We supply Jet A1 Fuel, ULSD Diesel EN590, Unleaded Gasoline and Fuel Oil... ORIGIN: EUROPEAN .... Price: Platts minus 7% ... We can supply as CIF, STS and Vessel Take Over. The Seller is The Owner and the TITLE HOLDER ... SBLC MT760 is accepted as NON-TRANSFERABLE, NON-OPERATIVE and is issued to the SELLER (not to a fiduciary).. We're looking for RWA buyers... MOQ is 50,000 MT for EN590, FUEL OIL, and Gasoline, and 2M bbl for Jet A1 Fuel .... Contact: Usama
En590, jeta1 and d6.
En 590 Gas Oil Is A Gas Oil With A Sulfur Concentration Of 10 Ppm. It Has A Higher Cetane Number Than A2 Class Gas Oil (another 10ppm Sulphur Content Class Of Red Diesel), Making It More Suited To Internal Combustion Engines In Off-road Cars. The Seller Will Issue The Necessary Documents As Agreed In The Delivery Procedure. Contact Us In Order To Issue The Soft Offer To Your Company For Proceeding. Seller Working Procedures, Terms, And Condition. Fob Price: Us$610.00 -- $620 Per Metric Tons (negotiable) Origin: Kazakhstan Key Specifications/Special Features: TEST UNITS METHOD RESULT Density at 15 C Kg/m2 EN ISO 12185 845.0 API gravity Kg/L ASTM D 1250 34 Ash content %m/m EN ISO 6245 0.01 Flash point C EN ISO 2719 Above 55 Sulphur content Mg/Kg EN ISO 20884 10
Jet a1, en590 diesel, crude oil .Connect buyers and sellers
Diesel Gas oil ultra-low sulphur diesel (ULSD) - EN590 10PPM Origins - Azerbaijan and Georgia MOQ: 20,000 metric tons MAX: 300,000 metric tons Shipping Inspection - SGS or equivalent at the loading port Next steps - If the above sounds good, let's discuss and we can get a more precise quote based on your exact requirements.
Property Specification Appearance Clear and Bright Density @ 15C 820 - 845 kg/m Viscosity @ 40C 2.0 - 4.5 mm/s (cSt) Flash Point Minimum 55C Sulfur Content Maximum 10 mg/kg (10 PPM) Cetane Number Minimum 51 Cold Filter Plugging Point (CFPP) -5C (summer grade), -15C (winter grade) Distillation 95% Recovered Maximum 360C Total Aromatics Content Maximum 11% Polycyclic Aromatics Content Maximum 8% Ash Content Maximum 0.01% by mass Water Content Maximum 200 mg/kg Total Contamination Maximum 24 mg/kg Lubricity, corrected wear scar diameter @ 60�°C Maximum 460 micro Copper Strip Corrosion (3h @ 50�°C) Class 1 Oxidation Stability @ 110�°C Minimum 20 hour FAME (Fatty Acid Methyl Ester) Content Maximum 7% by volume Carbon Residue (on 10% distillation residue) Maximum 0.3% HFRR (High-Frequency Reciprocating Rig) Wear Scar Maximum 460 mi
Available for interested buyers 300,000 Mt for TTO on Malaysian water. MOQ: 100,000 Mt x 12 months Origin: JSC, Kazakhstan
Ulsd en590 10ppm, crude oil, light cycle oil (lco), liquified natural gas (lng), jet fuel (a1).Trade agent & logistics agent
ulsd en590 10ppm euro 5 diesel.We ship diesel to your port.
Direct from Kazakhstan Refineries, EN 590 Ultra Low Sulphur Diesel(ULSD) & Jet Fuel A1, tank to tank or CIF transactions are available. Kazakhstan origin with very competitive prices. Also available Azerbaijan origin EN590 10 ppm & Jet fuel A1 from state owned refinery.
