Cone crusher is suitable to crush various kinds of ores and rocks of medium or above medium hardness. Compare with jaw crusher, cone crusher is of stable structure, high efficiency, easy adjustment, economic operation, etc. The spring safety system of crusher acts as an overloading protection system that allows metal to pass through the crushing chamber so as not to damage the cone crusher. The safety system uses dry oil and water as two kinds of sealed formation to make plaster powder and engine oil separate to make sure reliable performance. The type of crushing chamber depends upon size of feeding and fineness of crushed product. The standard type (pyb) is applied to medium crushing, the medium type is applied to medium or fine crushing and the short head type is applied to fine crushing.
Cone crusher features:
1. Our py series cone crusher is of high reduction ratio.
2. Our cone crusher is high performance, low power consumption.
3. Our cone crusher is uniform size products.
4. Our cone crusher has also been used in the secondary and tertiary crushing.
Models: pyb600 ~ pyb2200, pyd600 ~ pyd2200, pyz900 ~ pyz2200
Max input(mm): 35~300
Adjusting range of output (mm): 3~60
Feature and Advantage:
SMH Series Hydraulic Cone Crusher possesses greater superiority than ordinary ones.
1. Larger crushing ratio, high production efficiency, high capacity and excellent product shape.
Crushing ratio and production efficiency is greatly improved as the increase of rated power and capacity with the effort of the combined higher rotate speed and reasonable stroke.
2.Rational construction, advanced crushing principle and technical data, reliable operation and low cost.
All components of crusher are protected by wear resistant materials, which reduces the maintenance cost and increace service life by almost 30%.
3.Lamination crushing principle, excellent product shape:
A prominent increase in fine material ratio and cubic product content, and massive decrease of elongated flaky particle are achieved through selective crushing of material, which results from the replacement of single-particle crushing chamber by special inter-particle-grinding crushing cavity.
4.Shorter down time
Sanme cone crusher adopts hydraulic bolt and overload protecting system, which release the impact force gently when uncrushable material is fed into the cavity and revert to original position after material discharged. The brand-new hydraulic cylinders can discharge the material when the machine stops with load. Hydraulic cone crusher has the advantages of safer, more convenient and shorter down time compared with traditional spring type cone crusher.
5.Thin oil lubricating: reliable, advanced and increases its service life.
Unique oil lubricating system increases the longevity of machine. Non-contact labyrinth sealing element is of high performance, which improves the reliability of dust resisting and fundamentally eliminates the problems caused by oil water mixture appeared in spring type cone crusher.
6.Various crushing cavities meet wide range of product size requirements.
By replacing the mantle and concave plate, the crushing cavity is adjustable, from standard coarse type to short-headed fine type, which meets large range of size requirements.
7.Easy maintenance and operation.
All parts of SMH Hydraulic Cone Crusher can be assembled, disassembled and repaired from the top and side part, including the fixed cone and movable cone. It is no need to disassemble and install the frame, and fasten bolts, so SMH cone crusher is much more convenient and fast for replacing liner plates. The crusher production efficiency will be much better by using the hydraulic motor.
8.Padding free in mantle and concave changing.
SANME hydraulic cone crusher adopts new fixing method of mantle and concave, which is padding free and less time consuming.
* great crushing ration and high production efficiency.
* between-layer crushing and more uniform size fraction of end products.
* lower wear parts consumption and operation cost.
* primary and fine crushing can be achievable just by replacing fixed cone.
* advanced hydraulic technologies realize overload protection and hydraulic adjusting discharge opening, simplify crusher structure and lessen its weight.
* reliable and advanced thin oil lubrication extends service life.
* simple maintenance and convenient operation.
The spring safety system of crusher acts as an overloading protection system that allows metal to pass through the crushing chamber so as not to damage the cone crusher. The safety system uses dry oil and water as two kinds of sealed formation to make plaster powder and engine oil separate to make sure reliable performance. The type of crushing chamber depends upon size of feeding and fineness of crushed product. The standard type (SDY) is applied to medium crushing, the medium type is applied to medium or fine crushing and the short head type is applied to fine crushing.
