Product description Three Phase Energy Meter Field Calibrator is a precision AC energy meter testing instrument, mainly used to test three phase energy meter error on site and measure various of AC parameters. Technical index Electrical parameters Accuracy class 0.05, 0.1 Resolution 6 TFT 640 480 Electrical parameters - continued Power supply 220V 10%, 50 60Hz Li-polymer battery size mm 110 51 16, nominal output voltage 7.2V, capacity 5000mAh Power line supply U1, UN, 85V-265V 50 60Hz Communication port RS232 Test voltage Range 5-480V Error 0.05% 30V-480V 0.1% 5V-30V Harmonic 2nd-63st
DESCRIPTION Adopting large scale IC and SMT processes,the DTSD1088 DLMS meter is made to accurately total active/reactive energy,forward and reverse active/reative energy and maximum demand.And in real-time it also measures and takes in process parameters like active/reactive power,apparent power,Voltage,current,power factor,frequency and so on,and implements time-of-use control,automatic stroge of reading-day demand,and records load profile and events.And with infrared,RS485,PLC communications equipped,the DTSD1088 DLMS meter is an ideal device to realize time-of use energy measurement and efficient processing in ease.It complies with applicable standards of IEC62052-11,IEC62053-21,IEC62053-61,IEC62054-21,IEC62056-61,IEC62059-11,IEC62059-21. FEATURES 1. Energy measurement (separate and total):Forward and reverse,active,four-quadrant,time-of use,sub-phase. 2. Demand record 3. Real-time parameters 4. Data archive 5. Data freezing 6. Events record 7. Optional infrared,PLC,M-BUS,Ethernet,GPRS communication
DESCRIPTION DTSD1088 three phase multifunctional meter is made to accurately measures total active/reactive energy, forward and reverse active/reactive energy and maximum demand. And in real-time it also measures and takes in process parameters like active/reactive power, apparent power, voltage, current, power factor, frequency and so on, and implements time-of-use control, automatic storage of reading-day demand, and records of load profile and events. DTSD1088 meter realizes time of use energy measurement and efficient processing in ease. It complies with applicable standards of IEC62052-11, IEC62053-21, IEC62053-23, IEC62053-661, IEC62054-21, IEC62056-61, IEC62059-11 and IEC62059-21. FEATURES 1.Customized meter design for Finland Utility. 2.Special terminal block connection for easy wiring. 3.Terminal cover &front cover with detecting features. 4.With backup battery for RTC. 5.Load Profile(Optional) 6.MD measurement 7.Over-load protection: Automatic power-off as load exceeds the specified value(optional) 8.With optical communication port(IEC1107) 9.Open protocol: DLMS/COSEM(Optional)
Product Description Major technical data: Accuracy class: 1.0 Power consumption: 20 years. Main functions: 1) Measurement of 50hz for 3-phase active power 2) 4 tariffs and 8 time periods for user's option 3) RS 485 communication functions 4) Manual and remote control program, and remote-metering functions 5) To record the parameters automatically through CMRI. Features: 1) High accuracy, reliability, overload capability 2) Low power consumption 3) Smt technology and re-flow soldering technology 4) Light weight, small size, easy to install. Model: DTSF318/DSSF318 Standard: IEC 62052-11 IEC 62053-21 IEC 62056-21 Productivity: 100.000pcs/year.
The GF302D1 three phase portable energy meter test equipment consists of an integrated three phase current source(up to 500V/120A or 500V/20A) and built-in three-phase electronic reference standard of accuracy class 0.05%. Characteristic features of the GF302D1 are its wide measuring range, high accuracy and high tolerance to unwanted external influences. The equipment offers high functionality combined with an excellent menu guided operation via built-in keyboards and colored 7" touch LCD-display. Voltage & current harmonics output from 2 to 63 times. This model portable meter test equipment can be programmable by PC, automatic generation of energy meter error test report.
System description: Introducing new epa 300, a portable standard meter Used for the measurement of the three phase power And the energy. Various measuring features combined with its easy operation concept provide the greatest possible flexibility for a comprehensive testing of metering installations on site. Features: 1. On line calibration with external ct 2. Direct current option up to 10a 3. Accuracy < 0.2% 4. Large lcd display. 5. Pulse input & output 6. Sensor for pulse out led Functions: 1. Power and energy measurement of active, reactive and apparent energy 2. Frequency-, phase angle- and power factor measurement. 3. Error measurement on electric meters. Actual values measurement: 1. Rms values of all voltage and current phases 2. Currents for all 3 phases 3. Frequency and power factor - cos ϕ. 4. 3 phase - kw, kwh, kva, kvar, kvarh 5. Percentage of the measurement error with pulse input. Technical data: 1. Power supply: 85-250vac, 50/60hz. 2. Voltage measurement: 0……300v 3. Voltage measurement accuracy: < 0.1% 4. Current measurement: 50ma ….10a (for direct measurement)1 a…1000a (for measurement with clip -on ct) 5. Current measurement accuracy: direct measurement
DTSF22 Three Phase Four(Three) Wire Multi-tariff Electronic Meter are designed to satisfy industrial demand, adopting large-scale integration(LSI), digital sampling technology and surface mounting technology (SMT). It features stable functions, high precision and easy operation. The meter is capable of measuring active/reactive energy and demand in all directions, RS485 port communication, manual and infrared waking during power outage, load record and much more. It can check the battery to ensure the safety and stability of clock. The meter is popularly used by ordinary three phase clients, power plant, transformer substation, communities and main measurement point. 16units/carton
Adopted special large-scale integrated circuit and manufactured with advanced SMT process, DT(S)SD22E Three Phase Four(Three) Wire Multi-function Electronic Energy Meter is featured whit high degree of measuring accuracy, reliable and stable performance, long service life, small cubage and low power dissipation and it usually can be used to measure power consumption at different time segment. And its standard infrared communication port and RS485 communication can realize functions of local meter reading, setting, clock setting and period program etc. Functions and Characteristics Positive/negative active energy consumption measurement, Positive/negative reactive energy consumption measurement and four tariff energy consumption measurement during latest 12 months Measurement of maximum demand and meter clearance... Two time zones, four rates, ten time periods. Event record of voltage/current missing, programming, demand clearance, outage etc. Load curve of current, voltage, power, energy. Real time data display: Time, voltage and current. Self verifying and monitoring of power supply, power network, operation situation of meter. Programming and reading can be realized via infra-red and RS-485 ports. Strong sound-and-light alarm function against abnormal incidents . 16units in one carton.