EN590-10PPM No sanctioned source: Kazakhstan, Azerbaijan, Georgia or Qatar. CONTRACT TERMS: 12 MONTHS MINIMUN QUANTITY (WITH ROLLS AND EXTENSION) PAYMENTS TERM MT103 OR SBLC INSPECTION BY: SGS, INTERTEC, CAMIN CARGO OR SIMILAR. COMMODITY: EN590/ULSD < 10PPM First Lift: 50,000-100,000 Metric Tons Contract: 100,000-500,000 Metric Tons per Month X 12 Months with R&E FOB Price: Gross $530.00 USD /Net $510.00 USD per Metric Ton
We Neptune One Trading and Petroleum Services, located in Dubai, U.A.E. We are an international trading company deals with import - export of different products. Our founders over the years have had experience in original commodities such as Ultra-low-sulfur diesel (ULSD) EN590 10PPM , UREA, MOP, DAP, Wheat, We are proud to present them at competitive prices on the market.
* Quantity MIN 50,000MT x 12 months * Origin: German Origin Specifications: The products are in accordance with the specifications requested by The Buyer or presented by The Seller. * Payment: By MT103/760 * Price/Commissions: Final price to Buyer is the Gross, including all commissions. * Payment is then made by Seller, who carries out all commissions transfers. *Contract: 12 Months with possible rollovers. * Inspection: SGS or similar * CIF SBLC PROCEDURE - Summary of our procurement process:- 1. Buyer issue an RFP (Per attached template -w- specification sheet) 2. We issue a commercial offer with all relevant tacit data 3. Buyer returns signed commercial offer in conjunction with a Banker Signed RWA letter (Verbiage will be attached in the commercial offer) 4. Seller issues the Sales & Purchase Agreement 5. The Contract is formalized and lodged with respective bankers 6. Buyer's Banker issues a Pre-Advice MT799 7 Seller issues the Price Lock Notice (a discount is set on this day per the Platts Assessment of the day) 8. Buyer Banker issues the collateral (MT760) 9. Seller's Banker issues 2% Performance Bond 10. Seller charters the vessel/barges 11 Seller berths the vessel/barges 12. Seller loads the vessel/barges 13. Seller issues Product & Shipping Documentation (Digitally AND via courier) 14. Vessel/Barge departs for destination
**EN590 Diesel 10ppm** EN590 Diesel 10ppm is a high-quality diesel fuel conforming to the European standard EN 590. The "10ppm" designation indicates that the fuel contains a maximum of 10 parts per million of sulfur, making it a low-sulfur diesel. This specification is crucial for reducing emissions and improving air quality. **Key Features:** - **Sulfur Content:** The low sulfur content of 10ppm helps in significantly reducing harmful emissions, including sulfur dioxide (SO2), which contributes to air pollution and acid rain. - **Environmental Impact:** By adhering to the EN590 standard, this diesel fuel supports compliance with stringent environmental regulations, leading to lower vehicle exhaust emissions and improved air quality. - **Performance:** EN590 Diesel 10ppm is designed to enhance engine efficiency and longevity. Its low sulfur content helps in reducing the wear and tear on engine components and the maintenance needs. - **Compatibility:** Suitable for use in modern diesel engines that require low-sulfur fuel, helping to ensure that advanced emission control technologies, such as diesel particulate filters (DPFs) and selective catalytic reduction (SCR) systems, function effectively. **Regulations and Benefits:** The adoption of EN590 Diesel 10ppm is part of broader regulatory efforts to minimize environmental impact and promote cleaner fuels. It aligns with the European Unionâ??s environmental and fuel quality standards, which aim to reduce pollutants and greenhouse gas emissions. Overall, EN590 Diesel 10ppm represents a commitment to cleaner, more sustainable diesel fuel, contributing to reduced environmental impact and improved engine performance.