Features and advantages:
1.Rational structure, advanced crushing principle and technical data, reliable operation and low operation cost.
2.High crushing ratio, high efficiency and high productivity.
3.Reliable spring security system, which can provid effective overload protection.
4.Double-crushing cavity, which meets large range of size requirements.
5.Manual -operating hydraulic discharge opening makes your work easy and economic.
Cone crusher is mainly divided into spring cone crusher, cs series cone crusher, hp series hydraulic cone crusher, py series hydraulic cone crusher.According to the crushing cavity type, cone crusher can be divided into:standard, medium and short head cone crusher.Standard crusher is applied to secondary breaking, medium crusher is used to finely breaking, and short head crusher is also used to finely breaking which break into 5-10mm.Users can purchase depending different requirements.
Features and values
1. A wide range of application
2. Unique hammer attachment system for increasing security
3. Easy to operate and maintain
4. Wide range of hammer and liner materials, including manganese, martensitic, high chrome and ceramic insert
5. It is widely used in quarry, mining, construction, road building, highway and railway construction, Metallurgy and so on.
HPC series cone crusher with high-efficiency and hydraulic pressure was widely used in mining, concrete factory, sandstone making, etc. The machinery's pressure resistance strength is under 350Mpa. And they are widely suitable for primary crushing of many kinds of mining and rock such as many kinds of ores, concrete, fireproof material, bauxite, quartzite, corundum, perlite, ironstone, basalt, etc.
Features and Benefits
1.The new series of HPC cone crusher with high-efficiency and hydraulic pressure equipment is adopted three protecting equipment such as protecting oilcan, locking oilcan and hydraulic driving oilcan. They not only protect the machinery, but could deal with troubles without disassembly the parts.
2.The equipment also can adjust the size of final material. The machinery with high dependability operated very expediently.
3. The crushing chamber specially designed according to particles sink principal and its matching speed can sharply increase the crushing ratio, output and content percentage of cubical product in final crushed material.
4. In the special circumstances such as irons was feed into the crushing chamber together with the materials and there is a jam in the crushing chamber, the hydraulic equipment could open the cover automatically, then the products could output successfully. It greatly reduced the trouble of stopping the machine to output the products artificially. Which makes the maintenance more convenient and with low cost.
5.It is adjusted by hydraulic device and lubricated by the dilute oil. And with locking sleeve assembly, it can overcome the trouble of oil and water being mixed together.
6.The concave and mantle made by high manganese steel. Owing to the change of the concavef+s style and the protect of the crushed products, The abrasion of the machine is reduced greatly and can last long compared with the old cone crusher.
HCS Series cone crusher features
Comparing with other kinds crusher, HCS Series Symons cone crusher have excellences for fine crushing, high productions and low maintenance. The long force arm designed into the HCS Series Symons cone provides greater crushing force.
And the spring release system generates more opposing force than other cone crushers. So use in mine industry widely.
Based on the latest worldly advanced technology, our company designs and produces smh series hydraulic cone crusher. It is widely used in the field of metallurgy, construction, hydroelectric project, road & railway construction, chemical engineering, construction material industry and so on. It is used to crush various hard or medium hard ores and stones. The optimized design of stroke, rotate speed and crushing cavity ensures the high performance of smh cone crusher by increasing the productivity and improving product shape.
Features and advantages
Smh series hydraulic cone crusher possesses greater superiority than ordinary ones:
1. Larger crushing ratio, high production efficiency, productivity and excellent product shape.
Crushing ratio and production efficiency is greatly improved as the increase of power rating and through capacity with the effort of higher rotate speed and stroke.
2. Rational structure, advanced crushing principle and technical data, reliable operation and low cost.
All components of crusher are protected by wear resistant material, which reduces the maintenance cost and increase practical lifetime by 30%.
3. Compressive comminution, excellent product shape.
A prominent increase in fine material ratio and cubic product content, and massive decrease of elongated flaky particle are achieved through
Selective crushing of material, which results from the replacement of single-particle crushing chamber by special inter-particle-grinding crushing cavity.
