The material is heat reinforced polymer, designed to meet the Thermal conductivity and reliability demand for the thermal conductivity of high application terminal. In addition, the heat sinks performance benefits a lot from the low heat resistance. And improve the microprocessor, DC - DC converter of memory module and the reliability of power module. The phase change characteristics: the material is solid in room temperature and installation is completely convenient, used between heatsink and devices. The material can be softened and flowing when the products reach phase-change temperature to fill the devices tiny irregular contact surface. Thus, the material has the ability to fill the gap between the devices and heat sink completely, make the phase change better than non-current elastomers or thermal graphite pad and get the performance of thermal conductive silicon grease. The material is nonconductive, however, as the material has endured the phase change at high temperature, may make the metal get to the metal, so the phase change interface material cannot
Features & Benefits:
Low heat resistance and low stress
Natural sticky, easy to use-no need to use glue
No radiator preheating
Flow but not silicon oil
Low volatility--less than 1%
Addition Cure rtv-2 Liquid Silicone Rubber for Concrete & Stone moulds
Artificial Stone & Concrete Casting Silicone Rubber
Features:
Amazing fluidity and easy to operate
Platinum-based, food-grade silicone (environmental friendly, odorless -and non-toxic)
Delicate design available
Mixing ration: 1:1, easy to mix
Easy de-molding
Excellent tension and tear strength
High performance in duplication
Shrinkage is almost zero (below 0.1)
Excellent resistance to weather, temperature, aging, acid and aging-proofing.
High resistance to high temperature and aging(resist -60â?? to 250â??)
Appearance:
Part A:a non-toxic and odorless liquid with translucent color and platinum inside.
Part B: a non-toxic and odorless liquid with translucent color.
ATT: We can do any curing time as your requirements.
Technical Data
Characteristics of the non cured product
Properties G-820 G-825 G-830 G-835 G-840
A B A B A B A B A B
Appearance low viscous liquid
Colour translucent
Density [g/cm 3 ] at 23 �°C, approx 1.10 1.10 1.10 1.10 1.10
Viscosity [mPa�·s] at 23 �°C, approx 5000�±1000 6000�±1000 7000�±1000 8000�±1000 9000�±1000
Polymerisation
Curing conditions: 1h at 80 �°C
Properties G-820 G-825 G-830 G-835 G-840
Hardness Shore A 20�±2 25�±2 30�±2 35�±2 40�±2
Tensile strength [N/mm 2 ] 45�±10 50�±10 55�±10 55�±10 60�±10
Elongation [%] 500�±50 500�±50 450�±50 450�±50 450�±50
Tear strength [N/mm] 22�±2 24�±2 26�±2 24�±2 12�±2
Application:
GC RTV silicone G-8 series are great for artificial stone casting. They are widely used for architectural elements, block-outs & hole former, concrete counter tops, flexible form liners, GFRC, manufactured stone veneer, ornamental precast & statuary, stamped & textured concrete, etc.
Operation Method:
Both pouring and brushing operation methods for our artificial stone casting silicone are available. You can choose the best one as your preference, we can provide thixotropic agent for brushing.
Notice
What is the hardness should I choose?
Normally 20~40 Shore A will be the best, but it also should according to your size and pattern design.
Warm Tips:
The surfaces with which the material comes in contact must be perfectly clean, free of grease and dry.
Close the bottles after use so as not to confuse the cap of the catalyst with that of the base when re-sealing.
Be aware of possible cross-contamination; it's highly recommended to use only dedicated gear when processing poly-addition RTV2 silicone rubber (including degassing devices).
Be aware that contact with certain material can inhibit the curing of the RTV2 poly-addition silicone rubber. Common contaminants to be avoided include:
-Natural or synthetic rubber, vulcanized with sulphur derivatives.
-Poly-condensation RTV catalyzed with metallic salts.
-PVC stabilizing agents.
-Amine cured epoxies.
-Sulphur, tin and amines derivatives.
-In case of doubt, carry out a small test by pouring the mixture onto a small area of the object.
Our company professionally researches, develops, makes and sells the carbide in ceramic. The founder, mr. Xu zhengkai, produced the first batch of reaction bonded silicon carbide in the beginning of the 1980s and developed the material of silicon carbide added carbon in the middle of 1990s, which reaches to the advance level in the world.
At the same time, it fills in the blank in sealing material in domestic. From 2001, our company produces sintered silicon carbide in enormous quantities, which performance index reach the world level......
