Turbofix Sr 555 Suppliers and Manufacturers

High Precision Steel Pipe for Gas spring Cylinder Type:Seamless and Welded Steel Tube Roughness 0.1-0.8ra Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020 Surface:Black/bright Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101 Size :OD 3mm-140mm Thickness 0.5-20mm Processing :Cold rolled /cold drawn 1. BK (+C) No heat treatment after last cold forming process. 2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing) 3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed. 4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere. 5. NBK (+N) After the final cold forming process the tubes are annealed above the upper Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request. Usage: Gas Spring Cylinder Taian Henson Metal Co lTD

High Precision Steel Pipe for Gas spring Cylinder Type:Seamless and Welded Steel Tube Roughness 0.1-0.8ra Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020 Surface:Black/bright Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101 Size :OD 3mm-140mm Thickness 0.5-20mm Processing :Cold rolled /cold drawn 1. BK (+C) No heat treatment after last cold forming process. 2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing) 3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed. 4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere. 5. NBK (+N) After the final cold forming process the tubes are annealed above the upper Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request. Usage: Gas Spring Cylinder

High Precision Steel Pipe for Gas spring Cylinder Type:Seamless and Welded Steel Tube Roughness 0.1-0.8ra Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020 Surface:Black/bright Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101 Size :OD 3mm-140mm Thickness 0.5-20mm Processing :Cold rolled /cold drawn 1. BK (+C) No heat treatment after last cold forming process. 2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing) 3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed. 4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere. 5. NBK (+N) After the final cold forming process the tubes are annealed above the upper Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request. Usage: Gas Spring Cylinder

High Precision Steel Pipe for Gas spring Cylinder Type:Seamless and Welded Steel Tube Roughness 0.1-0.8ra Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020 Surface:Black/bright Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101 Size :OD 3mm-140mm Thickness 0.5-20mm Processing :Cold rolled /cold drawn 1. BK (+C) No heat treatment after last cold forming process. 2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing) 3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed. 4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere. 5. NBK (+N) After the final cold forming process the tubes are annealed above the upper Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request. Usage: Gas Spring Cylinder

High Precision Steel Pipe for Gas spring Cylinder Type:Seamless and Welded Steel Tube Roughness 0.1-0.8ra Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020 Surface:Black/bright Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101 Size :OD 3mm-140mm Thickness 0.5-20mm Processing :Cold rolled /cold drawn 1. BK (+C) No heat treatment after last cold forming process. 2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing) 3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed. 4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere. 5. NBK (+N) After the final cold forming process the tubes are annealed above the upper Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request. Usage: Gas Spring Cylinder

High Precision Steel Pipe for Gas spring Cylinder Type:Seamless and Welded Steel Tube Roughness 0.1-0.8ra Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020 Surface:Black/bright Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101 Size :OD 3mm-140mm Thickness 0.5-20mm Processing :Cold rolled /cold drawn 1. BK (+C) No heat treatment after last cold forming process. 2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing) 3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed. 4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere. 5. NBK (+N) After the final cold forming process the tubes are annealed above the upper Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request. Usage: Gas Spring Cylinder

Barite, also spelled baryte, is a mineral consisting of barium sulfate (BaSO4). It's generally white or colorless, and is the main source of the element barium. This mineral has a very high specific gravity, which is in the range of 4.1 to 4.5. That's unusually high for a nonmetallic mineral. Barite is found in hydrothermal ore veins, sedimentary rocks like limestone, clay deposits, marine environments, and cavities in igneous rock. It commonly forms as large tabular crystals, clusters of crystals, or divergent plates.

Quartz chips of M grade are similar to quartz lumps of M grade in terms of their high purity and particle size. They also have a minimum SiO2 content of 99.95% and are considered to be of medium grade, with a particle size ranging from 1mm to 6mm. Quartz chips are commonly used in the manufacturing of high-quality glass, ceramics, and electronics components. They are also used in the construction industry as an additive to concrete and mortar to increase strength and durability. The M grade quartz chips are preferred in applications where a medium particle size is required. They are often used as a filler material in the production of refractory products, such as high-temperature insulation and linings

Quartz A grade refer to high-quality quartz that are of the highest grade and purity. This grade typically has a minimum SiO2 content of 99.60 - 99.99%, making them suitable for use in industries where high purity is critical, such as in the production of high-quality optical lenses, semiconductors, and other electronics components. Quartz A grade has a particle size ranging from 1mm to 10mm, in the case of Lumps, depending on the specific application. They are carefully selected and processed to ensure that they meet strict quality standards, including low levels of impurities and uniform particle size distribution.

Quartzite is a naturally occurring metamorphic rock composed mainly of quartz, which is a mineral that belongs to the group of silicate minerals. It forms when sandstone is subjected to intense heat and pressure deep within the earth's crust. This process causes the sand grains in the sandstone to recrystallize and fuse together into a dense, hard rock. Quartzite is a very hard and durable rock that is resistant to both chemical and physical weathering. It is commonly used in construction and landscaping applications because of its durability and attractive appearance. Quartzite is often used as a building stone, flooring material, and as a decorative stone in gardens and landscapes.