4. Shorter down time.
Sanme cone crusher adopts hydraulic bolt and overload protecting system, which release the impact force gently when uncrushable material is fed into the cavity and revert to original position after material discharged. The brand-new hydraulic cylinders can discharge the material when the machine stops with load. Hydraulic cone crusher has the advantages of safer, more convenient and shorter down time compared with traditional spring type cone
Crusher.
HCS cone crusher with high-efficiency and single cylinder hydraulic pressure is a kind of high-tech crusher to meet the requirements of developed countries. It is designed by SBM by combining the USA technology and Chinese metal material function.
Cone crusher consist of frame, transmission device, hollow eccentric shaft, bowl-shaped bearing, crushing cone, springs and hydraulic pressure station for adjusting discharge opening.
During operation, the motor drives the eccentric shaft shell to turn around through ahorizontal axle and a pair of bevel gear. The axle of crushing cone swings with the force of eccentric shaft shell so that the surface of the crushing wall is close to the roll mortar wall from time to time. In this way, the ores and rocks will be pressed and crooked and crushed.
SMH series hydraulic cone crusher adopting world advanced technology is designed and made through to be the crusher of world advanced level. it is widely used in metallurgical, architectural, water and electricity, traffic, chemical, architectural material industries. It is suitable for crushing varies of mid hard and above mid hard ores and rocks.
Hydraulic Cone Crusher Feature and Advantage:
(1) Reasonable structure advanced crushing principle and technical specification, reliable work and low cost.
(2) Strong crushing ability; High efficient productivity; High capacity.
(3) Reliable Hydraulic system providing safe and effective overload protection.
(4) Two type of crushing chamber are for wide range of product size requirement.
(5) High automation adopting hydraulic adjustment and hydraulic clean cavity setting.
Hpc series cone crusher with high-efficiency and hydraulic pressure was widely used in mining, concrete factory, sandstone making, etc. Hpc cone crusher is one kind of our crusher with the advanced technology of the same mining equipment. The machineries pressure resistance strength is under 350mpa. And they are widely suitable for primary crushing of many kinds of mining and rock such as many kinds of ores, concrete, fireproof material, bauxite, quartzite, corundum, perlite, ironstone, basalt, etc.
Features and benefits :
1.The new series of hpc cone crusher with high-efficiency and hydraulic pressure equipment is adopted three protecting equipment such as protecting oilcan, locking oilcan and hydraulic driving oilcan. They not only protect the machinery, but could deal with troubles without disassembly the parts.
2.The equipment also can adjust the size of final material. The machinery with high dependability operated very expediently.
3. The crushing chamber specially designed according to particles sink principal and its matching speed can sharply increase the crushing ratio, output and content percentage of cubical product in final crushed material.
4. In the special circumstances such as irons was feed into the crushing chamber together with the materials and there is a jam in the crushing chamber, the hydraulic equipment could open the cover automatically, then the products could output successfully. It greatly reduced the trouble of stopping the machine to output the products artificially. Which makes the maintenance more convenient and with low cost.
The crusher of this series is suitable for crushing various of mid-hard and above mid-hard ores and rocks. Crushing chamber type depends on the kind of product. The standard type (PYB) is applied to medium crushing, the medium type (PYZ) is applied to medium or fine crushing and the shorthead type (PYD) is applied to fine crushing.
Features:
Reliable structure
High productivity
Easy adjustment
Economical
Compound Cone Crusher
Compound Cone Crusher, widely used in the industries of metallurgy, building material, road construction, chemical engineering & silicate, is suitable for crushing all kinds of ores and rocks with medium or above hardness. Compound Cone Crusher is divided into standard type and short-head type. Generally speaking, the standard type has big feeding granularity and relatively coarse discharging granularity, and the short-head type has steep crushing cone and small feeding granularity which is conducive to producing fine particle materials, for this reason,the standard type compound cone crusher is generally used for coarse and medium crushing and the short-headed type compound cone crusher is generally used for medium and fine crushing.
Compound Cone Crusher Features:
It has unique hydraulic clearing system,hydraulic opening adjusting function,easy for changing movable and fixed plate,decreasing management and maintenance cost. It is widely used for medium and fine crushing of granite,basalt,cobble,cobblestone,iron ore etc, which is well received by customers.