The production line of reaction bonded sic and sintered sic, from raw material to finished products, are nationalized, after our company supports to research silicon carbide, design and make equipment for production, with perfected technology.
Product Code: MESM 05
ISI & CE Marked Accelerator High-Vacuum.
Quality Approved From Bureau of Indian Standards, New Delhi.
Anti corrosive Stainless Steel Chassis
Noise level of suction apparatus from is 50 dB +/- 03 dB.
Electrical Requirement â?? 220~230V, 50Hz, 1Phase.
Ideal for MTP / medical / surgical procedures .
Rotary Vane Type Vacuum Pump with -740 +/- 10 mm Hg.
Free air displacement 40 ~ 60 ltrs/min.
Heavy duty HN-65 PU Castors.
320 Watt, 1440 RPM, 0.50 H.P. Electric Motor.
100 mm Vacuum Gauge
Non collapsible Silicon tubing
2 X 2.0/2.5 Ltrs. Polycarbonate/Glass jars with overflow safety.
Bacterial filter fitted on top.
1047 Tiny Silicone Rotary Damper With Gears Suppliers
Short on time? Let Tiny Silicone Rotary Damper With Gears sellers contact you.
We are manufacturer of girth gear for ball mills, cement mills, sugar mills, rubber plant, textile, steel plant, chemical and fertilizer plant, mineral plant, mining plant, rotary kilns & cooler, dryers, etc. We are regularly manufacturing girth gear, drive pinion complete assembly (pinion, shaft, plumber block, bearings, end plate, end cover, sleeves, ), riding ring and riding ring support system, trunnion, support roller with shaft, bearing housing, complete assembly.
1. High modularization design: may equip with various motor or other power input conveniently. 1.Same machine type may equip with various power motor. It is easy to realize the combination and junction between every machine type.
2. Transmission ratio: fine division, wide scope. The combined machine type may form very large transmission ratio, i.e. output very low rotary speed.
3. Form of installation: the position to be installed is not limited.
4. High strength, compact: the box body is made of high strength cast iron. Gear and gear shaft adapts the gas carbonization, quenching and fine grinding process, therefore the bearing capacity of unit volume is high.
5. Long life: Under the condition of correct type chosen (including choosing suitable operation parameters) normal operation and maintenance, the life of main parts of speed reducer (except wearing parts) should not be less than 20000 hours. The wearing parts include lubricating oil, oil seal and bearing.
6. Low noise: because main parts of speed reducer are processed, assembled and tested critically, therefore the noise of speed reducer is low;
7. Parallel axis -bevel wheel speed-down motor.
Promise: One year warranty and Free technical support
Guomao Group have been in conformity with ISO9001:2000 standards, ISO14001:2004 standard, OHSAS18001:1999 standard.
1 GQN/GN series rotary tiller with middle gear transmission, it can be mounted with the tractor 15-160 hp. We can't see the wheel tracks on the soil after it worked. The quality of the rotary tiller is good and the function very well. It is suited to dry land and paddy field. It can save time, labor and money etc. strong point.
Lubenz is an international lubricant brand that is functioned in types of lubricants such as industrial oils, Speciality oils, Marine oils, Agriculture, Machinaries lubricants, Motorcycle lubricants and Automotive lubricants fluids and all types of greases.
We have more than 1000 commercial products, including lubricants, special fluids, and greases used for passenger vehicles, commercial vehicles, and industrial equipment. One of the notable advantages of our products is that they maintain excellent operational properties in a wide range of temperatures.
We have an extensive network of distributors and strategic partnerships, which help promote our products in both local and international markets. At the global level, our presence is continuously expanding. LUBENZ Lubricants exports to more than 40 countries and has established foreign representative offices in the main key regions.
AUTOMOTIVE
Petrol Engine Oil Series SAE50, SAE60, SAE70, 0W20, 0W30 5W30, 10W40 , 15W40, 15W50 , 20W40 , 20W50,
Diesel Engine oil Series SAE 50, 5W30, 10W30, 10W40, 15W40, 15W50 ,20W40 , 20W50.
ATF Series ATF DEX II , DEX III , DEX VI, CVTF.