Quartz A grade refer to high-quality quartz that are of the highest grade and purity. This grade typically has a SiO2 content of 99.9% and above, making them suitable for use in industries where high purity is critical, such as in the production of high-quality optical lenses, semiconductors, and other electronics components. Quartz A grade has a particle size ranging from 1mm to 10mm, in the case of Lumps, depending on the specific application. They are carefully selected and processed to ensure that they meet strict quality standards, including low levels of impurities and uniform particle size distribution.

Potassium feldspar, also known as K-Feldspar, is a common type of feldspar mineral that is composed of potassium, aluminium, and silica. It is one of the most abundant minerals in the Earth's crust and is found in many types of rocks, including granite, gneiss, and pegmatite, that has a wide range of industrial and scientific applications. Its unique properties make it a valuable resource in a variety of fields, from manufacturing to geology. For example, it is a key ingredient in the manufacture of glass and ceramics, where it is used as a flux to lower the melting point of the materials. It is also used as filler in plastics, rubber, and other materials. We, SRS Minerals are equipped to supply Good quality K-Feldspar, with Potassium content up to 12% in Lumps from 1-300mm size, and in powder form, if required.

"Smokey Grey Quartz Lumps" likely refers to a type of quartz mineral that has a smoky gray or grayish-black coloration. Quartz is a common mineral found in various geological environments, and its color can vary based on impurities and the presence of certain elements. Smoky quartz gets its gray to blackish hue from the natural irradiation of aluminum-containing minerals within the quartz crystal structure. Quartz is a versatile mineral used in various industries and applications, including: Smoky quartz lumps can be used for decorative purposes in home decor, landscaping, and interior design. Quartz is a key ingredient in the production of glass, silicon, and various industrial materials due to its high resistance to heat and chemicals. High-purity quartz is used in the electronics industry for making quartz crystals and oscillators, which are essential components in electronic devices like watches, radios, and computers.

Pegmatite is a type of igneous rock that is characterized by its unique texture and mineral composition. It is known for its exceptionally large crystals and often contains valuable minerals and gemstones. Here are some key features and information about pegmatite: Pegmatites are primarily composed of quartz, feldspar (especially potassium feldspar), and mica. These minerals are often found in exceptionally large crystals within pegmatite veins. The most distinguishing feature of pegmatite is its coarse-grained texture. It contains crystals that are much larger than those found in typical igneous rocks. Crystals can range from a few centimeters to several meters in size. Pegmatites are formed through the slow cooling of magma deep within the Earth's crust. The slow cooling allows for the growth of large crystals. Additionally, the composition of the magma and the presence of volatiles (such as water and gases) play a role in the formation of Pegmatites. Pegmatites are known for their mineral diversity. They can contain a wide variety of minerals, including not only quartz, feldspar, and mica but also rare and valuable minerals such as tourmaline, beryl, garnet, and spodumene. Because of their association with valuable minerals and gemstones, Pegmatites are often of interest to mineral collectors and gemstone enthusiasts. Some of the world's most famous gemstone deposits are associated with Pegmatites.

- Material26MnB5, 34MnB5, EN 10305-2 (DIN 2393) - Technical: Seamless Or Welded; Process: Cold Drawn, Cold Rolled; - Delivery Condition: +C, +N, +SR,+NBK; - Diameter: 20 - 60 mm, Wall thickness: 1.5 - 7.5 mm; Length: Customizable; - Application: Stabiliser, Monobloc shaft, Gear shaft etc.; - Requirements: Excellent reshaping properties (drawing in, hammering), High torsional strength and durability, Excellent welding properties, High levels of geometrical accuracy (eccentricity, roundness), Excellent surface-finish condition.

- Material: 100Cr6, SKF3, GCr15, SKF3S; - Technical: Seamless , Process: Piercing, Cold Drawing, Spheroidizing Annealing, Annealing etc.; - Size Range: OD 10 ~ 160 mm, Wall thickness: 1~ 25 mm; Length: Customized; - Delivery Condition: (1) +C No heat treatment after the final cold drawing process, (2) +LC After the final heat treatment there is a suitable drawing pass,(3) +SR After the final cold drawing process there is a stress relieve heat treatment in a controlled atmosphere, (4) +A After the final cold drawing process the tubes are annealed in a controlled atmosphere, (5) +N After the final cold drawing operation the tubes are normalized in a controlled atmosphere; - Application: Widely Used in Bearing Industry and Automotive Parts, such as Hydraulic Cylinder Pipe, Steel ball, roller and collar of large machinery bearing, axis of rotation, blade, stator pump, profiling, sleeve, mandril, etc.; - Features: High and uniform hardness and wear resistance, and high elastic limit.