Working Principle :
Cone crusher when working, the motor drives the eccentric bearing via the spring coupling, the transmission shaft and a couple of cone gear wheels. The crushing cone axis is forced to swing by the eccentric bearing bushing, which makes the mantle sometimes close to the bowl liner, and sometimes far away from the bowl liner. The raw materials are pressed, impacted and finally crushed in the copper.
Spring Cone Crusher
Spring cone crusher is widely used in the metallurgy, construction, road building, chemical and other industries. It is suitable to crush the high or medium hardness rock and minerals, such as iron ore, cooper ore, limestone, quartz, granite, basalt, dolerite, etc. The type of crushing cavity depends on the usage of rock and minerals: the standard type applies to medium crushing; the medium type applies to fine crushing; the short head type applies to for super fine crushing
Spring Cone Crusher Features:
1.Reasonable structure, low fault rateï¼?low operating cost;
2.Wide application, applying to crush kinds of raw material;
3.Reliable spring protection system can provide safety and efficient protection of overload;
4.Separate automatic oil lubrication system;
5.Low investment cost ,more economic.
Working Principle :
Spring cone crusher consists of frame, transmission device, eccentric hollow shaft, bowl bearing, crushing cone, adjusting device, concave holder, spring, hydraulic pressure station, etc. When the crusher works, the motor drives the eccentric shaft sleeve through the horizontal shaft and a pair of bevel gears. Under the forces of eccentric shaft sleeve, the shaft axis of crushing cone keeps in rotary pendulum moment, so that the space between the mantle and concave will regularly reduce and increase. Meanwhile, the raw materials are crushed under the forces of squeezing and bending.
Hydraulic Cone Crusher
Multi-cylinder hydraulic cone crusher is a kind of modern crusher with high performance. On the basis of spring cone crusher, this kind of crusher obeys the laminated press crushing principle, and adopts the concept of â??more crushing, less grindingâ?? to increase the swing frequency, optimize the crushing cavity and adjust the stroke more reasonably. It is widely used in large beneficiation plant, cement plant, quarry, highway construction, water conservancy project, metallurgical plant, construction industry, etc.
Crushing Features:
1.Higher rotating speed and stroke make production capacity which improved 35%-60%.
2.Better finished product shape.
3.Hydraulic protection and hydraulic cavity clearing, high automatization and less stopping production and repairing time.
4.Thin oil lubrication makes the life time increased.
5.Hydraulic motor makes the adjustment of discharging opening size and replacement of wear parts more convient.
HPT Series High-Efficiency Hydraulic Cone Crusher combines crushing stroke with crushing chamber perfectly, which makes capacity improved and efficiency increased. Besides, hydraulic lubrication control system helps bearing of hydraulic cone crusher get double protection.
Crusher model:
Ð?СÐ?-900, Ð?CÐ?-1200, Ð?CÐ?-1750, Ð?CÐ?-2200
Ð?Ð?Ð?-900, Ð?Ð?Ð?-1200, Ð?Ð?Ð?-1750, Ð?Ð?Ð?-2200
Cone crusher mainly consists of frame, drive shaft, eccentric sleeve, spherical bearing, broken
It consists of a broken cone, adjusting device, adjusting sleeve, spring and cutting port.
During the working process of the cone crusher, the motor drives the eccentric sleeve to rotate by the transmission device, and the moving cone rotates under the eccentric bushing. The section of the moving cone close to the static cone becomes the crushing cavity, and the material is subjected to the moving cone and The static cone is crushed by multiple extrusions and impacts. When the moving cone leaves the section, the material that has been broken to the required particle size falls under its own gravity and is discharged from the bottom of the cone.
Pay attention when working
1, the feed size ratio is appropriate
2. Automatic control device;
3, the crusher discharge to pass
4. Correctly select the crushing chamber for the broken material.
5. Evenly distributed in the 360° range of the crushing chamber
6. The specifications of the conveyor belt are compatible with the maximum output capacity of the crusher;
7. Appropriate selection of sieve specifications for pre-screening and closed-screen screening.