Gear Oil Series SAE-API GL-5, SAE-140 API GL-4
AGRICULTURE OILS
AGRI 10W-30
AGRI 15W-40
AGRI 10W-40
AGRI Power Transmission Oil 4 SAE 10
AGRI Power Transmission Oil 4 SAE 30
Hydraulic HVLP Series 15, 22, 32, 46
INDUSTRIAL
Hydraulic Extreme Vibranium series
ISO 32,ISO 46, ISO 68, ISO, ISO 100, ISO150, ISO 220.
Heating Oil Extreme Vibranium series 10, 32, 68.
Compressor Oil VDL Series 32,46, 68, 100, 150, 220, 320
Hydraulic HLP Series 32, 46, 86 , 320, 460
GREASES
Grease Ca-EP series
Grease Ca-MP series
Grease HT-EP series
Extreme Grease EP series
Extreme Grease MP series
Grease OG Graphite series
Complex Grease
Silicon Base Grease
Sugar Mill Grease
MARINE
Marine Cylinder Oils
Marine Engine Oils
Marine System Oils
MOTORCYCLE
4 Stroke SAE20W40 API SN
4 Stroke SAE 20W50 API SN / JASO MA2
2 stroke Engine Oil API TC / JASO
SPECIALITY OIL
Transformer oil.
Brake fluid DOT 3, DOT 4.
Coolant 40%, 50%, 100%.
Thermic Fluid series.
Rock Drill oil series
Cutting Oils.
Food Grade Grease and lube.
HEAVY DUTY
Heavy Duty 10W-40
Heavy Duty 15W-40
Heavy Duty 20W-50 E7
Heavy Duty SAE 50
Heavy Duty SAE 30
10W-40 Low SAPS Premium
Heavy Duty Longlife 75W-80
Max Flow Rate Up to 200 m3 /hr
Model - GGP Series
Head - Up to 120 mtr
Temp -Up to 250 dig C
MOC - CI, CI/SS, SS-304, SS316/316L
RPM - 1440 RPM
Type - Mechanical Seal/Gland Type
We bring forth vast industrial experience and expertise in this business, involved in offering a high-quality range of Rotary Gear Pump.
Application:
To Deliver verierty of light and viscous liquid such as Oil, fats, Coal tar. Paints, Molasses Highly viscous materials and liquids paints, Ammonia, Glycerin, Grease etc.
Worm and gear
Material: alloy steel and brass
Manufacture process: Machining
Description: Worm drives are a compact means of substantially decreasing speed and increasing torque. Small electric motors
Worm drives are used in presses, rolling mills, conveying engineering, mining industry machines, on rudders, and worm drive saws. In addition, milling heads and rotary tables are positioned using high-precision duplex worm drives with adjustable backlash
Silicone baby Cup With Handles Ezpz Tiny Cup Manufacturer
100% food grade silicone
BPA/PVC/Phthalate free
Recommended for ages 6 months+
Helps develop fine motor and sensory skills
6 fl. oz. capacity (175 mL)
Leak-resistant removable lid, interchangeable with Silicone Training Cup + Straw
Dishwasher and microwave safe
Sample:
Free sample but freight cost is paid by customers(when sample is in stock).
Mould sample cost depends on design(when sample needing customized)
Support OEM and customized services.Contact us to get more informations.
focus on silicone rubber, plastic products set solutions.It s a set of design, research and development, production and sales services in one of the technical production enterprises, the company has independent mold manufacturing, liquid forming, solid forming, injection molding, die cutting processing, production and assembly workshop.
We have professional engineering and technical team, sophisticated manufacturing process, strict quality inspection process, perfect production equipment and precision testing equipment.
We have passed ISO90001 and ISO14001 system certification, and obtained a number of patent certificates.
Rtv silicone gasket maker can replace rubber gasket, asbestos gasket, cork and paper gasket, it can be use for the seal of cover joint of engine, gear case and casing in automobile, motorcycle and other machinery, to the seal of various parts of machinery, the sie and shape of joint cover require no definition(sealed interval¡¨¹ 6mm). Net85g blister pack
Place of Origin Zhejiang, China
Brand Name GTM
Model Number GTM-RCS
Gearing Arrangement Bevel / Miter
Rated Power 30HP
Input Speed 540RPM
Color Red/Black
Ratio: 1:2.83
Rotary cutter gearbox with Straight bevelwith strengthen capability apply on rotary mower.HP range from 30HP to 75HP.
Gearbox housing use grey iron.
The gears and pinion use forging process.
We had our own inspection room to inspect the gear and housings.
Minimum order 200 Piece/Pieces
Capacity 2000á Piece/Pieces / Month.