Greetings, I am Amir, official appointed (with letter) Mandate to End Seller (Refinery). We sell EN590 10ppm USLD 10 and others product such as JET A1, D2 and etc based on TTT, TTV, FOB dip & pay and CIF ASWP. Price will be very competitive with ZERO upfront payment. FOB can be done at following port: 1. ROTTERDAM. 2. HOUSTON. 3. JURONG. 4. BUKOM. 5. BUSAN KOREA 6. USLAN ZHOUSHAN. 7. QINGDAO. 8. PORT KLANG. 9. MANILA. 10. AL FUJAIRAH. 11. DOHA. 12. RAS LAFFAN. 13. KAOHSIUNG. 14. NAGOYA. WITH SGS REPORT. Contact me if you are the End Buyer or Mandate Buyer (no long chain brokers) with sufficient fund to purchase, Thank you. FOB price for EN590 10ppm ULSD 10 is USD430 gross/USD410 nett at above-mentioned Port. Others product such as JET A1, JP54, Pet Coke, Urea, D2, LNG, LPG and more is also available. Do not hesitate to contact me
Fresh vegetables, fresh products: orange, potatoes, yellow onion, red onion, fresh garlic, dry garlic, dry white beans, pomegranate, intermediation for diesel en590, jp54 aviation jet fuel a1, d6 diesel oil , d2 diesel oil, lpg, lng, automotive gas oil (ago) intermediation for sugar icumsa 45, yellow corn, wheat.Intermediation for diesel en590, jp54 aviation jet fuel a1, d6 diesel oil , d2 diesel oil, lpg, lng, automotive gas oil (ago) intermediation for sugar icumsa 45, yellow corn, wheat
Oil and gas commodities: crude, jet fuel, d6, en590, d2, mazut, petcoke, urea 46, coal, lng, lpg agricultural commodities: sugar (including icumsa 45, 150, etc), wheat, edible oils, wheat, corn, soya and soya products, meat.Corporate representation, business consulting, intermediation, brokering, agency.
A) C.I.F. - COST, INSURANCE, FREIGHT PROCEDURE: 1. Buyer issues an official Irrevocable Corporate Purchase Order (ICPO), with Sellers procedures. 2. Seller issues Sales and Purchase Agreement (SPA) open for amendment via mandate to Potential Buyer. 3. Potential Buyer countersigns, duly initial by Co- Buyer and sends back to Seller the aforesaid SPA in Acceptance. 4. Seller issues, SGS report, Certificate of origin and product attestation letter to buyer. 5. Seller requests the nominated shipping company to issue the Charter Party Agreement (CPA) for Seller to sign with the shipping company as the Consignee to be shown on the Bill of Lading to whom the shipment is consigned. 6. Seller submits the Contract to the Ministry of Energy for Legalization and final approval and notarization (if required), Buyer and Seller make 50% payment of Shipment value via MT103 TT 7. Seller Legalizes the Draft contract, and send the final approved contract to Buyer via Secured Email service along with PPOP which include: Product Passport (Quantity & Quality Dip Test Analysis Report). Certificate of Origin. Copy of TSR (Tank Storage Receipt) at Loading Port. Legalized Contract (SPA). Export License. Fresh Data marine analysis Report Note: Freight Payment (50/50 between Seller & Potential Buyer). Such payment shall be deducted from the final cargo payment. 8. All parties involved in this transaction sign the NCNDA/IMFPA to product for all intermediary's commission(s) as payable by each side oneself separately. 9. Once Receipt of Payment as aforesaid Seller commences loading of the product into the chartered oil tanker vessel and provides the following shipping documents via CoBuyer to the Potential Buyer after loading: Ocean Bill of Lading Cargo Manifest Certificate of Insurance Certificate of Ownership Ullage Report SDS (Safety Data Sheet) The Quota Allocation Certificate issued by the Ministry of Energy 10.Upon vessel on arrival to the Discharge Port, Seller issues ATB/DTA via mandate to Potential Buyer and meantime directs the Captain to dock with the shipping agent along with inspection team to conduct Dip Test in the Vessel Tanker to confirm Q&Q. 11.Upon successful RESULT of Dip Test, Potential Buyer causes his bank to pay via Swift MT103 by T/T wire.
Oil & gas products, en590 diesel, jet fuel a1, d6 virgin fuel, petcoke etc, petroleum products, metal commodities like copper cathode & aluminium ingots.Brokering services
We are looking for buyers of Ultra Low Sulphur Diesel EN-590 10ppm. The minimum order quantity is 25.000 Metric Tons (MT) per month, we accept FOB or CIF shipping terms according to your requirement. We have an excellent commercial relationship with the refinery in charge of supplying the products, this allows commercial dialogues to be more direct with them and facilitates negotiations. Interested in receiving more specific such as prices, technical sheets and more information about the EN-590, leave a message with your requirements or send your contact information to start a business dialogue.
