Coconut oil.
Palm fatty acid distillate.
Teak wood logs on 7-10 feet cut pieces in container or small ship loads . Teak logs cut according to customers requirements.
Diethylene glycol is an organic compound. It is a colorless, practically odorless, poisonous, and hygroscopic liquid with a sweetish taste. It is miscible in water, alcohol, ether, acetone, and ethylene glycol. Compared to MEG, it has a higher boiling point, viscosity and specific gravity. Application: Polyester resins, polyurethanes, plasticizers, Antifreeze additive, Unsaturated polyester resins, Softening Agent, Solvents Coupler, Heat transfer agents or fluids, Chemical intermediates etc. Packing: 220 kg Drum, IBC, ISO Tank, Flexi bag. Item Specification Appearance : colorless Purity: 99.8 wt % min MEG: 0.05 wt % max TEG 0.05 wt %: max Water: 0.05 wt % max Colour (pt-Co): 10 max Specific Gravity, 20/20 C: 1.1175-1.1195 5% vol: Min 242 C 95% vol: Max 250 C Acidity (as acetic acid): 50 mg/kg max Ash: 50 mg/kg max
Granular Sulphur, Sulphur content- >99.9%
Green Delayed Petroleum Coke Total Moisture -4,07 % wt Gross Calorific Value (Btu/Lb) 15018 (air dried) Ash -0.67%
Assay 99%
Methanol with the mentioned specifications
Methanol Technical Data Sheet Property Specification Analytical Test Methanol Purity WT % 99.85 min IMPCA 001-21 Water W/W% 0.100 Max ASTM E91064 Ethanol W/W% 0.0050 Max IMPCA 001-21 Specific Gravity 20/20,C 0.7928 Max. ASTM D-4052 Acetone, W/W% 0.0030 Max. IMPCA 001-21 Permanganate Time Test @ 15 C, Minutes 60 Min. ASTM D-1363 Non Volatile Matter, mg/1000 ml 8 Max. ASTM D-1353 Distillation Range @ 760mm Hg C 1.0 Max., ASTM D-1078 Color Pt-Co, APHA 5 Max. ASTM D-1209 Carbonizable APHA 30 Max ASTM E-346 Total Iron, mg/kg 0.10 Max ASTM E-394 Chloride as CI, mg/kg 0.5 Max ASTM D-512 Appearance Clear and free from suspended matter IMPCA 003-98 Acidity as CH3COOH, W/W% 0.0030 Max, ASTM D-1613 Hydrocarbons Pass Test ASTM D-1722 Sulphur mg/kg 0.5Max, ASTM D-5623 Aromatics, UV Test Passes Test IMPCA 004-15
Ci castings, mild steel castings, ss, hss, sg iron, and castings sheet metal components.
Teak wood.
Crude palm kernel oil, RBD palm stearin, palm fatty acid distillate, crude coconut oil, RBD coconut oil, tuna saku, tuna loins, D2 gas.
PFAD, CPO, CPKO, RBD palm stearin, RBD palm oil, prawns, tuna, D2, CNO, RBD coconut oil.
Purity % 99.9 Color, (Pt-Co) (No. before heated) â?¤ addition of acid (heated) â?¤ 5 20 Density, (20)g/cm3 1.1131-1.1136 Water, %(m/m) â?¤ 0.05 Boiling range (0.0.10133Mpa Initial point â?¥ Dry point â?¤ IBP-DP 196 - 2 Acidity (calculated as), % (m/m) â?¤ 0.001 (calculated as formaldehyde), %(m/m) â?¤ 0.0008 Iron calculated as Fe2+), % m/m) â?¤ 0.00001 Ash, % (m/m) â?¤ 0.002 DEG and TEG, % (m/m) 0.1 Chlorine (calculated as chlorine ion), % (m/m) 0.00005 Ultraviolet transmittance % 220nm â?¥ 275nm â?¥ 350nm â?¥ 70 90 98
Eucalyptus logs.
Mustard oil.
Three wheeler and two wheeler auto parts.
Teg Meg And Propylene Glycol.
Pet bottle chip. Meg . Teg.
We are interesting in buying off spec chemicals as follows. We are in Recycle liquid Business. We buy off spec chemical, stock chemical, expired chemicals, and Mixed Glycols, IPO. And Spent Catalyst from chemical and refineries We are interesting in buying off spec Material, Waste chemical to Recover from Process Paint & Printing Industry: Iso Propanol, N- Propanol Ethanol, Methoxy Propanol, Ethyl Acetate, Butyl Acetate, , Methylene Chloride, xylene, & Toulene, Flexo Thinners . Oil and Petrochemicals. MEG, DEG, TEG, Butyl Glycol, Ethyl Glycol, Mono Ethanol Amine And DI-Ethanol , Amines , Solvents, Naphtha Coating Industry: Solvents. and Blastic Chemicals. Copper Slag also interesting in Recycling Process of chemical Expired chemicals, /Paints Solid waste , Waste Water . Solid Waste - Reducing Agents and Oxidising Agent and Liquid Waste : Acid/Base solution, Organic /Inorganci Solution , Heavy metal We sell Recyle Solvents VariousType and Qulaity. Mainly for Paint, Varnish and Coating Industry