DTZY1122 Three Phase Four Wire Multi-function Electronic Smart Meter brings many enhancements that support emerging needs of smart grid initiatives, such as enhanced memory, greater security, and remote upgrade ability. Developed with technology and communications flexibility in mind, DDZY1122 platform is both a smart metering element that supports RS485, PLCor low-power RF modules. The meter's modular design provides a cost effective solution for many metering applications. Functions and Characteristics Three phase active(reactive) power consumption measurement at different time segment Display: Large LCD display Record, display and store the total active/reactive power consumption and multi rate power consumption during latest 3months. Measurement of maximum demand and billing Two time zones, four rates, ten time periods. Event record of voltage/current missing, programming, demand clearance, etc. Real time data: Time, voltage and current Self verifying and monitoring of power supply, power Network, operation situation of meter. The function setting, programming and reading (concentrated reading possible) can be realized via infrared and RS-485 ports.
DTSF22 Three Phase Four(Three) Wire Multi-tariff Electronic Meter are designed to satisfy industrial demand, adopting large-scale integration(LSI), digital sampling technology and surface mounting technology (SMT). It features stable functions, high precision and easy operation. The meter is capable of measuring active/reactive energy and demand in all directions, RS485 port communication, manual and infrared waking during power outage, load record and much more. It can check the battery to ensure the safety and stability of clock. The meter is popularly used by ordinary three phase clients, power plant, transformer substation, communities and main measurement point. 16units in a carton.
DDS22 Single-phase Electronic Watt-hour Meter adopts special large-scale integrated circuit, high-performance parts as well as advanced SMT technology. Therefore, the meter is characterized with high accuracy, tamper-proof function, high anti-interference, and long service life. The meter is easy to operate and can meet the customers' requirements well for its reasonable design. It is the optimum product for customers and public utilities. Functions and Characteristics: Accuracy Class: 1.0class The meter adopts special anti-magnet impulse meter reading mechanical register to prevent strong disturbance form external AC, DC magnetic field. Flat error curve, stable for temperature and time, and reliable. To cumulate both direct and reverse energy, prevent tamper of reversal of lines. Light weight, reliable structure. Easy to be handled and installation. Anti-tamper in condition that load is connected between the line and the earth. The meter can also prevent U ring short circuit and other tampers. Low consumption: ≤ 0.6W Distant-motion-width-determination pulse output and multifunctional output ports . 20units/Pack
Single phase & three phase energy meters.
HS-3303M is a three-phase electric energy meter inspection device designed based on the requirements of the IR46 metering part, which meets the harmonic requirements of the IR46 electric energy meter. It can output square wave, peak wave, current multiple zero-crossing wave, higher harmonics, odd harmonics, sub-harmonics, custom harmonics, etc. This device is equipped with 3 epitopes and has a small structure, which is suitable for product research and development, model selection, random inspection, etc. For more product details,please see Energy Meter Test Bench this page :
This test bench can be widely used in measurement centers of start grid, management and electric energy measuring departments of power supply companies, national measurement laboratories, as well as large industrial and mining enterprises and electric meter manufacturers.
The GF3000 series stationary three phase energy meter test bench is a fully automatic system that enables simultaneous, multi-position calibration and verification of three-phase electric energy meters error. Full compatibility with IEC 60736, excellent parameters, superior functionality and outstanding flexibility, It adopt the most advanced electronic measurement technique and modular concept combine the difference three phase reference standards and power amplifier. GF3000 three phase meter test equipment is applied in the measurement centre of grid company energy measurement department of power supply company and energy management utility, industrial enterprise and meter manufacturers.
GF312B portable three phase energy meter calibrator with printer is used to calibrate three phase, single phase, active and reactive energy meters error. And it also can be used as voltage, current and power meter to measure AC parameters of three phase power line. It can measure wave distortion factor and 2nd to 64nd harmonic wave. GF312B calibrator is used for grid corporation of measurement and energy test center, metrological service of power supply bureau, national energy measurement of testing authorities.
Single phase electronic energy meter three phase electronic energy meter sigle phase, three phase din-rail electronic energy meter.
GF312V2 portable three phase multifunction watt-hour meter calibrator on-site is the newest product produced by our company by widely visiting users and referring to the advantages of the same kind of products home and abroad. The measured part of the product adopts high speed A/D transmission to send DSP to conduct digital processing, which largely improves measured degree of accuracy and stability. Central processing part adopts 32-bit ARM embedded technology to make instrument interface novel, function abundant, operation distinct and easy, and performance steady. Class of accuracy: Class 0.02, 0.05 or 0.1, range from 12A/600V or 120A/600V, with comfort design, small size and light weight. The model GF312V2 watt-hour meter calibrator is suit for electric power departments, measuring and quality examining departments and electric lab to field use.