8*120 glass 1.28ml 1200pieces/carton 0.129M sodium citrate 1:4 blue 13*75 PET 1.8ml 1200pieces/carton 0.109M sodium fluoride/CTAD 1:9 green 13*75 PET 1-5ml 1200pieces/carton heparin lithium yellow 13*75 PET 1-5ml 1200pieces/carton separation gel/coagulation accelerator 13*100 PET 5-7ml 1200pieces/carton Lithium Heparin/Sodium Heparin Vacuum Blood Collection Tube
Vacuum Blood Collection tube ranging from 1-10ml. Available in EDTA, Serum, Fluoride, Citrate, Heparin and SST
Api vacuum insulated tubing Skype: julia0402zcy wechat: juliazcy Product name: pre-stressed vacuum insulated tubing/casing Product explanation: 1. Reduces the heat loss, ensures the steam quality being injected into the oil formation as well as the depth of steam injection can be increased. 2. Minimizes heat stress on well casing and cement mantle, protect the casing from damage by high temperature. 3. During oil production it will provide superior insulation and greatly reduce the loss of heat energy Product features: 1. The pre-stress will compensate the tubing expansion caused by temperature difference between the inner and the outer tubes so as to ensure reliable operation under high temp. 2. Gas absorbing materials are packed inside the annulus to clean up harmful gases and maintain good insulating property whilst in service.
1. Blood collection tube, 2. Serum tube , pt tube, 3. Heparin tube, 4. No additive tube. Quantity:1200 pcs Measurement:48, 38, 20.
